Matthew Netsch [Sun, 23 Jan 2022 01:56:51 +0000 (01:56 +0000)]
Merge vk-gl-cts/vulkan-cts-1.3.0 into vk-gl-cts/vulkan-cts-1.3.1
Change-Id: I262c53439a37757a2b000b0529f74f5da064b84c
Antto Mäkinen [Tue, 14 Dec 2021 14:29:28 +0000 (16:29 +0200)]
Additions to VARYING_SUBGROUP_SIZE and FULL_SUBGROUPS_BIT tests
The behavior in VK_EXT_subgroup_size_control is assumed by default when
using SPIR-V 1.6. This CL adds variants of the existing tests for
subgroup_size_control where instead of adding these flags, a SPIR-V 1.6
module is used.
VK-GL-CTS issue: 3072
New Tests:
dEQP-VK.subgroups.size_control.*_spirv16
Components: Vulkan
Change-Id: I374f56e4ff8f6d971785a53e50667214cc536689
Matthew Netsch [Sat, 22 Jan 2022 18:30:18 +0000 (13:30 -0500)]
Update vulkan-docs to main
Components: Framework, Vulkan
Affects:
dEQP-VK.*
Change-Id: I930c36d5c7bc50cb62f130cac58731c294b6f687
Matthew Netsch [Sat, 22 Jan 2022 18:18:42 +0000 (13:18 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.8 into vk-gl-cts/vulkan-cts-1.3.0
Change-Id: I6be2d3495b8e5badf3441ba4a40b4b1f8163f2de
James Fitzpatrick [Wed, 19 Jan 2022 11:46:20 +0000 (11:46 +0000)]
Relax precision for matrix precision tests
The Vulkan spec does not specify the precision for inverse and
determinant built in functions, however newly added tests effecitively
adds a precision requirement for them.
The precision required in these tests is too high for some valid
implementations of these builtin functions.
Relax the precision required in the tests to allow valid
implementations to pass.
Affects:
dEQP-VK.glsl.builtin.precision*.determinant.*
dEQP-VK.glsl.builtin.precision*.inverse.*
Compontents: vulkan
VK-GL-CTS issue: 3182
Change-Id: Ib4c5b9d04578732456b8f981bc82a2c86ad877fa
Shih-hsin Li [Mon, 17 Jan 2022 04:33:09 +0000 (04:33 +0000)]
Skip the "two_draw" variants of zero_stride_with_offset tests
There's only one vertex in vertex array for singleVertex config.
Non-zero stride can cause out of bound memory access error since
vkd.cmdDraw draws 6(singleVertexDrawCount) vertices in singleVertex
config.
Affects:
dEQP-VK.pipeline.extended_dynamic_state.*.zero_stride_with_offset
Components: Vulkan
VK-GL-CTS issue: 3463
Change-Id: I77baa395c40f74f518bc9c7e8daf32c87686868a
Matthew Netsch [Sat, 22 Jan 2022 16:26:06 +0000 (11:26 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.7 into vk-gl-cts/vulkan-cts-1.2.8
Change-Id: I4e8734003d9e689045fd25601bc521a4fb119f0b
Matthew Netsch [Fri, 21 Jan 2022 21:36:09 +0000 (16:36 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.6 into vk-gl-cts/vulkan-cts-1.2.7
Change-Id: Iab61e615b3f7d5b108d925150255a73171e3d438
Matthew Netsch [Fri, 21 Jan 2022 17:33:04 +0000 (12:33 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.5 into vk-gl-cts/vulkan-cts-1.2.6
Change-Id: If56557dcb21ca8bfd90acbb2fffbd3f8ceed16f2
Mika Väinölä [Tue, 11 Jan 2022 07:45:02 +0000 (09:45 +0200)]
Re-enable Clang warning for Amber
The Amber version used by vulkan-cts-1.2.5 and later includes 4d0115c
which should fix all suggest-destructor-override warnings.
Components: Framework, Vulkan
VK-GL-CTS issue: 3361
Change-Id: I36437c797c067521e1444d20cfece33babfe435a
Mika Väinölä [Thu, 13 Jan 2022 08:00:09 +0000 (10:00 +0200)]
GCC 11 build fixes
Some files used std::numeric_limits without including <limits> and
failed to compile.
VK-GL-CTS issue: 2842
Change-Id: I21e37ce38db08c7c7041f4628ac852588a788852
Matthew Netsch [Thu, 20 Jan 2022 21:10:44 +0000 (21:10 +0000)]
Merge vk-gl-cts/vulkan-cts-1.2.4 into vk-gl-cts/vulkan-cts-1.2.5
Change-Id: I790e54266657e91c84b9e40f6eb7385914d569c6
Ilkka Saarelainen [Wed, 17 Feb 2021 11:33:22 +0000 (13:33 +0200)]
Decrease required subgroup size
dEQP-VK.spirv_assembly.instruction.spirv1p4.entrypoint.comp_workgroup_entry_point
test assumed that the subgroupSize is >= 8. The test failed if the
supported subgroupSize is less than 8.
This CL lowers the required subgroup size to 4.
Affects:
dEQP-VK.spirv_assembly.instruction.spirv1p4.entrypoint.comp_workgroup_entry_point
Components: Vulkan
VK-GL-CTS issue: 2698
Change-Id: I9931dab7a57c0b6b73530e72bca0c0d9cc90f87d
(cherry picked from commit
8f9b9137470ed5b0cd0b38edd9e9c28ccf565731)
Jari Komppa [Tue, 11 Jan 2022 14:58:31 +0000 (16:58 +0200)]
Fix for potentially uninitialized variables
This change adds a constructor for a struct which sets the members that
do not have a constructor of their own to known values.
This potentially affects anything that uses the reference rasterizer,
but should not change any test results.
Affects:
*
Components: Framework
VK-GL-CTS issue: 3434
Change-Id: Ie874b4baa4d2ff5a8aa66f9ea2c3cd11b37edb64
Matthew Netsch [Thu, 20 Jan 2022 17:01:38 +0000 (17:01 +0000)]
Merge vk-gl-cts/vulkan-cts-1.2.3 into vk-gl-cts/vulkan-cts-1.2.4
Change-Id: I3080cbdc60602f0faea714502bbc5461cac257e0
Mika Väinölä [Fri, 17 Dec 2021 07:10:19 +0000 (09:10 +0200)]
Fix NULL/False to std::string conversion errors
Newer versions of GCC reject std::string(DE_NULL). Previously this
didn't cause any errors or warnings when compiling, but should produce
an error at runtime. This change replaces invalid values with empty
string literals and adds deFatalStr for cases that potentially
relied on the string constructor throwing an exception.
Components: Framework, OpenGL, Vulkan
VK-GL-CTS issue: 3419
Change-Id: I68ec7d1447d1e96f5d7841e0684687cdd294fe39
Sean Risser [Fri, 30 Apr 2021 17:02:57 +0000 (13:02 -0400)]
Require geometry shaders for adjacency topologies
Clipping tests would use adjacency topologies with drivers that didn't
support geometry shaders.
Components: Vulkan
Affects: dEQP-VK.clipping.clip_volume.depth_clip.*
VK-GL-CTS Issue: 2906
Change-Id: I7a41e62dcbcdcab46ce4f8b04bfe322c688fbcac
Marcin Kańtoch [Fri, 14 Jan 2022 23:49:16 +0000 (00:49 +0100)]
Remove api.tooling_info.validate_instance_layers
Remove:
dEQP-VK.api.tooling_info.validate_instance_layers
Components: Vulkan
VK-GL-CTS issue: 3395
This reverts commit
7628909f404f665eb54c6a5019386747fb631134.
Change-Id: I68de938e73c10fed80d4e9bb3698b513a1b44315
(cherry picked from commit
9f4d02658c354eef36e42edd69a50a3bb34639ec)
Ilkka Saarelainen [Thu, 23 Dec 2021 06:39:55 +0000 (08:39 +0200)]
Add missing feature check
Some of the buffer memory requirement tests were using
vkGetBufferMemoryRequirements2 function and not checking
if the required feature/extension is enabled.
This CL adds the feature check.
Components: Vulkan
Affects:
dEQP-VK.api.buffer_memory_requirements.*.method2.*
VK-GL-CTS Issue: 3301
Change-Id: Ic99ab4d39a03cd3ec035a17a1c27aceeafa1e69a
Mohankumar Nekkarakalaya [Mon, 10 Jan 2022 22:36:17 +0000 (14:36 -0800)]
Fix vkAttachmentRateTests
The VkRenderingFragmentShadingRateAttachmentInfoKHR struct has its
shadingRateAttachmentTexelSize member set to the dimension of FSR
attachment, instead of attachmentTexelSize provided by the test.
A graphics pipeline used to draw FSR attachment, which is then used to
draw another color attachment. But the VkPipelineRenderingCreateInfoKHR
used by this pipeline sets the color format to that of the color
attachment, instead of FSR attachment
Affects:
dEQP-VK.fragment_shading_rate.dynamic_rendering.attachment_rate.*
Components: Vulkan
VK-GL-CTS issue: 3439
Change-Id: I36dad0f7dfa267c702fb611cd3b1b285fe0bb339
Matthew Netsch [Sun, 16 Jan 2022 00:11:00 +0000 (00:11 +0000)]
Merge "Merge vk-gl-cts/dev/VK_KHR_global_priority into vk-gl-cts/vulkan-cts-1.3.1" into vulkan-cts-1.3.1
Matthew Netsch [Sat, 15 Jan 2022 05:53:52 +0000 (05:53 +0000)]
Merge vk-gl-cts/vulkan-cts-1.3.0 into vk-gl-cts/vulkan-cts-1.3.1
Change-Id: I348041254e129d38fd3c434945263f93f1582093
John Anthony [Thu, 6 Jan 2022 23:30:56 +0000 (00:30 +0100)]
Remove repeated struct in writeDeviceFeatures2
Remove VkPhysicalDeviceShaderIntegerDotProductFeaturesKHR from list of
feature structs in writeDeviceFeatures2, as it is an alias for
VkPhysicalDeviceShaderIntegerDotProductFeatures which is also in the
list.
Affects:
dEQP-VK.api.info.get_physical_device_properties2.features
Components: Vulkan
VK-GL-CTS issue: 3437
Change-Id: Ibb0b6b655887c1452f55c730245941afb7dc108b
Piotr Byszewski [Tue, 11 Jan 2022 20:04:56 +0000 (21:04 +0100)]
Update vulkan-docs version
Recent changes to vulkan video include generating video extension
'Std' header files from video.xml and addition of *_INVALID enum
values that have same value as *_MAX_ENUM values.
This change updates vulkan-docs to version 1.2.203 and updates
gen_framework.py script to properly handle changes in vulkan video.
Affects: *
Components: Framework, Vulkan
VK-GL-CTS issue: 3431
Change-Id: Ibdb4bc8ace9572da920fa02649fcab7bc563841d
Matthew Netsch [Sat, 15 Jan 2022 01:39:49 +0000 (20:39 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.8 into vk-gl-cts/vulkan-cts-1.3.0
Change-Id: Ie7b28e84ceb9de28964db02e7744a01ea52b7c50
Ari Suonpaa [Tue, 4 Jan 2022 13:04:12 +0000 (15:04 +0200)]
Remove redundant load/store op none tests
Load/store op none tests had originally a hard coded
depth stencil format, but was later changed to iterate
on multiple formats. The depth tests were accidentally
left there (as a duplicate) outside a format loop, and
the depth format parameter was uninitialized in these
tests.
This change removes these old tests and also fixes
the dynamic rendering tests to use correct depth
stencil formats.
VK-GL-CTS Issue: 3426
Affects:
dEQP-VK.*.suballocation.load_store_op_none.*
Components: Vulkan
Change-Id: I5c1e0a6d95bb1dbc88364f6e99f84e47619c285d
Mohankumar Nekkarakalaya [Tue, 11 Jan 2022 00:27:09 +0000 (16:27 -0800)]
Fix vktFragmentShadingRateBasic tests
Many graphics pipelines are used in dynamic render pass which uses
fragment shading attachment, but these pipelines don't have
VK_PIPELINE_CREATE_RENDERING_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR
flags when they are created. Adding those flags.
Affects: dEQP-VK.fragment_shading_rate.dynamic_rendering.*
Components: Vulkan
VK-GL-CTS issue: 3440
Change-Id: I3dd0aae9d6e9f2fc0bb5266f4f4ba442ebc0317b
Matthew Netsch [Fri, 14 Jan 2022 22:52:07 +0000 (17:52 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.7 into vk-gl-cts/vulkan-cts-1.2.8
Change-Id: Ic1cf8fed8e0713c216ff31212334cb53acbbf72d
Slawomir Cygan [Fri, 10 Dec 2021 10:34:37 +0000 (11:34 +0100)]
Fix getting capture address in RT capture replay tests
Use vkGetBufferOpaqueCaptureAddress to retreive address
used in opaqueCaptureAddress
Components: Vulkan
VK-GL-CTS Issue: 3420
Affects: dEQP-VK.ray_tracing_pipeline.capture_replay.shader_binding_tables
Change-Id: Ifaa2fe92d6517fa75a29ad21c06365efd7857de4
Sławomir Cygan [Mon, 10 Jan 2022 15:16:38 +0000 (16:16 +0100)]
Remove time measurement on deferred host build tests
The time measurement is wrongly implemented in this test
- it measures also thread creation, allocations and VK setup time, additionally
to AS build. It is not easily fixable.
Moreover, the spec says that offloading the work to background threads
is 'desirable', however it never says it is faster.
VK-GL-CTS Issue: 3435
Components: vulkan
Affects:
dEQP-VK.ray_tracing_pipeline.acceleration_structures.*
dEQP-VK.ray_query.acceleration_structures.*
Change-Id: I41d836e2e454b9fb9bb46109edddd4eda19370e9
Matthew Netsch [Fri, 14 Jan 2022 17:36:58 +0000 (17:36 +0000)]
Merge vk-gl-cts/vulkan-cts-1.2.6 into vk-gl-cts/vulkan-cts-1.2.7
Change-Id: I1d7510b4e0626392ff35aa1f38c1bd193b8ce319
Matthew Netsch [Fri, 14 Jan 2022 16:04:35 +0000 (11:04 -0500)]
Merge vk-gl-cts/dev/VK_KHR_global_priority into vk-gl-cts/vulkan-cts-1.3.1
Change-Id: I62eb79b47a281c3d240f5567c1b85c7c42dadea8
Matthew Netsch [Fri, 14 Jan 2022 16:01:23 +0000 (11:01 -0500)]
Merge vk-gl-cts/vulkan-cts-1.3.1 into vk-gl-cts/dev/VK_KHR_global_priority
Change-Id: Icba0010f8d5d655a23414d28f46a6536d0af52ea
Arkadiusz Sarwa [Tue, 7 Dec 2021 17:22:32 +0000 (18:22 +0100)]
Remove api.tooling_info.validate_instance_layers
Remove:
dEQP-VK.api.tooling_info.validate_instance_layers
Components: Vulkan
VK-GL-CTS issue: 3395
This reverts commit
7628909f404f665eb54c6a5019386747fb631134.
Change-Id: I68de938e73c10fed80d4e9bb3698b513a1b44315
Matthew Netsch [Fri, 14 Jan 2022 06:54:19 +0000 (06:54 +0000)]
Merge vk-gl-cts/vulkan-cts-1.2.5 into vk-gl-cts/vulkan-cts-1.2.6
Change-Id: Ic336acbf09ed630cc1b20ea82796f20369b1a5dc
Matthew Netsch [Fri, 14 Jan 2022 05:19:30 +0000 (05:19 +0000)]
Merge vk-gl-cts/vulkan-cts-1.2.4 into vk-gl-cts/vulkan-cts-1.2.5
Change-Id: I7ec0667baf95d997230a8befced3ca4f2cda4876
Mohankumar Nekkarakalaya [Wed, 12 Jan 2022 21:23:25 +0000 (13:23 -0800)]
Fix sType Tooling Info tests
Tooling Info tests were not setting the sType correctly. This goes
against spec
where "sType must be
VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_TOOL_PROPERTIES_EXT". These
tests also check this sType to validate functionality.
Components: Vulkan
Affects:
dEQP-VK.api.tooling_info.*
VK-GL-CTS issue: 3444
Change-Id: Ic72104261a577d7d767742d4b2828296eba3922c
Paul Thomson [Fri, 3 Dec 2021 16:48:36 +0000 (16:48 +0000)]
DeqpTestRunner: fix deqpLogFilename
Fix capitalization of shell argument "deqpLogFilename" in
DeqpTestRunner.java. The code still worked fine in most cases because
the default filename matches the filename passed in DeqpTestRunner.java.
Components: Android
Google bug: b/
206657494
Change-Id: I857fa3994ada72aa96d199569704a46034255309
(cherry picked from commit
42017ff7072dcc7e7a7d51dd5611be05abf5460f)
Mikolaj Chadzynski [Thu, 23 Dec 2021 08:38:54 +0000 (09:38 +0100)]
Add format check to SharedPresentableImageTest
The SharedPresentableImageTest does not follow Vulkan spec.
The SurfaceFormats got by getPhysicalDeviceSurfaceFormats ->
getPhysicalDeviceSurfaceFormatsKHR should be checked by
vkGetPhysicalDeviceImageFormatProperties. This is according to:
www.khronos.org/registry/vulkan/specs/1.2-extensions/html/chap33.html
"33.5. Surface Queries
In addition to the surface capabilities as obtained by surface queries
below, swapchain images are also subject to ordinary image creation
limits as reported by vkGetPhysicalDeviceImageFormatProperties. As an
application is instructed by the appropriate Valid Usage sections, both
the surface capabilities and the image creation limits have to be
satisfied whenever swapchain images are created."
Unsupported format can lead to non-deterministic behavior e.g.
a segmentation fault, a null pointer dereference in a test or a driver.
VK-GL-CTS issue: 3422
Affects:
dEQP-VK.wsi.android.shared_presentable_image.*
Components: Vulkan
Change-Id: Id4bb4d1c81e090ed1d7f34a76f3cfafc464d8cf8
Matthew Netsch [Thu, 13 Jan 2022 21:38:03 +0000 (16:38 -0500)]
Fix inl files
Change-Id: I6468dff8d75e73dbd23a0a1b1b1314ea80ef954b
Components: Vulkan, Framework
Charles Johnston [Thu, 13 Jan 2022 17:05:37 +0000 (12:05 -0500)]
Add VK_KHR_global_priority to extensions_data.txt
dEQP-VK.info.device_extensions fails without this.
Affected test:
dEQP-VK.info.device_extensions
Components: Vulkan
VK-GL-CTS issue: 3446
Change-Id: I4a0924754f085eccabe1dd08d0020621773cddb6
Matthew Netsch [Mon, 10 Jan 2022 20:36:43 +0000 (15:36 -0500)]
Merge vk-gl-cts/dev/VK_KHR_roadmap_2022 into vk-gl-cts/vulkan-cts-1.3.1
Change-Id: I564944f8a1fe42a969063a40f7ecf689549bab59
Matthew Netsch [Mon, 10 Jan 2022 16:42:51 +0000 (11:42 -0500)]
Merge vk-gl-cts/vulkan-cts-1.3.1 into vk-gl-cts/dev/VK_KHR_roadmap_2022
Change-Id: Iff63540ee97f97d9e860d655439f0f85ca5ee00d
Matthew Netsch [Sun, 9 Jan 2022 20:33:32 +0000 (15:33 -0500)]
Merge vk-gl-cts/vulkan-cts-1.3.0 into vk-gl-cts/vulkan-cts-1.3.1
Change-Id: Iab3bf6dc70b7f8b1f29556a1394b2821f718ca0c
Marcin Kańtoch [Sun, 12 Dec 2021 22:39:11 +0000 (23:39 +0100)]
Fix for issues in dynamic rendering tests
Missing barrier before begin rendering to transition image from
VK_IMAGE_LAYOUT_UNDEFINED to VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL
Components: Vulkan
VK-GL-CTS issue: 3383
Affects:
dEQP-VK.dynamic_rendering.suballocation.sparserendertarget*
Change-Id: Ied286e31282d56e8221e327e3d02a5d9333cf499
Matthew Netsch [Sun, 9 Jan 2022 15:39:46 +0000 (10:39 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.8 into vk-gl-cts/vulkan-cts-1.3.0
Change-Id: Iba40a0634a1de5fde930a2f469b5c9bc31d8c4d9
Jari Komppa [Wed, 1 Dec 2021 15:00:14 +0000 (17:00 +0200)]
Fix stencil layout transitions in samplemask tests
This change fixes the validation layer errors for the _samplemask cases.
affects:
dEQP-VK.renderpass2.depth_stencil_resolve.*_samplemask
Components: Vulkan
VK-GL-CTS issue: 3362
Change-Id: I0e1d9a44c3ed127fbde3765725243fae722ad938
Vidar Lilleboe [Tue, 30 Nov 2021 13:31:36 +0000 (14:31 +0100)]
Fix RGBA10x6 feature check
Verify that the extension is available before quering for support.
Affects:
dEQP-VK.api.info.format_properties.r10x6g10x6b10x6a10x6_unorm_4pack16
Components: Vulkan
VK-GL-CTS issue: 3370
Change-Id: Ib8cbbbe1f8c36b5022de1c04e623d49f5fb2b4c4
Graeme Leese [Tue, 4 Jan 2022 14:20:13 +0000 (14:20 +0000)]
Rename some waived tests for dynamic rendering
These tests were renamed in commit 90835b7 "Rename dynamic_rendering
tests", but the waivers file was not updated. (The Android waiver file
was updated, so is not changed here).
Component: Vulkan
VK-GL-CTS issue: 757
Change-Id: I0beae9cd0e6b4e33e8c8f717b0eae44797104844
Sławomir Cygan [Thu, 9 Dec 2021 15:50:53 +0000 (16:50 +0100)]
Fix barrier for initializing resolve attachment image to use proper level
This changes the level in the barrier to match level used by image view
used as resolve attachment in renderpass.
VK-GL-CTS Issue: 3407
Components: Vulkan
Change-Id: I500dfdbf15c4b7cd9943d3b063122107e1890688
Affects: dEQP-VK.dynamic_rendering.*.multisample_resolve.*_resolve_level_*
Matthew Netsch [Fri, 7 Jan 2022 19:26:26 +0000 (14:26 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.7 into vk-gl-cts/vulkan-cts-1.2.8
Change-Id: Ib63fd21efc3a2a3e4896a212d51e3ab1f12e56d4
Piotr Byszewski [Mon, 13 Dec 2021 14:08:09 +0000 (15:08 +0100)]
Checked .inl files back into the repo
By default .inl files won't be generated at build time but
this functionality is still present and to activate it
value of DEQP_VULKAN_INL_GEN_OUTPUTS_DIR should be changed
to point to PROJECT_BINARY_DIR.
VK-GL-CTS issue: 3197
Components: Framework, Vulkan
Affects:
dEQP-VK.*
Change-Id: I6ba5932aa51740048c8dcc0c0222e8f7553ac4b3
Piotr Byszewski [Fri, 10 Dec 2021 12:32:27 +0000 (13:32 +0100)]
Pass force to fetch_sources
Switching vulkan-docs folders between gitlab and github branches
results in errors on the server (clobbering the tags). Using
fetch sources with --force param resolves the issue.
Components: Vulkan
VK-GL-CTS issue: 3197
Change-Id: I913d5803836e9f7a59494e5ebf6e6261ede52948
Ricardo Garcia [Thu, 11 Nov 2021 17:18:38 +0000 (18:18 +0100)]
Fix strided device address regions in RT misc tests
Some strided device address regions in ray tracing misc tests were being
created with the wrong size, not taking into account some tests were
storing several shader group handles in the binding tables.
In addition, this commit also fixes several validation errors in these
tests, related to bad sizes when flusing allocations and unaligned
strides in strided device address regions, which needed to be rounded
up.
Affected tests:
dEQP-VK.ray_tracing_pipeline.misc.*
Components: Vulkan
VK-GL-CTS issue: 3280
Change-Id: I7d20c347ff44b455547115d1a6b94c5d69a46c2c
Ricardo Garcia [Tue, 9 Nov 2021 16:26:37 +0000 (17:26 +0100)]
Fix ray tracing closedFan2 tests
The watertightness tests for ray tracing include a closedFan2 variant
that had several issues.
These tests create a circle made of a variable number of triangles, all
of them sharing a central vertex and all of them sharing two edges with
neighboring triangles.
With that composition, closedFan2 variants created one geometry, BLAS
and instance per triangle, and tried to verify certain rules regarding
closed fans and watertightness. This had several problems:
- By having each triangle belong to a different instance, the set up
does not meet the requirements for watertight geometry as laid out in
the spec.
- Ray tracing shaders were increasing atomic counters, indexing them per
ray and primitive id, in the any-hit shader. If a counter was
increased more than once, this was considered a failure. However, in
the closedFan2 variants all triangles have primitive id zero due to
all of them belonging to different geometries. If a ray was found to
hit two geometries/BLAS, it would result in a failure because the same
counter would be increased twice, but that result is legal according
to the spec.
This commit fixes closedFan2 tests by addressing both issues:
- The tests now create one geometry per triangle, but groups all
geometries in a single BLAS and instance, meeting the spec
requirements regarding closed fans.
- When increasing atomic counters, they are indexed per ray and per
geometry index, so it is illegal to hit the same geometry twice with
the same ray, following the rules of
VK_GEOMETRY_NO_DUPLICATE_ANY_HIT_INVOCATION_BIT_KHR, but they allow
the same ray to hit two triangles (geometries) as the spec allows.
In addition, it also removes some dead code and fixes angle calculation
so they fall in the [-pi, pi] range.
Affected tests:
dEQP-VK.ray_tracing_pipeline.watertightness.*
Components: Vulkan
VK-GL-CTS issue: 3150
Change-Id: I430be3a1830592d37b75031b8506a194c862a0d7
Jörg Wagner [Mon, 6 Dec 2021 08:57:51 +0000 (09:57 +0100)]
Reduce framebuffer size of dEQP-VK.graphicsfuzz.spv-stable-pillars-volatile-nontemporal-store
Reduce the size to 32x16 to avoid avoid timeouts on low-end platforms.
This shouldn't affect the ability to find compiler bugs because the
shader itself is the same.
Affects: dEQP-VK.graphicsfuzz.spv-stable-pillars-volatile-nontemporal-store
Components: Vulkan
VK-GL-CTS Issue: 3411
Change-Id: If4fac83d04723ab16e987a2f7d1495bf1a8f055f
Ilkka Saarelainen [Fri, 17 Dec 2021 05:36:16 +0000 (07:36 +0200)]
Fix validation errors in renderpass tests
This CL fixes the validation errors in some of the renderpass
tests. The tests incorrectly defined subpass dependency access
scopes for depth/stencil attachments in some cases.
Affects:
dEQP-VK.renderpass*.attachment_allocation.*
Components: Vulkan
VK-GL-CTS Issue: 3385
Change-Id: Ia9cc78bd28dde5b9cdbf4e28ba759e3bde44a9d0
Shih-Hsin Li [Wed, 24 Nov 2021 00:32:38 +0000 (16:32 -0800)]
Pick correct memoryTypeIndex for AHB
Pick the right memoryTypeIndex for protected allocations so that
protected memory is allocated when createFlag has protected bit
set. This fixed some bindImageMemory failure caused by binding
non-protected memory in testAndroidHardwareBufferImageFormat.
Affects:
dEQP-VK.api.external.memory.android_hardware_buffer.image_formats.*
Components: Vulkan
Change-Id: Ib50a97d248930b6cc6538d1c7b84e84cddfde40e
Iago Toral Quiroga [Mon, 22 Nov 2021 07:29:50 +0000 (08:29 +0100)]
Allow rounding error when reading back Z buffer
The early fragment test produces Z values <= 0.5 and uses a shader
to write 0.75 that it expects to be ignored due to early fragment
tests, which it verifies by reading back the Z buffer and testing
that all values are <= 0.5.
On our platform, we observe that on storing 0.5 we retrieve
0.500008, which makes us fail the test incorrectly. Fix this
by adding a small room for rounding error, like we do for
other verification paths in these tests.
While we are doing this, lower the tolerance admited for
the late fragment test case as well.
Components: Vulkan
VK-GL-CTS Issue: 3340
Affects:
dEQP-VK.fragment_operations.early_fragment.discard_early_fragment_tests_depth
dEQP-VK.fragment_operations.early_fragment.discard_no_early_fragment_tests_depth
Change-Id: I8e1782b81d0e74a4a5af3e3cac40c9679f543ac6
Jari Komppa [Mon, 15 Nov 2021 08:25:36 +0000 (10:25 +0200)]
Fix amber vs cts device feature requirements
This change unifies the device requirements between cts and amber for
the affected tests.
Affects:
dEQP-VK.glsl.builtin.precision_fp16_storage16b.*
Components: Vulkan
VK-GL-CTS issue: 3304
Change-Id: I93f840751b40d145f89f847612e36733a18ac971
Piotr Byszewski [Mon, 22 Nov 2021 14:38:35 +0000 (15:38 +0100)]
Fix extended_dynamic_state tests
On vulkan-cts-1.2.8 branch extended_dynamic_state tests were
extended compared to the same group but in vulkan-cts-1.2.6 branch
(new tests were added). After updates to vulkan-cts-1.2.6 were
merged back to vulkan-cts-1.2.8 some of those new tests started
to fail as they did not have required changes.
This change makes sure that triangle strips are used in
the new tests to.
Components: Vulkan
VK-GL-CTS issue: 3327
Affects:
dEQP-VK.pipeline.extended_dynamic_state.*
Change-Id: I4fc19e40f6938d39be4428e8d9d98db4a74c0a5d
Matthew Netsch [Fri, 7 Jan 2022 17:55:19 +0000 (12:55 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.6 into vk-gl-cts-1.2.7
Change-Id: I05420f73334f6aee2729ea2e8f76a079de896617
Piotr Byszewski [Wed, 8 Dec 2021 16:07:35 +0000 (17:07 +0100)]
Update kc-cts version
Version of kc-cts was updated to include fix for inl dependency.
Components: OpenGL
VK-GL-CTS issue: 3400
Change-Id: Ic28275604849506de4139c0bbda20278a2431ca1
Mohankumar Nekkarakalaya [Tue, 9 Nov 2021 17:56:08 +0000 (09:56 -0800)]
Create command pool with command buffer reset in RT tests
-When command pool was created either command buffer reset
bit should have been set or command buffer should have
reset pool before using for VU.
-Fix is to create command pool with reset bit set.
Components: Vulkan
VK-GL-CTS Issue: 3288
Affected tests: dEQP-VK.ray_tracing_pipeline.acceleration_structures.device_compability_khr.*
Change-Id: Ie21926cd53c505e46da0d03a6082e689d45d5d2a
Mika Väinölä [Tue, 30 Nov 2021 11:13:52 +0000 (13:13 +0200)]
Suppress GCC 11 conversion warning
On GCC 11 with UBSan enabled deHalfIsIEEENaN produces warnings due to
right shift promoting the result of an expression to an int, which is
then assigned to a deUint16.
Components: Framework
VK-GL-CTS issue: 3371
Change-Id: I48526b61ead69ee14b3253fa29737499253e62bc
Arkadiusz Sarwa [Wed, 17 Nov 2021 15:43:24 +0000 (16:43 +0100)]
Fix allocation of system memory.
Allocation of system memory which have been used as reference data can fail.
VK-GL-CTS issue: 3319
Components: Vulkan
Affects:
dEQP-VK.reconvergence.*
Change-Id: Icf9e6a2ad15912109aee2b6ea693a17650579087
Piotr Byszewski [Wed, 13 Oct 2021 12:17:14 +0000 (14:17 +0200)]
Generate inl files at build time
Inl files are no longer checked into the repo instead they are
generation at build time.
VK-GL-CTS issue: 3197
Components: Framework, Vulkan
Affects:
dEQP-VK.*
Change-Id: I526ed3d8dc8cc54860e44937a5048e499248a3c6
Piotr Byszewski [Tue, 19 Oct 2021 09:19:58 +0000 (11:19 +0200)]
Add Vulkan-Docs to fetch sources
Header files that are used to generate inl files are no longer
checked into the repo. Headers are now generated in Vulkan-Docs
which are now fetched from the gitlab. Generation is done
by gen_framework.py.
VK-GL-CTS issue: 3197
Components: Framework, Vulkan
Affects:
dEQP-VK.*
Change-Id: I4291848910b03180d4dc5514f8d8e5943c36e9b2
Paul Thomson [Mon, 20 Dec 2021 12:39:21 +0000 (12:39 +0000)]
Mirror ANGLE Khronos waiver for Android
Components: Android
VK-GL-CTS issue: 3255
Excluded:
dEQP-GLES3.functional.transform_feedback.array_element.*
dEQP-GLES3.functional.transform_feedback.random.*
dEQP-GLES31.functional.program_interface_query.transform_feedback_varying.*_array_element
dEQP-GLES31.functional.program_interface_query.transform_feedback_varying.type.*.array.*
Change-Id: I670c1e71d60dced06229520bca6244e87fa4ea1a
James Fitzpatrick [Wed, 8 Dec 2021 12:17:29 +0000 (12:17 +0000)]
Fix requirements tests for multiplane images
The memory requirements tests for multiplane images would previously
assume that bits were not sparsely set in memoryTypeBits.
This could lead to the tests assuming that an implementation was
returning a lazily allocated memory type for an image without
transient attachment set.
Affects: dEQP-VK.memory.requirements.*multiplane_image*
Components: Vulkan
VK-GL-CTS issue: 3405
Change-Id: Ic1e56d7412ac413da907059c79b3f7064b3c664b
Jörg Wagner [Mon, 6 Dec 2021 08:57:51 +0000 (09:57 +0100)]
Reduce framebuffer size of spv-stable-pillars-O-op-select-to-op-phi
Reduce the size to 32x16 to avoid avoid timeouts on low-end platforms.
This shouldn't affect the ability to find compiler bugs because the
shader itself is the same.
Affects: dEQP-VK.graphicsfuzz.spv-stable-pillars-O-op-select-to-op-phi
Components: Vulkan
VK-GL-CTS Issue: 3367
Change-Id: I2eacbc75df29b8dc44c8744bc13e140d6ef7c0cb
Matthew Netsch [Fri, 7 Jan 2022 16:02:38 +0000 (11:02 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.5 into vk-gl-cts/vulkan-cts-1.2.6
Change-Id: I8e4fb16c3f82b6cc42af849e201d50ad2f053d6e
Ricardo Garcia [Thu, 9 Dec 2021 14:23:57 +0000 (15:23 +0100)]
Additional warning fix for Clang 13
Fixes warning about unused variable. No test results should be affected
by this change.
Components: Vulkan
VK-GL-CTS issue: 3147
Change-Id: Ib7c0425891e33e65e22ed90668aa3d0d7eae85df
Ricardo Garcia [Tue, 14 Dec 2021 10:08:16 +0000 (11:08 +0100)]
Fix mismatched ray payload in descriptor set random tests
Miss shaders had a ray payload declaration that didn't match other
shading stages.
Affected tests:
dEQP-VK.binding_model.descriptorset_random.*.miss.*
Components: Vulkan
VK-GL-CTS issue: 3412
Change-Id: I4473a883248bc9d572e6112da82bc4c774689071
s.fricke [Fri, 12 Nov 2021 21:54:10 +0000 (13:54 -0800)]
Add Samsung Driver ID
The enum value was added in the 1.2.199 Vulkan Headers
VK-GL-CTS issue: 3384
Components: Vulkan
Affects:
dEQP-VK.api.driver_properties.driver_id_match
Change-Id: Id04c20b5fe8ad90350a588fd0e7de0c498ebe5b6
Paul Thomson [Fri, 3 Dec 2021 17:53:24 +0000 (17:53 +0000)]
Update Android test lists for Broadcom waiver
VK-GL-CTS issue: 2804
Components: Vulkan, Android
Google bug: b/
206833783
Change-Id: I51fcc3ce1617dc5a980e893bfc5915e8fc789c74
Brandon Schade [Tue, 28 Sep 2021 19:28:20 +0000 (12:28 -0700)]
Remove few EGL robustness tests
Components: EGL
Affects:
dEQP-EGL.functional.robustness.reset_context.shaders.infinite_loop.*
VK-GL-CTS issue: 257
Change-Id: I9edb2e577fb14b98d83bb16dc31188d3a901606d
(cherry picked from commit
39c99a7ece4b6618cde30c6c621bd3036801bd4b)
Mohd Faisal [Mon, 22 Nov 2021 14:58:37 +0000 (14:58 +0000)]
Fix use a device with protected memory enabled
Test is trying to allocate memory from protected memory heap using
default device which doesn't have protected memory enabled. Change
checks if the protected memory supported, if it is create a custom
device with protected memory enabled.
Affects:
dEQP-VK.memory.mapping.*.full.variable.implicit_unmap
Components: Vulkan
VK-GL-CTS issue: 3292
Change-Id: I74897e3dd7f1cada0044036ba27ad8764754ed23
YiHsing Shen [Tue, 9 Nov 2021 02:03:40 +0000 (02:03 +0000)]
Throttling CTS producing frame speed
CTS checks the present time of the frame 6 frames ago. However, if
the default buffer count of BufferQueue is more than 7, CTS could
produce frames continuously in a short time. In this case, the frame
6 frames ago might be not presented yet then CTS fails. To prevent
this situation, CTS produces frames at the speed according to
compositeInterval.
Component: EGL
Affected tests:
dEQP-EGL.functional.get_frame_timestamps.*
Change-Id: I1ac15974a6c4147ee2546ad21dea1fb3e6bf38f9
Matthew Netsch [Fri, 7 Jan 2022 06:07:01 +0000 (01:07 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.4 into vk-gl-cts/vulkan-cts-1.2.5
Change-Id: I85eab03afdf24359556917617b56856b51b7eb07
Matthew Netsch [Thu, 6 Jan 2022 22:45:47 +0000 (17:45 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.3 into vk-gl-cts/vulkan-cts-1.2.4
Change-Id: Id711f3ba5558c490c3629051677c7f41ec2da2d6
Ricardo Garcia [Fri, 10 Dec 2021 13:54:01 +0000 (14:54 +0100)]
Fix warnings reported by clang 13
This commit fixes code that was producing warnings when built using
clang 13. They are mostly about unused variables and null pointer
substractions, but the new code should be semantically the same.
No test results should be affected by these changes.
Components: Framework, Vulkan, OpenGL
VK-GL-CTS issue: 3147
Change-Id: I0eb87c17270a610c8b29ec27ae8e10009053f8e1
Jari Komppa [Fri, 19 Nov 2021 13:16:54 +0000 (15:16 +0200)]
Rename various things for more inclusive language
This change renames various things to avoid gender-specific or degatory
terms.
Khronos inclusive language policy:
https://www.khronos.org/about/inclusive-language
Majority of the changes are due to the term 'dummy', as in mannequin or
placeholder, which in programming may mean any of empty, placeholder,
unused, minimal, busywork, ignored or irrelevant.
Changes not included are file names (gluDummyRenderContext), test names
(dummy_instruction_set) or branch names (master).
Affects:
*
Components: Framework, Vulkan, OpenGL
VK-GL-CTS issue: 2509
Change-Id: I3837477a1b3de1142e8d97c503890ccbce9138f8
Ari Suonpaa [Tue, 14 Dec 2021 05:27:53 +0000 (07:27 +0200)]
Remove vkDestroyBuffer
A buffer allocation test that is supposed to fail a large
allocation still tried to destroy the buffer even when an
error was returned from the allocation. This is now removed.
VK-GL-CTS Issue: 3192
Affects:
dEQP-VK.api.buffer.basic.size_max_uint64
Components: Vulkan
Change-Id: Ic36cb548ab2796b41e2a0b44d023e644b02a6d8c
Jari Komppa [Tue, 23 Nov 2021 10:53:00 +0000 (12:53 +0200)]
Avoid querying non-supported hardware features
Change the feature query test to avoid querying information on hardware
features that are not supported. This is done by querying non-existing
feature (max_enum) instead, which must be ignored by implementations.
The change also adds comment to all generated files stating what script
generates the files.
Affects:
dEQP-VK.api.info.get_physical_device_properties2.features
Components: Vulkan
VK-GL-CTS issue: 2853
Change-Id: I24a3832abc0721e649edbb112bd7f776c2b5d7f4
Mika Väinölä [Mon, 13 Dec 2021 11:00:05 +0000 (13:00 +0200)]
Disable two warnings for old Amber versions
Older versions of Amber fail to build with Clang >= 11 and GCC >=11 due
-Werror and warnings that have been fixed in later versions. Upgrading
Amber in older CTS branches risks accidental downgrades during fix
propagation. This change disables -Wsuggest-destructor-override for
Clang and -Wuninitialized for GCC when building libamber. These
should be re-enabled in newer Vulkan CTS releases.
Components: Framework, Vulkan
VK-GL-CTS issue: 3361
Change-Id: Ifc2ed69584d8ad179042b80212e02ceb9956d110
Mika Väinölä [Wed, 1 Dec 2021 10:24:52 +0000 (12:24 +0200)]
Zero initialize array in internal tests
This suppresses a -Wmaybe-uninitialized warning in GCC 11 release
builds.
Affects: dE-IT.delibs.decpp.block_buffer
Components: Framework
VK-GL-CTS issue: 3378
Change-Id: I2315b5cdeecb6e9a54dd419c88134f30a3335029
Matthew Netsch [Sat, 11 Dec 2021 16:35:55 +0000 (11:35 -0500)]
Add 1.3.1.0 conformance version
Change-Id: I584405ca88368f1a873b3d889d9ce3317c7dbc05
Components: Vulkan
Affects: dEQP-VK.api.driver_properties.conformance_version
Matthew Netsch [Sat, 11 Dec 2021 16:34:18 +0000 (11:34 -0500)]
Merge vk-gl-cts/master into vk-gl-cts/vulkan-cts-1.3.1
Change-Id: I851afbc7c49096c4a2e088335bf504eddea773ad
Antto Mäkinen [Fri, 26 Nov 2021 15:12:06 +0000 (17:12 +0200)]
Add a batch of GraphicsFuzz coverage tests
This commit adds a batch of GraphicsFuzz coverage tests.
Components: Vulkan
New Tests:
dEQP-VK.graphicsfuzz.cov-do-while-negative-iterator-nested-loops-increment-array-element
dEQP-VK.graphicsfuzz.cov-fragcoord-conditions-never-return-index-array-using-uniform
dEQP-VK.graphicsfuzz.cov-function-loop-condition-uniform-shift-right
dEQP-VK.graphicsfuzz.cov-function-nested-loops-break-early-never-discard
dEQP-VK.graphicsfuzz.cov-function-two-loops-limit-using-arguments-array-element-copies
dEQP-VK.graphicsfuzz.cov-global-loop-counter-set-array-element-once-index-using-findmsb
dEQP-VK.graphicsfuzz.cov-integer-minus-one-increased-before-indexing-array
dEQP-VK.graphicsfuzz.cov-loop-array-element-copy-index-clamp-sign
dEQP-VK.graphicsfuzz.cov-loop-start-from-one-switch-case-never-executed
dEQP-VK.graphicsfuzz.cov-loop-two-iterators-increment-array-empty-do-while
dEQP-VK.graphicsfuzz.cov-nested-functions-compare-fragcood-length-zero-vector
dEQP-VK.graphicsfuzz.cov-nested-loops-decrease-vector-component-by-matrix-element-global-loop-counter
dEQP-VK.graphicsfuzz.cov-nested-loops-global-counter-func-set-struct-field
dEQP-VK.graphicsfuzz.cov-repeating-conditions-fract-unused
Change-Id: I6e6377a60a134b59d3afd40015d282821b429a2a
Ricardo Garcia [Tue, 30 Nov 2021 18:30:04 +0000 (19:30 +0100)]
Fix dot product with saturation tests
This commit fixes an issue that prevented some valid results from being
verified in a variety of cases, and fixes the in-software dot-product
calculation so it will not rely on undefined truncation of signed
integers.
Also, it adjusts the pseudorandom numeric range in some tests to more
easily test cases of saturating and non-saturating operations.
Finally, the unsigned dot product operations have been separated in
saturating and non-saturating cases to more easily check both
conditions.
Affected and new tests:
dEQP-VK.spirv_assembly.instruction.compute.opudot*
dEQP-VK.spirv_assembly.instruction.compute.opsdot*
dEQP-VK.spirv_assembly.instruction.compute.opsudot*
Components: Vulkan
VK-GL-CTS issue: 3366
Change-Id: If058fd13705290472eef369167506a35cf7bba91
Piotr Byszewski [Tue, 9 Nov 2021 13:43:40 +0000 (14:43 +0100)]
Add dynamic rendering to attachment rate tests
Affects:
dEQP-VK.fragment_shading_rate.*.attachment_rate.*
Components: Vulkan
VK-GL-CTS issue: 3283
Change-Id: Id2cf3d17c076c58b13f84b9ecf9b238f4989dcb3
Ricardo Garcia [Thu, 4 Nov 2021 15:58:22 +0000 (16:58 +0100)]
Further VK_NV_mesh_shader test variants and fixes
* Add local_size/vertices/primitives maximization cases.
* Add task, mesh and fragment interface variable tests.
* Increase glslang NV mesh shader built-in limits (they need to be as
big as exposed by other interesting implementations like RADV and used
in some tests).
* Replace tcu::nothing<T> with tcu::Nothing in misc tests.
New and affected tests:
dEQP-VK.mesh_shader.nv.*
Components: Vulkan
VK-GL-CTS issue: 2991
Change-Id: I5eead8177b6315a44bb95c820af4549028ba5572
Piers Daniell [Thu, 28 Oct 2021 21:48:19 +0000 (15:48 -0600)]
Fix and enable dynamic rendering multivew coverage
Coverage for dynamic rendering multi-draw multiview was
disabled in CL 8340 because it was broken, and also disabled
in vulkan-cts-1.3.0.
This CL reenables the coverage and fixes a couple of bugs
to make it work.
New tests:
dEQP-VK.draw.dynamic_rendering.multi_draw.*.multiview.*
Affects:
dEQP-VK.draw.dynamic_rendering.multi_draw.*
Components: Vulkan
VK-GL-CTS issue: 3258
Change-Id: Iacdc11ca0d8bbc5d0b706236ae31ad8afe30bb46
Matthew Netsch [Sat, 11 Dec 2021 08:28:22 +0000 (08:28 +0000)]
Merge "Merge dev/VK_EXT_depth_clip_control into master"
Ari Suonpaa [Fri, 26 Nov 2021 09:00:58 +0000 (11:00 +0200)]
Fix integer overflow in Random::getInt()
Random integer generation was having a signed integer overflow
when calculating a range between min and max values.
When casting an overflowed value to unsigned int the result
by most (if not all) implementations would produce expected
results due to modulo wraparound. However, this is not guaranteed
to happen as signed integer overflow is regarded as undefined
behavior.
This change casts the min and max values to unsigned int which
has defined under- and overflow behavior.
VK-GL-CTS Issue: 3353
VK-GL-CTS Issue: 3355
VK-GL-CTS Issue: 3356
Affects: *
Components: Framework, Vulkan, OpenGL
Change-Id: I8dff7bf9517433e1699acfe1f6973ea8fb25e4f7
Juha Heiskanen [Mon, 22 Nov 2021 13:15:31 +0000 (15:15 +0200)]
TRANSIENT_ATTACHMENT_BIT store/load op test
Series of tests covering the load and store operations when
VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is enabled. Color, depth and
stencil values are tested separately.
Components: Vulkan
VK-GL-CTS Issue: 3204
New Tests: dEQP-VK.fragment_operations.transient*
Change-Id: I499ff68d243b2fc76660545d12e9b0c64a9d9906
Matthew Netsch [Sat, 11 Dec 2021 07:10:20 +0000 (07:10 +0000)]
Merge vk-gl-cts/vulkan-cts-1.2.8 into vk-gl-cts/master
Change-Id: Idd1ae81cc934e52485f2a79745c9ffa46951390a
Matthew Netsch [Sat, 11 Dec 2021 07:06:29 +0000 (02:06 -0500)]
Merge vk-gl-cts/vulkan-cts-1.2.8 into vk-gl-cts/vulkan-cts-1.3.0
Change-Id: I32b11fd44818f63af4a32bb98a074f36ca0800fd
Shih-Hsin Li [Wed, 24 Nov 2021 00:32:38 +0000 (16:32 -0800)]
Pick correct memoryTypeIndex for AHB
Pick the right memoryTypeIndex for protected allocations so that
protected memory is allocated when createFlag has protected bit
set. This fixed some bindImageMemory failure caused by binding
non-protected memory in testAndroidHardwareBufferImageFormat.
Affects:
dEQP-VK.api.external.memory.android_hardware_buffer.image_formats.*
Components: Vulkan
Change-Id: Ib50a97d248930b6cc6538d1c7b84e84cddfde40e