Oswald Buddenhagen [Fri, 7 Dec 2012 19:19:03 +0000 (20:19 +0100)]
stop defining QT.<module>.sources
it's the very antithesis of modularization to do it.
Task-number: QTBUG-27722
Change-Id: I2540e1a70e67b55420246d0c209314c05c65a85f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Stephen Kelly [Fri, 7 Dec 2012 12:28:43 +0000 (13:28 +0100)]
Remove win32/thread.prf and thread_off.prf
The variables these files refer to are not set anywhere anymore.
The Unix thread.prf file is still needed, as it is still effective and
is activated by qt.prf.
Task-number: QTBUG-25106
Change-Id: Ia514192d28785205df3710d78ee597285d4136b0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Oswald Buddenhagen [Thu, 13 Dec 2012 11:31:02 +0000 (12:31 +0100)]
add .rpath only for dynamic unix builds
rpath is meaningless for static libraries.
and windows has no concept of rpaths to start with.
Change-Id: Ia02bbdfbf7112e7082175c3051c0839ac0900f57
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Eskil Abrahamsen Blomfeldt [Thu, 13 Dec 2012 09:07:48 +0000 (10:07 +0100)]
Mark QAbstractTextDocumentLayout test as insignificant
This test fails on some setups and a pending critical change
causes the existing bug to trigger in CI. To avoid blocking
other changes because of this bug, it's been marked as
insignificant until such a time when it can be fixed.
Change-Id: Ide41f7b1c76209f9c05f95f996b2364d5dea5e67
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
(cherry picked from commit
02032fb229e4a26b2848db60e90820e2daeb3363)
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Eskil Abrahamsen Blomfeldt [Thu, 13 Dec 2012 07:30:29 +0000 (08:30 +0100)]
Mark QGlyphRun and QStaticText tests as insignificant on Linux
These tests have been failing on certain setups for a while,
but some new critical changes causes the failure to trigger
on the CI system as well. We mark them as insignificant until
they can be fixed.
Change-Id: I467e7030c55d6f23515275b4062c17068d2b688c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
(cherry picked from commit
04f25ac46ca0956dfd1209b14a1eee9e2e1274c2)
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Jiang Jiang [Wed, 11 Jul 2012 12:39:54 +0000 (14:39 +0200)]
Fix styleName support in QPA font database
Font styleName support was disconnected since Qt switched to QPA
fontdatabase. Now add the code from Qt 4.8 back to enable this in
QPA.
Change-Id: Iab2cbfd5468f87542183348c2123ca4b2c270692
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from commit
fa7661d8b25fa338649a301010e1b5a2b63da731)
Liang Qi [Tue, 30 Oct 2012 13:01:12 +0000 (14:01 +0100)]
Mac: fix bugs for font selection in QFontDialog
Use localized family name and style name when selecting font with
non-English locale
Task-number: QTBUG-27415
Change-Id: Ie81507ed011fc096e0f5edad146e97c392e86494
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from commit
3c09f6bc9aee0c97427fe8da6efdc73b4ac473aa)
J-P Nurmi [Thu, 13 Dec 2012 12:16:42 +0000 (13:16 +0100)]
Fix QGtkPainter::reset() to reset the clip rect
Due to preparation for GTK3 support, QGtkStyle::drawXxx() no longer
creates a local instance of QGtkPainter upon every call, but
QGtkStylePrivate::gtkPainter() will (in the future) dynamically choose
between QGtk[2|3]Painter. The same painter instance is now re-used
between the calls, but wasn't properly reseted between.
Task-number: QTBUG-28557
Change-Id: I29be318dbb54d97ed23dfb88d406a3a833db4369
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
(cherry picked from commit
0b0b74a563d1513e7857000526d5c0fa462ff6af)
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Frederik Gladhorn [Sat, 3 Nov 2012 18:21:12 +0000 (19:21 +0100)]
Accessible: Improve value interface
The stepSize property was missing in Qt 4 and is
a sensible addition to the value interface.
Change-Id: I7571800d50ee7e4194c09c4db40300809a1ce45a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Erik van Pienbroek [Tue, 11 Dec 2012 22:58:19 +0000 (23:58 +0100)]
DirectWrite support on MinGW needs _WIN32_WINNT to be set to 0x0600
The file qwindowsfontenginedirectwrite.cpp uses the Win32 API function
GetUserDefaultLocaleName which requires _WIN32_WINNT to be set to 0x0600
as it only became available in Windows Vista
Change-Id: I704705d3fc729bb0167121de991d01c957e1e7e4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Erik van Pienbroek [Mon, 10 Dec 2012 20:34:48 +0000 (21:34 +0100)]
Add directwrite support to the configure script
The configure.exe already supported the -directwrite flag for some time.
This commit adds this flag to the configure script as well so
environments which use MinGW as cross-compiler can now also
optionally enable DirectWrite support.
The original configure.exe pieces were added in commit
c0fed43b04dec8bd549043d3ea5e28908128082c of the Qt4 repository.
The directwrite argument which this commit adds to the configure
script and the behaviour of it should be exactly the same as the
current configure.exe.
To get Qt built with DirectWrite support using the MinGW-w64 toolchain
at least mingw-w64 trunk revision 5451 (Nov 10 2012) is needed
Change-Id: I519718068cf5732c7ebcbf0a0fafb6b747db0bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Christiaan Janssen [Wed, 12 Dec 2012 10:26:04 +0000 (11:26 +0100)]
OpenGL Examples: added example path for QtCreator
This was introduced in patch
8534bb3d, then overwritten by
c85ca8d1.
Change-Id: I6b7489e2b2f3311822c282f50c74bd68c787229d
Reviewed-by: hjk <qthjk@ovi.com>
Shawn Rutledge [Wed, 12 Dec 2012 11:55:21 +0000 (12:55 +0100)]
De-inline all setters in QWindow
If we don't do this, we can have binary compatibility issues later.
For example https://codereview.qt-project.org/#change,41700 will change
the behavior of setWidth and setHeight to call setSize instead of
setGeometry, because we don't want changing the height to also set
the position of a window; if x and y are left uninitialized it needs
to remember that fact. But if setWidth is left as an inline method,
calling setGeometry, then an application which was built with 5.0
would behave differently than an application built with 5.1, even if
Qt is upgraded after the application was built. To generalize,
setters should never be inlined.
Change-Id: I1ec42cb61a45fe541b3f3bb99d1b1ca24ad2a517
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Friedemann Kleint [Wed, 12 Dec 2012 09:43:29 +0000 (10:43 +0100)]
test: Skip tst_QMdiArea::nativeSubWindows() on Windows/ANGLE.
Task-number: QTBUG-28545
Change-Id: Ifa698b9efe38654c8f8fbcc184db5d176df7ba47
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Martin Smith [Tue, 11 Dec 2012 13:53:29 +0000 (14:53 +0100)]
qdoc: Make links to \target work intermodule
\target sets up a unique target that should be
accessible with \l across module boundaries.
This was not working across module boundaries.
Now it has been fixed, and it is one way of
handling the problem described in the referenced
bug report.
Task-number: QTBUG-28244
Change-Id: I541f409b998f84b2b8dcf66751762cf07f9f108b
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Samuel Rødal [Wed, 12 Dec 2012 08:15:14 +0000 (09:15 +0100)]
Made QWidget::setWindowOpacity work with the XCB platform plugin.
Ported the rather trivial implementation from Qt 4.
Task-number: QTBUG-28477
Change-Id: I44e14a3c150af43c6b9b880242b655fe06084fd7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Vitaliy Kharin [Mon, 10 Dec 2012 14:45:31 +0000 (18:45 +0400)]
QSpanData: use isAffine() instead of rolling your own test
QSpanData did not properly check that whether the matrix is an affine
transformation or not. Therefore, qt paint engine chose the wrong
algorithm for drawing in case of a perpective matrix.
Change-Id: If0523bd45e86679a08874713da3fbe33a9852551
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Gunnar Sletta [Tue, 11 Dec 2012 15:58:14 +0000 (16:58 +0100)]
Some fixes to the OpenGL docs in GUI
Change-Id: I6415ff16b1765a5814d50a4cd39db00495d43073
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Alejandro Exojo [Tue, 20 Nov 2012 09:12:32 +0000 (10:12 +0100)]
Add directory to xcb-static.pro's INCLUDEPATH
In src/3rdparty/xcb/xcb-util-image/xcb_image.c, the includes require all
this directories, or otherwise compiliation fails when -qt-xcb is used
in the configure step.
Change-Id: I8566bea662eced144cb9a2b1ce1dbfdb65654dea
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Florian Hänel [Fri, 28 Sep 2012 13:00:48 +0000 (15:00 +0200)]
FreeType bitmaps interpreted in wrong format
We ask grayscale or mono bitmaps from FreeType but in some cases treat
the output as ARGB without conversion. This surfaces using QGLWidget as
a viewport to QDeclarative content. The offending glyphs are then
generated through QTextureGlyphCache::textureMapForGlyph. This adds a
fix for converting to the expected ARGB32 data.
Change-Id: Ia219582ebd76b7e4e9379111a42312b4d97718de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Morten Johan Sorvig [Mon, 10 Dec 2012 10:29:54 +0000 (11:29 +0100)]
Improve Cocoa platform plugin loading.
Loading both the debug and release version of the cocoa
plugins causes the objective-c runtime to print "duplicate
class definitions" warnings.
Fix this by directing the plugin loader to only load
one of the cocoa plugins if both are available. Implement
this as a special case directly in QFactoryLoader.
Define QT_NO_DEBUG_PLUGIN_CHECK to allow mixing
debug and release builds.
Task-number: QTBUG-28155
Change-Id: Ie1927b219cc501a821f91b7e4b56f0589e0acbf5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Thiago Macieira [Tue, 11 Dec 2012 22:24:05 +0000 (14:24 -0800)]
Document the new load / store methods in QAtomic{Int,Pointer}
Task-number: QTBUG-24627
Change-Id: Iaa2573aa8f0f36cac81efa73020c2f365bfcba53
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Thiago Macieira [Tue, 11 Dec 2012 20:06:31 +0000 (12:06 -0800)]
Doc: Remove the mention of non-atomic convenience operators in QAtomic
For two reasons: 1) those operators are gone and 2) the ones that remain
are atomic.
Task-number: QTBUG-28532
Task-number: QTBUG-24627
Change-Id: I1e9d1b076d923546c1ee3d45f312066590f97416
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Sergio Ahumada [Tue, 11 Dec 2012 20:28:51 +0000 (21:28 +0100)]
test: Mark cmake tests as insignificant when -no-widgets is used
Task-number: QTBUG-28540
Change-Id: Iaa238ce8fb857ec8856dd9d6f3adc49795db1de1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Morten Johan Sorvig [Tue, 11 Dec 2012 12:37:40 +0000 (13:37 +0100)]
Partially revert
e84e86dc.
Make tst_qquickview::resizemodeitem pass.
Returning on equal geometry breaks for non-top-level
windows.
Change-Id: I3b361655e25b6cf2d5e29410dc1f3567ab8f54d9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Jan Arve Saether [Fri, 7 Dec 2012 14:29:06 +0000 (15:29 +0100)]
a11y: Do not refer to destructed QObject in Windows bridge
The crash could happen if a QWidget in the UI got deleted, and
the AT client later tried to access the widget through the cache
(qAccessibleRecentSentEvents()).
Solution: Use a QPointer as a guard.
Task-number: QTBUG-26187
Change-Id: I1aa716766626cf171757e76ba255a6d5ae4fd854
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Joerg Bornemann [Tue, 11 Dec 2012 10:31:41 +0000 (11:31 +0100)]
qmake: fix manifest embedding for DLLs
Manifests must be embedded into DLLs with the resource id 2, not 1.
This fixes a regression introduced in commit
c9406bcf.
Task-number: QTBUG-28524
Change-Id: I93b1dfe4614d0535f47fd881b8688a23e83e845f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ismo Haataja <ismo.haataja@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
J-P Nurmi [Tue, 11 Dec 2012 14:44:14 +0000 (15:44 +0100)]
Mac: disable transient scrollbar animations for non-QScrollBars
Task-number: QTBUG-28389
Task-number: QTBUG-28380
Change-Id: I91edd9c8aba60118d722bbf9ad5b85f994398823
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
J-P Nurmi [Mon, 10 Dec 2012 13:09:55 +0000 (14:09 +0100)]
QApplication docs: restore console mode -snippet
Change-Id: I1f8ce949ae660a209a2092a2863d5c25e2908004
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
J-P Nurmi [Mon, 10 Dec 2012 13:31:50 +0000 (14:31 +0100)]
QScrollBar::initStyleOption(): fix QStyle::State_On handling
QWindowsStyle considers QStyle::State_On as pressed, whereas
QMacStyle uses the same state for transient scrollbars. Thus,
to indicate transient scrollbars, QScrollBar::initStyleOption()
must set QStyle::State_On only when the current style actually
supports transient scrollbars.
Task-number: QTBUG-28523
Change-Id: I94d207b1e8c5c4bd6f4b99e8b4f1661197fbe9dd
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Kai Koehne [Tue, 11 Dec 2012 09:46:56 +0000 (10:46 +0100)]
Fix compilation with (all versions of) MinGW
Commit
320b16110f0f9cef032a64846dc792d40ccd367b changed the arguments
of swprintf to be compliant with latest MinGW-w64 headers: The headers now
excludes the non-standard swprintf(wchar*t,wchar_t*,...) version for C++11.
However, the swprintf(wchar_t*,size_t,wchar_t*,...) version is actually
not supported by e.g. stock Mingw-32 from mingw.org.
Instead, use _snwprintf(wchar_t*,size_t,wchar_t*,...), which both
MSVC, and all MinGW versions should support.
Task-number: QTBUG-28520
Change-Id: Icadd11773a25143e46a72c898adfd1c324f9c468
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Jerome Pasion [Tue, 11 Dec 2012 15:13:28 +0000 (16:13 +0100)]
Doc CSS: Edited CSS line-height of paragraphs and landing page.
-value copied from qt-project.org
-more room between lines of text and the list at the landing page.
Change-Id: Iee995325ded0c803feca44d112c5e73a024917bb
Reviewed-by: hjk <qthjk@ovi.com>
Miikka Heikkinen [Tue, 11 Dec 2012 14:02:45 +0000 (16:02 +0200)]
Automatically import plugins in all applications with static Qt
Since all gui applications already need some QPA plugin added,
we might as well add the default plugin and generate the code
to import the plugins automatically.
User can opt out from the automation by removing relevant
items from CONFIG variable: link_qpa_plugin or import_plugins.
Task-number: QTBUG-28131
Change-Id: Ic171c363464c099143374d3e39bcc28f6edf73d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nico Vertriest [Tue, 11 Dec 2012 08:04:01 +0000 (09:04 +0100)]
Hardcoded url for RFC 1929 QTBUG-28500
Entered hardcoded url for RFC 1928 QTBUG-28500
Corrected in qtnetworkproxy.cpp
Change-Id: Idad0e2294e610095990a65ffc7d5c9c881b09329
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Thorbjørn Lund Martsum [Sun, 2 Dec 2012 16:04:47 +0000 (17:04 +0100)]
QGraphicsView - fix rubberband to expand on wheel event
In SHA
51914375b615ddcac711171ac31779fea01b4323 the rubberband
selection was fixed, so it followed the scene-point on mousemove.
However wheelEvent could move the view - but avoid update of the
rubberband (that would not be updated until next mouse-move).
This patch fixes that (and generally improves rubberband behavior)
since QGraphicsViewPrivate::mouseMoveEventHandler is called by
replayLastMouseEvent, which is called from various places,
where we need to update the rubberband (e.g scrollContentsBy).
Change-Id: I1b78c27edaaecea797a2319086d7a11d437d2bd3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Samuel Rødal [Tue, 11 Dec 2012 10:53:46 +0000 (11:53 +0100)]
Remove incorrect and confusing documentation from qplatformwindow.cpp
Change-Id: If3fd383bf7ff08a04df2e11c727c11aeef05a6de
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Samuel Rødal [Tue, 11 Dec 2012 08:32:24 +0000 (09:32 +0100)]
Consistently prefix all platform plugin libraries with "q".
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Thorbjørn Lund Martsum [Mon, 3 Dec 2012 20:37:16 +0000 (21:37 +0100)]
QGraphicsView - move rubberband-handling into a private function
This patch moves the rubberband-handling from QGraphicsView::mouseMoveEvent
to QGraphicsViewPrivate::updateRubberBand. This function is then
called from QGraphicsView::mouseMoveEvent.
I have removed some d-> and added some q-> but beside that
nothing is changed in the code.
Change-Id: Iab70c55635c43733e0e02bb70e2bb03b90bf62f0
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Robert Loehning [Mon, 10 Dec 2012 12:08:40 +0000 (13:08 +0100)]
Fixed leading tab
Change-Id: I357bf802cde3d842a7af0c13845cfda55b9c7b59
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Elvis Lee [Thu, 29 Nov 2012 08:38:05 +0000 (17:38 +0900)]
configure : remove .qmake.vars after status message.
Change-Id: I3a4c1c10ce0d27d05faf64049224e0022a414fa4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Stephen Kelly [Fri, 7 Dec 2012 11:39:12 +0000 (12:39 +0100)]
Remove QT_DLL and QT_NODLL defines.
Task-number: QTBUG-28044
Change-Id: Ib8c4e1e8e52703aa6590875c34f05b6bc71db808
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Thorbjørn Lund Martsum [Tue, 11 Dec 2012 06:29:44 +0000 (07:29 +0100)]
QGraphicsView - add const to a not modified local variable
The QPointF ep is not modified. There is no reason it shouldn't
be const.
Change-Id: I41fb8f9ae5296a7a40f7eb8be13fc14d56915e3f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Thorbjørn Lund Martsum [Tue, 11 Dec 2012 05:42:28 +0000 (06:42 +0100)]
QGraphicsView - remove reference to avoid weird code.
Even though the code before theoretic is ok, we really shouldn't
have a reference since mapFromScene returns a QPointF and not a
const QPointF&.
Change-Id: I5ea8fd238bdbdd21fb1e3b6b5f280d45e3bc43ef
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Oswald Buddenhagen [Mon, 10 Dec 2012 18:29:33 +0000 (19:29 +0100)]
install a sane top-level examples.pro file
generally, don't install anything from the top-level examples dirs
automatically. the global README and the aggregator examples.pro are
installed explicitly.
Change-Id: I5f6b8760f37d917b800fa85979896a471778cac0
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Oswald Buddenhagen [Fri, 7 Dec 2012 19:17:59 +0000 (20:17 +0100)]
remove bizarre jsc source reference
it compiles just fine without it.
if this was meant to inject a newer version of JSC than what is in
QtScript, it can be redone without creating a bizarre hybrid.
Change-Id: I61fe60bfa6a9bdb6423e8a7135250e332a5835ec
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Oswald Buddenhagen [Mon, 10 Dec 2012 10:13:05 +0000 (11:13 +0100)]
re-enable "check" targets for all projects, but with opt-out possibility
the feature was backported to qt 4.8, and people apparently started to
rely on it. it doesn't add too much overhead when not used, so enable it
by default again.
Change-Id: I15890027603ede733347f2c05b36ad1389c649cf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Oswald Buddenhagen [Sat, 8 Dec 2012 10:47:31 +0000 (11:47 +0100)]
fix static lib dep addition
leave MODULE_LIBS unmodified - MODULE_LIBS_ADD takes the role of the
filtered variable.
Change-Id: I2a67078bbc453eccc08317a1ca8e3228cbc3a8f7
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nico Vertriest [Tue, 11 Dec 2012 09:42:11 +0000 (10:42 +0100)]
Inserted hardcoded urls for State Charts and S. C. XML
Corrected in qstatemachine
QTBUG-28500
Change-Id: I45b2ffea983ee5754b080b8a6faa18d4d163e578
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Oswald Buddenhagen [Thu, 6 Dec 2012 16:16:56 +0000 (17:16 +0100)]
centralize headersclean test
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Oswald Buddenhagen [Thu, 6 Dec 2012 15:36:57 +0000 (16:36 +0100)]
don't use testlib for headersclean test
this is a compile-only test, and it's not even marked as a testcase in
the autotest system.
Change-Id: I9b48ddad3c8e3e953d0e6fcfa010bab73289bc6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Marc Mutz [Wed, 25 Jul 2012 07:08:33 +0000 (09:08 +0200)]
QMetaType: remember whether a type was registered with Q_DECLARE_METATYPE
There are two ways to register a type: using Q_DECLARE_METATYPE(T) and
using qRegisterMetaType<T>("T"). Doing one thing in one translation
unit and another thing in another TU constitutes an ODR violation,
because the value of QMetaTypeId<T>::Defined will differ in the two
TUs.
By adding the information whether a type was declared with
Q_DECLARE_METATYPE to the typeFlags(), such a use will trigger
the existing binary-incompatibility failure that checks for
equality of the incoming type flags with the stored ones (if any).
I had to encode the type as a defaulted function argument in order
to avoid the linker merging instantiations of the function templates
and therefore rendering the detection moot.
Change-Id: I82017caf300458b411cc8ac2f6653536fac64117
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Topi Reinio [Fri, 7 Dec 2012 10:43:50 +0000 (11:43 +0100)]
QDoc: Fix generated anchors for c++ class signals
Add a missing 's' for plural form for signals. This fixes the linking
to Signals topic in class references.
Task-number: QTBUG-28450
Change-Id: Ic666e608b4b5b40b1f886ea581e54227e1a94678
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 14:29:07 +0000 (15:29 +0100)]
Added url for SVG Color Keyword Names QTBUG-28500
Change-Id: I7aaf2cbd9b4bf4e6ff35fa39c5340e3dbc4225ff
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 14:30:37 +0000 (15:30 +0100)]
Added hardcoded url QTBUG-28500
Change-Id: Ida2bcd8e470cc336db69dcec6130ad942e14d3a0
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 13:36:02 +0000 (14:36 +0100)]
Hardcoded url for Mac Os X Aqua QTBUG-28500
Change-Id: I83d87d155b7ca502098a53e955fdde3c908e3300
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 12:54:57 +0000 (13:54 +0100)]
Hardcoded url Item View Classes QTBUG-28500
Removed link to Item View Classes in Qt4
Change-Id: Ic3c38a33edc88faf072b8fe7e3accfe1ee75ac78
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 12:25:00 +0000 (13:25 +0100)]
Workaround with hardcoded url QT-BUG 28500
Change-Id: I385c14401ced85b12ce65446b224de6910bf3b37
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 11:34:44 +0000 (12:34 +0100)]
Qdoc: workaround, put hardcoded url QTBUG 28500
Change-Id: Iab38307459eff8c20a66f8f41240075aaff1b086
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Mon, 10 Dec 2012 11:13:01 +0000 (12:13 +0100)]
Qdoc: put hardcoded url as workaround QTBUG-28500
Change-Id: Ic9d0805897278d6caaf4cd763352d2d2d98d65f6
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Tue, 11 Dec 2012 09:17:06 +0000 (10:17 +0100)]
Entered hardcoded urls QTBUG-28500
Hardcoded urls for rfc 2109 and 2965
Corrected in qnetworkcookie.cpp
Change-Id: Id3668fec24c3c658437f22a977ea9e631a423aed
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Nico Vertriest [Tue, 11 Dec 2012 07:48:09 +0000 (08:48 +0100)]
Hardcoded url to RFC3174 QTBUG-28500
Corrected in torrent.qdoc
Change-Id: Idb1bf1ed869c0db80e557832a61d6eb28585c77a
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Sergio Ahumada [Mon, 10 Dec 2012 12:39:51 +0000 (13:39 +0100)]
test: Remove CONFIG += testcase from manual tests
Manual tests are not supposed to be run by "make check"
Change-Id: I0539b94f5286e89ddad2edf487d4b0d82fc2f374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
Venugopal Shivashankar [Thu, 6 Dec 2012 18:27:20 +0000 (19:27 +0100)]
Doc: Added documentation for the examples
- Moved documentation for the Qt XML, Qt Widgets, Qt Concurrent, and
Qt Network examples from qtdoc.
- Grouped the documentation pages under relevant groups
- Fixed \snippet paths
Task-number: QTBUG-27515
Change-Id: I43c22a679e2eefbb48e3cd5893aa2afd3d905863
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Kevin Ottens [Fri, 30 Nov 2012 10:51:05 +0000 (11:51 +0100)]
Generate the introspection string during parsing
Commit
0696071316b3dacb8d1ca15a269e4f4215642b9d moved away from QDom but
also lost the ability to fill the introspection field of the created
QDBusIntrospection::Interface instances. This commit now generate the
string again as we proceed with the QXmlStreamReader based parsing.
Task-number: QTBUG-26668
Change-Id: I8f406e1f4e9d3e667a8557db69da36cac369ba4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Jerome Pasion [Thu, 6 Dec 2012 15:17:43 +0000 (16:17 +0100)]
Doc: Restored CSS images for the offline HTML and QCH build
Revert "Doc: Removing entry in CSS for adding icons to HTTP links"
This reverts commit
ceb2799163c7e80148ef0bffafac9b05269514d7.
Also:
-edited image to use Qt Project brand colors
-removed breadcrumbs from CSS
Change-Id: I3c2e655f8eac463677b20b68bc2ffa0efd2fd468
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Caroline Chao [Fri, 16 Nov 2012 14:41:16 +0000 (15:41 +0100)]
SQL: Change in QSqlResultPrivate::positionalToNamedBinding()
With the change
cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
hjk [Mon, 10 Dec 2012 12:23:10 +0000 (13:23 +0100)]
Mark \brief comments in thread examples.
Change-Id: Ib496b1e500820774354c20003edb22748324cb5f
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Konstantin Ritt [Mon, 10 Dec 2012 10:34:29 +0000 (12:34 +0200)]
QLocale: Report RTL text direction for pa_Arab and uz_Arab
Change-Id: I97c785c9cbf550ef1ab330a4905ff7ae97ee6a30
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Shane Kearns [Thu, 6 Dec 2012 17:03:18 +0000 (17:03 +0000)]
Fix binary incompatibility between openssl versions
OpenSSL changed the layout of X509_STORE_CTX between 0.9 and 1.0
So we have to consider this struct as private implementation, and use
the access functions instead.
This bug would cause certificate verification problems if a different
version of openssl is loaded at runtime to the headers Qt was compiled
against.
Task-number: QTBUG-28343
Change-Id: I47fc24336f7d9c80f08f9c8ba6debc51a5591258
Reviewed-by: Richard J. Moore <rich@kde.org>
Stephen Kelly [Mon, 10 Dec 2012 14:42:18 +0000 (15:42 +0100)]
Move a Q_DECLARE_METATYPE higher up in the file.
Having it low in the file causes ODR violations.
Change-Id: I6267c7c1b043e77b251a88cb8940a9f063160891
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Miikka Heikkinen [Mon, 10 Dec 2012 14:11:47 +0000 (16:11 +0200)]
Add QT_DEFAULT_QPA_PLUGIN to generated qconfig.pri
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Miikka Heikkinen [Mon, 10 Dec 2012 13:56:29 +0000 (15:56 +0200)]
Pro-file level support for importing plugins for static Qt builds
Platform plugin is needed always when gui is linked to an application.
This is tedious to do manually for static builds, so provide support
for generating a source file that imports static plugins for
application projects.
"CONFIG += import_plugins" statement in application .pro file will
generate required import statements for all plugins specified with
QTPLUGIN variable.
The plugin class names are found from plugin's module pri generated
automatically when plugin is built, as long as the plugin specifies
the PLUGIN_CLASS_NAME in the plugin .pro file before loading
qt_plugin.prf.
Task-number: QTBUG-28131
Change-Id: I19f8ea48a3c1e9b5c81f4399c4b5d439a6d4bea1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Miikka Heikkinen [Mon, 10 Dec 2012 09:49:09 +0000 (11:49 +0200)]
Add PLUGIN_CLASS_NAME to qtbase plugins
Needed for automating static plugin loading.
Task-number: QTBUG-28131
Change-Id: Icd993c0fc8335f29aeec30e853a408d888069399
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Oliver Wolff [Mon, 10 Dec 2012 13:50:53 +0000 (14:50 +0100)]
Fixed installation of gui examples' targets
Change-Id: Ie945ffac56ed83d2dc4605a073bcab4ef6f290ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Sergio Martins [Fri, 7 Dec 2012 10:49:19 +0000 (10:49 +0000)]
Blackberry: Fix crash when opening file dialog without parent.
If parent is null, we now use qqnxintegration->primaryScreen()
This simplifies ctors of QQnxTheme and QQnxFileDialogHelper which now
receive a QQnxIntegration pointer instead of receiving a font database
and a bps event filter.
Change-Id: I3b1ed4d99f738b980a4f19a98618341a14e0c222
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
David Schulz [Fri, 7 Dec 2012 11:33:47 +0000 (12:33 +0100)]
QtBase: Doc: Fix Links to designer manual.
Change-Id: I87f68fb70aa773c44b90b58bd56fc5585a7e4107
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
David Schulz [Fri, 7 Dec 2012 10:22:18 +0000 (11:22 +0100)]
QtBase: Remove linguist example which was already moved
... to QtTools.
Change-Id: I707d8debcf35b01046b78718fd4b48c03b1fa6e2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Joerg Bornemann [Thu, 6 Dec 2012 15:29:30 +0000 (16:29 +0100)]
support include paths for the Windows resource compiler
In RC_INCLUDEPATH one can add include paths for the Windows resource
compiler.
Task-number: QTBUG-13776
Change-Id: If1d9ed44097adb7789df03e4ccd4e3b7df9e8d08
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Joerg Bornemann [Thu, 6 Dec 2012 14:02:59 +0000 (15:02 +0100)]
qmake: fix extra compilers in vcxprojs for single config mode
In single config mode extra compilers were not written to Visual
Studio project files, because they were not added to the fake project
object we're using to write a single config project.
Task-number: QTBUG-27505
Change-Id: Ie57b648861573496252f1383dc77e0729e244947
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Christian Stenger [Thu, 6 Dec 2012 15:40:55 +0000 (16:40 +0100)]
Doc: Updated outdated docs to use new macro
Change-Id: I9a3528112fba1db988592d9f4f470ec678e81e1a
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Miikka Heikkinen [Fri, 7 Dec 2012 07:54:43 +0000 (09:54 +0200)]
Only handle QTPLUGIN when linking against static Qt
Usage of QTPLUGIN implies static Qt, so only handle it when that is
true so user projects do not need to scope it if they support linking
against both static and shared Qt.
Change-Id: I011b4672bac122d7d64d8f2fc0e41ca7e5251dfc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Miikka Heikkinen [Fri, 7 Dec 2012 09:46:43 +0000 (11:46 +0200)]
Fix module pri file name for static plugins
Since QTPLUGIN variable values are used to locate both the plugin
library and the module pri file, those must match. Therefore generate
module pri file name using the TARGET of the plugin rather than the
pro file name.
Change-Id: I9ec6f2a087ba3b3cecf7034c8a28b31df155cd97
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Oswald Buddenhagen [Thu, 6 Dec 2012 15:29:21 +0000 (16:29 +0100)]
move cmake template files under features/data/
there will be more template data, and it wouldn't be too nice
to spread it all over mkspecs/.
Change-Id: I909c48d26ac34f8c0f66051a65d326366d49c096
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Oswald Buddenhagen [Thu, 6 Dec 2012 14:35:19 +0000 (15:35 +0100)]
simplify code by using new $$absolute_path() function
Change-Id: Ie8102eea5c2b108154b76ed35bdbc6d8572bd4a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Oswald Buddenhagen [Thu, 6 Dec 2012 14:38:46 +0000 (15:38 +0100)]
finish the job of removing uic3 support
this should have been in
048b697c07.
Change-Id: I8589453ef937db1a9a446b0e5d01bb830b0cf6b0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Oswald Buddenhagen [Thu, 6 Dec 2012 13:15:14 +0000 (14:15 +0100)]
remove another dead assignment
Change-Id: I79ffdba571b48def4494b018b2a2abdee8aab0a8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Morten Johan Sorvig [Mon, 22 Oct 2012 08:41:28 +0000 (10:41 +0200)]
Implement Cocoa KeyMapper.
Port Qt 4 implementation. Shortcuts such as shift-5
should now work.
Change-Id: I1d8c4c6c4a903142361996b558ee31c8549fcef6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Stephen Kelly [Fri, 7 Dec 2012 09:15:36 +0000 (10:15 +0100)]
Only generate -fPIE on unix.
This follows the same logic used to set bsymbolic_functions.
Change-Id: I9300eab8a1b6673c4409b5dd07b40123fdf00d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Stephen Kelly [Fri, 7 Dec 2012 09:13:24 +0000 (10:13 +0100)]
Topologically sort $${MODULE}.depends when generating cmake files.
The contents of this eventually go into a CMake target
property IMPORTED_LINK_INTERFACE_LIBRARIES, which seems to expect
sorted input. Usually the contents is generated by CMake itself,
so generating content it expects is reasonable.
This fixes the qtactiveqt cmake unit test with MingW on linux.
Change-Id: I2a540bea5c3ac214ad4e1dfedfb7cbd2f863472b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nico Vertriest [Fri, 7 Dec 2012 11:04:29 +0000 (12:04 +0100)]
Doc: removed control code+minor rephrasing
QTBUG-28382
Change-Id: Ic166fcb283d3339853c68a71be9aebd6cfed0523
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Morten Johan Sorvig [Tue, 4 Dec 2012 16:02:59 +0000 (17:02 +0100)]
Set CGImage format when converting from QImage.
Set the CGImage format based on QImage::format().
Handle8-bit per component (A)RGB.
Change-Id: I041b0ee53d3943a0aaf9e813eb0a235c4de619dd
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Morten Johan Sorvig [Tue, 4 Dec 2012 14:26:02 +0000 (15:26 +0100)]
Use the "copy" blend mode for backingstore drawing
The default is a "source over", but we want to
completely replace the destination pixels. (Which
is slightly faster).
Change-Id: I4916765258a2236f70f58a8e20b06f80739183c1
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Morten Johan Sorvig [Tue, 4 Dec 2012 14:19:27 +0000 (15:19 +0100)]
Avoid backing store color space conversions.
We want the Qt backing store to be in the device color
space by default. This will avoid colour space conversions
when blitting it to screen, at the cost of a potential
loss in color accuracy.
As it turns out, CGColorSpaceCreateDeviceRGB no longer
crates a device color space but rather a generic color
space. (Since 10.4). Create the color space with a system
profile instead.
Accurate color representation needs to be supported
at some point, but this fast path should be the
default.
Change-Id: I7ebb77b36f81f66119d8c2ef464723401ec1d1e8
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Nico Vertriest [Wed, 5 Dec 2012 13:55:31 +0000 (14:55 +0100)]
Deleted wrong statement about nr Qt JSON classes
Change-Id: I58d8ab73d3018d9712ec9485e0b8e52a5a75da5e
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Morten Johan Sorvig [Thu, 6 Dec 2012 16:46:07 +0000 (17:46 +0100)]
Update QNSView geometry on window resize.
Ideally this should not be required since NSWindow
should resize the content view automatically. However,
in the case of modal QDialogs this does not happen.
Add call to updateGeometry in windowDidResize as a
workaround, and remove code which called QNSView::setFrameSize
with the current size.
This will cause duplicate handleGeometryChange calls
in the non-qdialog case, add a test to see if the geometry
really has changed to prevent that.
Change-Id: I29bea23b2ab72f923aeadf8db8cb9131ae177a28
Reviewed-by: Liang Qi <liang.qi@digia.com>
Volker Krause [Wed, 5 Dec 2012 10:42:58 +0000 (11:42 +0100)]
Compile with QT_NO_CURSOR.
Mostly straightforward, the a11y changes might look a bit drastic, but the
base class QAccessibleTextWidget was already disabled in this case, so we
have to obviously take out its sub-classes as well.
Change-Id: I682ace20d6938688ddb1da23c3463f3c025fab8e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Laszlo Papp [Thu, 6 Dec 2012 23:02:00 +0000 (23:02 +0000)]
Make the documentation more explicit an talkative
Change-Id: Ifa4b7c3c5f8ec384addbb80a9436d55b32d8bc51
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
David Gil [Thu, 6 Dec 2012 22:28:40 +0000 (23:28 +0100)]
Fix typos and style in QToolBar documentation
Change-Id: Ic4b4e18746382bae1b6dae009e1e5663c7a21a84
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Sergio Ahumada [Thu, 6 Dec 2012 19:48:00 +0000 (20:48 +0100)]
doc: Remove documentation for removed TRUE and FALSE macros
These macros were removed by
158f39ec7870c54ff3a15f72fe151062d6daa172
Change-Id: I2aabef1dd2c9cb3949040c167a4e5cf1a9390ba6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Samuel Rødal [Wed, 5 Dec 2012 16:38:58 +0000 (17:38 +0100)]
Removed requestOrientation() API from QWindow.
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>