Partially Revert OC_LOG -> OIC_LOG for service layer

There is currently no OIC_LOG_PAYLOAD function

Change-Id: Ie6e349f85a96fd9267fcd563385a0f9e1a3b93cd
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4869
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

modified target transport type related blockwise transfer.

since EDR is not support BWT anymore,
I removed the build script related that.

Change-Id: I105bf0d9d4d921ca760808b2aff8776a3973ebf1
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4777
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Modify RCSRequest to wrap OCResourceRequest

RCSRequest just wraps OCResourceRequest and it exposes OCResourceRequest for users who want to get information from oc request.

Change-Id: I12d2210e672c6d1a49d4766e07a0d648a7982773
Signed-off-by: coderhyme <jhyo.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4863
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Updated documentation for BundleActivator::destroyResource

The documentation said that the destroyResource destroys and registers
the the resource.

It should unregister the resource then destroy.

Change-Id: Ib9f628097a89f87bbb8e20f4ba562dc687d4cebe
Signed-off-by: George Nash <george.nash@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4851
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Markus Jung <markus.jung85@gmail.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Wait for Linux BLE event loop to start before stopping.

This addresses a corner case where the LE transport is stopped before
it has fully started.  In that case, the thread running the GLib event
loop never exited since the event loop itself was still running.  That
ultimately caused the CA layer termination to block indefinitely on a
pthread_join().

Change-Id: I521c7a66c6541cb14df7d4ba098899f303e50999
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4853
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Added RCSRepresentation class and get function with params in PrimitiveResource.

The class is to represesnt resource information in a form of hierarchy.
It replaces ResponseStatement which was a class used internally.
Addtionially broken tests in PrimitiveResource related with Set operation are fixed.

Change-Id: I0b1bcc97b0b210a5a2c3da6e6219de1ff3fc727c
Signed-off-by: coderhyme <jhyo.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4871
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Replaced current TAG with 'OIC_xxx' in c_common and routing

To make easy debugging,
I have modified TAG in c_common and routing.
It is better to add common string 'OIC_' + current TAG name.

Change-Id: I1965db71f58f0ab4dfe3e0bacdd243098d2baf77
Signed-off-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4845
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

modified the initialize/deinitialize logic in CA

I changed the initialize/deinitialize logic in CA adapter
and removed the unnecessary code.

Change-Id: Ia9d3dd503f25a393a4053c95c508d1166c574b73
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4833
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Simulator Build

Adds a build for the IoTivity Simulator Eclipse plugin to auto_build.sh

Change-Id: Ia98c34c004fff542c98b5f1d683cb98889926fe5
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4773
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Harish Marappa <h.marappa@samsung.com>
Reviewed-by: Radha Bhavani <radha.p@samsung.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

replaced OC_LOG with OIC_LOG in service layer

Change-Id: I892b23e6087368addb63a418fac7f95794aae04d
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4835
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

things-manager: remove reference to groupsyncaction

This SConscript tried to include service/things-manager/sampleapp/linux
/groupsyncaction/SConscript which does not exists, remove the reference.

Change-Id: Ic5265db3757539113121d1e68df542ca744b54e8
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4819
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jihun Ha <jihun.ha@samsung.com>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Clean up documentation warnings reported by doxygen

Most of the documentation cleanup is due to overloaded member functions.

The @overload tag was used to remove the warnings. All of the parameteres
are documented for both functions with the @see tag added for each
overloaded function. This is a balance between not repeating documentation
yet still keeping the output clean. To have clean output some repetition
is required.

The @override tag was removed from the move constructors since @override is
not a keyword understood by doxygen.  The best I could tell the documentation
should have been the same for the move constructors as it was for the the
copy constructors.

note: @overload automatically adds "This is an overloaded member function,
provided for convenience. It differs from the above function only in what
argument(s) it accepts." to the output documentation.

Change-Id: Id167dc8d38bcca65d91a8bd3d6e43f9ca291aa79
Signed-off-by: George Nash <george.nash@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4815
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Fix CA Layer build warnings

This patch fixes compiler warnings related to CA Layer.

Change-Id: I2c92a201492cf2e9b8eff2d58ce187bf397a8239
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4693
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

tcp_adapter: use CASecureEndpoint_t

The callback function for g_networkPacketCallback gets
CASecureEndpoint_t as first parameter and not CAEndpoint_t. The TCP
adapter always provided it with the wrong type CAEndpoint_t. This patch
makes the tcp adapter use CASecureEndpoint_t instead and fix this
problem.

Change-Id: Ic3b1ca0aadf7a95c846a31424932a7e90a86a55b
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4821
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

connectivity: fix warning about missing method declarations

The WITH_TCP define is not set here, but the libcoap header checks for
it and only adds the tcp functions if it is set. Add it here to fix the
warnings.

Change-Id: I28f1831341583597f5bf06406724e236911b0b81
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3393
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

To Integrate logger files

There are two logger files in iotivity.
These are 'resource/csdk/logger' and
'resource/csdk/connectivity/common/logger'.

since 'resource/csdk/connectivity/common/logger' is using in only CA.
it is better to integrate with 'resource/csdk/logger'
so only 'resource/csdk/logger' will be used after that.

ps. oc_* logger name will be replaced with oic_* name
    through other Change

Change-Id: I195b6d9e8066bcc87c0a9ea50a3bf335e3b7340a
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Signed-off-by: koushik.girijala <g.koushik@samsung.com>
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4623
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Disable compilation of IoTivity Services for iOS

As this is already disabled for Darwin, it should be disabled for iOS as
well.

Change-Id: Id1c984bfb3bb32896227721ad620904b92d7f2dd
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4817
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Add Install build tools and a missed library to the Readme.scons.txt

Add the apt-get command to add the build tools used by the IoTivity
build. This includes valgrind that is only needed in some build
configurations.

libglib2 is required for the  build but seems to be missed in the
readme file as well.

Change-Id: I8fc514a584c7b2134edd55052e4dfe229f2fbf51
Signed-off-by: George Nash <george.nash@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4813
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Corrected incompatible pointer and format specifier warnings.

Change-Id: Id2d0dfaafbb7bb9c6c0f4863e2c3822c8cd23018
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4803
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Add OICFree() to release the memory already allocate for the uri

Change-Id: I14590e2f5427c5aef80eefce0b264eb6b4344328
Signed-off-by: Jay <junghyun.oh@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3935
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

[IOT-771] Reintroduce missing Linux BLE adapter code.

The IoTivity BLE Linux transport doesn't send data due to missing
code, e.g. stub implementations for several functions required by the
CA LE interface. A incorrect revision was merged during the code
review, likely because the gerrit draft revision with the correct
implementation was not published, and ultimately lost. This patch
reintroduces implementations for those functions.

Change-Id: If9e9f7ebaeebb9072cd7762e94a82ef45809f95b
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3011
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

process return type for some method related CAConnectivityhandler_t

Change-Id: I02ab53c144275b96e16288e41c1f8648273190eb
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4763
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Revert "Update secure resource related modules(SRM,OTM,SRP,CKM,unit tests,samples) according to spec B."

Roll back the JSON changes for waiting until the Security Spec JSON definitions are released.

This reverts commit b578b61090303a71ae07126107c40c18238a02cd.

Change-Id: I8c520b0a99ca2dbae6c3e44ff93f5221288a4188
Signed-off-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4797
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Nathan Heldt-Sheller <nathan.heldt-sheller@intel.com>
Reviewed-by: Chul Lee <chuls.lee@samsung.com>

Removed unneccessary code for stack

I have removed unneccessary code for stack
and some code format has been changed more clearly

Change-Id: Ia9d970a2a8b6e3637f472d6384993d512b791514
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4701
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

[IOT-844] Modify Tizen spec forprovisioning

Signed-off-by: Hugues Ekra <hekra@cisco.com>
Change-Id: I6ef65066d68a45767b0a825bf309454d289bfb61
Reviewed-on: https://gerrit.iotivity.org/gerrit/4309
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: koushik girijala <g.koushik@samsung.com>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>

[IOT-919] Only run send queues if GATT adapter is running.

Don't run the client and server side sending queue threads unless the
client and server, respectively, have actually started.  This addresses an
issue where an attempt to send data from a GATT client to a server
fails due to no connection being established beforehand, as well as
accessing uninitialized resources that are only fully initialized
after server start.

Change-Id: I7b6e9728c2edc6a2a283836f7ee31b68555fc34d
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4665
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Kevron Rees <tripzero.kev@gmail.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

build: avoid to use ARMv5 machine flags by default

To use this flags it is encouraged to set TARGET_ARCH to "*v5*" from.
If unset, generic (buildsystem)'s flags will be used as expected.

I noticed this while building with Tizen:2.4:Mobile toolchain (gbs)
but it could also affect other ports or build infrastructures.

Bug: https://jira.iotivity.org/browse/IOT-694
Change-Id: I4bc279e809474bf664b4825f201df471c66a191c
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4541
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Corrected signed/unsigned integer comparison warnings.

The return value of the ftell() function was assigned to an unsigned
integer typed variable and then compared to -1.  Since ftell() actually
returns a 'long' assign to a 'long' instead.  This addresses
signed/unsigned integer comparison warnings.

Change-Id: I990e891ee2ad1f81cd0721ad82646fcf2e79d2b0
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4689
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

code refactoring on camessagehandler

Some codes need a refactoring
like memory free missing when a initialize fails.

Change-Id: Ifdb8c790b666c9d2203a0d3b8f4976382ff1f074
Signed-off-by: jw0213.jung <jw0213.jung@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4783
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Updated the android version to API 23 and build tools version to 23.0.1.
The user will be prompted to download these versions if they do not have
Android SDK installed. Both are the latest supported versions.

Change-Id: I6c988b9dcde12b47406a8490840d07c135c5dd0e
Signed-off-by: Rahul Rahul <rahul.rahul@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4759
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Allow empty token usage.

RFC7252: An empty token value is appropriate e.g., when
no other tokens are in use to a destination, or when requests are
made serially per destination and receive piggybacked responses.

Empty tokens are often used by clients in order to have more compact
messages.

Change-Id: I2b409159a225f06ba80130547ffc9d5cabfee298
Signed-off-by: Stephane Lejeune <stlejeun@cisco.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3911
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

android: c_compat: add __cmsg_nxthd() for Android KitKat 4.4

The function __cmsg_nxthd() is missing in Android 4.4, but the Android NDK
header files in the version we are using are referencing it and we use it in
our code, this functions was added in version 5.0. To make IoTivity
dynamically loadable on Android KitKat 4.4 add this functions
as a weak symbol, so it will be used if the c lib does not provide it, like
on Android < 5.0 This code was taken from these two resources:
https://raw.githubusercontent.com/android/platform_bionic/master/libc/bionic/__cmsg_nxthdr.cpp
https://github.com/android/platform_bionic/commit/ff64831b0965c16c95c9f81a148f30a6ef3a6c64

Change-Id: I02ef763cf3f82c73b1e0169230dd8c7e9d6d379b
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3895
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

updated the code related ipadapter more clearly

Change-Id: Iff3bf220017bc447ef0e73c8f25f92bb50aa9539
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4699
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

merge the duplicated function in camessagehandler

There were two functions separately for sending request/response message
although they had almost same codes. So I merged it.

Change-Id: Iecaf407d765f04bbffea8b98fbe22b06fa540434
Signed-off-by: jw0213.jung <jw0213.jung@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4781
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Moved common method to check null parameter.

preprocessor to check Null parameter is in adapter util.
however it checker is using here and there.
so it is better to move common header.

Change-Id: If54032ada0926da0f8917d1d32f36498a9054a12
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4555
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

removed unnecessary BLE interface method

and both initialize and terminate method are called
here and there irregularly.
to make sure correct usage, I modified BLE codes related interface

Change-Id: I26a89ae3079a834200533678e2ae8aba0d683122
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4767
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

changes the tcp adapter logic for exception case.

if the sending side pauses or goes offline after sending
a partial message, the receive thread will spin.
because receiver is waiting for the remained data.
so I modified the receive logic to processing the partial message.

Change-Id: I54d54238728ca1945874e09ed70ea310072dda51
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/2987
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Fix security unittest regarding iotvticalendartest on 32 bit OS

-issue : IsRequestWithinValidTimeTest.IsRequestWithinValidTimeValidPeriod1 is failed on 32 bit OS
-reason : On 32 bit OS, integer overflow occur in return of mktime due to Year 2038 problem,
        when Checking whether endDateTime is after startDateTime in iotvticalendar.c
-solution : Checking the period using tm structure members instead of mktime and difftime function.

-Patch#5 : Split long lines

Change-Id: I5bb14336573ee8b7d42dbbe4f3c45af44f937c3e
Signed-off-by: js126.lee <js126.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4765
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Andrii Shtompel <a.shtompel@samsung.com>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>

Added missing AUTHENTICATION_FAILED OCException reason.

Fixed warning about missing OC_STACK_AUTHENTICATION_FAILED case in
OCException::reason() switch statement, and added appropriate
corresponding string constant.

Change-Id: Ibdc2d68f9cfb76f8165a62bce65dc183b19d7622
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4709
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-by: Ivan Pazderskyy <i.pazderskyy@samsung.com>
Reviewed-by: Andrii Shtompel <a.shtompel@samsung.com>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>

ip_adapter: fix setting setsockopt() IP_MULTICAST_IF on Linux kernel < 3.5

The struct ip_mreq is only support since Linux 3.5 and not on older Linux
versions for IP_MULTICAST_IF. On older and also on recent Linux kernel
versions using struct ip_mreqn (version with n at the end) is still supported.
See the man page for details: http://man7.org/linux/man-pages/man7/ip.7.html

Without this patch I was getting this error message when trying to send a
multicast message from a USB tethered Android phone:
E/IP_SERVER: send IP_MULTICAST_IF failed: Cannot assign requested address (using defualt)
after applying this patch this operation works and it looks like IoTivity
with IP works on the Android phone.

In parameter imr_ifindex the interface index should be provided, but if
it is set to 0 it gets ignored and should behave like the old code.

Change-Id: I6e8ad376357eee49b2cd29dc792092fe3f7af0b6
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4651
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

fixed CoAP/TCP header type check logic from the size.

The first nibble of coap over tcp message format is used
to indicate the length of the options/payload.
if the first nibble is 13, An 8-bit unsigned integer follows
the initial byte and indicates the length of options/payload minus 13.
(14: 16-bit unsigned integer,
     indicates the length of options/payload minus 269.
 15: 32-bit unsigned interger,
     indicates the length of options/payload minus 65805)

Change-Id: I2a88eb161584fb0104d2b533e3456c19a4b99304
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4479
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Refactored 'RCSDiscoveryManager'

The class is refactored for readability and better structure.

Change-Id: Iefb4b71fb074358e833d779139fbb646c759f022
Signed-off-by: coderhyme <jhyo.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4751
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Fix get platform info issue when ROUTING_GATEWAY

Change-Id: I6356ee398b5c435f8c0a6d08e3032e78d83420a1
Signed-off-by: youngman <yman.jung@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4077
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Fix provisioning unittest SConscript path

When built with TEST option enabled, the wrong path in provisioning SConscript caused an error.
The path in the SConscript has been corrected to reflect its location.

Change-Id: Iedecd4867255ea68e936c2bc20d9e97ae41ce909
Signed-off-by: Jongmin Choi <jminl.choi@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4753
Reviewed-by: Jongsung Lee <js126.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>

Update secure resource related modules(SRM,OTM,SRP,CKM,unit tests,samples)
according to spec B.

* NOTE : https://gerrit.iotivity.org/gerrit/#/c/4733/ required,
         in order to provisioning tool works in debug mode.

1. Change the security resource name according to spec B.

2. Remove unnecessary security resource according to spec B.

3. Remove the entity of resource name from coap/coaps payload as follows :
  [Before]
  {
    "doxm":
    {
      "oxm":[0],
      "oxmsel":0,
      "sct":1,
      "owned":true,
      "deviceid":"anVzdHdvcmtzRGV2VVVJRA==",
      "devowner":"YWRtaW5EZXZpY2VVVUlEMA==",
      "rowner":"YWRtaW5EZXZpY2VVVUlEMA=="
    }
  }

  [After]
  {
    "oxm":[0],
    "oxmsel":0,
    "sct":1,
    "owned":true,
    "deviceid":"anVzdHdvcmtzRGV2VVVJRA==",
    "devowner":"YWRtaW5EZXZpY2VVVUlEMA==",
    "rowner":"YWRtaW5EZXZpY2VVVUlEMA=="
  }

4. Modify the sample SVR DB(.json) according to above modifications.

5. Modify the unittest according to above modifications.

[Patch #1] Initial upload
[Patch #2] Update commit message
[Patch #3] Retrigger
[Patch #4] Upload missing file.
[Patch #5,#6] Modify according to comments.
[Patch #7,#8] Update commit message.

Change-Id: Ic6842af77c7098f30e7823597f807bb8a55d4541
Signed-off-by: leechul <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4725
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: sangsu choi <sangsu.choi@samsung.com>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>

Fix CKM's unit test issue

Details:
1. Fix SetNumberOfRevoked() API to use value instead of pointer
2. Fix SetCRLSerialNumber() API to use value instead of pointer
3. Fix SetNextSerialNumber() API to use value instead of pointer
4. Fix all places where those functions were called

Change-Id: I35000d84391399c1fd915678bc3bbed31761bcc5
Signed-off-by: Andrii Shtompel <a.shtompel@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4731
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-by: sangsu choi <sangsu.choi@samsung.com>
Reviewed-by: Ivan Pazderskyy <i.pazderskyy@samsung.com>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>

OICSensorBoard: rename resource type to comply RFC-6690

Change-Id: I72bacb30803b8947eb5cf37ced83b0a088d64ae2
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4741
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Habib Virji <habib.virji@samsung.com>

Modify OCParseSecurityPayload() to prevent core-dump in debug mode.

   1. Add cbor value verification code
   2. Remove the cbor_value_leave_container() invoking.

Change-Id: Iaa0b784c1688eddff8d1a1eec6406f396e508db7
Signed-off-by: leechul <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4733
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>

Modify the remove device related API to use client UUID of OCClientResponse

If we failed remove deivce, PM API will set device status as stale.
We need to add mechanism to clean up the stale status of device.
It will be uploaded to the next.

[Patch #1] : Intial upload
[Patch #2] : Update commit message
[Patch #3] : Modify according to comment.
[Patch #4,#5] : Modify according to Sachin's comments.
[Patch #6] : Modify typo

Change-Id: I0268b0820e2e0dbddeeba247bbc14d679d6fd7bb
Signed-off-by: leechul <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4579
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>

DTLS handshake retransmission

DTLS retransmission initiated after dtls context successfully created.
After that it starts each 2 seconds (using Timer) and call dtls_check_retransmission()
It stops when global dtls session was destroyed

Change-Id: Idc2216a4773feea44a306fcee78b8c779b595abe
Signed-off-by: Andrii Shtompel <a.shtompel@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4647
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>
Reviewed-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-by: sangsu choi <sangsu.choi@samsung.com>
Reviewed-by: Ivan Pazderskyy <i.pazderskyy@samsung.com>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>

Correct some defects detected by Static Code Analysis Tool in things manager

After running Static Code Analysis Tool(Svace) for things manager codes, some defects have been
detected. Most of the defects are about null pointer handling and variable
initialization. This patchset is for covering these defects.

Change-Id: I97c3a58f08576ef50b636e52027311e7e9e1d04c
Signed-off-by: Jihun Ha <jihun.ha@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4465
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

[easysetup] Static code analysis fix in provisioning

- Static code analysis bug is fixed

Change-Id: I7b7c5b3dd284de20a48aaf90a3b5bcbb72565714
Signed-off-by: lankamadan <lanka.madan@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4513
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Fix for defects detected by static analysis for resource-container

modify resource container sample and unittest to fix defects detected

Change-Id: I7c6520d3ca5d4576f4bf1525e42a9f4e983cca87
Signed-off-by: Minji Park <minjii.park@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4633
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Merge branch 'simulator'

Change-Id: Iee9352bd3bf67c5db6aa07f0ea10639b180bfedc
Signed-off-by: G S Senthil Kumar <senthil.gs@samsung.com>

Merge branch 'master' into simulator.

Change-Id: Ib0054018e0b27b9eb84ac8bb4dd7955c98ec731a
Signed-off-by: G S Senthil Kumar <senthil.gs@samsung.com>

Add wrong PIN defence codes in case of PIN based OxM

 * Add CAErrorCallback in OTM to handle result of DTLS handshake.
 * Our implementation as follows :
    1. Implemente CAErrorCallback(DTLSHandshakeCB) in OTM to handle result of DTLS handshake.
    2. Try dtls handshake.
    3. Wait for handshake result.
    4. Invoke CAErrorCallback(DTLSHandshakeCB) at CAHandleSecureEvent() when handshake is finished.
    5. Handle handshake result in DTLSHandshakeCB.
        - in case of success, we can send next coaps request.
        - in case of failure, return the error value or restart ownership transfer.

Related jira : https://jira.iotivity.org/browse/IOT-831

[Patch #1] Intial upload
[Patch #2] Remove white-space
[Patch #3] Update comment
[Patch #4] Update according to comments
[Patch #5] Revert extlibs/tinydtls/crypto.c to seprate changeset
[Patch #6] Rebase
[Patch #7] Modify the stCADtlsContext_t to save the OTMContext.
[Patch #8] Remove white-space.
[Patch #9] Modify according to sachin's comment.
[Patch #10] Modify according to comments.
[Patch #11] Remove whitespace
[Patch #12] Rebase by sachin
[Patch #13] Update commit message

Change-Id: I034b0e9ad267cb6998ce3df3ce50629583740608
Signed-off-by: leechul <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4143
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>

/oic/res response for the RD

Earlier collection payload was added in discovery payload to handle RD response in
a separate way in form of tags and links. But with recent changes and discussion
baseURI is mvoed to discovery payload.

With this change there is one response for /oic/res with an additional field for RD.

Change-Id: Ia29cc64ffb48062d72ee4b9a9b59013480f13ff1
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4611
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Removed collection resource and device support from simulator plug-in.

1. Collection resource and device related UI has been removed
   from service provider eclipse plug-in.
2. This check-in also includes refactoring and fixing of minor UI bugs.

Change-Id: I1b12620202d3a861c251afb8ae4e14c5a96b7b44
Signed-off-by: G S Senthil Kumar <senthil.gs@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4635
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

IoTivity Simulator System testing bug fixes.

1. Resolved issues found during stress testing.
2. Limiting the maximum number of resources that can be created
   from server to 200(Considering block-wise transfer and application
   stability).
3. Includes minor optimization and code clean-up.

Change-Id: If196b72b5221e3795b4693f00a99d33650c0a8d0
Signed-off-by: G S Senthil Kumar <senthil.gs@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4431
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Radha Bhavani <radha.p@samsung.com>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>

Fixed simple fixes according to static code analysis for resource-container

- Prohibit implicit copy-contructor and assignment operator for certain classes.
- Update copyright note

Change-Id: I0893aa2a4de23832fb9d540128f106fd7b45bafa
Signed-off-by: Markus Jung <markus.jung@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4489
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Make sure the Platform Resource and Device Resource have 2 interfaces.

The /oic/d and /oic/p resources must have oic.if.r and oic.if.baseline
interfaces specified.

This is also for IOT-874.

Change-Id: Ia6a666c03e954634d4589c2bbe8a3a4d72ad8a86
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4587
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Modified discovery payload to be spec compliant.

The discovery oic/res payload had the device id "di" and "links"
being repeated for every resource. The payload itself was not structured
in a spec compliant way.

Plucked out di and links from every resource and put in the root map.
The format for the payload is "modelled" as JSON.
[
    {
        "di" : UUID,
        links :[
                    {
                        href, rt, if, policy        // Resource 1
                    },
                    {
                        href, rt, if, policy        // Resource 2
                    },
                    .
                    .
                    .
                ]
    }
]

Change-Id: I2c50a7cc1ee46df633810372e446ac92c5e496f5
Signed-off-by: Mandeep Shetty <mandeep.shetty@intel.com>
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Signed-off-by: Mandeep Shetty <mandeep.shetty@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4543
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Markus Jung <markus.jung85@gmail.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Add /oic/d and /oic/p discovery response messaging to IoTivity.

Prior to this, Clients could only perform a GET request directly on
/oic/d and /oic/p. This commit also enables performing DISCOVERY
requests on /oic/d and /oic/p as well.

This aligns with OIC spec compliancy.

This fixes Jira Ticket IOT-874.

Change-Id: I29693a67bb245b3fae8d1ed54833eacd1397884e
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4567
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Markus Jung <markus.jung85@gmail.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Update index of Zigbee Resources when a NodeId changes.

Change-Id: Ia1ffd7ebb7bba51fdb211a33000713c7e1daab32
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3937
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Replaced zigbee nodeId in URI with zigbee eui.

Change-Id: Ib2df8d45ceb9ecd62bc8fab3978ac8d30f3571e8
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3785
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Added context for callbacks.

Change-Id: Ia20cae8abc1e4a4112bc70608fb482174701abbb
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3939
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Added context parameter.

Change-Id: Ic4616d69ff78fdef4897fd7ca47f0192a4f9420e
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3927
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

check the method type of request info.

if method type of request info is invalid,
CA has to return error code to RI Layer.

Change-Id: Ic34da1c13e63172885a44a114a86f52cbbb34f6f
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4565
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: MyeongGi Jeong <myeong.jeong@samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

fixed sample app defects detected by static analysis

fixed issues in CA sample app reported by static analysis tool

Change-Id: I1eaf0c6bedb0a86e8da7edf3301dcd06cb1ddfbf
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4401
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

updated Readme.scons.txt file

the build script for each platform is not updated.
so I updated the build script and options.

Change-Id: I5e4298b77fae1bfdacd7539fb199d82afdc7a550
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4393
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Naga Ashok Jampani <jn.ashok@samsung.com>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Enabled CoAP/TCP on android platform

currently, coap/tcp can be supported on linux platform.
so I modified the code to support Android platform.

Change-Id: Ia9a9e36939f848b98393648968ddcfacfa7ce564
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3411
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Naga Ashok Jampani <jn.ashok@samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

IOT-897:OCRepresentation can check attribute type

Change-Id: I6a63bdb958b016385aa20b3467c61c44a1824327
Signed-off-by: Hugues Ekra <hekra@cisco.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4429
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

IoT-875, IoT-876 core value and data model value fix

Updates oic/d to use the following values:
- icv: core.1.0.0 (https://jira.iotivity.org/browse/IOT-876)
- dmv: res.1.0.0 (https://jira.iotivity.org/browse/IOT-875)

Signed-off-by: Markus Jung <markus.jung@samsung.com>
Change-Id: Ia9019f26aa32790fc3bf445c4a7404a5afdd67ea
Signed-off-by: Markus Jung <markus.jung@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4515
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
(cherry picked from commit 2e2fc369a7427525c0d891dc250bdedfba270e85)
Reviewed-on: https://gerrit.iotivity.org/gerrit/4517

Modify incorrect conditional statements in OCParseSecurityPayload

Since, payload format changed as follows :

[ { rep: security payload } ]

to

{security payload}

We don't need check whether cbor value is a map.

Change-Id: I65912c4bacd9e33cee991d5ba37c8ae1b01d0f1d
Signed-off-by: leechul <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4511
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: dongik Lee <dongik.lee@samsung.com>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>

Added api in PDM to set device as stale

Remove Device API deletes the device from the PDM. but if value is deleted from
DB then we loose that device's reference which is required by other functions of
same API.

To overcome this issue we have added device stale API which instead of removing
device row, sets stale status of device as true.

Due to this chnage APIs like PDMLinkDevices and PDMGetOwnedDevices are also changed.
these apis now ignore data corresponding to stale entries.

Change-Id: I9ee2180296163e289724c7c71f70c4271b9f1c4f
Signed-off-by: Randeep Singh <randeep.s@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3415
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: dongik Lee <dongik.lee@samsung.com>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>

Update the OC_SPEC_VERSION macro

Updated the spec version from 0.9.0 to 1.0.0 in octypes.h file.

Change-Id: I2968a167fa4c76ba85e46d3a2eaf42451d07fc7a
Signed-off-by: Ravi Nanjundappa <nravi.n@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4379
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
(cherry picked from commit 099bca1e90fd867f1632e3c4d120465f19573ba7)
Reviewed-on: https://gerrit.iotivity.org/gerrit/4507

Change RD payload in correct format.

Updated RD without surrounding array.
[
   {
     "di":"",
   },
   [
     {links}
   ]
]

Change-Id: I6d6082bcb04f03a80e367dfc081a3e381a4d8f8d
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4495
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

[IOT-898] Propagate result of CA discovery/listen start call.

Capture and return the result of CA discovery and listen start
function calls to allow for better differentiation of transport
adapter initialization and communication errors.

Change-Id: Ib5717600708e36792c020cb1c3b9f9caeaad9839
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4443
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Fix for Build error in Arduino Due Build

Fixed Random Function calls as per random func availability for avr and arm  boards.

Change-Id: I2d4e9aea56d35dd5a8112f1ec90b1215dbc728be
Signed-off-by: koushik.girijala <g.koushik@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4383
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Change SECURITY payload in correct format.

Updated code to correct format:
[ { rep: security payload } ]

to

{security payload}

Change-Id: I8ab414d762b34c75ccff6ac7698d564462636829
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4499
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Change PRESENCE payload in correct format.

Removes enclosing array and rep from the presence payload.

It changes structure from
[{
  rep: {
   presence payload
  }
}]
to
{
  presence payload

}

Change-Id: I44f7fa1d6f18a0a883057ffb52cfc27c5ead596d
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4467
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>

Change DEVICE payload in correct format.

Removes enclosing array, href and rep from the device payload.

It changes structure from
[{
  href: "",
  rep: {
   device payload
  }
}]
to
{
  device payload

}

Change-Id: I374d3c1e6dca24a0ae97f56ac0c5e40d3cbf09e0
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4435
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>

Change PLATFORM payload in correct format.

Removes enclosing array, href and rep from the platform payload.

It changes structure from
[{
  href: "",
  rep: {
   platform payload
  }
}]
to
{
  platform payload

}

Change-Id: I4f475bbbaba905806fba163bb379a47a866e3011
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4433
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>

Change REPRESENTATION payload in correct format.

Updated rep without starting array, href, and removed prop strucutre.
[
   {
     "href":"/BinarySwitchResURI",
     "rt":
     "if":
     "rep":
           {
              "value":true
           }
   }
]
to be
{
    "rt":
    "if":
    "value":true
}

Change-Id: I26fd608999c88323ab1b9fae1e06a270756e9d31
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4327
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Propagate NodeId change to upper layer.

Change-Id: I741889380b0798cadbbad6014639dfec19926b27
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3913
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Added test case for ZigBee Light Temperature and Brightness.

Change-Id: I5e20d2dae522a01140abaf2d97ac218c1b2d60f9
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3889
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Added support for ZigBee Water and Motion sensor and Chroma light.

Change-Id: If60902286ad38466aa62eb127e1a64e18a41d550
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3887
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Handled zone status enrollment on subsequence runs.

Change-Id: I00d2e866bb4af58105e7255124b9d17444d7366a
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3885
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

- Ensure 10 seconds timeout entryType if found or not-found.
- Ignore “REPORTATTR:” prompts.
- Empty the buffer when the stack is initialized.

Change-Id: I4452622951ad07cfc5fe81f4f98e52f96b8d47d4
Signed-off-by: Thuyen Tran <thuyen.c.tran@intel.com>
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3883
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

add the prefix definition to resolve the build error

after '[IOT-828] OCRepresentation to provide host info' was submitted,
build error has been encountered while building WITH_TCP=true option.
so I added the prefix definition for coap over tcp.

Change-Id: Ia479a1946eae78beffc146b61f99ec864bd0b142
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4371
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

RD handling of publishing device address

Correct address in the baseURI field for resource directory.

This patch fixes issues where host() in OCResource.cpp returned
a wrong IP address. It uses baseURI field in the /oic/res to send
publishing device address.

JIRA ISSUE:855

Signed-off-by: Habib Virji <habib.virji@samsung.com>
Change-Id: Idf86fe801e25e32c84268f421feff479270faa1b
Reviewed-on: https://gerrit.iotivity.org/gerrit/4337
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

[IOT-826] Android: Fixed failure on cancelObserve() with High QoS

In addition it propagates the actual error codes
from the C++ exceptions

Change-Id: I49ab61c42c5dade8e021cf1f1ae6fed83f1fee88
Signed-off-by: Tim Kourt <tim.a.kourt@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4387
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Fix for Memory management in Arduino

Modified code to make more heap available in arduino MEGA

Change-Id: I62ebc1bcf08331d7d90871bb2a6dd201f4ae7e4b
Signed-off-by: vimala.v <vimala.v@samsung.com>
Signed-off-by: koushik.girijala <g.koushik@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3879
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

[RE] Added Secure Resource Linux Sample Apps to the RE Layer

- Added API to RCSResourceObject to support OC_SECURE property for
  resource creation.
- Added Secure Resource Linux Applications.

Change-Id: I97fb97387c1c03c44a6a5ff123729107bd28681d
Signed-off-by: Jay Sharma <jay.sharma@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4399
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>

Fix for IOT-769. Sets the uri in OCRepresentation
sent by the server as a response to a client query.

Change-Id: I1c432ce66ba912d04a1b5b35374cf53cf6f95c4b
Signed-off-by: Rahul Rahul <rahul.rahul@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4329
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

libcoap: remove fix build error on big endian systems

In the big endian case an additional typedef is added in a wrong
position in TinyDTLS. This breaks compiling this code on big endian
systems.

Change-Id: Iad854aba112ddb23bf490b064ec6fbf5d01ce6b6
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3951
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: jihwan seo <jihwan.seo@samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Modifying version number

Change-Id: I8b1c1d13c8d3f488cef18d99035c09c11f44bb5f
Signed-off-by: Minchul Lee <slotus.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/3915
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Remove extlibs/expat for removing the PPM

Only Protocol Plugin Manager(PPM) used expat library.
Now, PPM does not exist, so remove this library.

Signed-off-by: YounghyunJoo <yh_.joo@samsung.com>
Change-Id: Ib144294553f0e3e19b85748f4354d760dc508645
Reviewed-on: https://gerrit.iotivity.org/gerrit/4391
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Modify RE layer to use POST operation for set-request

POST operation is for updation.
It is what the set-request exactly does.

Change-Id: I32615b284b5b7222c4a151bc990b1e4f1014ac41
Signed-off-by: coderhyme <jhyo.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4347
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>

Code clean-up, Bug fixes and enhancements in eclipse plug-ins.

1. Enhanced resource deletion UI.
2. Resolved minor issues.
3. Removed unnecessary code.
4. Added code to set the device and platform information from server linux sample.

Change-Id: I5eebd95614e0aefb221cd3b5bc9930d676b40c41
Signed-off-by: G S Senthil Kumar <senthil.gs@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4335
Reviewed-by: RadhaBhavani <radha.p@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>