Stefan Roese [Fri, 1 Jun 2007 13:15:12 +0000 (15:15 +0200)]
NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
This patch adds hardware ECC support to the NDFC driver. It also
changes the register access from using the "simple" in32/out32
functions to the in_be32/out_be32 functions, which make sure
that the access is correctly synced. This is the only recommended
access to SoC registers in the current Linux kernel.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:12:15 +0000 (15:12 +0200)]
NAND: Update nand_ecc.c to latest Linux version
This patch updates the nand_ecc code to the latest Linux version.
The main reason for this is the more compact code. This makes
it possible to include the ECC code into the NAND bootloader
image (NAND_SPL) for PPC4xx.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 13:09:50 +0000 (15:09 +0200)]
ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 11:45:24 +0000 (13:45 +0200)]
ppc4xx: Change Luan config file to support ECC
With the updated 44x DDR2 driver the Luan board now supports
ECC generation and checking.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 1 Jun 2007 11:45:00 +0000 (13:45 +0200)]
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
Add config option for 180 degree advance clock control as needed
for the AMCC Luan eval board.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Thu, 31 May 2007 15:21:22 +0000 (17:21 +0200)]
Merge with /home/wd/git/u-boot/stx-gp3ssa
Wolfgang Denk [Thu, 31 May 2007 15:20:09 +0000 (17:20 +0200)]
Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 27 May 2007 23:11:11 +0000 (01:11 +0200)]
Merge with /home/tur/git/u-boot#motionpro
Bartlomiej Sieka [Sun, 27 May 2007 15:26:46 +0000 (17:26 +0200)]
Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:06:36 +0000 (17:06 +0200)]
Motion-PRO: Add support for redundant environment.
Enable redundant environment, add a MTD partition for it; also add env.
variable command for passing MTD partitions to the kernel command line.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:05:11 +0000 (17:05 +0200)]
Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
Allow passing longer command line to the kernel - useful especially
for passing MTD partition layout.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:04:18 +0000 (17:04 +0200)]
Fix: Add missing NULL termination in strings expanded by macros parser.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 15:03:37 +0000 (17:03 +0200)]
Motion-PRO: Update EEPROM's page write bits and write delay.
Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
have a page write capability of two bytes", and "This device offers fast (1ms)
byte write". Add 3ms of extra delay.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:58:45 +0000 (16:58 +0200)]
MPC5XXX, Motion-PRO: Fix PHY initialization problem.
After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
networking does not function. This commit switches PHY to TX mode by clearing
the FX_SEL bit of Mode Control Register. It also reverses commit
008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:57:15 +0000 (16:57 +0200)]
Motion-PRO: Add support for the temperature sensor.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:55:23 +0000 (16:55 +0200)]
Motion-PRO: Add displaying of CPLD revision information during boot.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:53:43 +0000 (16:53 +0200)]
MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Bartlomiej Sieka [Sun, 27 May 2007 14:51:48 +0000 (16:51 +0200)]
Motion-PRO: Add LED support.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
Stefan Roese [Thu, 24 May 2007 07:50:17 +0000 (09:50 +0200)]
Merge with /home/stefan/git/u-boot/acadia-nand
Stefan Roese [Thu, 24 May 2007 07:49:00 +0000 (09:49 +0200)]
ppc4xx: Fix small 405EZ OCM initilization bug in start.S
As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
fixes a small bug in the 405EZ OCM initialization. Thanks for
spotting.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 24 May 2007 06:22:09 +0000 (08:22 +0200)]
ppc4xx: Update AMCC Acadia support for board revision 1.1
This patch updates the Acadia (405EZ) support for the new 1.1 board
revision. It also adds support for NAND FLASH via the 4xx NDFC.
Please note that the jumper J7 must be in position 2-3 for this
NAND support. Position 1-2 is for NAND booting only. NAND booting
support will follow later.
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Loeliger [Wed, 23 May 2007 19:09:46 +0000 (14:09 -0500)]
Add LIST_86xx MAKEALL target for PowerPC builds.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Stefan Roese [Tue, 22 May 2007 10:48:09 +0000 (12:48 +0200)]
ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 22 May 2007 10:46:10 +0000 (12:46 +0200)]
ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
This patch adds support for 405 PPC's to the 4xx NAND driver
ndfc.c. This is in preparation for the new AMCC 405EZ.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 21 May 2007 05:41:22 +0000 (07:41 +0200)]
ppc4xx: Fix problem in 405EZ OCM initialization
As spotted by Bruce Adler this patch fixes an initialization problem
for the 405EZ OCM.
Signed-off-by: Stefan Roese <sr@denx.de>
Gary Jennejohn [Fri, 18 May 2007 16:41:22 +0000 (17:41 +0100)]
Add support for the Siemens SMN42 board.
Peter Pearse [Fri, 18 May 2007 15:47:03 +0000 (16:47 +0100)]
Reduce line lengths to 80 characters max.
Peter Pearse [Fri, 18 May 2007 13:34:19 +0000 (14:34 +0100)]
Merge with git://www.denx.de/git/u-boot.git
Peter Pearse [Fri, 18 May 2007 13:34:07 +0000 (14:34 +0100)]
Makefile permissions
Peter Pearse [Fri, 18 May 2007 13:33:23 +0000 (14:33 +0100)]
Merge with git://www.denx.de/git/u-boot.git
Peter Pearse [Fri, 18 May 2007 13:33:11 +0000 (14:33 +0100)]
Makefile permissions
Stefan Roese [Fri, 18 May 2007 09:20:02 +0000 (11:20 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Kim Phillips [Wed, 16 May 2007 21:52:19 +0000 (16:52 -0500)]
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
For all practical u-boot purposes, TSECs don't differ throughout the
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Wolfgang Denk [Wed, 16 May 2007 22:06:11 +0000 (00:06 +0200)]
Merge with /home/git/u-boot
Stefano Babic [Wed, 16 May 2007 12:49:12 +0000 (14:49 +0200)]
Fix compile problem cause my Microblaze merge
Signed-off-by: Stefano Babic <sbabic@denx.de>
Jeffrey Mann [Wed, 16 May 2007 11:23:10 +0000 (13:23 +0200)]
[PATCH] Run new sequoia boards with an EBC speed of 83MHz
Because the Sequoia board does not boot with an EBC faster than 66MHz,
the clock divider are changed after the initial boot process.
This allows for maximum clocking speeds to be achieved on newer boards.
Sequoia boards with 666.66 MHz processors require that the EBC divider
be set to 3 in order to start the initial boot process at a slower EBC
speed. After the initial boot process, the divider can be set back to 2,
which will cause the boards to run at 83.333MHz. This is backward
compatible with boards with 533.33 MHz processors, as these boards will
already be set with an EBC divider of 2.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Wolfgang Denk [Tue, 15 May 2007 23:16:53 +0000 (01:16 +0200)]
Minor Coding Style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 May 2007 23:12:04 +0000 (01:12 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc83xx
Wolfgang Denk [Tue, 15 May 2007 22:13:33 +0000 (00:13 +0200)]
Coding Style Cleanup, new CHANGELOG
Wolfgang Denk [Tue, 15 May 2007 22:11:53 +0000 (00:11 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-microblaze
Wolfgang Denk [Tue, 15 May 2007 21:38:05 +0000 (23:38 +0200)]
Minor coding style cleanup.
mushtaq khan [Fri, 20 Apr 2007 08:53:02 +0000 (14:23 +0530)]
Add driver for S-ATA-controller on Intel processors with South
Bridge, ICH-5, ICH-6 and ICH-7.
Implementation:
1. Code is divided in to two files. All functions, which are
controller specific are kept in "drivers/ata_piix.c" file and
functions, which are not controller specific, are kept in
"common/cmd_sata.c" file.
2. Reading and Writing from the S-ATA drive is done using PIO method.
3. Driver can be configured for 48-bit addressing by defining macro
CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
addressing.
4. S-ATA read function is hooked to the File system, commands like
ext2ls and ext2load file can be used. This has been tested.
5. U-Boot command "SATA_init" is added, which initializes the S-ATA
controller and identifies the S-ATA drives connected to it.
6. U-Boot command "sata" is added, which is used to read/write, print
partition table and get info about the drives present. This I have
implemented in same way as "ide" command is implemented in U-Boot.
7. This driver is for S-ATA in native mode.
8. This driver does not support the Native command queuing and
Hot-plugging.
Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
mushtaq khan [Mon, 30 Apr 2007 10:27:22 +0000 (15:57 +0530)]
Fixes bug clearing the bss section for i386
Hi,
There is a bug in the code of clearing the bss section for processor
i386.(File: cpu/i386/start.S)
In the code, bss_start addr (starting addr of bss section) is put into
the register %eax, but the code which clears the bss section refers to
the addr pointed by %edi.
This patch fixes this bug by putting bss_start into %edi register.
Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
Joe Hamman [Mon, 30 Apr 2007 21:47:28 +0000 (16:47 -0500)]
Add support for BCM5464 Quad Phy
Added support for Broadcom's BCM5464 Quad Phy
Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Zang Roy-r61911 [Wed, 9 May 2007 00:10:57 +0000 (08:10 +0800)]
Search the exception table with linear algorithm
Search the exception table with linear algorithm instead of
bisecting algorithm.
Because the exception table might be unsorted.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Aubrey.Li [Mon, 14 May 2007 03:47:35 +0000 (11:47 +0800)]
Fix compilation issues on MACOSX
Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
Stephen Williams [Tue, 15 May 2007 14:55:42 +0000 (07:55 -0700)]
Fix for compile of JSE target
The attached patch fixes the compile of the JSE board in the
denx git as of 14 may 2007. It is an extremely simple patch,
it just adds the missing define of CFG_SYSTEMACE_WIDTH.
Fix to compile JSE against
20070514 git of u-boot
Wolfgang Denk [Tue, 15 May 2007 20:12:06 +0000 (22:12 +0200)]
Merge with git://www.denx.de/git/u-boot-testing
Wolfgang Denk [Mon, 14 May 2007 22:23:53 +0000 (00:23 +0200)]
Merge with /home/wd/git/u-boot/master
Wolfgang Denk [Mon, 14 May 2007 22:22:30 +0000 (00:22 +0200)]
Merge with /home/tur/git/u-boot#motionpro
Stefan Roese [Fri, 11 May 2007 10:01:49 +0000 (12:01 +0200)]
ppc4xx: Add mtcpr/mfcpr access macros
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 11 May 2007 10:01:06 +0000 (12:01 +0200)]
ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Loeliger [Thu, 10 May 2007 18:54:08 +0000 (13:54 -0500)]
Merge branch 'mpc8641'
Piotr Kruszynski [Thu, 10 May 2007 14:55:52 +0000 (16:55 +0200)]
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
definition.
Peter Pearse [Wed, 9 May 2007 10:42:44 +0000 (11:42 +0100)]
Add the board directory for SMN42
Peter Pearse [Wed, 9 May 2007 10:41:58 +0000 (11:41 +0100)]
Add the files for the SMN42 board
Peter Pearse [Wed, 9 May 2007 10:40:34 +0000 (11:40 +0100)]
Remove the deleted files for the SMN42 patch
Peter Pearse [Wed, 9 May 2007 10:37:56 +0000 (11:37 +0100)]
New board SMN42 branch
Peter Pearse [Wed, 9 May 2007 09:24:38 +0000 (10:24 +0100)]
Makefile permissions
Ed Swarthout [Tue, 8 May 2007 19:17:07 +0000 (14:17 -0500)]
8641hpcn: Fix Makefile after moving pixis to board/freescale.
The OBJTREE != SRCTREE build scenario was broken.
This fixes it.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Michal Simek [Tue, 8 May 2007 13:57:43 +0000 (15:57 +0200)]
add: reading special purpose registers
Michal Simek [Tue, 8 May 2007 12:52:52 +0000 (14:52 +0200)]
add: Microblaze V5 exception handling
Michal Simek [Tue, 8 May 2007 12:39:11 +0000 (14:39 +0200)]
add: FSL control read and write
Piotr Kruszynski [Tue, 8 May 2007 11:05:44 +0000 (13:05 +0200)]
[Motion-PRO] Add support for I2C, EEPROM and RTC.
Bartlomiej Sieka [Tue, 8 May 2007 08:23:56 +0000 (10:23 +0200)]
[Motion-PRO] Add ATA support. Add CF-booting commands to the default
environment.
Bartlomiej Sieka [Tue, 8 May 2007 07:39:12 +0000 (09:39 +0200)]
[Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
eliminates networking problems in Linux (timeouts).
Bartlomiej Sieka [Tue, 8 May 2007 07:21:57 +0000 (09:21 +0200)]
[Motion-PRO] Enable Flat Device Tree support and modify default environment
to allow booting of FDT-expecting kernels.
Michal Simek [Mon, 7 May 2007 22:32:35 +0000 (00:32 +0200)]
Merge git://www.denx.de/git/u-boot
Conflicts:
include/asm-microblaze/microblaze_intc.h
include/linux/stat.h
Michal Simek [Mon, 7 May 2007 21:58:31 +0000 (23:58 +0200)]
new: USE_MSR_INTR support
Bartlomiej Sieka [Mon, 7 May 2007 20:36:15 +0000 (22:36 +0200)]
[MPC5xxx] There are networking problems on the Motion-PRO board with
current PHY initalization code (tftp timeouts all the time). This commit
temporarily disables PHY initalization sequence to make the networking
operational, until a fix is found.
Wolfgang Denk [Mon, 7 May 2007 20:10:36 +0000 (22:10 +0200)]
Get rid of duplicated file (see include/configs/sbc8560.h instead)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 7 May 2007 20:07:08 +0000 (22:07 +0200)]
Get rid of duplicated file (see doc/README.SBC8560 instead)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Michal Simek [Mon, 7 May 2007 17:43:10 +0000 (19:43 +0200)]
fix: read and write MSR - repair number of parameters
Jeffrey Mann [Mon, 7 May 2007 17:42:49 +0000 (19:42 +0200)]
[PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
A '3' got cut off in the formatting of the last patch to automatically
change the clock speed of the system clock on sequoia board.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Michal Simek [Mon, 7 May 2007 17:33:51 +0000 (19:33 +0200)]
new: fsl interrupt support
FSL_Has_data is connected to INTC.
Michal Simek [Mon, 7 May 2007 17:30:12 +0000 (19:30 +0200)]
fix: interrupt handler
remove asm code
Michal Simek [Mon, 7 May 2007 17:25:08 +0000 (19:25 +0200)]
fix: remove asm code
Michal Simek [Mon, 7 May 2007 17:12:43 +0000 (19:12 +0200)]
fix: clean interrupt
Michal Simek [Mon, 7 May 2007 15:22:25 +0000 (17:22 +0200)]
fix: interrupt handler for multiple sources
Michal Simek [Mon, 7 May 2007 15:11:09 +0000 (17:11 +0200)]
new: add writing to msr register
Wolfgang Denk [Sat, 5 May 2007 19:44:47 +0000 (21:44 +0200)]
Merge with /home/git/u-boot
Timur Tabi [Sat, 5 May 2007 06:12:30 +0000 (08:12 +0200)]
5xxx: write MAC address to mac-address and local-mac-address
Some device trees have a mac-address property, some have local-mac-address,
and some have both. To support all of these device trees, ftp_cpu_setup()
should write the MAC address to mac-address and local-mac-address, if they
exist.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Grzegorz Wianecki [Sun, 29 Apr 2007 12:01:54 +0000 (14:01 +0200)]
[PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
message. Use PVR to distinguish between the two variants, and print proper CPU
information.
Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Ladislav Michl [Wed, 25 Apr 2007 14:01:26 +0000 (16:01 +0200)]
[PATCH] simplify silent console
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Stefan Roese <sr@denx.de>
Sergei Shtylyov [Mon, 23 Apr 2007 13:30:39 +0000 (15:30 +0200)]
[PATCH] Avoid assigning PCI resources from zero address
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
core complains and IDE drivers fails to work. Also, assigning zero to a BAR
was illegal according to PCI 2.1 (the later revisions seem to have excluded the
sentence about "0" being considered an invalid address) -- so, use a reasonable
starting value of 0x1000 (that's what the most Linux archs are using).
Alternatively, one might have fixed the calls to pci_set_region() individually
(some code even seems to have taken care of this issue) but that would have
been a lot more work. :-)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Stefan Roese <sr@denx.de>
Jeffrey Mann [Mon, 23 Apr 2007 12:00:11 +0000 (14:00 +0200)]
[patch] setenv(...) can delete environmentalvariables
update setenv() function so that entering a NULL value for the
variable's value will delete the environmental variable
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Acked-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Mon, 23 Apr 2007 11:54:24 +0000 (13:54 +0200)]
[patch] use unsigned char in smc91111 driver for mac
the v_mac variable in the smc91111 driver is declared as a signed char ...
this causes problems when one of the bytes in the MAC is "signed" like 0xE0
because when it gets printed out, you get a display like:
0xFFFFFFE0 and that's no good
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Sat, 5 May 2007 19:12:41 +0000 (21:12 +0200)]
Merge with git://www.denx.de/git/u-boot-testing
Michal Simek [Sat, 5 May 2007 16:54:42 +0000 (18:54 +0200)]
new: FSL and MSR support #2
Michal Simek [Sat, 5 May 2007 16:27:16 +0000 (18:27 +0200)]
new: FSL and MSR support
Wolfgang Denk [Sat, 5 May 2007 16:23:11 +0000 (18:23 +0200)]
Coding stylke cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 5 May 2007 16:07:10 +0000 (18:07 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Wolfgang Denk [Sat, 5 May 2007 16:05:02 +0000 (18:05 +0200)]
Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 5 May 2007 15:33:22 +0000 (17:33 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc85xx
Wolfgang Denk [Sat, 5 May 2007 15:15:50 +0000 (17:15 +0200)]
Make "file" command happy with some config.mk files; update CHANGELOG
Wolfgang Denk [Sat, 5 May 2007 14:57:46 +0000 (16:57 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-nand-flash
Wolfgang Denk [Sat, 5 May 2007 14:48:48 +0000 (16:48 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc86xx
Stefan Roese [Sat, 5 May 2007 06:37:54 +0000 (08:37 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Jeffrey Mann [Sat, 5 May 2007 06:32:14 +0000 (08:32 +0200)]
ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
The AMCC Secquoia board has been changed in a new revision from using a
33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
indicates the difference. This patch reads that bit and uses the correct
clock speed for the board. This code is backward compatable will all
prior boards. All prior boards will be read as 33.000.
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 5 May 2007 06:29:01 +0000 (08:29 +0200)]
ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
for the 4k NAND boot image so define bus_frequency to 133MHz here
which is save for the refresh counter setup.
Signed-off-by: Stefan Roese <sr@denx.de>