Kconfig: Drop CONFIG_CMD_IMX_FUSE

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_IMXOTP

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IMMAP to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IMMAP

Also move this command out of the cmd/ directory since it is
PowerPC-specific.

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Add a CONFIG_IDE option

At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_IDE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IDE

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_HDMIDETECT to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_HDMIDETECT

Note that we cannot do 'default y if VIDEO' because this option is only
enabled for a small subset of mx6 boards. Also this command is is not a
great implementation (it doesn't use driver model).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_HD44760 to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_HD44760

Also drop CONFIG_CMD_HD44780 which appears to be a typo.

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Add CONFIG_HASH to enable hashing API

At present CONFIG_CMD_HASH enables the 'hash' command which also brings
in the hashing API. Some boards may wish to enable the API without the
command. Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_HASH to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_HASH

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_GSC to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_GSC

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_GETTIME to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_GETTIME

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_FUSE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FUSE

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_FPGA_LOADBP et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FPGA_LOADBP
   CONFIG_CMD_FPGA_LOADFS
   CONFIG_CMD_FPGA_LOADMK
   CONFIG_CMD_FPGA_LOADP

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_FPGAD to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FPGAD

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_FDT_MAX_DUMP

This option is not used by any board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_FDC to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FDC

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ETHSW to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ETHSW

Also enable it for sandbox to increase build coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ESBC_VALIDATE to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ESBC_VALIDATE

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_ERRATA to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ERRATA

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_ENV_FLAGS to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ENV_FLAGS

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ENV_CALLBACK to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ENV_CALLBACK

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_CMD_ENV

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ENTERRCM to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ENTERRCM

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_EEPROM et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_EEPROM
   CONFIG_CMD_EEPROM_LAYOUT
   CONFIG_EEPROM_LAYOUT_HELP_STRING

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_CMD_EECONFIG to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_EECONFIG

Signed-off-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_CMD_ECCTEST to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ECCTEST

Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig: Drop CONFIG_SYS_I2C_DS4510_ADDR

This is only used by one board and always set to 0x51. Drop this option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_SYS_I2C_DS1621_ADDR

Now that dtt is gone, this is not used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

Drop digital thermometer and thermostat (DTT) drivers

This subsystem is quite old. It has been replaced with a driver-model
version (UCLASS_THERMAL). Boards are free to convert to that if required,
but here is a removal patch that could be applied in the meantime.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

Drop three-wire serial (TWS) support

This subsystem has not been converted to driver model, there is only one
driver and only one board that uses it. Drop it and its CONFIG option.

Also drop the rtc4543 RTC driver since it uses TWS.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Kconfig: Drop CONFIG_SYS_I2C_DTT_ADDR

This option is only defined to a non-default value by canyonlands, which
needs conversion to driver model (where the I2C address would be defined
by the device tree).

Drop this option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Convert CONFIG_DS4510 to Kconfig

This converts the following to Kconfig:
   CONFIG_DS4510

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510

This option enables a command in the driver. But the functions defined by
the driver are not called anywhere else in U-Boot. So it does not seem
useful to have this driver without its commands.

Drop this option, move the header file out of the common include/
directory and make all the function static.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510_RST

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510_MEM

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Kconfig: Drop CONFIG_CMD_DS4510_INFO

This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

lib: move hash CONFIG options to Kconfig

Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it.  Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool.  In many cases we can select
these because they are required to implement other drivers.  We also
correct how we include the various hashing algorithms in SPL.

This commit was generated as follows (after Kconfig additions):

[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.

Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Chander Kashyap <k.chander@samsung.com>
Cc: Steve Rae <steve.rae@raedomain.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

FIT: Rename FIT_DISABLE_SHA256 to FIT_ENABLE_SHA256_SUPPORT

We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which
is enabled by default and now a positive option.  Convert the handful of boards
that were disabling it before to save space.

Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Lukasz Dalek <luk0104@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

test: py: Add cmd_echo dependency

There is missing dependency on echo command. Mark tests which requires
echo.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

Convert CONFIG_SPL_BOARD_INIT to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_BOARD_INIT

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
[trini: Update the Kconfig logic]
Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://denx.de/git/u-boot-imx

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

Merge branch 'master' of git://git.denx.de/u-boot-usb

ARM: dts: am335x-evm: disable mmc3

SDIO is not supported in u-boot, there is no point in enabling mmc3.
For this purpose, add u-boot specific dtsi that this will be included
automatically while building the dtb.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

scripts/Makefile.lib: Always have ...-u-boot.dtsi be able to override

The intention of having a -u-boot.dtsi file is to be able to make
changes to the provided upstream dts files as well as to be able to add
nodes.  Change the logic for adding the file from making it the last
included file at the top of the dts to being included at the end of the
file.

Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot-imx

Signed-off-by: Stefano Babic <sbabic@denx.de>

arm: socfpga: Enable build for Arria 10

Update Kconfig and Makefile to enable Arria 10.
Clean up Makefile and sorting *.o alphanumerically.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add board files for the Arria10

Add support for the Arria10 SoCDK.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add config and defconfig for Arria 10

Add config and defconfig for the Arria10 and update socfpga_common.h.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add SPL support for Arria 10

Add SPL support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: dts: Add dts and dtsi for Arria 10

Device tree files for Arria 10

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add misc support for Arria 10

Add misc support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add pinmux for Arria 10

Add pinmux support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add sdram header file for Arria 10

Add sdram header file for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add system manager for Arria 10

Add system manager register struct and macros for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add clock driver for Arria 10

Add clock driver support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add reset driver support for Arria 10

Add reset driver support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Add A10 macros

Add i2c, timer and other A10 macros.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Restructure misc driver

Restructure misc driver in the preparation to support A10.
Move the Gen5 specific code to gen5 file.

Change all uint32_t_to u32.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Restructure system manager

Restructure system manager in the preparation to support A10.
No functional change.

Change uint32_t to u32.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Restructure reset manager driver

Restructure reset manager driver in the preparation to support A10.
Move the Gen5 specific code to gen5 files.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: socfpga: Restructure clock manager driver

Restructure clock manager driver in the preparation to support A10.
Move the Gen5 specific code to _gen5 files.

- Change all uint32_t to u32 and change to use macro BIT(n) for bit shift.
- Check return value from wait_for_bit(). So change return type to int for
  cm_write_with_phase() and cm_basic_init().

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

usb: lpc32xx: add i2c DM support

Add DM support for i2c functions.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Reviewed-by: Marek Vasut <marex@denx.de>

pinctrl: imx: fix memory leak

Each time set_state is called, a new piece memory will
be allocated for pin_data, but not freed, this will
incur memory leak.

When error, the devm API could not free memory automatically.
So need call devm_kfree when error.

Issue reported by Coverity

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefano Babic <sbabic@denx.de>

imx: mx7dsabresd: fix secure config after switching to DM

mx7dsabresd_secure_defconfig was not updated after moving to DM.

Signed-off-by: Stefano Babic <sbabic@denx.de>

imx: mx7dsabresd: switch to DM USB

Switch to use DM USB.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: mx7dsabresd: reset ENET_RST_B

Reset ENET_RST_B to make ENET function stable.
Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds
to ENET_RST_B.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

imx: mx7dsabresd: enable more DM drivers

Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO
enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled.
So needs to enable them together.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

gpio: 74x164: make oe-pins optional

Make oe-pins optional because some boards have fixed it to enable.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

spi: kconfig: add soft spi Kconfig entry

Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the
SPI signals. We use it for accessing 74x164 on some i.MX boards.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb: add usdhc support

Add usdhc support

Signed-off-by: Peng Fan <peng.fan@nxp.com>

arm: dts: imx7d-sdb: add i2c support

Add i2c support.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb: add regulator node for usb and mmc

Add regulator node for usb and mmc.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb: add spi gpio node

Add spi gpio node for 74LV595.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb add basic dts

Add basic dts for i.MX7D-SDB board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7: sync with Linux

Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'").

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>

imx: ventana: update imx wdog external reset dt property

Early backports of the imx wdog external reset feature occured before the
property was accepted upstream and used 'ext-reset-output' instead of
'fsl,ext-reset-output'. In order to support older kernels remove both
properties.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: fix GW520x external watchdog dt update

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

mx6sabresd: Remove non-SPL targets

Now that mx6sabresd_spl_defconfig can be used to boot all
mx6sabresd variants, the non-SPL targets can be safely removed.

Signed-off-by: Fabio Estevam <fabio.estvam@nxp.com>

mx6sabresd: Add SPL support for the mx6dl variant

Add support for the mx6dlsabresd board in SPL.

Retrieved the DCD table from:
board/freescale/mx6sabresd/mx6dlsabresd.cfg
(NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga)

Flashed SPL and u-boot.img to an SD card and could successfully boot it
on mx6q, mx6qp and mx6dl sabresd boards.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

mx6sabresd: Prepare for supporting MX6DL

Currently only MX6Q/QP sabresd boards are supported in SPL.

In order to also support MX6DL we need to convert to using
IOMUX_PADS and SETUP_IOMUX_PADS macros.

Other than that move the <asm/arch/mx6-ddr.h> header inclusion to the
SPL code block in order to avoid build error.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

engicam: common: Move board_late_init

Move board_late_init into common area from supported boards.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

engicam: common: Move common board code

Move possible common board code into common area
from supported boards.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

geam6/isiot: Move the spl code common

SPL code for geam6 and isiot are same, so
move them in common area.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

icorem6[_rqs]: Move the spl code common

SPL code for icorem6 and icorem6_rqs are same, so
move them in common area.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

i.MX6UL: isiot: Add SETUP_IOMUX_PADS

Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads
and use them in Is.IoT board.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

isiot: Fix to use usdhc2_pads for mmc2

mmc2 in Is.IoT using usdhc1_pads instead usdhc2_pads,
so update the same.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

i.MX6UL: geam6ul: Add SETUP_IOMUX_PADS

Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

icorem6: Use drive strength macros

Use driver strength macros instead of hex numbers.
- IMX6DQ_DRIVE_STRENGTH - 0x30
- IMX6SDL_DRIVE_STRENGTH - 0x28

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

icorem6: Use proper iomux_ddr_regs drive strength values

Usually the drive strength values for DQ and SDL are 0x30 and
0x28 respectively, update them accordingly.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

engicam: Move uart mux init to SPL

Since, u-boot handle fdt through uart so move the UART code
to SPL instead make it to global area.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

icorem6: Make SPL to pick suitable fdt

SPL FIT is able to pick the suitable fdt file for u-boot,
so add that function through board_fit_config_name_match.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

engicam: Set fdt_file env during run-time

Set fdt_file env variable during board_late_init

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

geam6ul: Add mmc_late_init

Let the runtime code can set the mmcdev and mmcroot based
on the devno using mmc_get_env_dev instead of defining
separately in build-time configs using mmc_late_init func.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

geam6ul: Add modeboot env via board_late_init

Add runtime, modeboot env which is setting mmcboot, or
nandboot based on the bootdevice so-that conditional
macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should
be avoided in config files.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

icorem6: Add mmc_late_init

Let the runtime code can set the mmcdev and mmcroot based
on the devno using mmc_get_env_dev instead of defining
separately in build-time configs using mmc_late_init func.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

icorem6: Add modeboot env via board_late_init

Add runtime, modeboot env which is setting mmcboot, or
nandboot based on the bootdevice so-that conditional
macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should
be avoided in config files.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

imx-common: rdc-sema: correct return value

When unlock, if caller is not the sema owner,
return -EACCES, not 1.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

thermal: imx: fix calculation

Fix calculation. do_div can not handle negative values.
Use div_s64_rem to handle the calculation.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

imx: thermal: update imx6 thermal driver according new equation

>From IC guys:
"
After a thorough accuracy study of the Temp sense circuit,
we found that with our current equation, an average part can
read 7 degrees lower than a known forced temperature.
We also found out that the standard variance was around 2C;
which is the tightest distribution that we could create.
We need to change the temp sense equation to center the average
part around the target temperature.
"

New equation:
Tmeas = (Nmeas - n1) / slope + t1 + offset
n1= fused room count
t1= 25
offset=3.580661
slope= 0.4148468 – 0.0015423*n1

According the new equation, update the thermal driver.
c1 and c2 changed to u64 type and update comments.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>