net/mlx5e: Ensure that IPsec sequence packet number starts from 1

[ Upstream commit 3d42c8cc67a8fcbff0181f9ed6d03d353edcee07 ]

According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.

However if user didn't set seq/oseq, the HW used zero as first sequence
packet number. Such misconfiguration causes to drop of first packet
if replay window protection was enabled in SA.

To fix it, set sequence number to be at least 1.

Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Honor user choice of IPsec replay window size

[ Upstream commit a5e400a985df8041ed4659ed1462aa9134318130 ]

Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.

Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: lenovo: Restrict detection of patched firmware only to USB cptkbd

[ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ]

Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.

Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix refcount underflow from error handling race

[ Upstream commit 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 ]

If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL
server or fileserver), an asynchronous probe to one of its addresses may
fail immediately because sendmsg() returns an error.  When this happens, a
refcount underflow can happen if certain events hit a very small window.

The way this occurs is:

 (1) There are two levels of "call" object, the afs_call and the
     rxrpc_call.  Each of them can be transitioned to a "completed" state
     in the event of success or failure.

 (2) Asynchronous afs_calls are self-referential whilst they are active to
     prevent them from evaporating when they're not being processed.  This
     reference is disposed of when the afs_call is completed.

     Note that an afs_call may only be completed once; once completed
     completing it again will do nothing.

 (3) When a call transmission is made, the app-side rxrpc code queues a Tx
     buffer for the rxrpc I/O thread to transmit.  The I/O thread invokes
     sendmsg() to transmit it - and in the case of failure, it transitions
     the rxrpc_call to the completed state.

 (4) When an rxrpc_call is completed, the app layer is notified.  In this
     case, the app is kafs and it schedules a work item to process events
     pertaining to an afs_call.

 (5) When the afs_call event processor is run, it goes down through the
     RPC-specific handler to afs_extract_data() to retrieve data from rxrpc
     - and, in this case, it picks up the error from the rxrpc_call and
     returns it.

     The error is then propagated to the afs_call and that is completed
     too.  At this point the self-reference is released.

 (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the
     window between rxrpc_send_data() queuing the request packet and
     checking for call completion on the way out, then
     rxrpc_kernel_send_data() will return the error from sendmsg() to the
     app.

 (7) Then afs_make_call() will see an error and will jump to the error
     handling path which will attempt to clean up the afs_call.

 (8) The problem comes when the error handling path in afs_make_call()
     tries to unconditionally drop an async afs_call's self-reference.
     This self-reference, however, may already have been dropped by
     afs_extract_data() completing the afs_call

 (9) The refcount underflows when we return to afs_do_probe_vlserver() and
     that tries to drop its reference on the afs_call.

Fix this by making afs_make_call() attempt to complete the afs_call rather
than unconditionally putting it.  That way, if afs_extract_data() manages
to complete the call first, afs_make_call() won't do anything.

The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and
sticking an msleep() in rxrpc_send_data() after the 'success:' label to
widen the race window.

The error message looks something like:

    refcount_t: underflow; use-after-free.
    WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
    ...
    RIP: 0010:refcount_warn_saturate+0xba/0x110
    ...
    afs_put_call+0x1dc/0x1f0 [kafs]
    afs_fs_get_capabilities+0x8b/0xe0 [kafs]
    afs_fs_probe_fileserver+0x188/0x1e0 [kafs]
    afs_lookup_server+0x3bf/0x3f0 [kafs]
    afs_alloc_server_list+0x130/0x2e0 [kafs]
    afs_create_volume+0x162/0x400 [kafs]
    afs_get_tree+0x266/0x410 [kafs]
    vfs_get_tree+0x25/0xc0
    fc_mount+0xe/0x40
    afs_d_automount+0x1b3/0x390 [kafs]
    __traverse_mounts+0x8f/0x210
    step_into+0x340/0x760
    path_openat+0x13a/0x1260
    do_filp_open+0xaf/0x160
    do_sys_openat2+0xaf/0x170

or something like:

    refcount_t: underflow; use-after-free.
    ...
    RIP: 0010:refcount_warn_saturate+0x99/0xda
    ...
    afs_put_call+0x4a/0x175
    afs_send_vl_probes+0x108/0x172
    afs_select_vlserver+0xd6/0x311
    afs_do_cell_detect_alias+0x5e/0x1e9
    afs_cell_detect_alias+0x44/0x92
    afs_validate_fc+0x9d/0x134
    afs_get_tree+0x20/0x2e6
    vfs_get_tree+0x1d/0xc9
    fc_mount+0xe/0x33
    afs_d_automount+0x48/0x9d
    __traverse_mounts+0xe0/0x166
    step_into+0x140/0x274
    open_last_lookups+0x1c1/0x1df
    path_openat+0x138/0x1c3
    do_filp_open+0x55/0xb4
    do_sys_openat2+0x6c/0xb6

Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Bill MacAllister <bill@ca-zephyr.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Avoid physical KASLR on older Dell systems

[ Upstream commit 50d7cdf7a9b1ab6f4f74a69c84e974d5dc0c1bf1 ]

River reports boot hangs with v6.6 and v6.7, and the bisect points to
commit

  a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")

which moves the memory allocation and kernel decompression from the
legacy decompressor (which executes *after* ExitBootServices()) to the
EFI stub, using boot services for allocating the memory. The memory
allocation succeeds but the subsequent call to decompress_kernel() never
returns, resulting in a failed boot and a hanging system.

As it turns out, this issue only occurs when physical address
randomization (KASLR) is enabled, and given that this is a feature we
can live without (virtual KASLR is much more important), let's disable
the physical part of KASLR when booting on AMI UEFI firmware claiming to
implement revision v2.0 of the specification (which was released in
2006), as this is the version these systems advertise.

Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: fix memory leak in smb2_lock()

[ Upstream commit 8f1752723019db900fb60a5b9d0dfd3a2bdea36c ]

In smb2_lock(), if setup_async_work() executes successfully,
work->cancel_argv will bind the argv that generated by kmalloc(). And
release_async_work() is called in ksmbd_conn_try_dequeue_request() or
smb2_lock() to release argv.
However, when setup_async_work function fails, work->cancel_argv has not
been bound to the argv, resulting in the previously allocated argv not
being released. Call kfree() to fix it.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix warning in ext4_dio_write_end_io()

[ Upstream commit 619f75dae2cf117b1d07f27b046b9ffb071c4685 ]

The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.

Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com>
Fixes: 91562895f803 ("ext4: properly sync file size update after O_SYNC direct IO")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: add vendor/device ID pair for ASUS USB-C2500

[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ]

The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.

Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.

Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.6.7

Link: https://lore.kernel.org/r/20231211182045.784881756@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Restrict extended wait to PSP v13.0.6

[ Upstream commit 6fce23a4d8c5f93bf80b7f122449fbb97f1e40dd ]

Only PSPv13.0.6 SOCs take a longer time to reach steady state. Other
PSPv13 based SOCs don't need extended wait. Also, reduce PSPv13.0.6 wait
time.

Cc: stable@vger.kernel.org
Fixes: fc5988907156 ("drm/amdgpu: update retry times for psp vmbx wait")
Fixes: d8c1925ba8cd ("drm/amdgpu: update retry times for psp BL wait")
Link: https://lore.kernel.org/amd-gfx/34dd4c66-f7bf-44aa-af8f-c82889dd652c@amd.com/
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: update retry times for psp BL wait

[ Upstream commit d8c1925ba8cde2863297728a4c8fbf8fe766757a ]

Increase retry time for PSP BL wait, to compensate
for longer time to set c2pmsg 35 ready bit during
mode1 with RAS

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6fce23a4d8c5 ("drm/amdgpu: Restrict extended wait to PSP v13.0.6")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix refclk reporting for SMU v13.0.6

[ Upstream commit 6b7d211740da2c3a7656be8cbb36f32e6d9c6cbd ]

SMU v13.0.6 SOCs have 100MHz reference clock.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6fce23a4d8c5 ("drm/amdgpu: Restrict extended wait to PSP v13.0.6")
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Kconfig: Add select ARM_AMBA to SOC_STARFIVE

commit 78a03b9f8e6b317f7c65738a3fc60e1e85106a64 upstream.

Selects ARM_AMBA platform support for StarFive SoCs required by spi and
crypto dma engine.

Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Nam Cao <namcao@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-plugins: randstruct: Update code comment in relayout_struct()

commit d71f22365a9caca82d424f3a33445de46567e198 upstream.

Update code comment to clarify that the only element whose layout is
not randomized is a proper C99 flexible-array member. This update is
complementary to commit 1ee60356c2dc ("gcc-plugins: randstruct: Only
warn about true flexible arrays")

Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZWJr2MWDjXLHE8ap@work
Fixes: 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qcom: sc8280xp: Limit speaker digital volumes

commit 716d4e5373e9d1ae993485ab2e3b893bf7104fb1 upstream.

Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ johan: backport to 6.6; rename snd_soc_rtd_to_cpu() ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_set_pipapo: skip inactive elements during set walk

commit 317eb9685095678f2c9f5a8189de698c5354316a upstream.

Otherwise set elements can be deactivated twice which will cause a crash.

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Loongson64: Enable DMA noncoherent support

commit edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 upstream.

There are some Loongson64 systems come with broken coherent DMA
support, firmware will set a bit in boot_param and pass nocoherentio
in cmdline.

However nonconherent support was missed out when spin off Loongson-2EF
form Loongson64, and that boot_param change never made itself into
upstream.

Support DMA noncoherent properly to get those systems working.

Cc: stable@vger.kernel.org
Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Loongson64: Handle more memory types passed from firmware

commit c7206e7bd214ebb3ca6fa474a4423662327d9beb upstream.

There are many types of revsered memory passed from firmware
that should be reserved in memblock, and UMA memory passed
from firmware that should be added to system memory for system
to use.

Also for memblock there is no need to align those space into page,
which actually cause problems.

Handle them properly to prevent memory corruption on some systems.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Loongson64: Reserve vgabios memory on boot

commit 8f7aa77a463f47c9e00592d02747a9fcf2271543 upstream.

vgabios is passed from firmware to kernel on Loongson64 systems.
Sane firmware will keep this pointer in reserved memory space
passed from the firmware but insane firmware keeps it in low
memory before kernel entry that is not reserved.

Previously kernel won't try to allocate memory from low memory
before kernel entry on boot, but after converting to memblock
it will do that.

Fix by resversing those memory on early boot.

Cc: stable@vger.kernel.org
Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf metrics: Avoid segv if default metricgroup isn't set

commit e2b005d6ec0e738df584190e21d2c7ada37266a0 upstream.

A metric is default by having "Default" within its groups. The default
metricgroup name needn't be set and this can result in segv in
default_metricgroup_cmp and perf_stat__print_shadow_stats_metricgroup
that assume it has a value when there is a Default metric group. To
avoid the segv initialize the value to "".

Fixes: 1c0e47956a8e ("perf metrics: Sort the Default metricgroup")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: stable@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231204182330.654255-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback

commit b1693747487442984050eb0f462b83a3a8307525 upstream.

Json output didn't set the skip_duplicate_pmus callback yielding a
segfault.

Fixes: cd4e1efbbc40 ("perf pmus: Skip duplicate PMUs and don't print list suffix by default")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129213428.2227448-2-irogers@google.com
[namhyung: updated subject line according to Arnaldo]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Update EFER software model on CR0 trap for SEV-ES

commit 4cdf351d3630a640ab6a05721ef055b9df62277f upstream.

In general, activating long mode involves setting the EFER_LME bit in
the EFER register and then enabling the X86_CR0_PG bit in the CR0
register. At this point, the EFER_LMA bit will be set automatically by
hardware.

In the case of SVM/SEV guests where writes to CR0 are intercepted, it's
necessary for the host to set EFER_LMA on behalf of the guest since
hardware does not see the actual CR0 write.

In the case of SEV-ES guests where writes to CR0 are trapped instead of
intercepted, the hardware *does* see/record the write to CR0 before
exiting and passing the value on to the host, so as part of enabling
SEV-ES support commit f1c6366e3043 ("KVM: SVM: Add required changes to
support intercepts under SEV-ES") dropped special handling of the
EFER_LMA bit with the understanding that it would be set automatically.

However, since the guest never explicitly sets the EFER_LMA bit, the
host never becomes aware that it has been set. This becomes problematic
when userspace tries to get/set the EFER values via
KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host
will be missing the EFER_LMA bit, and when userspace attempts to pass
the EFER value back via KVM_SET_SREGS it will fail a sanity check that
asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME
are set.

Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG
and EFER_LME, regardless of whether or not SEV-ES is enabled.

Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210507165947.2502412-2-seanjc@google.com>
[A two year old patch that was revived after we noticed the failure in
 KVM_SET_SREGS and a similar patch was posted by Michael Roth.  This is
 Sean's patch, but with Michael's more complete commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390/mm: Properly reset no-dat

commit 27072b8e18a73ffeffb1c140939023915a35134b upstream.

When the CMMA state needs to be reset, the no-dat bit also needs to be
reset. Failure to do so could cause issues in the guest, since the
guest expects the bit to be cleared after a reset.

Cc: <stable@vger.kernel.org>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: kernel: Clear FPU states when setting up kernel threads

commit a58a173444a68412bb08849bd81c679395f20ca0 upstream.

io_uring sets up the io worker kernel thread via a syscall out of an
user space prrocess. This process might have used FPU and since
copy_thread() didn't clear FPU states for kernel threads a BUG()
is triggered for using FPU inside kernel. Move code around
to always clear FPU state for user and kernel threads.

Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurel32@debian.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix flushing, invalidation and file size with FICLONE

commit c54fc3a4f375663f2361a9cbb2955fb4ef912879 upstream.

Fix a number of issues in the cifs filesystem implementation of the FICLONE
ioctl in cifs_remap_file_range().  This is analogous to the previously
fixed bug in cifs_file_copychunk_range() and can share the helper
functions.

Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle.  We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.

Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.

Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet.  This can leaves the local
idea of the EOF at a later point than the server's EOF.  If a clone request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the clone source extends past
the server's EOF.

Fix this by:

 (0) Flush the source region (already done).  The flush does nothing and
     the EOF isn't moved if the source region has no dirty data.

 (1) Move the EOF to the end of the source region if it isn't already at
     least at this point.  If we can't do this, for instance if the server
     doesn't support it, just flush the entire source file.

 (2) Find the folio (if present) at each end of the range, flushing it and
     increasing the region-to-be-invalidated to cover those in their
     entirety.

 (3) Fully discard all the folios covering the range as we want them to be
     reloaded.

 (4) Then perform the extent duplication.

Thirdly, set i_size after doing the duplicate_extents operation as this
value may be used by various things internally.  stat() hides the issue
because setting ->time to 0 causes cifs_getatr() to revalidate the
attributes.

These were causing the cifs/001 xfstest to fail.

Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
cc: Christoph Hellwig <hch@lst.de>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix flushing, invalidation and file size with copy_file_range()

commit 7b2404a886f8b91250c31855d287e632123e1746 upstream.

Fix a number of issues in the cifs filesystem implementation of the
copy_file_range() syscall in cifs_file_copychunk_range().

Firstly, the invalidation of the destination range is handled incorrectly:
We shouldn't just invalidate the whole file as dirty data in the file may
get lost and we can't just call truncate_inode_pages_range() to invalidate
the destination range as that will erase parts of a partial folio at each
end whilst invalidating and discarding all the folios in the middle.  We
need to force all the folios covering the range to be reloaded, but we
mustn't lose dirty data in them that's not in the destination range.

Further, we shouldn't simply round out the range to PAGE_SIZE at each end
as cifs should move to support multipage folios.

Secondly, there's an issue whereby a write may have extended the file
locally, but not have been written back yet.  This can leaves the local
idea of the EOF at a later point than the server's EOF.  If a copy request
is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE
(which gets translated to -EIO locally) if the copy source extends past the
server's EOF.

Fix this by:

 (0) Flush the source region (already done).  The flush does nothing and
     the EOF isn't moved if the source region has no dirty data.

 (1) Move the EOF to the end of the source region if it isn't already at
     least at this point.  If we can't do this, for instance if the server
     doesn't support it, just flush the entire source file.

 (2) Find the folio (if present) at each end of the range, flushing it and
     increasing the region-to-be-invalidated to cover those in their
     entirety.

 (3) Fully discard all the folios covering the range as we want them to be
     reloaded.

 (4) Then perform the copy.

Thirdly, set i_size after doing the copychunk_range operation as this value
may be used by various things internally.  stat() hides the issue because
setting ->time to 0 causes cifs_getatr() to revalidate the attributes.

These were causing the generic/075 xfstest to fail.

Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: core: adjust uevent timing on gadget unbind

commit 73ea73affe8622bdf292de898da869d441da6a9d upstream.

The KOBJ_CHANGE uevent is sent before gadget unbind is actually
executed, resulting in inaccurate uevent emitted at incorrect timing
(the uevent would have USB_UDC_DRIVER variable set while it would
soon be removed).
Move the KOBJ_CHANGE uevent to the end of the unbind function so that
uevent is sent only after the change has been made.

Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ftrace: Fix stack teardown in ftrace_no_trace

commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream.

Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix
stack unwind") added use of a new stack frame on ftrace entry to fix
stack unwind. However, the commit missed updating the offset used while
tearing down the ftrace stack when ftrace is disabled. Fix the same.

In addition, the commit missed saving the correct stack pointer in
pt_regs. Update the same.

Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/CPU/AMD: Check vendor in the AMD microcode callback

commit 9b8493dc43044376716d789d07699f17d538a7c4 upstream.

Commit in Fixes added an AMD-specific microcode callback. However, it
didn't check the CPU vendor the kernel runs on explicitly.

The only reason the Zenbleed check in it didn't run on other x86 vendors
hardware was pure coincidental luck:

  if (!cpu_has_amd_erratum(c, amd_zenbleed))
  return;

gives true on other vendors because they don't have those families and
models.

However, with the removal of the cpu_has_amd_erratum() in

  05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function")

that coincidental condition is gone, leading to the zenbleed check
getting executed on other vendors too.

Add the explicit vendor check for the whole callback as it should've
been done in the first place.

Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devcoredump: Send uevent once devcd is ready

commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream.

dev_coredumpm() creates a devcoredump device and adds it
to the core kernel framework which eventually end up
sending uevent to the user space and later creates a
symbolic link to the failed device. An application
running in userspace may be interested in this symbolic
link to get the name of the failed device.

In a issue scenario, once uevent sent to the user space
it start reading '/sys/class/devcoredump/devcdX/failing_device'
to get the actual name of the device which might not been
created and it is in its path of creation.

To fix this, suppress sending uevent till the failing device
symbolic link gets created and send uevent once symbolic
link is created successfully.

Fixes: 833c95456a70 ("device coredump: add new device coredump class")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_omap: Add earlycon support for the AM654 UART controller

commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream.

Currently there is no support for earlycon on the AM654 UART
controller. This commit adds it.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream.

Starting RX DMA on THRI interrupt is too early because TX may not have
finished yet.

This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent
starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with
an AM62 SoC that is using the 8250 OMAP variant.

Cc: stable@vger.kernel.org
Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit

commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream.

This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX
interrupt after DMA enable") which unfortunately set the
UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never
cleared it.

Cc: stable@vger.kernel.org
Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: address RX timeout interrupt errata

commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream.

This device has a silicon bug that makes it report a timeout interrupt
but no data in the FIFO.

The datasheet states the following in the errata section 18.1.4:

  "If the host reads the receive FIFO at the same time as a
  time-out interrupt condition happens, the host might read 0xCC
  (time-out) in the Interrupt Indication Register (IIR), but bit 0
  of the Line Status Register (LSR) is not set (means there is no
  data in the receive FIFO)."

The errata description seems to indicate it concerns only polled mode of
operation when reading bit 0 of the LSR register. However, tests have
shown and NXP has confirmed that the RXLVL register also yields 0 when
the bug is triggered, and hence the IRQ driven implementation in this
driver is equally affected.

This bug has hit us on production units and when it does, sc16is7xx_irq()
would spin forever because sc16is7xx_port_irq() keeps seeing an
interrupt in the IIR register that is not cleared because the driver
does not call into sc16is7xx_handle_rx() unless the RXLVL register
reports at least one byte in the FIFO.

Fix this by always reading one byte from the FIFO when this condition
is detected in order to clear the interrupt. This approach was
confirmed to be correct by NXP through their support channels.

Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Signed-off-by: Daniel Mack <daniel@zonque.org>
Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: PL011: Fix DMA support

commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream.

Since there is no guarantee that the memory returned by
dma_alloc_coherent() is associated with a 'struct page', using the
architecture specific phys_to_page() is wrong, but using
virt_to_page() would be as well.

Stop using sg lists altogether and just use the *_single() functions
instead. This also simplifies the code a bit since the scatterlists in
this driver always have only one entry anyway.

https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/
    Use consistent names for dma buffers

gc: Add a commit log from the initial thread:
https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/
    Use consistent names for dma buffers

Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: class: fix typec_altmode_put_partner to put plugs

commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream.

When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.

typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb: client: fix potential NULL deref in parse_dfs_referrals()

commit 92414333eb375ed64f4ae92d34d579e826936480 upstream.

If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will
remain NULL and then parse_dfs_referrals() will dereference it.

Fix this by returning -EIO when no output data is returned.

Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to
return no data as per MS-SMB2 2.2.32.

Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"

commit 24be0b3c40594a14b65141ced486ae327398faf8 upstream.

This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac.

Enabling runtime pm as default for all AMD xHC 1.1 controllers caused
regression. An initial attempt to fix those was done in commit a5d6264b638e
("xhci: Enable RPM on controllers that support low-power states") but new
issues are still seen.

Revert this to get those AMD xHC 1.1 systems working

This patch went to stable an needs to be reverted from there as well.

Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1")
Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix non-availability of dedup breaking generic/304

commit 691a41d8da4b34fe72f09393505f55f28a8f34ec upstream.

Deduplication isn't supported on cifs, but cifs doesn't reject it, instead
treating it as extent duplication/cloning.  This can cause generic/304 to go
silly and run for hours on end.

Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in
->remap_file_range().

Note that it's unclear whether or not commit b073a08016a1 is meant to cause
cifs to return an error if REMAP_FILE_DEDUP.

Fixes: b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation")
Cc: stable@vger.kernel.org
Suggested-by: Dave Chinner <david@fromorbit.com>
cc: Xiaoli Feng <fengxiaoli0714@gmail.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Darrick Wong <darrick.wong@oracle.com>
cc: fstests@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parport: Add support for Brainboxes IX/UC/PX parallel cards

commit 1a031f6edc460e9562098bdedc3918da07c30a6e upstream.

Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157,
PX-203 and PX-475 (LPT port)

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: ma35d1: Validate console index before assignment

commit f0b9d97a77fa8f18400450713358303a435ab688 upstream.

The console is immediately assigned to the ma35d1 port without
checking its index. This oversight can lead to out-of-bounds
errors when the index falls outside the valid '0' to
MA35_UART_NR range. Such scenario trigges ran error like the
following:

 UBSAN: array-index-out-of-bounds in drivers/tty/serial/ma35d1_serial.c:555:51
 index -1 is out of range for type 'uart_ma35d1_port [17]

Check the index before using it and bail out with a warning.

Fixes: 930cbf92db01 ("tty: serial: Add Nuvoton ma35d1 serial driver support")
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Jacky Huang <ychuang3@nuvoton.com>
Cc: <stable@vger.kernel.org> # v6.5+
Link: https://lore.kernel.org/r/20231204163804.1331415-2-andi.shyti@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART

commit e92fad024929c79460403acf946bc9c09ce5c3a9 upstream.

Granite Rapids-D has an additional UART that is enumerated via ACPI.
Add ACPI ID for it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: Do not expect fixed layouts to grab a layout driver

commit b7c1e53751cb3990153084f31c41f25fde3b629c upstream.

Two series lived in parallel for some time, which led to this situation:
- The nvmem-layout container is used for dynamic layouts
- We now expect fixed layouts to also use the nvmem-layout container but
this does not require any additional driver, the support is built-in the
nvmem core.

Ensure we don't refuse to probe for wrong reasons.

Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*")
Cc: stable@vger.kernel.org
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231124193814.360552-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_hid: fix report descriptor allocation

commit 61890dc28f7d9e9aac8a9471302613824c22fae4 upstream.

The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs
cdev") has introduced a bug that leads to hid device corruption after
the replug operation.
Reverse device managed memory allocation for the report descriptor
to fix the issue.

Tested:
This change was tested on the AMD EthanolX CRB server with the BMC
based on the OpenBMC distribution. The BMC provides KVM functionality
via the USB gadget device:
- before: KVM page refresh results in a broken USB device,
- after: KVM page refresh works without any issues.

Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: consistent rcu api usage for kretprobe holder

commit d839a656d0f3caca9f96e9bf912fd394ac6a11bc upstream.

It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.

The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.

I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.

Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: ops: add correct range check for limiting volume

commit fb9ad24485087e0f00d84bee7a5914640b2b9024 upstream.

Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: sysfs: Fix error handling on failed export

[ Upstream commit 95dd1e34ff5bbee93a28ff3947eceaf6de811b1a ]

If gpio_set_transitory() fails, we should free the GPIO again. Most
notably, the flag FLAG_REQUESTED has previously been set in
gpiod_request_commit(), and should be reset on failure.

To my knowledge, this does not affect any current users, since the
gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted
to 0. However the gpio_set_transitory() function calles the .set_config()
function of the corresponding GPIO chip and there are some GPIO drivers in
which some (unlikely) branches return other values like -EPROBE_DEFER,
and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not
be reset, which results in the pin being blocked until the next reboot.

Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep")
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sev: Fix kernel crash due to late update to read-only ghcb_version

[ Upstream commit 27d25348d42161837be08fc63b04a2559d2e781c ]

A write-access violation page fault kernel crash was observed while running
cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was
observed during hotplug, after the CPU was offlined and the process
was migrated to different CPU. setup_ghcb() is called again which
tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this
is a read_only variable which is initialised during booting.

Trying to write it results in a pagefault:

  BUG: unable to handle page fault for address: ffffffffba556e70
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  [ ...]
  Call Trace:
   <TASK>
   ? __die_body.cold+0x1a/0x1f
   ? __die+0x2a/0x35
   ? page_fault_oops+0x10c/0x270
   ? setup_ghcb+0x71/0x100
   ? __x86_return_thunk+0x5/0x6
   ? search_exception_tables+0x60/0x70
   ? __x86_return_thunk+0x5/0x6
   ? fixup_exception+0x27/0x320
   ? kernelmode_fixup_or_oops+0xa2/0x120
   ? __bad_area_nosemaphore+0x16a/0x1b0
   ? kernel_exc_vmm_communication+0x60/0xb0
   ? bad_area_nosemaphore+0x16/0x20
   ? do_kern_addr_fault+0x7a/0x90
   ? exc_page_fault+0xbd/0x160
   ? asm_exc_page_fault+0x27/0x30
   ? setup_ghcb+0x71/0x100
   ? setup_ghcb+0xe/0x100
   cpu_init_exception_handling+0x1b9/0x1f0

The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase,
and it only needs to be done once in any case.

[ mingo: Refined the changelog. ]

Fixes: 95d33bfaa3e1 ("x86/sev: Register GHCB memory when SEV-SNP is active")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Fix perf_event_validate_size()

[ Upstream commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b ]

Budimir noted that perf_event_validate_size() only checks the size of
the newly added event, even though the sizes of all existing events
can also change due to not all events having the same read_format.

When we attach the new event, perf_group_attach(), we do re-compute
the size for all events.

Fixes: a723968c0ed3 ("perf: Fix u16 overflows")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: disable MCBP by default

[ Upstream commit d6a57588666301acd9d42d3b00d74240964f07f6 ]

Disable MCBP(mid command buffer preemption) by default as old Mesa
hangs with it. We shall not enable the feature that breaks old usermode
driver.

Fixes: 50a7c8765ca6 ("drm/amdgpu: enable mcbp by default on gfx9")
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt8183: kukui: Fix underscores in node names

[ Upstream commit 8980c30141d3986beab815d85762b9c67196ed72 ]

Replace underscores with hyphens in pinctrl node names both for consistency
and to adhere to the bindings.

Cc: stable@vger.kernel.org
Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node")
Fixes: 27eaf34df364 ("arm64: dts: mt8183: config dsi node")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231026191343.3345279-2-hsinyi@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: add missing space before {

[ Upstream commit a9c740c57f977deb41bc53c02d0dae3d0e2f191a ]

Add missing whitespace between node name/label and opening {.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230705150006.293690-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 8980c30141d3 ("arm64: dts: mt8183: kukui: Fix underscores in node names")
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Fix asm operand number out of range build error in bug table

[ Upstream commit 487635756198cad563feb47539c6a37ea57f1dae ]

Build is broken if CONFIG_DEBUG_BUGVERBOSE=n.
Fix it be using the correct asm operand number.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: fe76a1349f23 ("parisc: Use natural CPU alignment for bug_table")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Reduce size of the bug_table on 64-bit kernel by half

[ Upstream commit 43266838515d30dc0c45d5c7e6e7edacee6cce92 ]

Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 487635756198 ("parisc: Fix asm operand number out of range build error in bug table")
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: BPF: Don't sign extend function return value

[ Upstream commit 5d47ec2e6f4c64e30e392cfe9532df98c9beb106 ]

The `cls_redirect` test triggers a kernel panic like:

  # ./test_progs -t cls_redirect
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  [   30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c
  [   30.939331] Oops[#1]:
  [   30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
  [   30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
  [   30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0
  [   30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10
  [   30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90
  [   30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000
  [   30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000
  [   30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200
  [   30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0
  [   30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0
  [   30.941015]    ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590
  [   30.941535]   ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
  [   30.941696]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  [   30.942224]  PRMD: 00000004 (PPLV0 +PIE -PWE)
  [   30.942330]  EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
  [   30.942453]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  [   30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
  [   30.942764]  BADV: fffffffffd814de0
  [   30.942854]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
  [   30.942974] Modules linked in:
  [   30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76)
  [   30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000
  [   30.943495]         0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200
  [   30.943626]         0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668
  [   30.943785]         0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000
  [   30.943936]         900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70
  [   30.944091]         0000000000000000 0000000000000001 0000000731eeab00 0000000000000000
  [   30.944245]         ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8
  [   30.944402]         ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000
  [   30.944538]         000000000000005a 900000010504c200 900000010a064000 900000010a067000
  [   30.944697]         9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c
  [   30.944852]         ...
  [   30.944924] Call Trace:
  [   30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
  [   30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8
  [   30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684
  [   30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724
  [   30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c
  [   30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94
  [   30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158
  [   30.946492]
  [   30.946549] Code: 0015030e  5c0009c0  5001d000 <28c00304> 02c00484  29c00304  00150009  2a42d2e4  0280200d
  [   30.946793]
  [   30.946971] ---[ end trace 0000000000000000 ]---
  [   32.093225] Kernel panic - not syncing: Fatal exception in interrupt
  [   32.093526] Kernel relocated by 0x2320000
  [   32.093630]  .text @ 0x9000000002520000
  [   32.093725]  .data @ 0x9000000003400000
  [   32.093792]  .bss  @ 0x9000000004413200
  [   34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

This is because we signed-extend function return values. When subprog
mode is enabled, we have:

  cls_redirect()
    -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480

The pointer returned is later signed-extended to 0xfffffffffc00b480 at
`BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page
fault and a kernel panic.

Drop the unnecessary signed-extension on return values like other
architectures do.

With this change, we have:

  # ./test_progs -t cls_redirect
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  #51/1    cls_redirect/cls_redirect_inlined:OK
  #51/2    cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/3    cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/4    cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/5    cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/6    cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/7    cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/8    cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/9    cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/10   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/11   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/12   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/13   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/14   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/15   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51/16   cls_redirect/cls_redirect_subprogs:OK
  #51/17   cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/18   cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/19   cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/20   cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/21   cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/22   cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/23   cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/24   cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/25   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/26   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/27   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/28   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/29   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/30   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51/31   cls_redirect/cls_redirect_dynptr:OK
  #51/32   cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
  #51/33   cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
  #51/34   cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
  #51/35   cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
  #51/36   cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
  #51/37   cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
  #51/38   cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
  #51/39   cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
  #51/40   cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
  #51/41   cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
  #51/42   cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
  #51/43   cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
  #51/44   cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
  #51/45   cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
  #51      cls_redirect:OK
  Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: BPF: Don't sign extend memory load operand

[ Upstream commit fe5757553bf9ebe45ae8ecab5922f6937c8d8dfc ]

The `cgrp_local_storage` test triggers a kernel panic like:

  # ./test_progs -t cgrp_local_storage
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  [  550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00
  [  550.931781] Oops[#1]:
  [  550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
  [  550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
  [  550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0
  [  550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558
  [  550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118
  [  550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0
  [  550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020
  [  550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700
  [  550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8
  [  550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050
  [  550.933520]    ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200
  [  550.933911]   ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
  [  550.934105]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  [  550.934596]  PRMD: 00000004 (PPLV0 +PIE -PWE)
  [  550.934712]  EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
  [  550.934836]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  [  550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
  [  550.935097]  BADV: 0000000000000080
  [  550.935181]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
  [  550.935291] Modules linked in:
  [  550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55)
  [  550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001
  [  550.935844]         9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034
  [  550.935990]         0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09
  [  550.936175]         0000000000000001 0000000000000000 9000000108353ec0 0000000000000118
  [  550.936314]         9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000
  [  550.936479]         0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288
  [  550.936635]         00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003
  [  550.936779]         9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c
  [  550.936939]         0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0
  [  550.937083]         ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558
  [  550.937224]         ...
  [  550.937299] Call Trace:
  [  550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
  [  550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154
  [  550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200
  [  550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94
  [  550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158
  [  550.938477]
  [  550.938607] Code: 580009ae  50016000  262402e4 <28c20085> 14092084  03a00084  16000024  03240084  00150006
  [  550.938851]
  [  550.939021] ---[ end trace 0000000000000000 ]---

Further investigation shows that this panic is triggered by memory
load operations:

  ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0,
                             BPF_LOCAL_STORAGE_GET_F_CREATE);

The expression `task->cgroups->dfl_cgrp` involves two memory load.
Since the field offset fits in imm12 or imm14, we use ldd or ldptrd
instructions. But both instructions have the side effect that it will
signed-extended the imm operand. Finally, we got the wrong addresses
and panics is inevitable.

Use a generic ldxd instruction to avoid this kind of issues.

With this change, we have:

  # ./test_progs -t cgrp_local_storage
  Can't find bpf_testmod.ko kernel module: -2
  WARNING! Selftests relying on bpf_testmod.ko will be skipped.
  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  #48/1    cgrp_local_storage/tp_btf:OK
  test_attach_cgroup:PASS:skel_open 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
  test_attach_cgroup:FAIL:prog_attach unexpected error: -524
  #48/2    cgrp_local_storage/attach_cgroup:FAIL
  test_recursion:PASS:skel_open_and_load 0 nsec
  libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'on_lookup': failed to auto-attach: -524
  test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/3    cgrp_local_storage/recursion:FAIL
  #48/4    cgrp_local_storage/negative:OK
  #48/5    cgrp_local_storage/cgroup_iter_sleepable:OK
  test_yes_rcu_lock:PASS:skel_open 0 nsec
  test_yes_rcu_lock:PASS:skel_load 0 nsec
  libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
  test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/6    cgrp_local_storage/yes_rcu_lock:FAIL
  #48/7    cgrp_local_storage/no_rcu_lock:OK
  #48      cgrp_local_storage:FAIL

  All error logs:
  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  test_attach_cgroup:PASS:skel_open 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  test_attach_cgroup:PASS:prog_attach 0 nsec
  libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
  test_attach_cgroup:FAIL:prog_attach unexpected error: -524
  #48/2    cgrp_local_storage/attach_cgroup:FAIL
  test_recursion:PASS:skel_open_and_load 0 nsec
  libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'on_lookup': failed to auto-attach: -524
  test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/3    cgrp_local_storage/recursion:FAIL
  test_yes_rcu_lock:PASS:skel_open 0 nsec
  test_yes_rcu_lock:PASS:skel_load 0 nsec
  libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
  test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
  #48/6    cgrp_local_storage/yes_rcu_lock:FAIL
  #48      cgrp_local_storage:FAIL
  Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED

No panics any more (The test still failed because lack of BPF trampoline
which I am actively working on).

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields

[ Upstream commit 90fe70d4e23cb57253d2668a171d5695c332deb7 ]

AmpereOne metrics were missing DefaultMetricgroupName from metrics with
"Default" in group name resulting perf to segfault. Add the missing
field to address the issue.

Fixes: 59faeaf80d02 ("perf vendor events arm64: Fix for AmpereOne metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231201021550.1109196-2-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write

[ Upstream commit ee6236027218f8531916f1c5caa5dc330379f287 ]

Clang static analyzer complains that value stored to 'rets' is never
read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'.

Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: mei: client.c: return negative error code in mei_cl_write

[ Upstream commit 8f06aee8089cf42fd99a20184501bd1347ce61b9 ]

mei_msg_hdr_init() return negative error code, rets should be
'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'.

Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base

[ Upstream commit 862c135bde8bc185e8aae2110374175e6a1b6ed5 ]

In smb_reset_buffer, the sdb->buf_hw_base variable is uninitialized
before use, which initializes it in smb_init_data_buffer. And the SMB
regiester are set in smb_config_inport.
So move the call after smb_config_inport.

Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-4-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: ultrasoc-smb: Config SMB buffer before register sink

[ Upstream commit 830a7f54db102c889a3fe1c0a225f369ac05f07f ]

The SMB dirver register the enable/disable sysfs interface in function
smb_register_sink(), however the buffer depends on the following
configuration to work well. So it'll be possible for user to access an
unreset one.

Move the config buffer operation to before register_sink().
Ignore the return value, if smb_config_inport() fails. That will
cause the hardwares disable trace path to fail, should not affect
SMB driver remove. So we make smb_remove() return success,

Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-3-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb

[ Upstream commit b8411287aef4a994eff0c68f5597910c4194dfe3 ]

When we to enable the SMB by perf, the perf sched will call perf_ctx_lock()
to close system preempt in event_function_call(). But SMB::enable_smb() use
mutex to lock the critical section, which may sleep.

 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 153023, name: perf
 preempt_count: 2, expected: 0
 RCU nest depth: 0, expected: 0
 INFO: lockdep is turned off.
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
 softirqs last  enabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 CPU: 2 PID: 153023 Comm: perf Kdump: loaded Tainted: G   W  O   6.5.0-rc4+ #1

 Call trace:
 ...
  __mutex_lock+0xbc/0xa70
  mutex_lock_nested+0x34/0x48
  smb_update_buffer+0x58/0x360 [ultrasoc_smb]
  etm_event_stop+0x204/0x2d8 [coresight]
  etm_event_del+0x1c/0x30 [coresight]
  event_sched_out+0x17c/0x3b8
  group_sched_out.part.0+0x5c/0x208
  __perf_event_disable+0x15c/0x210
  event_function+0xe0/0x230
  remote_function+0xb4/0xe8
  generic_exec_single+0x160/0x268
  smp_call_function_single+0x20c/0x2a0
  event_function_call+0x20c/0x220
  _perf_event_disable+0x5c/0x90
  perf_event_for_each_child+0x58/0xc0
  _perf_ioctl+0x34c/0x1250
  perf_ioctl+0x64/0x98
 ...

Use spinlock to replace mutex to control driver data access to one at a
time. The function copy_to_user() may sleep, it cannot be in a spinlock
context, so we can't simply replace it in smb_read(). But we can ensure
that only one user gets the SMB device fd by smb_open(), so remove the
locks from smb_read() and buffer synchronization is guaranteed by the user.

Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-2-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwtracing: hisi_ptt: Add dummy callback pmu::read()

[ Upstream commit 55e0a2fb0cb5ab7c9c99c1ad4d3e6954de8b73a0 ]

When start trace with perf option "-C $cpu" and immediately stop it
with SIGTERM or others, the perf core will invoke pmu::read() while
the driver doesn't implement it. Add a dummy pmu::read() to avoid
any issues.

Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-6-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: Fix crash when Perf and sysfs modes are used concurrently

[ Upstream commit 287e82cf69aa264a52bc37591bd0eb407e20f85c ]

Partially revert the change in commit 6148652807ba ("coresight: Enable
and disable helper devices adjacent to the path") which changed the bare
call from source_ops(csdev)->enable() to coresight_enable_source() for
Perf sessions. It was missed that coresight_enable_source() is
specifically for the sysfs interface, rather than being a generic call.
This interferes with the sysfs reference counting to cause the following
crash:

  $ perf record -e cs_etm/@tmc_etr0/ -C 0 &
  $ echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink
  $ echo 1 > /sys/bus/coresight/devices/etm0/enable_source
  $ echo 0 > /sys/bus/coresight/devices/etm0/enable_source

  Unable to handle kernel NULL pointer dereference at virtual
  address 00000000000001d0
  Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
  ...
  Call trace:
   etm4_disable+0x54/0x150 [coresight_etm4x]
   coresight_disable_source+0x6c/0x98 [coresight]
   coresight_disable+0x74/0x1c0 [coresight]
   enable_source_store+0x88/0xa0 [coresight]
   dev_attr_store+0x20/0x40
   sysfs_kf_write+0x4c/0x68
   kernfs_fop_write_iter+0x120/0x1b8
   vfs_write+0x2dc/0x3b0
   ksys_write+0x70/0x108
   __arm64_sys_write+0x24/0x38
   invoke_syscall+0x50/0x128
   el0_svc_common.constprop.0+0x104/0x130
   do_el0_svc+0x40/0xb8
   el0_svc+0x2c/0xb8
   el0t_64_sync_handler+0xc0/0xc8
   el0t_64_sync+0x1a4/0x1a8
  Code: d53cd042 91002000 b9402a81 b8626800 (f940ead5)
  ---[ end trace 0000000000000000 ]---

This commit linked below also fixes the issue, but has unlocked updates
to the mode which could potentially race. So until we come up with a
more complete solution that takes all locking and interaction between
both modes into account, just revert back to the old behavior for Perf.

Reported-by: Junhao He <hejunhao3@huawei.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20230921132904.60996-1-hejunhao3@huawei.com/
Fixes: 6148652807ba ("coresight: Enable and disable helper devices adjacent to the path")
Tested-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231006131452.646721-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm4x: Remove bogous __exit annotation for some functions

[ Upstream commit 348ddab81f7b0983d9fb158df910254f08d3f887 ]

etm4_platform_driver (which lives in ".data" contains a reference to
etm4_remove_platform_dev(). So the latter must not be marked with __exit
which results in the function being discarded for a build with
CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer
contain invalid data.

etm4x_amba_driver referencing etm4_remove_amba() has the same issue.

Drop the __exit annotations for the two affected functions and a third
one that is called by the other two.

For reasons I don't understand this isn't catched by building with
CONFIG_DEBUG_SECTION_MISMATCH=y.

Fixes: c23bc382ef0e ("coresight: etm4x: Refactor probing routine")
Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/
Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt8186: Change gpu speedbin nvmem cell name

commit 59fa1e51ba54e1f513985a8177969b62973f7fd5 upstream.

MT8186's GPU speedbin value must be interpreted, or the value will not
be meaningful.
Use the correct "gpu-speedbin" nvmem cell name for the GPU speedbin to
allow triggering the cell info fixup handler, hence feeding the right
speedbin number to the users.

Cc: stable@vger.kernel.org
Fixes: 263d2fd02afc ("arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231005151150.355536-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8186: fix clock names for power domains

commit 9adf7580f6d498a5839e02fa1d1535e934364602 upstream.

Clocks for each power domain are split into big categories: pd clocks
and subsys clocks.
According to the binding, all clocks which have a dash '-' in their name
are treated as subsys clocks, and must be placed at the end of the list.
The other clocks which are pd clocks must come first.
Fixed the naming and the placing of all clocks in the power domains.
For the avoidance of doubt, prefixed all subsys clocks with the 'subsys'
prefix. The binding does not enforce strict clock names, the driver
uses them in bulk, only making a difference for pd clocks vs subsys clocks.

The above problem appears to be trivial, however, it leads to incorrect
power up and power down sequence of the power domains, because some
clocks will be mistakenly taken for subsys clocks and viceversa.
One consequence is the fact that if the DIS power domain goes power down
and power back up during the boot process, when it comes back up, there
are still transactions left on the bus which makes the display inoperable.

Some of the clocks for the DIS power domain were wrongly using '_' instead
of '-', which again made these clocks being treated as pd clocks instead of
subsys clocks.

Cc: stable@vger.kernel.org
Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc

commit 9dea1c724fc36643e83216c1f5a26613412150db upstream.

The NTC is defined as ntc@0 but it doesn't need any address at all.
Fix the unit_address_vs_reg warning by dropping the unit address: since
the node name has to be generic also fully rename it from ntc@0 to
thermal-sensor.

Cc: stable@vger.kernel.org
Fixes: ff9ea5c62279 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor")
Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8183: Move thermal-zones to the root node

commit 5a60d63439694590cd5ab1f998fc917ff7ba1c1d upstream.

The thermal zones are not a soc bus device: move it to the root
node to solve simple_bus_reg warnings.

Cc: stable@vger.kernel.org
Fixes: b325ce39785b ("arm64: dts: mt8183: add thermal zone node")
Link: https://lore.kernel.org/r/20231025093816.44327-9-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory

commit 19cba9a6c071db57888dc6b2ec1d9bf8996ea681 upstream.

The reserved memory for scp had node name "scp_mem_region" and also
without unit-address: change the name to "memory@(address)".
This fixes a unit_address_vs_reg warning.

Cc: stable@vger.kernel.org
Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node")
Link: https://lore.kernel.org/r/20231025093816.44327-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks

commit 61b94d54421a1f3670ddd5396ec70afe833e9405 upstream.

Before suspending the LARBs we're making sure that any operation is
done: this never happens because we are unexpectedly unclocking the
LARB20 before executing the suspend handler for the MediaTek Smart
Multimedia Interface (SMI) and the cause of this is incorrect clocks
on this LARB.

Fix this issue by changing the Local Arbiter 20 (used by the video
encoder secondary core) apb clock to CLK_VENC_CORE1_VENC;
furthermore, in order to make sure that both the PM resume and video
encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to
the VENC (main core) and VENC_CORE1 power domains, as this IP cannot
communicate with the rest of the system (the AP) without local
arbiter clocks being operational.

Cc: stable@vger.kernel.org
Fixes: 3b5838d1d82e ("arm64: dts: mt8195: Add iommu and smi nodes")
Fixes: 2b515194bf0c ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names

commit 24165c5dad7ba7c7624d05575a5e0cc851396c71 upstream.

Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators
by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0
and regulator-usb-p1.

Cc: stable@vger.kernel.org
Fixes: c0891284a74a ("arm64: dts: mediatek: add USB3 DRD driver")
Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7

commit 5943b8f7449df9881b273db07bdde1e7120dccf0 upstream.

Change interrupt cells to 2 to suppress interrupts_property warning.

Cc: stable@vger.kernel.org
Fixes: 0de0fe950f1b ("arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7")
Link: https://lore.kernel.org/r/20231127132026.165027-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties

commit 74543b303a9abfe4fa253d1fa215281baa05ff3a upstream.

dtbs_check throws a warning at the dsi node:
Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Other DTS have a panel child node with a reg, so the parent dtsi
must have the address-cells and size-cells, however this specific DT
has the panel removed, but not the cells, hence the warning above.

If panel is deleted then the cells must also be deleted since they are
tied together, as the child node in this DT does not have a reg.

Cc: stable@vger.kernel.org
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt7622: fix memory node warning check

commit 8e6ecbfd44b5542a7598c1c5fc9c6dcb5d367f2a upstream.

dtbs_check throws a warning at the memory node:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

fix by adding the address into the node name.

Cc: stable@vger.kernel.org
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mt7986: fix emmc hs400 mode without uboot initialization

commit 8dfe51c3f6ef31502fca3e2da8cd250ebbe4b8f2 upstream.

Eric reports errors on emmc with hs400 mode when booting linux on bpi-r3
without uboot [1]. Booting with uboot does not show this because clocks
seem to be initialized by uboot.

Fix this by adding assigned-clocks and assigned-clock-parents like it's
done in uboot [2].

[1] https://forum.banana-pi.org/t/bpi-r3-kernel-fails-setting-emmc-clock-to-416m-depends-on-u-boot/15170
[2] https://github.com/u-boot/u-boot/blob/master/arch/arm/dts/mt7986.dtsi#L287

Cc: stable@vger.kernel.org
Fixes: 513b49d19b34 ("arm64: dts: mt7986: add mmc related device nodes")
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mt7986: define 3W max power to both SFP on BPI-R3

commit 6413cbc17f89b3a160f3a6f3fad1232b1678fe40 upstream.

All SFP power supplies are connected to the system VDD33 which is 3v3/8A.
Set 3A per SFP slot to allow SFPs work which need more power than the
default 1W.

Cc: stable@vger.kernel.org
Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mt7986: change cooling trips

commit 1fcda8ceb014aafd56f10b33e0077c93b5dd45d1 upstream.

Add Critical and hot trips for emergency system shutdown and limiting
system load.

Change passive trip to active to make sure fan is activated on the
lowest trip.

Cc: stable@vger.kernel.org
Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones")
Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-4-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Skip some timing checks on BXT/GLK DSI transcoders

commit 20c2dbff342aec13bf93c2f6c951da198916a455 upstream.

Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.

Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/mst: Reject modes that require the bigjoiner

commit dd7eb65c493615fda7d459501c3d4a46e00ea5ba upstream.

We have no bigjoiner support in the MST code, so .mode_valid()
pretending otherwise is just going to result black screens for
users. Reject any mode that needs the joiner.

Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 9c058492b16f90bb772cb0dad567e8acc68e155d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/mst: Fix .mode_valid_ctx() return values

commit 7cf82b25dd91d7f330d9df2de868caca14289ba1 upstream.

.mode_valid_ctx() returns an errno, not the mode status. Fix
the code to do the right thing.

Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit c1799032d2ef6616113b733428dfaa2199a5604b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic-helpers: Invoke end_fb_access while owning plane state

commit e0f04e41e8eedd4e5a1275f2318df7e1841855f2 upstream.

Invoke drm_plane_helper_funcs.end_fb_access before
drm_atomic_helper_commit_hw_done(). The latter function hands over
ownership of the plane state to the following commit, which might
free it. Releasing resources in end_fb_access then operates on undefined
state. This bug has been observed with non-blocking commits when they
are being queued up quickly.

Here is an example stack trace from the bug report. The plane state has
been free'd already, so the pages for drm_gem_fb_vunmap() are gone.

Unable to handle kernel paging request at virtual address 0000000100000049
[...]
 drm_gem_fb_vunmap+0x18/0x74
 drm_gem_end_shadow_fb_access+0x1c/0x2c
 drm_atomic_helper_cleanup_planes+0x58/0xd8
 drm_atomic_helper_commit_tail+0x90/0xa0
 commit_tail+0x15c/0x188
 commit_work+0x14/0x20

Fix this by running end_fb_access immediately after updating all planes
in drm_atomic_helper_commit_planes(). The existing clean-up helper
drm_atomic_helper_cleanup_planes() now only handles cleanup_fb.

For aborted commits, roll back from drm_atomic_helper_prepare_planes()
in the new helper drm_atomic_helper_unprepare_planes(). This case is
different from regular cleanup, as we have to release the new state;
regular cleanup releases the old state. The new helper also invokes
cleanup_fb for all planes.

The changes mostly involve DRM's atomic helpers. Only two drivers, i915
and nouveau, implement their own commit function. Update them to invoke
drm_atomic_helper_unprepare_planes(). Drivers with custom commit_tail
function do not require changes.

v4:
* fix documentation (kernel test robot)
v3:
* add drm_atomic_helper_unprepare_planes() for rolling back
* use correct state for end_fb_access
v2:
* fix test in drm_atomic_helper_cleanup_planes()

Reported-by: Alyssa Ross <hi@alyssa.is>
Closes: https://lore.kernel.org/dri-devel/87leazm0ya.fsf@alyssa.is/
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Fixes: 94d879eaf7fb ("drm/atomic-helper: Add {begin,end}_fb_access to plane helpers")
Tested-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20231204083247.22006-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid6: use valid sector values to determine if an I/O should wait on the reshape

commit c467e97f079f0019870c314996fae952cc768e82 upstream.

During a reshape or a RAID6 array such as expanding by adding an additional
disk, I/Os to the region of the array which have not yet been reshaped can
stall indefinitely. This is from errors in the stripe_ahead_of_reshape
function causing md to think the I/O is to a region in the actively
undergoing the reshape.

stripe_ahead_of_reshape fails to account for the q disk having a sector
value of 0. By not excluding the q disk from the for loop, raid6 will always
generate a min_sector value of 0, causing a return value which stalls.

The function's max_sector calculation also uses min() when it should use
max(), causing the max_sector value to always be 0. During a backwards
rebuild this can cause the opposite problem where it allows I/O to advance
when it should wait.

Fixing these errors will allow safe I/O to advance in a timely manner and
delay only I/O which is unsafe due to stripes in the middle of undergoing
the reshape.

Fixes: 486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powercap: DTPM: Fix missing cpufreq_cpu_put() calls

commit bdefd9913bdd453991ef756b6f7176e8ad80d786 upstream.

The policy returned by cpufreq_cpu_get() has to be released with
the help of cpufreq_cpu_put() to balance its kobject reference counter
properly.

Add the missing calls to cpufreq_cpu_put() in the code.

Fixes: 0aea2e4ec2a2 ("powercap/dtpm_cpu: Reset per_cpu variable in the release function")
Fixes: 0e8f68d7f048 ("powercap/drivers/dtpm: Add CPU energy model based support")
Cc: v5.16+ <stable@vger.kernel.org> # v5.16+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: fix error handling in add_memory_resource()

commit f42ce5f087eb69e47294ababd2e7e6f88a82d308 upstream.

In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory().  However, creation of memory block
devices could fail.  In that case, arch_remove_memory() is called to
perform necessary cleanup.

Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling.  This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().

Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
  via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().

Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix oops when filemap_map_pmd() without prealloc_pte

commit 9aa1345d66b8132745ffb99b348b1492088da9e2 upstream.

syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().

The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?

My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.

The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).

Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: add missing mem_hotplug_lock

commit 001002e73712cdf6b8d9a103648cda3040ad7647 upstream.

From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).

mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.

When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0:      | CPU 1:
memory_offline()      |
-> offline_pages()      |
-> mem_hotplug_begin()      |
   ...      |
-> mem_hotplug_done()      |
     | kmemleak_scan()
     | -> get_online_mems()
     |    ...
-> mhp_deinit_memmap_on_memory()      |
  [not protected by mem_hotplug_begin/done()]|
  Marks memory section as offline,      |   Retrieves zone_start_pfn
  poisons vmemmap struct pages and updates   |   and struct page members.
  the zone related data      |
         |    ...
         | -> put_online_mems()

Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory().  Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.

online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.

Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/base/cpu: crash data showing should depends on KEXEC_CORE

commit 4e9e2e4c65136dfd32dd0afe555961433d1cf906 upstream.

After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs
attributes"), on x86_64, if only below kernel configs related to kdump are
set, compiling error are triggered.

----
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
------

------------------------------------------------------
drivers/base/cpu.c: In function `crash_hotplug_show':
drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration]
  309 |         return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support());
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~
      |                                        crash_hotplug_show
cc1: some warnings being treated as errors
------------------------------------------------------

CONFIG_KEXEC is used to enable kexec_load interface, the
crash_notes/crash_notes_size/crash_hotplug showing depends on
CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead.

Fix it now.

Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com
Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write

commit 187da0f8250aa94bd96266096aef6f694e0b4cd2 upstream.

The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping.  A pointer to the reserve map
is in vma->vm_private_data.  __vma_private_lock was checking the pointer
for NULL.  However, it is possible that the low bits of the pointer could
be used as flags.  In such instances, vm_private_data is not NULL and not
a valid pointer.  This results in the null-ptr-deref reported by syzbot:

general protection fault, probably for non-canonical address 0xdffffc000000001d:
 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
 <TASK>
 lock_acquire kernel/locking/lockdep.c:5753 [inline]
 lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
 down_write+0x93/0x200 kernel/locking/rwsem.c:1573
 hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
 hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
 __hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
 hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
 unmap_vmas+0x2f4/0x470 mm/memory.c:1733
 exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
 __mmput+0x12a/0x4d0 kernel/fork.c:1349
 mmput+0x62/0x70 kernel/fork.c:1371
 exit_mm kernel/exit.c:567 [inline]
 do_exit+0x9ad/0x2a20 kernel/exit.c:861
 __do_sys_exit kernel/exit.c:991 [inline]
 __se_sys_exit kernel/exit.c:989 [inline]
 __x64_sys_exit+0x42/0x50 kernel/exit.c:989
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Mask off low bit flags before checking for NULL pointer.  In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.

Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: Make sure that wq_unbound_cpumask is never empty

commit 4a6c5607d4502ccd1b15b57d57f17d12b6f257a7 upstream.

During boot, depending on how the housekeeping and workqueue.unbound_cpus
masks are set, wq_unbound_cpumask can end up empty. Since 8639ecebc9b1
("workqueue: Implement non-strict affinity scope for unbound workqueues"),
this may end up feeding -1 as a CPU number into scheduler leading to oopses.

  BUG: unable to handle page fault for address: ffffffff8305e9c0
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  ...
  Call Trace:
   <TASK>
   select_idle_sibling+0x79/0xaf0
   select_task_rq_fair+0x1cb/0x7b0
   try_to_wake_up+0x29c/0x5c0
   wake_up_process+0x19/0x20
   kick_pool+0x5e/0xb0
   __queue_work+0x119/0x430
   queue_work_on+0x29/0x30
  ...

An empty wq_unbound_cpumask is a clear misconfiguration and already
disallowed once system is booted up. Let's warn on and ignore
unbound_cpumask restrictions which lead to no unbound cpus. While at it,
also remove now unncessary empty check on wq_unbound_cpumask in
wq_select_unbound_cpu().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Tested-by: Yong He <alexyonghe@tencent.com>
Link: http://lkml.kernel.org/r/20231120121623.119780-1-alexyonghe@tencent.com
Fixes: 8639ecebc9b1 ("workqueue: Implement non-strict affinity scope for unbound workqueues")
Cc: stable@vger.kernel.org # v6.6+
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/surface: aggregator: fix recv_buf() return value

commit c8820c92caf0770bec976b01fa9e82bb993c5865 upstream.

Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.

This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().

Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: fix bogus error on regcache_sync success

commit fea88064445a59584460f7f67d102b6e5fc1ca1d upstream.

Since commit 0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:

[  228.794676] pcm512x 1-004c: Failed to sync cache: -22
[  228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22

This is caused by the cache check result leaking out into the
regcache_sync return value.

Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.

Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix rtl8125b PAUSE frames blasting when suspended

commit 4b0768b6556af56ee9b7cf4e68452a2b6289ae45 upstream.

When FIFO reaches near full state, device will issue pause frame.
If pause slot is enabled(set to 1), in this time, device will issue
pause frame only once. But if pause slot is disabled(set to 0), device
will keep sending pause frames until FIFO reaches near empty state.

When pause slot is disabled, if there is no one to handle receive
packets, device FIFO will reach near full state and keep sending
pause frames. That will impact entire local area network.

This issue can be reproduced in Chromebox (not Chromebook) in
developer mode running a test image (and v5.10 kernel):
1) ping -f $CHROMEBOX (from workstation on same local network)
2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX
3) ping $ROUTER (wait until ping fails from workstation)

Takes about ~20-30 seconds after step 2 for the local network to
stop working.

Fix this issue by enabling pause slot to only send pause frame once
when FIFO reaches near full state.

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: Move reference count in packet_sock to atomic_long_t

commit db3fadacaf0c817b222090290d06ca2a338422d0 upstream.

In some potential instances the reference count on struct packet_sock
could be saturated and cause overflows which gets the kernel a bit
confused. To prevent this, move to a 64-bit atomic reference count on
64-bit architectures to prevent the possibility of this type to overflow.

Because we can not handle saturation, using refcount_t is not possible
in this place. Maybe someday in the future if it changes it could be
used. Also, instead of using plain atomic64_t, use atomic_long_t instead.
32-bit machines tend to be memory-limited (i.e. anything that increases
a reference uses so much memory that you can't actually get to 2**32
references). 32-bit architectures also tend to have serious problems
with 64-bit atomics. Hence, atomic_long_t is the more natural solution.

Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: flower: fix for take a mutex lock in soft irq context and rcu lock

commit 0ad722bd9ee3a9bdfca9613148645e4c9b7f26cf upstream.

The neighbour event callback call the function nfp_tun_write_neigh,
this function will take a mutex lock and it is in soft irq context,
change the work queue to process the neighbour event.

Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock()
in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6.

Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: trigger: netdev: fix RTNL handling to prevent potential deadlock

commit fe2b1226656afae56702d1d84c6900f6b67df297 upstream.

When working on LED support for r8169 I got the following lockdep
warning. Easiest way to prevent this scenario seems to be to take
the RTNL lock before the trigger_data lock in set_device_name().

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc2-next-20231124+ #2 Not tainted
------------------------------------------------------
bash/383 is trying to acquire lock:
ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev]

but task is already holding lock:
ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9b/0xb50
       mutex_lock_nested+0x16/0x20
       rtnl_lock+0x12/0x20
       set_device_name+0xa9/0x120 [ledtrig_netdev]
       netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev]
       led_trigger_set+0x172/0x2c0
       led_trigger_write+0xf1/0x140
       sysfs_kf_bin_write+0x5d/0x80
       kernfs_fop_write_iter+0x15d/0x210
       vfs_write+0x1f0/0x510
       ksys_write+0x6c/0xf0
       __x64_sys_write+0x14/0x20
       do_syscall_64+0x3f/0xf0
       entry_SYSCALL_64_after_hwframe+0x6c/0x74

-> #0 (&trigger_data->lock){+.+.}-{3:3}:
       __lock_acquire+0x1459/0x25a0
       lock_acquire+0xc8/0x2d0
       __mutex_lock+0x9b/0xb50
       mutex_lock_nested+0x16/0x20
       netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
       call_netdevice_register_net_notifiers+0x5a/0x100
       register_netdevice_notifier+0x85/0x120
       netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
       led_trigger_set+0x172/0x2c0
       led_trigger_write+0xf1/0x140
       sysfs_kf_bin_write+0x5d/0x80
       kernfs_fop_write_iter+0x15d/0x210
       vfs_write+0x1f0/0x510
       ksys_write+0x6c/0xf0
       __x64_sys_write+0x14/0x20
       do_syscall_64+0x3f/0xf0
       entry_SYSCALL_64_after_hwframe+0x6c/0x74

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(&trigger_data->lock);
                               lock(rtnl_mutex);
  lock(&trigger_data->lock);

 *** DEADLOCK ***

8 locks held by bash/383:
 #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0
 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210
 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210
 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140
 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140
 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140
 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120
 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20

stack backtrace:
CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2
Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
Call Trace:
 <TASK>
 dump_stack_lvl+0x5c/0xd0
 dump_stack+0x10/0x20
 print_circular_bug+0x2dd/0x410
 check_noncircular+0x131/0x150
 __lock_acquire+0x1459/0x25a0
 lock_acquire+0xc8/0x2d0
 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 __mutex_lock+0x9b/0xb50
 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 ? __this_cpu_preempt_check+0x13/0x20
 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 ? __cancel_work_timer+0x11c/0x1b0
 ? __mutex_lock+0x123/0xb50
 mutex_lock_nested+0x16/0x20
 ? mutex_lock_nested+0x16/0x20
 netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 call_netdevice_register_net_notifiers+0x5a/0x100
 register_netdevice_notifier+0x85/0x120
 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
 led_trigger_set+0x172/0x2c0
 ? preempt_count_add+0x49/0xc0
 led_trigger_write+0xf1/0x140
 sysfs_kf_bin_write+0x5d/0x80
 kernfs_fop_write_iter+0x15d/0x210
 vfs_write+0x1f0/0x510
 ksys_write+0x6c/0xf0
 __x64_sys_write+0x14/0x20
 do_syscall_64+0x3f/0xf0
 entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f269055d034
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034
RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001
RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007
R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000
 </TASK>

Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix a possible race when disabling buffered events

commit c0591b1cccf708a47bc465c62436d669a4213323 upstream.

Function trace_buffered_event_disable() is responsible for freeing pages
backing buffered events and this process can run concurrently with
trace_event_buffer_lock_reserve().

The following race is currently possible:

* Function trace_buffered_event_disable() is called on CPU 0. It
  increments trace_buffered_event_cnt on each CPU and waits via
  synchronize_rcu() for each user of trace_buffered_event to complete.

* After synchronize_rcu() is finished, function
  trace_buffered_event_disable() has the exclusive access to
  trace_buffered_event. All counters trace_buffered_event_cnt are at 1
  and all pointers trace_buffered_event are still valid.

* At this point, on a different CPU 1, the execution reaches
  trace_event_buffer_lock_reserve(). The function calls
  preempt_disable_notrace() and only now enters an RCU read-side
  critical section. The function proceeds and reads a still valid
  pointer from trace_buffered_event[CPU1] into the local variable
  "entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1]
  which happens later.

* Function trace_buffered_event_disable() continues. It frees
  trace_buffered_event[CPU1] and decrements
  trace_buffered_event_cnt[CPU1] back to 0.

* Function trace_event_buffer_lock_reserve() continues. It reads and
  increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it
  believe that it can use the "entry" that it already obtained but the
  pointer is now invalid and any access results in a use-after-free.

Fix the problem by making a second synchronize_rcu() call after all
trace_buffered_event values are set to NULL. This waits on all potential
users in trace_event_buffer_lock_reserve() that still read a previous
pointer from trace_buffered_event.

Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix incomplete locking when disabling buffered events

commit 7fed14f7ac9cf5e38c693836fe4a874720141845 upstream.

The following warning appears when using buffered events:

[  203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420
[...]
[  203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G            E      6.7.0-rc2-default #4 56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a
[  203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017
[  203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420
[  203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff
[  203.735734] RSP: 0018:ffffb4ae4f7b7d80 EFLAGS: 00010202
[  203.735745] RAX: 0000000000000000 RBX: ffffb4ae4f7b7de0 RCX: ffff8ac10662c000
[  203.735754] RDX: ffff8ac0c750be00 RSI: ffff8ac10662c000 RDI: ffff8ac0c004d400
[  203.781832] RBP: ffff8ac0c039cea0 R08: 0000000000000000 R09: 0000000000000000
[  203.781839] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  203.781842] R13: ffff8ac10662c000 R14: ffff8ac0c004d400 R15: ffff8ac10662c008
[  203.781846] FS:  00007f4cd8a67740(0000) GS:ffff8ad798880000(0000) knlGS:0000000000000000
[  203.781851] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  203.781855] CR2: 0000559766a74028 CR3: 00000001804c4000 CR4: 00000000001506f0
[  203.781862] Call Trace:
[  203.781870]  <TASK>
[  203.851949]  trace_event_buffer_commit+0x1ea/0x250
[  203.851967]  trace_event_raw_event_sys_enter+0x83/0xe0
[  203.851983]  syscall_trace_enter.isra.0+0x182/0x1a0
[  203.851990]  do_syscall_64+0x3a/0xe0
[  203.852075]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  203.852090] RIP: 0033:0x7f4cd870fa77
[  203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48
[  203.982932] RSP: 002b:00007fff99717dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000089
[  203.982942] RAX: ffffffffffffffda RBX: 0000558ea1d7b6f0 RCX: 00007f4cd870fa77
[  203.982948] RDX: 0000000000000000 RSI: 00007fff99717de0 RDI: 0000558ea1d7b6f0
[  203.982957] RBP: 00007fff99717de0 R08: 00007fff997180e0 R09: 00007fff997180e0
[  203.982962] R10: 00007fff997180e0 R11: 0000000000000246 R12: 00007fff99717f40
[  204.049239] R13: 00007fff99718590 R14: 0000558e9f2127a8 R15: 00007fff997180b0
[  204.049256]  </TASK>

For instance, it can be triggered by running these two commands in
parallel:

 $ while true; do
    echo hist:key=id.syscall:val=hitcount > \
      /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger;
  done
 $ stress-ng --sysinfo $(nproc)

The warning indicates that the current ring_buffer_per_cpu is not in the
committing state. It happens because the active ring_buffer_event
doesn't actually come from the ring_buffer_per_cpu but is allocated from
trace_buffered_event.

The bug is in function trace_buffered_event_disable() where the
following normally happens:

* The code invokes disable_trace_buffered_event() via
  smp_call_function_many() and follows it by synchronize_rcu(). This
  increments the per-CPU variable trace_buffered_event_cnt on each
  target CPU and grants trace_buffered_event_disable() the exclusive
  access to the per-CPU variable trace_buffered_event.

* Maintenance is performed on trace_buffered_event, all per-CPU event
  buffers get freed.

* The code invokes enable_trace_buffered_event() via
  smp_call_function_many(). This decrements trace_buffered_event_cnt and
  releases the access to trace_buffered_event.

A problem is that smp_call_function_many() runs a given function on all
target CPUs except on the current one. The following can then occur:

* Task X executing trace_buffered_event_disable() runs on CPU 0.

* The control reaches synchronize_rcu() and the task gets rescheduled on
  another CPU 1.

* The RCU synchronization finishes. At this point,
  trace_buffered_event_disable() has the exclusive access to all
  trace_buffered_event variables except trace_buffered_event[CPU0]
  because trace_buffered_event_cnt[CPU0] is never incremented and if the
  buffer is currently unused, remains set to 0.

* A different task Y is scheduled on CPU 0 and hits a trace event. The
  code in trace_event_buffer_lock_reserve() sees that
  trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the
  buffer provided by trace_buffered_event[CPU0].

* Task X continues its execution in trace_buffered_event_disable(). The
  code incorrectly frees the event buffer pointed by
  trace_buffered_event[CPU0] and resets the variable to NULL.

* Task Y writes event data to the now freed buffer and later detects the
  created inconsistency.

The issue is observable since commit dea499781a11 ("tracing: Fix warning
in trace_buffered_event_disable()") which moved the call of
trace_buffered_event_disable() in __ftrace_event_enable_disable()
earlier, prior to invoking call->class->reg(.. TRACE_REG_UNREGISTER ..).
The underlying problem in trace_buffered_event_disable() is however
present since the original implementation in commit 0fc1b09ff1ff
("tracing: Use temp buffer when filtering events").

Fix the problem by replacing the two smp_call_function_many() calls with
on_each_cpu_mask() which invokes a given callback on all CPUs.

Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-2-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Fixes: dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Disable snapshot buffer when stopping instance tracers

commit b538bf7d0ec11ca49f536dfda742a5f6db90a798 upstream.

It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). When stopping a tracer in an
instance would not disable the snapshot buffer. This could have some
unintended consequences if the irqsoff tracer is enabled.

Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that
all instances behave the same. The tracing_start/stop() functions will
just call their respective tracing_start/stop_tr() with the global_array
passed in.

Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Stop current tracer when resizing buffer

commit d78ab792705c7be1b91243b2544d1a79406a2ad7 upstream.

When the ring buffer is being resized, it can cause side effects to the
running tracer. For instance, there's a race with irqsoff tracer that
swaps individual per cpu buffers between the main buffer and the snapshot
buffer. The resize operation modifies the main buffer and then the
snapshot buffer. If a swap happens in between those two operations it will
break the tracer.

Simply stop the running tracer before resizing the buffers and enable it
again when finished.

Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 3928a8a2d9808 ("ftrace: make work with new ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>