Stefan Roese [Wed, 12 Aug 2020 11:16:36 +0000 (13:16 +0200)]
global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
With the planned removal of bi_memstart & bi_memsize, this patch now
moves the references to the better suiting gd->ram_base/ram_size
variables.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Roese [Wed, 12 Aug 2020 11:02:39 +0000 (13:02 +0200)]
board_f: Add default values for bi_dram[] in dram_init_banksize()
Remove the bi_memstart / bi_memsize assignment in setup_bdinfo() and
make sure, that bd_dram[] is always configured in the weak default
implementation of dram_init_banksize(), when CONFIG_SYS_SDRAM_BASE is
not set.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Stefan Roese [Wed, 12 Aug 2020 10:57:18 +0000 (12:57 +0200)]
image: Use gd->ram_base/_size in env_get_bootm_size()
Use only gd->ram_base/_size in env_get_bootm_size() instead of bi_dram[]
in some cases and bi_memstart in others.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Roese [Wed, 12 Aug 2020 09:55:46 +0000 (11:55 +0200)]
CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Since commit
86cf1c82850f ("configs: Migrate CONFIG_NR_DRAM_BANKS") &
commit
999a772d9f24 ("Kconfig: Migrate CONFIG_NR_DRAM_BANKS"),
CONFIG_NR_DRAM_BANKS is always defined with a value (4 is default).
It makes no sense to still carry code that is guarded with
"#ifndef CONFIG_NR_DRAM_BANKS" (and similar). This patch removes
all these unreferenced code paths.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Tue, 25 Aug 2020 14:24:40 +0000 (10:24 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel)
- Infrastructure changes to PCI uclass to support these SoC's (Suneel)
- Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel)
- Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
Tom Rini [Tue, 25 Aug 2020 12:19:41 +0000 (08:19 -0400)]
Merge tag 'i2c-bugfixes-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c
i2c bugfixes for v2020.10
- fix some issues with octeon_i2c driver on ARM Octeon TX2
- fix link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x
Tom Rini [Tue, 25 Aug 2020 12:19:14 +0000 (08:19 -0400)]
Merge tag 'u-boot-rockchip-
20200820' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3399 evb sdcard support
- Fix for SPL_LED support
Tom Rini [Tue, 25 Aug 2020 12:18:50 +0000 (08:18 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Sipeed Maix support S-mode.
- Provide command sbi.
- Use fdtdec_get_addr_size_auto_parent to get fu540 cache base address.
- Fix a compiler error with CONFIG_SPL_SMP=n.
- Fix sifive ram driver 32 compiler warnings.
- Fix kendryte/pll.h redefine nop() warning.
Tom Rini [Tue, 25 Aug 2020 00:24:21 +0000 (20:24 -0400)]
Merge branch '2020-08-24-misc-improvements'
- Squashfs compression support
- Coverity fixes
- XEN guest updates
- Finish previous MediaTek updates
- Arm Total Compute platform support
Stefan Roese [Tue, 25 Aug 2020 06:53:30 +0000 (08:53 +0200)]
x86: qemu-x86_defconfig: Increase CONFIG_SYS_MALLOC_F_LEN
With the upcoming increase of the malloc area in U-Boot
("pci: pci-uclass: Dynamically allocate the PCI regions"), the CI QEMU
x86 test fails:
U-Boot 2020.10-rc2-g0a668f6d38 (Aug 25 2020 - 06:12:51 +0000)
alloc space exhausted
Error binding driver 'cpu_qemu': -12
Some drivers failed to bind
alloc space exhausted
initcall sequence
fff6a760 failed at call
fff13b3d (err=-19)
This patch now increases CONFIG_SYS_MALLOC_F_LEN to 0x1000, which is
already used on qemu-x86_64_defconfig.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sun, 20 Oct 2019 01:47:37 +0000 (18:47 -0700)]
arm: octeontx2: Add support for OcteonTX2 SoC platforms
This patch adds support for all OcteonTX2 96xx/95xx
boards from Marvell.
For 96xx boards, use octeontx_96xx_defconfig and
for 95xx boards, use octeontx_95xx_defconfig.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Suneel Garapati [Sun, 20 Oct 2019 01:37:55 +0000 (18:37 -0700)]
arm: octeontx: Add support for OcteonTX SoC platforms
This patch adds support for all OcteonTX 81xx/83xx
boards from Marvell.
For 81xx boards, use octeontx_81xx_defconfig and
for 83xx boards, use octeontx_83xx_defconfig.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Suneel Garapati [Mon, 21 Oct 2019 23:09:36 +0000 (16:09 -0700)]
watchdog: Add reset support for OcteonTX / TX2
Adds support for Core 0 watchdog poke on OcteonTX and OcteonTX2
platforms.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Suneel Garapati [Sun, 20 Oct 2019 01:03:01 +0000 (18:03 -0700)]
mmc: Add MMC controller driver for OcteonTX / TX2
Adds support for MMC controllers found on OcteonTX or
OcteonTX2 SoC platforms.
Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Peng Fan <peng.fan@nxp.com>
Suneel Garapati [Sun, 20 Oct 2019 00:28:01 +0000 (17:28 -0700)]
pci: Add PCI controller driver for OcteonTX / TX2
Adds support for PCI ECAM/PEM controllers found on OcteonTX
or OcteonTX2 SoC platforms.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sun, 20 Oct 2019 00:48:25 +0000 (17:48 -0700)]
ata: ahci: Add BAR index quirk for Cavium PCI SATA device
For SATA controller found on OcteonTX SoC's, use non-standard PCI BAR0
instead of BAR5.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Suneel Garapati [Sun, 20 Oct 2019 01:35:54 +0000 (18:35 -0700)]
arm: octeontx2: Add headers for OcteonTX2
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Suneel Garapati [Sun, 20 Oct 2019 01:32:33 +0000 (18:32 -0700)]
arm: octeontx: Add headers for OcteonTX
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Suneel Garapati [Sun, 20 Oct 2019 00:20:27 +0000 (17:20 -0700)]
arm: include/asm/io.h: Add 64bit clrbits and setbits helpers
Add 64bit API for clrbits and setbits.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Suneel Garapati [Tue, 5 May 2020 04:25:25 +0000 (21:25 -0700)]
pci: pci-uclass: Check validity of ofnode
Add check if the referenced ofnode is valid.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Thu, 24 Oct 2019 01:40:36 +0000 (18:40 -0700)]
pci: pci-uclass: Add support for Alternate-RoutingID capability
If ARI capability is found on device, use it to update next function
number in bus scan and also helps to skip unnecessary bdf scans.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sat, 19 Oct 2019 23:34:16 +0000 (16:34 -0700)]
pci: pci-uclass: Add VF BAR map support for Enhanced Allocation
Makes dm_pci_map_bar API available to map BAR for Virtual function
PCI devices which support Enhanced Allocation.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sat, 19 Oct 2019 23:07:20 +0000 (16:07 -0700)]
pci: pci-uclass: Add support for Single-Root I/O Virtualization
SR-IOV - Single Root I/O Virtualization
PF - Physical Function VF - Virtual Function
If SR-IOV capability is present, use it to initialize Virtual Function
PCI device instances. pci_sriov_init function will read SR-IOV
registers to create VF devices under the PF PCI device and also bind
driver if available. This function needs to be invoked from Physical
function device driver which expects VF device support, creating
minimal impact on existing framework.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sat, 19 Oct 2019 22:52:32 +0000 (15:52 -0700)]
pci: pci-uclass: Add support for Enhanced Allocation in Bridges
If Enhanced Allocation capability is present in bridges, use it
to read the fixed sub-ordinate bus number.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sun, 20 Oct 2019 00:10:20 +0000 (17:10 -0700)]
pci: pci-uclass: Add multi entry support for memory regions
Enable PCI memory regions in ranges property to be of multiple entry.
This helps to add support for SoC's like OcteonTX/TX2 where every
peripheral is on PCI bus.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Trommel, Kees (Contractor) [Mon, 3 Aug 2020 14:49:47 +0000 (14:49 +0000)]
Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x
Fix for the case of a U-Boot configuration with CONFIG_SPL,
CONFIG_I2C_MUX, CONFIG_I2C_MUX_PCA954x, no CONFIG_SPL_DM and no
CONFIG_SPL_I2C_MUX. Without this fix linking of pca954x fails because
dm_write_i2c does not exist because CONFIG_SPL_DM is not defined.
Signed-off-by: Kees Trommel <kees.trommel.contractor@draeger.com>
Cc: Heiko Schocher <hs@denx.de>
Stefan Roese [Thu, 23 Jul 2020 12:09:36 +0000 (14:09 +0200)]
i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support
This patch fixes a few issues noticed, when testing this new driver on
ARM Octeon TX2 again. Here the details:
- Remove "common.h" header inclusion
- Use correct THP define on Octeon TX2
- Octeon TX2 uses the same compatible as Octeon TX. We can't distinguish
both platforms this way. Remove the unused "cavium,thunder2-99xx-twsi"
compatible and add a check to the Octeon TX2 specific
"cavium,thunderx-i2c" so that the correct driver data is selected.
- Removed "struct pci_device_id" definition and U_BOOT_PCI_DEVICE()
as its not needed for the PCI based probing on Octeon TX2
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Suneel Garapati <sgarapati@marvell.com>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Suneel Garapati [Sat, 19 Oct 2019 23:02:48 +0000 (16:02 -0700)]
pci: pci-uclass: Make DT subnode parse optional
Parse subnode DT properties only if parent node is valid.
Otherwise, assert is triggered on ofnode_valid in ofnode_first_subnode
from dev_for_each_subnode.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Suneel Garapati [Sat, 19 Oct 2019 23:44:35 +0000 (16:44 -0700)]
pci: pci-uclass: Fix incorrect argument in map_physmem
Fix argument ordering for map_physmem() called in dm_pci_map_ea_bar().
Additinally minor spelling correction.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Stefan Roese [Thu, 23 Jul 2020 14:34:10 +0000 (16:34 +0200)]
pci: pci-uclass: Dynamically allocate the PCI regions
Instead of using a fixed length pre-allocated array of regions, this
patch moves to dynamically allocating the regions based on the number
of available regions plus the necessary regions for DRAM banks.
Since MAX_PCI_REGIONS is not needed any more, its removed completely
with this patch.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Stefan Roese [Thu, 6 Aug 2020 15:49:49 +0000 (17:49 +0200)]
ARM: renesas: Drop unnecessary function ft_board_setup()
Marek explained on IRC, that ft_board_setup() is not used / necessary
at all. So its best to just drop it completely, as it interferes with
the cleanup of CONFIG_MAX_PCI_REGIONS (completely removed).
Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Roese [Thu, 23 Jul 2020 14:26:07 +0000 (16:26 +0200)]
pci: pci-uclass: Remove #ifdef CONFIG_NR_DRAM_BANKS as its always set
Since the migration to Kconfig, CONFIG_NR_DRAM_BANKS is configured for
all boards. Hence we can remove the conditional compilation and the code
path that will never get compiled.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Stefan Roese [Wed, 5 Aug 2020 11:56:11 +0000 (13:56 +0200)]
dm: core: Add API to read PCI bus-range property
Add dev_read_pci_bus_range() to read bus-range property values
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Suneel Garapati [Sat, 19 Oct 2019 22:19:35 +0000 (15:19 -0700)]
fdtdec: Add API to read pci bus-range property
Add fdtdec_get_pci_bus_range to read bus-range property
values.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Thu, 20 Aug 2020 17:43:39 +0000 (19:43 +0200)]
cmd: provide command sbi
Provide a command to display information about the SBI implementation.
The output might look like:
=> sbi
SBI 0.2
OpenSBI
Extensions:
sbi_set_timer
sbi_console_putchar
sbi_console_getchar
sbi_clear_ipi
sbi_send_ipi
sbi_remote_fence_i
sbi_remote_sfence_vma
sbi_remote_sfence_vma_asid
sbi_shutdown
SBI Base Functionality
Timer Extension
IPI Extension
RFENCE Extension
Hart State Management Extension
The command can be used to construct a unit test checking that the
communication with the SEE is working.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Tested-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tested-by: Rick Chen <rick@andestech.com>
Heinrich Schuchardt [Mon, 17 Aug 2020 10:35:39 +0000 (12:35 +0200)]
configs: defconfig for Sipeed Maix in S-mode
Provide a defconfig that can be used to build U-Boot for the Maix boards
running upon OpenSBI.
Update the documentation.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Heinrich Schuchardt [Sat, 15 Aug 2020 07:49:26 +0000 (09:49 +0200)]
riscv: fix building with CONFIG_SPL_SMP=n
Building with CONFIG_SPL_SMP=n results in:
arch/riscv/lib/spl.c: In function ‘jump_to_image_no_args’:
arch/riscv/lib/spl.c:33:6:
error: unused variable ‘ret’ [-Werror=unused-variable]
33 | int ret;
| ^~~
Define the variable ret as __maybe_unused.
Fixes:
191636e44898 ("riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL")
Fixes:
8c59f2023cc8 ("riscv: add SPL support")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Heinrich Schuchardt [Tue, 28 Jul 2020 15:52:23 +0000 (17:52 +0200)]
clk: kendryte/pll.h: do not redefine nop()
The kendryte PLL code uses nop as barrier. The macro is not defined for
the sandbox on x86 but is defined on RISC-V.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Bin Meng [Tue, 18 Aug 2020 08:09:21 +0000 (01:09 -0700)]
ram: sifive: Fix compiler warnings for 32-bit
priv->info.size is of type 'size_t' but the length modifier is l.
Fix this by casting priv->info.size. Note 'z' cannot be used as
the modifier as SPL does not support that.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Bin Meng [Tue, 18 Aug 2020 08:09:20 +0000 (01:09 -0700)]
riscv: fu540: Use correct API to get L2 cache controller base address
At present fdtdec_get_addr() is used to get L2 cache controller base
address. This only works for a fixed #address-cells and #size-cells.
Change to use fdtdec_get_addr_size_auto_parent() instead.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Tom Rini [Mon, 24 Aug 2020 21:28:18 +0000 (17:28 -0400)]
Merge tag 'efi-2020-10-rc3-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2020-10-rc3 (3)
The following bug fixes are contained in this pull-request:
* ResetSystem() should no hang if not implemented.
* Device paths in Bootxxxx variables should be verified.
* Use ':' as separator for command setenv -e -i instead of ','.
* Correct comments for functions.
* Update UEFI documentation.
Anastasiia Lukianenko [Fri, 21 Aug 2020 09:10:04 +0000 (12:10 +0300)]
xen: Code style conformity
Cleaning up the following:
ERROR: do not use assignment in if condition
#281: FILE: drivers/xen/pvblock.c:260:
+ if ((err = xenbus_switch_state(XBT_NIL, nodename,
CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "err"
#52: FILE: drivers/xen/pvblock.c:298:
+ if (err != NULL) {
ERROR: do not use assignment in if condition
#176: FILE: drivers/xen/gnttab.c:103:
+ if ((flags = nflags) & (GTF_reading | GTF_writing)) {
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#329: FILE: include/xen/gnttab.h:1:
+/*
WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead
#330: FILE: include/xen/gnttab.h:2:
+ * SPDX-License-Identifier: GPL-2.0
ERROR: do not use assignment in if condition
#630: FILE: lib/sscanf.c:558:
+ if ((n = inr) < width) {
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Fri, 21 Aug 2020 09:10:03 +0000 (12:10 +0300)]
board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Fri, 21 Aug 2020 09:10:02 +0000 (12:10 +0300)]
board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig
CONFIG_CMD_RUN is set on by default in Kconfig.
Create xenguest_arm64_defconfig by using savedefconfig to avoid unnecessary
options.
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Fri, 21 Aug 2020 09:10:01 +0000 (12:10 +0300)]
MAINTAINERS: Add maintainers to XEN section
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Fri, 21 Aug 2020 09:10:00 +0000 (12:10 +0300)]
board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:58 +0000 (16:37 +0200)]
arm: dts: mt7623: add USB nodes
This adds USB nodes for MT7623/BPI-R2
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:57 +0000 (16:37 +0200)]
arm: dts: mt7622: add USB nodes
Add DTS nodes for MT7622/BPI-R64
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:56 +0000 (16:37 +0200)]
arm: dts: rename mt7622-bpi-r64.dts
rename mt7622-bpi-r64.dts to mt7622-bananapi-bpi-r64.dts
to follow naming convensions
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:55 +0000 (16:37 +0200)]
clk: mt7622: add needed clocks for ssusb-node
MT7622 needs additional clock definitions to work properly
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:54 +0000 (16:37 +0200)]
ahci: mediatek: fix copyright and author-lines
after review of sam copyright should be on one line and link should
not between author lines
just remove the link and put ryder first as he is author of linux-driver
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:53 +0000 (16:37 +0200)]
reset: drop unnecessary comment for pciesys
after review from sam this comment should be removed
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 20 Aug 2020 14:37:52 +0000 (16:37 +0200)]
phy: mtk-tphy: make shared reg optional for v1
make the shared reg optional when version is v1 for sata
Suggested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Joao Marcos Costa [Wed, 19 Aug 2020 16:28:41 +0000 (18:28 +0200)]
fs/squashfs: Fix Coverity Scan defects
Fix defects such as uninitialized variables and untrusted pointer
operations. Most part of the tainted variables and the related defects
actually comes from Linux's macro get_unaligned_le**, extensively used
in SquashFS code. Add sanity checks for those variables.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
AKASHI Takahiro [Wed, 19 Aug 2020 09:07:32 +0000 (18:07 +0900)]
virtio_blk: set log2blksz correctly
'log2blksz' in blk_desc structure must always be initialized, otherwise
it will cause a lot of weird failures in file operations.
For example, fs_set_blk_dev[_with_part]() examines a block device against
every file system with its probe function. In particular, ext4 file
system's ext4_probe() will calls fs_devread() to fetch a super block.
If log2blksz is 0, the actual 'read' size, i.e. block_len >> log2blksz, is
much bigger than a buffer's size, and it can end up with memory corruption.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Fixes:
f4802209e59d ("virtio: Add block driver support")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Joao Marcos Costa [Tue, 18 Aug 2020 15:17:25 +0000 (17:17 +0200)]
test/py: Add tests for LZO and ZSTD
Improve SquashFS tests architecture. Add 'Compression' class. LZO
algorithm may crash if the file is fragmented, so the fragments are
disabled when testing LZO.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Joao Marcos Costa [Tue, 18 Aug 2020 15:17:24 +0000 (17:17 +0200)]
fs/squashfs: add support for LZO decompression
Add call to lzo's lzo1x_decompress_safe() into sqfs_decompress().
U-Boot's LZO sources may still have some unsolved issues that could make the
decompression crash when dealing with fragmented files, so those should be
avoided. The "-no-fragments" option can be passed to mksquashfs.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Joao Marcos Costa [Tue, 18 Aug 2020 15:17:23 +0000 (17:17 +0200)]
fs/squashfs: add support for ZSTD decompression
Add call to ZSTD's ZSTD_decompressDCtx(). In this use case, the caller
can upper bound the decompressed size, which will be the SquashFS data
block (or metadata block) size, so there is no need to use streaming
API. Add ZSTD's worskpace to squashfs_ctxt structure.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Joao Marcos Costa [Tue, 18 Aug 2020 15:17:22 +0000 (17:17 +0200)]
fs/squashfs: replace sqfs_decompress() parameter
Replace 'u16 comp_type' by a reference to squashfs_ctxt structure.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Joao Marcos Costa [Tue, 18 Aug 2020 15:17:21 +0000 (17:17 +0200)]
fs/squashfs: Add init and clean-up functions to decompression
Add sqfs_decompressor_init() and sqfs_decompressor_cleanup(). These
functions are called respectively in sqfs_probe() and sqfs_close(). For
now, only ZSTD requires an initialization logic. ZSTD support will be
added in a follow-up commit.
Move squashfs_ctxt definition to sqfs_filesystem.h. This structure is
passed to sqfs_decompressor_init() and sqfs_decompressor_cleanup(), so
it can no longer be local to sqfs.c.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
John Chau [Mon, 17 Aug 2020 07:53:01 +0000 (15:53 +0800)]
cmd: fix clone coverity scan
This patch fixes coverity scan MISSING_BREAK issues, and also an error
on block size check.
Signed-off-by: John Chau <john@harmon.hk>
Michal Simek [Thu, 13 Aug 2020 10:43:22 +0000 (12:43 +0200)]
firmware: psci: Do not bind driver if U-Boot runs in EL3
There is no reason to bind psci driver if U-Boot runs in EL3 because
SMC/HVC instructions can't be called. That's why detect this state and
don't let user to crash from prompt by performing reset or poweroff
commands (if enabled).
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Usama Arif [Wed, 12 Aug 2020 15:12:53 +0000 (16:12 +0100)]
board: armltd: Add support for Total Compute platform
Total Compute is based on ARM architecture and has
the following features enabled in u-boot:
- PL011 UART
- PL180 MMC
- NOR Flash
- FIT image with Signature
- AVB
Signed-off-by: Usama Arif <usama.arif@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Usama Arif [Tue, 11 Aug 2020 14:46:03 +0000 (15:46 +0100)]
avb: Make AVB independent of fastboot
AVB only uses CONFIG_FASTBOOT_BUF_ADDR from fastboot for memory.
This memory is used for assigning temporary buffers.
This can be assigned a new variable and used as CONFIG_AVB_BUF_ADDR.
This is to support future boards that support AVB but dont support
USB and therefore dont support FASTBOOT.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Cc: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com>
[trini: Change defaults]
Signed-off-by: Tom Rini <trini@konsulko.com>
Heinrich Schuchardt [Mon, 24 Aug 2020 06:27:49 +0000 (08:27 +0200)]
efi_loader: use ':' as separator for setenv -i
setenv -e -i <address>,<filesize> can be used to set a UEFI variable
from memory.
For separating an address and a size we use ':' in most commands.
Let's do the same for setenv -e -i.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 23 Aug 2020 08:59:17 +0000 (10:59 +0200)]
efi_loader: validate device path length in boot manager
Bootxxxx variables are provided by the user and therefore cannot be
trusted. We have to validate them before usage.
A device path provided by a Bootxxxx variable must have an end node within
the indicated device path length.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 23 Aug 2020 08:53:50 +0000 (10:53 +0200)]
test: unit test for efi_dp_check_length()
Provide a unit test for function efi_dp_check_length().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 23 Aug 2020 08:49:46 +0000 (10:49 +0200)]
efi_loader: efi_dp_check_length()
We need to check that device paths provided via UEFI variables are not
malformed.
Provide function efi_dp_check_length() to check if a device path has an
end node within a given number of bytes.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 23 Aug 2020 07:54:44 +0000 (09:54 +0200)]
include: kernel.h: define SSIZE_MAX
Define SSIZE_MAX, the largest value fitting into a variable of type
ssize_t.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 22 Aug 2020 07:14:56 +0000 (09:14 +0200)]
efi_selftest: substitute ResetSystem() by do_reset()
If ResetSystem() is not implemented at runtime, call do_reset() after
test completion.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 20 Aug 2020 10:16:54 +0000 (12:16 +0200)]
efi_selftest: add a test for ResetSystem()
The unit test will reset the system by calling the ResetSystem() runtime
service before or after ExitBootServices() according to the users choice
by setting environment variable efi_selftest to:
* 'reset system' or
* 'reset system runtime'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 22 Aug 2020 06:29:53 +0000 (08:29 +0200)]
efi_loader: ResetSystem() should not hang
If ResetSystem() is not implemented at runtime, it should return instead
of hanging in an endless loop. This allows the operating system to reset
the system by other means as Linux does. It also matches what EDK II
suggests in comments for functions ResetShutdown() and ResetWarm() in
OvmfPkg/Library/ResetSystemLib/ResetSystemLib.c.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 16 Aug 2020 10:27:19 +0000 (12:27 +0200)]
doc: update UEFI documentation
* UEFI variables can be persisted
* describe that the sequence of files loaded before bootefi matters
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Aug 2020 21:09:35 +0000 (23:09 +0200)]
efi_loader: remove empty comment line
Remove a line leading to a warning in make htmldocs.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Aug 2020 21:10:22 +0000 (23:10 +0200)]
efi_loader: document parameters of do_bootefi_exec()
Add the missing description of the load_options parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Mon, 24 Aug 2020 13:06:02 +0000 (09:06 -0400)]
Merge tag 'u-boot-clk-24Aug2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Add CCF clocks definitions for iMX6Q enet (ETH)
- Several fixes for CCF framework - the most notable is the one, which
adds get_rate helper to clk-mux.c
- Improvements for clk command - better visibility and alignment.
Lukasz Majewski [Mon, 24 Aug 2020 09:12:18 +0000 (11:12 +0200)]
clk: ccf: Add missing #include <dm/uclass.h> to clk-mux.c
After adding custom get_rate helper function it was necessary to include
<dm/uclass.h> to avoid warnings about missing uclass_get_device_by_name.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Series-to: u-boot
Patrick Delaunay [Thu, 30 Jul 2020 12:04:10 +0000 (14:04 +0200)]
cmd: clk: correctly handle depth for clk dump
Update depth only when clock uclass is found to have correct display
of command "clk dump".
Without this patch, the displayed depth is the binding depth for
all the uclass and that can be strange as only clock uclass nodes
are displayed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Thu, 30 Jul 2020 12:04:09 +0000 (14:04 +0200)]
cmd: clk: cosmetic: correct code alignment in show_clks
Correct code alignment in show_clks() function.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Dario Binacchi [Wed, 3 Jun 2020 13:36:25 +0000 (15:36 +0200)]
clk: ccf: mux: change the get_rate helper
The previous version of the get_rate helper does not work if the mux
clock parent is changed after the probe. This error has not been
detected because this condition has not been tested. The error occurs
because the set_parent helper does not change the parent of the clock
device but only the clock selection register. Since changing the parent
of a probed device can be tricky, the new version of the get_rate helper
provides the rate of the selected clock and not that of the parent.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 2 May 2020 15:58:33 +0000 (17:58 +0200)]
clk: ccf: mux: fix access to the sandbox register
The tests developed for the mux clock are run on the sandbox. They don't
call the clk_mux_set_parent routine and therefore they do not detect
this error.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 2 May 2020 15:58:32 +0000 (17:58 +0200)]
clk: ccf: mux: fix typo
Close the opening bracket.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 2 May 2020 15:58:31 +0000 (17:58 +0200)]
clk: ccf: mux: change include order
Apply u-boot coding style on include files order.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 2 May 2020 15:38:11 +0000 (17:38 +0200)]
clk: fix the console output of clk_register
The parent->name variable can be used only in case the
uclass_get_device_by_name routine returns successfully.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Mon, 13 Apr 2020 12:36:27 +0000 (14:36 +0200)]
clk: set flags in the ccf registration routines
The top-level framework flags are passed as parameter to the common
clock framework (ccf) registration routines without being used.
Checks of the flags setting added by the patch have been added in the
ccf test.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Mon, 13 Apr 2020 12:36:26 +0000 (14:36 +0200)]
dm: test: clk: add the test for the ccf gated clock
Unlike the other clock types, in the case of the gated clock, a new
driver has been developed which does not use the registering routine
provided by the common clock framework.
The addition of the ecspi0 clock to sandbox therefore allows testing
the ccf gate clock.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Mon, 24 Feb 2020 13:55:26 +0000 (14:55 +0100)]
clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clock
After commit
673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all
NXP boards, which are not IMX8 and in the same time are supporting CCF need
to provide PTP clock.
On the i.MX6Q this clock is provided with IMX6QDL_CLK_ENET_REF in the Linux
kernel's CCF.
Code in this change models the simplest case when enet reference clock is
generated from 'osc' clock.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Mon, 24 Feb 2020 13:55:25 +0000 (14:55 +0100)]
clk: imx: Add support for pllv3 enet clock
This code has been ported from Linux kernel v5.5.5 (tag) and has been
adjusted to U-Boot's DM.
It adds support for correct recognition of IMX_PLLV3_ENET flag in the
clk-pllv3.c driver.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Mon, 24 Feb 2020 13:55:24 +0000 (14:55 +0100)]
clk: imx6: Add definition for IMX6QDL_CLK_ENET clock
After commit
673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all
NXP boards, which are not IMX8 and in the same time are supporting CCF
need to provide IMX6QDL_CLK_ENET.
This change defines the missing clock in i.MX6Q's CCF.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Heinrich Schuchardt [Sat, 15 Feb 2020 20:27:38 +0000 (21:27 +0100)]
clk: ICS8N3QV01 remove superfluous code
Do not calculate a unused value of n which is overwritten in both branches
of the subsequent if statement.
Identified by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tom Rini [Sun, 23 Aug 2020 20:06:38 +0000 (16:06 -0400)]
Merge tag 'dm-pull-22aug20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm
replace devfdt_get_addr_ptr() with dev_read_addr_ptr()
binman fixes for portage
various minor fixes
'bind' command improvements
Tom Rini [Sun, 23 Aug 2020 19:53:10 +0000 (15:53 -0400)]
Merge branch '2020-08-21-stdio-cleanup'
- Clean up common/stdio.c and migrate some related options to Kconfig
Simon Glass [Tue, 11 Aug 2020 17:23:41 +0000 (11:23 -0600)]
stdio: Tidy up the coding style
Bring the coding style in this file up to the current level.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:40 +0000 (11:23 -0600)]
stdio: Drop brackets around &devs.list
These brackets are not needed. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:39 +0000 (11:23 -0600)]
stdio: Update to use compiler for Kconfig checks
Drop use of the preprocessor where possible.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:38 +0000 (11:23 -0600)]
stdio: Drop #ifdefs in the header file
These prevent the use of IS_ENABLED() and are unnecessary. Drop them and
fix a few code-style nits nearby.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:37 +0000 (11:23 -0600)]
stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV
Now that this is in Kconfig we can move the logic at the top of the file
to Kconfig, and use if() instead of #if. Update the file with these
changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:36 +0000 (11:23 -0600)]
Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_DEVICE_NULLDEV
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:35 +0000 (11:23 -0600)]
Convert CONFIG_SPLASH_SCREEN et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPLASH_SCREEN
CONFIG_SPLASH_SCREEN_ALIGN
CONFIG_SPLASHIMAGE_GUARD
CONFIG_SPLASH_SOURCE
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 11 Aug 2020 17:23:34 +0000 (11:23 -0600)]
moveconfig: Skip binary and ELF files
Add a few more file extensions to the list of files that should not be
processed. This avoids unicode errors, for example.
Signed-off-by: Simon Glass <sjg@chromium.org>