Bryan Brattlof [Fri, 4 Nov 2022 00:13:57 +0000 (19:13 -0500)]
board: ti: introduce the basic files needed to support the am62a
Introduce the bare minimum SD and UART support for the am62a sk.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Bryan Brattlof [Fri, 4 Nov 2022 00:13:56 +0000 (19:13 -0500)]
arm: mach-k3: am62a: introduce auto-generated SoC data
Introduce the auto-generated clock tree and power domain data needed to
attach the am62a into the power-domain and clock frameworks of uboot
Signed-off-by: Bryan Brattlof <bb@ti.com>
Bryan Brattlof [Fri, 4 Nov 2022 00:13:55 +0000 (19:13 -0500)]
arm: mach-k3: introduce basic files to support the am62a
Introduce the mach-k3 files needed to properly boot TI's am62a SoC
family of devices
Signed-off-by: Bryan Brattlof <bb@ti.com>
Bryan Brattlof [Fri, 4 Nov 2022 00:13:54 +0000 (19:13 -0500)]
soc: ti: k3-socinfo: add am62a SoC entry
Add identification support for TI's am62ax family of SoCs
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Bryan Brattlof [Fri, 4 Nov 2022 00:13:53 +0000 (19:13 -0500)]
ram: k3-ddrss: add am62a controller support
TI's am62a family of SoCs uses a new 32bit DDR controller that shares
much of the same functionality with the existing am64 and j721e
controllers.
Select this controller by default when u-boot is build for the am62a
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Bryan Brattlof [Fri, 4 Nov 2022 00:13:52 +0000 (19:13 -0500)]
arm: dts: introduce am62a7 u-boot dtbs
Introduce the base dts files needed for u-boot or to augment the
linux dtbs for use in the u-boot-spl and u-boot binaries
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Bryan Brattlof [Fri, 4 Nov 2022 00:13:51 +0000 (19:13 -0500)]
arm: dts: introduce am62a7 dtbs from linux kernel
Introduce the basic am62a7 SoC dtbs from the v6.1-rc3 tag of the linux
kernel along with the new am62a specific pinmux definition that we will
use to generate the dtbs for the u-boot-spl and u-boot binaries
Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Bryan Brattlof [Mon, 24 Oct 2022 21:53:28 +0000 (16:53 -0500)]
ram: k3-ddrss: add auto-generated macros for am62a support
The new 32bit DDR controller for TI's am62a family of SoCs shares much
of the same functionality with the existing 16bit (am64) and 32bit
(j721e) controllers, so this patch reorganizes the existing
auto-generated macros for the 16bit and 32bit controllers to make room
for the macros for the am62a's controller
This patch consists mostly of header/macro renames and additions with a
new Kconfig option (K3_AM62A_DDRSS) allowing us to select these new
macros during compilation.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Sean Anderson [Tue, 22 Nov 2022 17:54:52 +0000 (12:54 -0500)]
rtc: Add fallbacks for dm functions
This adds fallbacks for the various dm_rtc_* functions. This allows
common code to use these functions without ifdefs.
Fixes:
c8ce7ba87d1 ("misc: Add support for nvmem cells")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Tue, 22 Nov 2022 17:54:51 +0000 (12:54 -0500)]
x86: fsp: Only compile fsp_save_s3_stack if (SPL_)DM_RTC is enabled
This function calls rtc_write32, which has a different signature
depending on if (SPL_)DM_RTC is enabled or not. This could result in a
mismatch in SPL if DM_RTC was enabled but SPL_DM_RTC, as the non-DM
declaration would still be used in SPL even though the implementation
would be for non-DM_RTC. We are switching to the correct definitions in
the next commit, so this will become a compilation error. Since
fsp_save_s3_stack is not called from SPL, avoid compiling it if
(SPL_)DM_RTC is disabled.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Pali Rohár [Wed, 23 Nov 2022 23:45:00 +0000 (00:45 +0100)]
Nokia RX-51: Use ENTRY/ENDPROC for save_boot_params
ENTRY/ENDPROC macros from linux/linkage.h will make code more readable and
also will properly mark assembly symbol in ELF binary as function symbol.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tom Rini [Thu, 8 Dec 2022 20:12:14 +0000 (15:12 -0500)]
Merge branch '2022-12-08-assorted-tooling-and-fs-fixes' into next
- Assorted fixes for squashfs, ext4, a number of host tools (including
reworking u-boot-initial-env) and then a few unrelated code cleanups /
fixes.
Pali Rohár [Sun, 4 Dec 2022 12:31:08 +0000 (13:31 +0100)]
ata: ahci-pci: Replace magic constant by macro
Replace 0x1b21 by macro PCI_VENDOR_ID_ASMEDIA with the same value.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Kasper Revsbech [Thu, 1 Dec 2022 15:30:32 +0000 (16:30 +0100)]
fs/squashfs: use lldiv function for math
When compling for x86:
u-boot/fs/squashfs/sqfs.c:90: undefined reference to `__udivmoddi4'
Signed-off-by: Kasper Revsbech <kasper.revsbech.ext@siemensgamesa.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Max Krummenacher [Mon, 28 Nov 2022 08:41:22 +0000 (09:41 +0100)]
u-boot-initial-env: rework make target
With LTO enabled the U-Boot initial environment is no longer stored
in an easy accessible section in env/common.o. I.e. the section name
changes from build to build, its content maybe compressed and it is
annotated with additional data.
Drop trying to read the initial env with elf tools from the compiler
specific object file in favour of adding and using a host tool with
the only functionality of printing the initial env to stdout.
See also:
https://lore.kernel.org/all/
927b122e-1f62-e790-f5ca-
30bae4332c77@foss.st.com/
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Fri, 25 Nov 2022 11:56:29 +0000 (12:56 +0100)]
firmware: scmi: use protocol node name to bind the scmi regulator driver
In scmi firmware driver, it is better to bind the scmi protocol driver
"scmi_voltage_domain" with the node name of the protocol 17 and not
the sub-node named "regulator", because is a fixed string which doesn't
provide information and because it is not aligned with the other scmi
protocol nodes.
For example on stm32mp135f-dk board with device tree in stm32mp131.dtsi
scmi: scmi {
compatible = "linaro,scmi-optee";
#address-cells = <1>;
#size-cells = <0>;
linaro,optee-channel-id = <0>;
shmem = <&scmi_shm>;
scmi_clk: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
scmi_voltd: protocol@17 {
reg = <0x17>;
scmi_regu: regulators {
#address-cells = <1>;
#size-cells = <0>;
scmi_reg11: voltd-reg11 {
reg = <VOLTD_SCMI_REG11>;
regulator-name = "reg11";
};
scmi_reg18: voltd-reg18 {
reg = <VOLTD_SCMI_REG18>;
regulator-name = "reg18";
};
scmi_usb33: voltd-usb33 {
reg = <VOLTD_SCMI_USB33>;
regulator-name = "usb33";
};
};
};
};
Before the patch:
> dm tree
scmi_agent 0 [ + ] scmi-over-optee |-- scmi
clk 1 [ + ] scmi_clk | |-- protocol@14
...
reset 1 [ ] scmi_reset_domain | |-- protocol@16
nop 2 [ + ] scmi_voltage_domain | `-- regulators
regulator 0 [ + ] scmi_regulator | |-- voltd-reg11
regulator 1 [ + ] scmi_regulator | |-- voltd-reg18
regulator 2 [ + ] scmi_regulator | |-- voltd-usb33
...
after the patch:
> dm tree
scmi_agent 0 [ + ] scmi-over-optee |-- scmi
clk 1 [ + ] scmi_clk | |-- protocol@14
...
reset 1 [ ] scmi_reset_domain | |-- protocol@16
nop 2 [ + ] scmi_voltage_domain | `-- protocol@17
regulator 0 [ + ] scmi_regulator | |-- voltd-reg11
regulator 1 [ + ] scmi_regulator | |-- voltd-reg18
regulator 2 [ + ] scmi_regulator | |-- voltd-usb33
...
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marc Kleine-Budde [Wed, 23 Nov 2022 11:55:33 +0000 (12:55 +0100)]
tools: mkimage: add new image type "fdt_legacy"
If the user select the image type "flat_dt" a FIT image will be build.
This breaks the legacy use case of putting a Flat Device Tree into a
legacy u-boot image.
Add a new image type "fdt_legacy" to build a legacy u-boot image
with a "flat_dt" type.
Link: https://lore.kernel.org/all/20221028155205.ojw6tcso2fofgnhm@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Marc Kleine-Budde [Wed, 23 Nov 2022 11:55:32 +0000 (12:55 +0100)]
tools: mkimage: don't print error message "Success" in case of failure
In case there's no struct image_type_params::set_header callback, no
"errno" will be set. Don't fail with an error message, followed by
"Success". Remove the printing of the human readable "errno" value.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mikhail Ilin [Wed, 23 Nov 2022 11:31:03 +0000 (14:31 +0300)]
tools: fdtgrep: Fix handle leak
The handle "fd" was created in fdtgrep.c:708 by calling the
"open" function and is lost in fdtgrep.c:716 and fdtgrep.c:723.
Close file descriptor 'fd' before exiting with an error from function
utilfdt_read_err_len(const char *filename, char **buffp, off_t *len).
Fixes:
1043d0a0296a ("fdt: Add fdtgrep tool")
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mikhail Ilin [Wed, 23 Nov 2022 09:39:36 +0000 (12:39 +0300)]
tools: mkimage: Fix nullptr at strchr()
The copy_datafile(ifd, params.datafile) function has been
implemented to copy data by reducing the number of lines in the main
function.
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
Mikhail Ilin [Tue, 22 Nov 2022 08:00:55 +0000 (11:00 +0300)]
fs: ext4: Fix free(NULL)
The 'depth_dirname', 'ptr', 'parent_inode' and 'first_inode' pointers
may be null. Thus, it is necessary to check them before using free() to
avoid free(NULL) cases.
Fixes:
934b14f2bb30 ("ext4: free allocations by parse_path()")
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
Mikhail Ilin [Fri, 18 Nov 2022 11:50:24 +0000 (14:50 +0300)]
tool: ifwitool: Fix buffer overflow
An incorrect 1st parameter is passed to the fix_member()
function. Should use a pointer to the beginning of the parent structure
(bpdt or subpart_dir, because are boxed), not to their fields. Otherwise,
this leads to an overrun of the structure boundary, since in the
fix_member() function, an 'offset' is made, relative to the 1st argument,
which itself is an 'offset' from the beginning of the structure.
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mikhail Ilin [Fri, 18 Nov 2022 08:50:02 +0000 (11:50 +0300)]
tool: ifwitool: The function localtime() can return NULL.
This will cause the local_time pointer is passed as the 4th argument
to function strftime() to also point to NULL. This result in a
segmentation fault. Thus, it's necessary to add a check of the local_time
pointer to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jaehoon Chung [Thu, 13 Oct 2022 08:41:21 +0000 (17:41 +0900)]
tools: env: fw_env: Fix unused-result warning
Fix unused-result warning about fread.
tools/env/fw_env.c: In function ‘find_nvmem_device’:
tools/env/fw_env.c:1751:3: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
1751 | fread(buf, sizeof(buf), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tom Rini [Wed, 7 Dec 2022 23:08:01 +0000 (18:08 -0500)]
Merge branch '2022-12-07-Kconfig-migrations' into next
- Import another batch of Kconfig migrations and in this case, also
legacy code removal.
Tom Rini [Sun, 27 Nov 2022 15:25:36 +0000 (10:25 -0500)]
net: Remove eth_legacy.c
As there are no more non-DM_ETH cases for networking, remove this legacy
file and update the Makefile to match current usage.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:35 +0000 (10:25 -0500)]
qe: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:34 +0000 (10:25 -0500)]
usb: gadget: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:33 +0000 (10:25 -0500)]
usb: eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code fro usb_ether itself.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:32 +0000 (10:25 -0500)]
usb: eth: smsc95xx: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:31 +0000 (10:25 -0500)]
usb: eth: r8152: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:30 +0000 (10:25 -0500)]
usb: eth: msc7830: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:29 +0000 (10:25 -0500)]
usb: eth: asix88179: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:28 +0000 (10:25 -0500)]
usb: eth: asix: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:27 +0000 (10:25 -0500)]
net: keystone_net: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:26 +0000 (10:25 -0500)]
net: cpsw: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:25 +0000 (10:25 -0500)]
net: sunxi_emac: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:24 +0000 (10:25 -0500)]
net: smc911x: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:23 +0000 (10:25 -0500)]
net: sh_eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:22 +0000 (10:25 -0500)]
net: rtl8169: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:21 +0000 (10:25 -0500)]
net: rtl8139: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:20 +0000 (10:25 -0500)]
net: phy: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:19 +0000 (10:25 -0500)]
net: pcnet: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:18 +0000 (10:25 -0500)]
net: netconsole: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:17 +0000 (10:25 -0500)]
net: mvgbe: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:16 +0000 (10:25 -0500)]
net: mcfmii: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:15 +0000 (10:25 -0500)]
net: macb: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:14 +0000 (10:25 -0500)]
net: ldpaa_eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:13 +0000 (10:25 -0500)]
net: fsl-mc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:12 +0000 (10:25 -0500)]
net: fec_mxc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:11 +0000 (10:25 -0500)]
net: ethoc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:10 +0000 (10:25 -0500)]
net: eepro100: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:09 +0000 (10:25 -0500)]
net: e1000: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:08 +0000 (10:25 -0500)]
net: dm9000x: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:07 +0000 (10:25 -0500)]
net: designware: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:06 +0000 (10:25 -0500)]
net: dc2114x: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:05 +0000 (10:25 -0500)]
net: fm: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:04 +0000 (10:25 -0500)]
net: tsec: Remove non-DM_ETH support code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code. Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:03 +0000 (10:25 -0500)]
global: Remove extraneous DM_ETH imply/select
We only need to enable DM_ETH if we have a networking driver. All
networking drivers depend on DM_ETH being enabled, and their selection
ensures DM_ETH will be enabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:02 +0000 (10:25 -0500)]
net: Remove extraneous dependencies
With DM_ETH being required now for all drivers, we don't need this
listed on individual drivers as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:25:00 +0000 (10:25 -0500)]
chromebook_samus_tpl: Disable SPL networking
We don't appear to actually use networking in SPL here, disable it.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sun, 27 Nov 2022 15:24:59 +0000 (10:24 -0500)]
topic_miami*: Disable networking support more fully
This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Tom Rini [Sun, 27 Nov 2022 15:24:58 +0000 (10:24 -0500)]
pinecube: Disable networking support more fully
This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.
Cc: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:24:57 +0000 (10:24 -0500)]
LicheePi_Zero: Disable networking support more fully
This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.
Cc: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 27 Nov 2022 15:24:56 +0000 (10:24 -0500)]
xenguest_arm64: Disable networking support more fully
This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.
Cc: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 6 Dec 2022 20:47:59 +0000 (15:47 -0500)]
Merge branch '2022-12-06-update-to-gcc-12-clang-14' into next
- Bring in changes to default CI to using gcc-12.2 and clang-14 for
building.
Tom Rini [Tue, 22 Nov 2022 17:31:58 +0000 (12:31 -0500)]
CI: Update to gcc-12.2
- Update to gcc-12.2, and cherry-pick a fix in grub for risc-v
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 22 Nov 2022 17:31:57 +0000 (12:31 -0500)]
pogo_v4: Disable LTO
With gcc-12.2 we now get:
lib/zlib/inflate.c:360: undefined reference to `__gnu_thumb1_case_si'
when building this platform. This seems like some odd problem with LTO
and Thumb, but since the platform continues to link, I assume it's
within size constraints, so lets just disable LTO for now.
Cc: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 22 Nov 2022 17:31:56 +0000 (12:31 -0500)]
arm: Use the WEAK assembly entry point consistently
It is a bad idea, and more modern toolchains will fail, if you declare
an assembly function to be global and then weak, instead of declaring it
weak to start with. Update assorted assembly files to use the WEAK macro
directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Tom Rini [Tue, 22 Nov 2022 17:31:55 +0000 (12:31 -0500)]
event: Re-add file paths to the tests
Now that we are enforcing dwarf-4 to be used we will have the full file
paths present.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 22 Nov 2022 17:31:54 +0000 (12:31 -0500)]
Makefile: Enforce DWARF4 output
At this point in time, using DWARF-5 format isn't easy to do by default
with all toolchains that we support. And relying on the implicit
default can lead to mixing 4 and 5 and then the debug info not being
useful to tools. For now, enforce using DWARF-4 only.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 22 Nov 2022 17:31:53 +0000 (12:31 -0500)]
buildman: Fetch 12.2.0 toolchains by default
Update the toolchain list to be first 12.2.0 and second 11.1.0 and
that's it.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Wed, 12 Oct 2022 17:13:11 +0000 (19:13 +0200)]
powerpc: fix fdt_fixup_liodn_tbl_fman()
Builiding with GCC 12.2 fails:
arch/powerpc/cpu/mpc85xx/liodn.c: In function 'fdt_fixup_liodn_tbl_fman':
arch/powerpc/cpu/mpc85xx/liodn.c:340:35: error: the comparison will
always evaluate as 'false' for the address of 'compat'
will never be NULL [-Werror=address]
340 | if (tbl[i].compat == NULL)
|
Remove the superfluous check.
Fixes:
97a8d010e029 ("net/fman: Support both new and legacy FMan Compatibles")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Tue, 6 Dec 2022 02:04:24 +0000 (21:04 -0500)]
Merge branch '2022-12-05-Kconfig-migrations-and-renames' into next
- First batch of the patches that end up with
scripts/config_whitelist.tx being empty. Mostly migrations and a
little bit of code removal and CFG renaming.
Tom Rini [Sat, 19 Nov 2022 23:45:45 +0000 (18:45 -0500)]
m68k: Rename CONFIG_WATCHDOG_TIMEOUT to CONFIG_WATCHDOG_TIMEOUT_MSECS
In practice, it is clear that the usage in m68k of
CONFIG_WATCHDOG_TIMEOUT is setting a value in milliseconds. Rename this
to the existing symbol and move to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:44 +0000 (18:45 -0500)]
post: Migrate to Kconfig
We move the existing CONFIG_POST_* functionality over to CFG_POST and
then introduce CONFIG_POST to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sat, 19 Nov 2022 23:45:43 +0000 (18:45 -0500)]
sandbox: Rework how SDL is enabled / disabled
Given that we can use Kconfig logic directly to see if we have a program
available on the host or not, change from passing NO_SDL to instead
controlling CONFIG_SANDBOX_SDL in Kconfig directly. Introduce
CONFIG_HOST_HAS_SDL as the way to test for sdl2-config and default
CONFIG_SANDBOX_SDL on if we have that, or not.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sat, 19 Nov 2022 23:45:42 +0000 (18:45 -0500)]
scripts/config_whitelist.txt: Remove more referenced symbols
Perform some deeper investigation on the remaining symbols listed in
this file and remove more.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sat, 19 Nov 2022 23:45:41 +0000 (18:45 -0500)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:40 +0000 (18:45 -0500)]
net: ftmac100: Remove non-DM_ETH code
At this point all users of this driver enable DM_ETH, so remove the
legacy code paths.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tom Rini [Sat, 19 Nov 2022 23:45:39 +0000 (18:45 -0500)]
Convert CONFIG_VSC7385_ENET et al to Kconfig
This converts the following to Kconfig:
CONFIG_VSC7385_ENET
CONFIG_VSC9953
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:38 +0000 (18:45 -0500)]
Convert CONFIG_USB_GADGET_AT91 to Kconfig
This converts the following to Kconfig:
CONFIG_USB_GADGET_AT91
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:37 +0000 (18:45 -0500)]
Nokia RX-51: Migrate legacy USB device options to Kconfig
Move a number of legacy USB UDC options to Kconfig, over from the config
header.
Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:36 +0000 (18:45 -0500)]
Convert CONFIG_TEGRA_CLOCK_SCALING et al to Kconfig
This converts the following to Kconfig:
CONFIG_TEGRA_CLOCK_SCALING
CONFIG_TEGRA_LP0
CONFIG_TEGRA_PMU
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:35 +0000 (18:45 -0500)]
Convert CONFIG_TPS6586X_POWER et al to Kconfig
This converts the following to Kconfig:
CONFIG_TPS6586X_POWER
CONFIG_TWL6030_POWER
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:34 +0000 (18:45 -0500)]
Convert CONFIG_SPD_EEPROM to Kconfig
This converts the following to Kconfig:
CONFIG_SPD_EEPROM
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:33 +0000 (18:45 -0500)]
Convert CONFIG_SMSC_LPC47M et al to Kconfig
This converts the following to Kconfig:
CONFIG_SMSC_LPC47M
CONFIG_SMSC_SIO1007
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:32 +0000 (18:45 -0500)]
Convert CONFIG_SH_GPIO_PFC et al to Kconfig
This converts the following to Kconfig:
CONFIG_SH_GPIO_PFC
CONFIG_TMU_TIMER
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:31 +0000 (18:45 -0500)]
Convert CONFIG_RTC_DS1337 et al to Kconfig
This converts the following to Kconfig:
CONFIG_RTC_DS1337
CONFIG_RTC_DS1337_NOOSC
CONFIG_RTC_DS1338
CONFIG_RTC_DS1374
CONFIG_RTC_DS3231
CONFIG_RTC_MC13XXX
CONFIG_RTC_MXS
CONFIG_RTC_PT7C4338
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:30 +0000 (18:45 -0500)]
Convert CONFIG_PCA953X to Kconfig
This converts the following to Kconfig:
CONFIG_PCA953X
Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:29 +0000 (18:45 -0500)]
Convert CONFIG_NAND_KMETER1 et al to Kconfig
This converts the following to Kconfig:
CONFIG_NAND_ECC_BCH
CONFIG_NAND_KIRKWOOD
CONFIG_NAND_KMETER1
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:28 +0000 (18:45 -0500)]
Convert CONFIG_MXS_OCOTP to Kconfig
This converts the following to Kconfig:
CONFIG_MXS_OCOTP
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:27 +0000 (18:45 -0500)]
arm: Remove unused mx27 code
We no longer have any i.MX27 platforms, remove the remaining support
code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:26 +0000 (18:45 -0500)]
arm: samsung: Move CONFIG_MISC_COMMON to Kconfig
This option controls using board/samsung/common/misc.c, so add a Kconfig
file there as well and select it from the boards which use this
functionality.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Tom Rini [Sat, 19 Nov 2022 23:45:25 +0000 (18:45 -0500)]
arm: ls102xa: Migrate LS102XA_STREAM_ID
This symbol appears to be globally used in the architecture, select it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:24 +0000 (18:45 -0500)]
arm: lpc32xx: Remove unused hsuart driver
This driver is not enabled in any config currently, remove it.
Cc: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:23 +0000 (18:45 -0500)]
sandbox: Move CONFIG_IO_TRACE to Kconfig
This is only used on sandbox, so select it there.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sat, 19 Nov 2022 23:45:22 +0000 (18:45 -0500)]
Convert CONFIG_IOMUX_SHARE_CONF_REG et al to Kconfig
This converts the following to Kconfig:
CONFIG_IOMUX_LPSR
CONFIG_IOMUX_SHARE_CONF_REG
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:21 +0000 (18:45 -0500)]
Convert CONFIG_IODELAY_RECALIBRATION to Kconfig
This converts the following to Kconfig:
CONFIG_IODELAY_RECALIBRATION
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 19 Nov 2022 23:45:20 +0000 (18:45 -0500)]
mpc8548cds: Migrate CONFIG_INTERRUPTS to Kconfig
Only this platform sets this option, define it in the board Kconfig
file.
Signed-off-by: Tom Rini <trini@konsulko.com>