platform/kernel/u-boot.git
2 years agoConvert CONFIG_LAYERSCAPE_NS_ACCESS to Kconfig
Tom Rini [Mon, 20 Jun 2022 12:07:44 +0000 (08:07 -0400)]
Convert CONFIG_LAYERSCAPE_NS_ACCESS to Kconfig

This converts the following to Kconfig:
   CONFIG_LAYERSCAPE_NS_ACCESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agolcd: Remove legacy CONFIG_FB_ADDR code
Tom Rini [Mon, 20 Jun 2022 12:07:43 +0000 (08:07 -0400)]
lcd: Remove legacy CONFIG_FB_ADDR code

No platforms set both CONFIG_LCD and CONFIG_FB_ADDR at this time, drop
this legacy code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig
Tom Rini [Mon, 20 Jun 2022 12:07:42 +0000 (08:07 -0400)]
Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_FIXED_MMC_LOCATION
   CONFIG_ESDHC_HC_BLK_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agopowerpc: Clean up CHAIN_OF_TRUST related options
Tom Rini [Fri, 17 Jun 2022 20:24:34 +0000 (16:24 -0400)]
powerpc: Clean up CHAIN_OF_TRUST related options

As things stand currently, there is only one PowerPC platform that
enables the options for CHAIN_OF_TRUST.  From the board header files,
remove a number of never-set options.  Remove board specific values from
arch/powerpc/include/asm/fsl_secure_boot.h as well.  Rework
include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for
constructing CHAIN_BOOT_CMD.  Migrate all of the configurable addresses
to Kconfig.

If any platforms are re-introduced with secure boot support, everything
required should still be here, but now in Kconfig, or requires migration
of an option to Kconfig.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agonxp: config_fsl_chain_trust.h: Clean up and remove unused portions
Tom Rini [Fri, 17 Jun 2022 20:24:33 +0000 (16:24 -0400)]
nxp: config_fsl_chain_trust.h: Clean up and remove unused portions

The way that secure boot is implemented today on NXP ARM platforms does
not reuse the elements found in include/config_fsl_chain_trust.h to
construct CONFIG_SECBOOT but instead board header files have their
environment setup as needed and then fsl_setenv_chain_of_trust() will
set secureboot in the environment.  Remove a large number of unused
defines here.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agofsl_validate: Migrate SPL_UBOOT_KEY_HASH to Kconfig
Tom Rini [Fri, 17 Jun 2022 20:24:32 +0000 (16:24 -0400)]
fsl_validate: Migrate SPL_UBOOT_KEY_HASH to Kconfig

Move setting of SPL_UBOOT_KEY_HASH to a non-NULL value to Kconfig.  As
part of this, change fsl_secboot_validate(...) to check that it is
passed a non-empty string, rather than non-NULL.

Cc: Peng Fan <peng.fan@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoarch/Kconfig.nxp: Re-organize slightly
Tom Rini [Fri, 17 Jun 2022 20:24:31 +0000 (16:24 -0400)]
arch/Kconfig.nxp: Re-organize slightly

Make all of the CHAIN_OF_TRUST options be under a single menu and add a
comment for the rest, so the resulting config file reads more clearly.
Remove duplicate CHAIN_OF_TRUST options from
board/congatec/common/Kconfig.  Remove duplicate NXP_ESBC config
questions and move to arch/Kconfig.nxp.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SYS_FSL_SFP_BE et al to Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:40 +0000 (14:04 -0400)]
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig

This converts the following to Kconfig:
   CONFIG_KEY_REVOCATION
   CONFIG_SYS_FSL_SFP_BE
   CONFIG_SYS_FSL_SFP_LE
   CONFIG_SYS_FSL_SFP_VER_3_0
   CONFIG_SYS_FSL_SFP_VER_3_2
   CONFIG_SYS_FSL_SFP_VER_3_4
   CONFIG_SYS_FSL_SRK_LE

This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for
when CHAIN_OF_TRUST is enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SYS_FSL_SEC_MON et al to Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:39 +0000 (14:04 -0400)]
Convert CONFIG_SYS_FSL_SEC_MON et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_FSL_SEC_MON
   CONFIG_SYS_FSL_SEC_MON_BE
   CONFIG_SYS_FSL_SEC_MON_LE

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_ESDHC_DETECT_QUIRK to Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:38 +0000 (14:04 -0400)]
Convert CONFIG_ESDHC_DETECT_QUIRK to Kconfig

This converts the following to Kconfig:
   CONFIG_ESDHC_DETECT_QUIRK

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_ESBC_HDR_LS et al to Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:37 +0000 (14:04 -0400)]
Convert CONFIG_ESBC_HDR_LS et al to Kconfig

This converts the following to Kconfig:
   CONFIG_ESBC_HDR_LS
   CONFIG_ESBC_ADDR_64BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agonxp: Rename board/freescale/common/Kconfig to arch/Kconfig.nxp
Tom Rini [Thu, 16 Jun 2022 18:04:36 +0000 (14:04 -0400)]
nxp: Rename board/freescale/common/Kconfig to arch/Kconfig.nxp

Now that board/freescale/common/Kconfig is safe to be included once,
globally, rename this to arch/Kconfig.nxp to better reflect that it
contains options that are valid on multiple architectures and SoC
families, and not specific to NXP reference platforms either.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agonxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:35 +0000 (14:04 -0400)]
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig

The way that we use this file currently means that we have to guard it
in every platform Kconfig.  But it is also required in all NXP
platforms, including non-reference platforms.  Make all options in it
have appropriate dependencies so that we can include it a single time
under arch/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_HETROGENOUS_CLUSTERS et al to Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:34 +0000 (14:04 -0400)]
Convert CONFIG_HETROGENOUS_CLUSTERS et al to Kconfig

This converts the following to Kconfig:
   CONFIG_HETROGENOUS_CLUSTERS
   CONFIG_SYS_MAPLE
   CONFIG_SYS_CPRI
   CONFIG_PPC_CLUSTER_START
   CONFIG_DSP_CLUSTER_START
   CONFIG_SYS_CPRI_CLK
   CONFIG_SYS_ULB_CLK
   CONFIG_SYS_ETVPE_CLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_EXTRA_CLOCK to Kconfig
Tom Rini [Thu, 16 Jun 2022 18:04:33 +0000 (14:04 -0400)]
Convert CONFIG_EXTRA_CLOCK to Kconfig

This converts the following to Kconfig:
   CONFIG_EXTRA_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SYS_DDR_RAW_TIMING to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:55 +0000 (12:03 -0400)]
Convert CONFIG_SYS_DDR_RAW_TIMING to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_DDR_RAW_TIMING

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SYS_SPD_BUS_NUM to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:54 +0000 (12:03 -0400)]
Convert CONFIG_SYS_SPD_BUS_NUM to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_SPD_BUS_NUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:53 +0000 (12:03 -0400)]
Convert CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR to Kconfig

This converts the following to Kconfig:
   CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_USB_GADGET_DWC2_OTG_PHY to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:52 +0000 (12:03 -0400)]
Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to Kconfig

This converts the following to Kconfig:
   CONFIG_USB_GADGET_DWC2_OTG_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_USE_ONENAND_BOARD_INIT to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:51 +0000 (12:03 -0400)]
Convert CONFIG_USE_ONENAND_BOARD_INIT to Kconfig

This converts the following to Kconfig:
   CONFIG_USE_ONENAND_BOARD_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SAMSUNG_ONENAND to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:50 +0000 (12:03 -0400)]
Convert CONFIG_SAMSUNG_ONENAND to Kconfig

This converts the following to Kconfig:
   CONFIG_SAMSUNG_ONENAND

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2 years agoRename CONFIG_PWM to CONFIG_PWM_S5P and move to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:49 +0000 (12:03 -0400)]
Rename CONFIG_PWM to CONFIG_PWM_S5P and move to Kconfig

We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to
Kconfig.  Given the usage of CONFIG_PWM_NX, we have that select this new
symbol.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2 years agosmdkc100: Remove some unused options
Tom Rini [Wed, 15 Jun 2022 16:03:48 +0000 (12:03 -0400)]
smdkc100: Remove some unused options

There are a few options we test and set and then never reference, remove
them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agonxp: Cleanup some emulator related options.
Tom Rini [Wed, 15 Jun 2022 16:03:47 +0000 (12:03 -0400)]
nxp: Cleanup some emulator related options.

- Drop the emulator CONFIG test from include/configs/ls1088ardb.h
- Migrate CONFIG_SYS_FSL_DDR_EMU to a select'able option in
  drivers/ddr/fsl/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agowatchdog: designware: Make this depend on WDT
Tom Rini [Wed, 15 Jun 2022 16:03:46 +0000 (12:03 -0400)]
watchdog: designware: Make this depend on WDT

As this driver can dynamically determine the values set in
CONFIG_DW_WDT_BASE when using WDT, so make this depend on WDT rather
than migrate CONFIG_DW_WDT_BASE to Kconfig.

Cc: Chee Tien Fong <tien.fong.chee@intel.com>
Cc: Chin-Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinh.nguyen@intel.com>
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Stefan Roese <sr@denx.de>
Cc: hee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2 years agoConvert CONFIG_ENABLE_36BIT_PHYS to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:45 +0000 (12:03 -0400)]
Convert CONFIG_ENABLE_36BIT_PHYS to Kconfig

This converts the following to Kconfig:
   CONFIG_ENABLE_36BIT_PHYS

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agonet: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBL
Tom Rini [Wed, 15 Jun 2022 16:03:44 +0000 (12:03 -0400)]
net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBL

This value is always used at the default, rename it for now.  This
likely should come from the device tree if non-default, moving forward.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_DW_ALTDESCRIPTOR to Kconfig
Tom Rini [Wed, 15 Jun 2022 16:03:43 +0000 (12:03 -0400)]
Convert CONFIG_DW_ALTDESCRIPTOR to Kconfig

This converts the following to Kconfig:
   CONFIG_DW_ALTDESCRIPTOR

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoMerge tag 'fsl-qoriq-2022-7-3' of https://source.denx.de/u-boot/custodians/u-boot...
Tom Rini [Tue, 5 Jul 2022 01:30:23 +0000 (21:30 -0400)]
Merge tag 'fsl-qoriq-2022-7-3' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next

Several patches from Pali
 - fsl_elbc detection fix
 - sort p2020 dts node, drop duplicated node
 - p1_p2_rdb_pc board cleanup
 - simplify mpc85xx _start_cont jumping code

2 years agopowerpc: mpc85xx: Simplify jump to _start_cont in flash code
Pali Rohár [Tue, 28 Jun 2022 15:54:00 +0000 (17:54 +0200)]
powerpc: mpc85xx: Simplify jump to _start_cont in flash code

After more patches code for jumping to _start_cont symbol in flash memory
involved to code with useless mathematical operations. Currently it does:

  r3 := CONFIG_SYS_MONITOR_BASE + ABS(_start_cont) - CONFIG_SYS_MONITOR_BASE
  jump to r3

Which is equivalent of just:

  r3 := ABS(_start_cont)
  jump to r3

The purpose of that code is just to jump to _start_code symbol,
independently of program counter. So branch must be done to absolute
address. Trying to write:

  ba _start_cont

just cause linker error:

    LD      u-boot
  powerpc-linux-gnuspe-ld.bfd: arch/powerpc/cpu/mpc85xx/start.o: in function `switch_as':
  (.bootpg+0x4b8): relocation truncated to fit: R_PPC_ADDR24 against symbol `_start_cont' defined in .text section in arch/powerpc/cpu/mpc85xx/start.o
  make: *** [Makefile:1801: u-boot] Error 1

Probably by the fact that absolute address cannot be expressed by 24-bits.
So write the code via mtlr+blr pattern as it was before and load general
purpose register with absolute address of the symbol:

  lis     r3,_start_cont@h
  ori     r3,r3,_start_cont@l
  mtlr    r3
  blr

Seems that gcc and gnu ld linker support symbol@h and symbol@l syntax like
number@h and number@l without any problem. And disassembling of compiler
u-boot binary proved that lis+ori instructions are called with numbers
which represent halves of absolute address of _start_cont symbol.

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agoboard: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card
Pali Rohár [Thu, 23 Jun 2022 16:22:21 +0000 (18:22 +0200)]
board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card

From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card,
Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards.

So address mapping for TDM-PMC card on LBC should not be enabled on any
other P1/P2 RDB board as there is no device at that TDM-PMC address.

Support for P1021RDB and P1025RDB boards was already removed from mainline
U-Boot in commits 6d1dd76afe85 ("board/freescale: Remove P1021RDB board
support") and d521cece5adb ("board/freescale: Remove P1025RDB board
support").

So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and
remove all macros related to TDM-PMC address mappings.

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agoboard: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro
Pali Rohár [Thu, 23 Jun 2022 13:25:36 +0000 (15:25 +0200)]
board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro

Add #ifdef guard for __SW_BOOT_SD macro like there are guards for all other
__SW_BOOT_* macros.

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agoboard: freescale: p1_p2_rdb_pc: Allow to compile without BOARD_NAME
Pali Rohár [Thu, 23 Jun 2022 13:18:52 +0000 (15:18 +0200)]
board: freescale: p1_p2_rdb_pc: Allow to compile without BOARD_NAME

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agopowerpc: dts: p2020: Remove duplicate pic@40000 node
Pali Rohár [Thu, 23 Jun 2022 12:39:04 +0000 (14:39 +0200)]
powerpc: dts: p2020: Remove duplicate pic@40000 node

DT node pic@40000 is defined explicitly in p2020-post.dtsi file and also
transitionally via include file pq3-mpic.dtsi. Remove duplicate definition
from p2020-post.dtsi.

No change in final DTB file.

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agopowerpc: dts: p2020: Sort DT nodes by their addresses
Pali Rohár [Thu, 23 Jun 2022 12:39:03 +0000 (14:39 +0200)]
powerpc: dts: p2020: Sort DT nodes by their addresses

No functional change.

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agomtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc...
Pali Rohár [Mon, 20 Jun 2022 11:07:03 +0000 (13:07 +0200)]
mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode

ecc.mode is set to 0 (aliased to NAND_ECC_NONE) either when function
nand_scan_ident() has not selected ecc.mode or when it selected it to none
ecc mode.

Distinguish between these two states by checking of node property
"nand-ecc-mode" which function nand_scan_ident() uses for filling ecc.mode.

This change fixes usage of none ecc mode if it is specified in DTS file.

Fixes: c9ea9019c5aa ("mtd: rawnand: fsl_elbc: Use ECC configuration from device tree")
Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agoMerge tag 'u-boot-at91-2022.10-a' of https://source.denx.de/u-boot/custodians/u-boot...
Tom Rini [Thu, 30 Jun 2022 19:21:52 +0000 (15:21 -0400)]
Merge tag 'u-boot-at91-2022.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2022.10 cycle:

This feature set includes mostly fixes and alignments: DT alignment with
Linux for sama7g5, removal of invalid eeprom compatibles, removal of
extra debug_uart_init calls for all at91 boards, support for pio4 driver
pioE bank, and other minor fixes and enhancements for sam9x60 and
sama5d2_icp boards.

2 years agoMerge tag 'versal-qspi-for-v2022.10' of https://gitlab.denx.de/u-boot/custodians...
Tom Rini [Thu, 30 Jun 2022 13:32:15 +0000 (09:32 -0400)]
Merge tag 'versal-qspi-for-v2022.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Versal QSPI/OSPI changes for v2022.10

- Add new flash types
- Add cadence ospi driver for Xilinx Versal

2 years agogpio: atmel_pio4: add support for PIO_PORTE
Mihai Sain [Wed, 25 May 2022 10:32:08 +0000 (13:32 +0300)]
gpio: atmel_pio4: add support for PIO_PORTE

Add support for gpio PORT E, which is available on e.g. sama7g5 SoC.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2 years agoMerge branch '2022-06-28-Kconfig-migrations' into next
Tom Rini [Wed, 29 Jun 2022 13:54:02 +0000 (09:54 -0400)]
Merge branch '2022-06-28-Kconfig-migrations' into next

- Convert a large number of CONFIG symbols to Kconfig.  Of note is a
  large chunk of USB symbols (and dead code removal), ensuring all
  SPL/TPL/VPL symbols have an appropriate dependency, largely (but not
  entirely) removing the testing of CONFIG_SPL_BUILD in board headers,
  and allowing CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS to
  co-exist as this facilities migration of many platforms.

2 years agospi: cadence-qspi: Fix programming ospi flash speed
T Karthik Reddy [Thu, 12 May 2022 10:05:35 +0000 (04:05 -0600)]
spi: cadence-qspi: Fix programming ospi flash speed

When the requested flash speed is 0, the baudrate division for the
requested speed causing drop in the performance. So set the ospi flash
to operate at max frequency when requested speed is zero.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-6-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2 years agospi: cadence_qspi: Enable apb linear mode for apb read & write operations
T Karthik Reddy [Thu, 12 May 2022 10:05:34 +0000 (04:05 -0600)]
spi: cadence_qspi: Enable apb linear mode for apb read & write operations

On versal platform, enable apb linear mode for apb read and write
execute operations amd disable it when using dma reads. This is done by
xilinx_pm_request() secure calls when CONFIG_ZYNQMP_FIRMWARE is enabled,
else we use direct raw reads and writes in case of mini U-Boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-5-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2 years agospi: cadence-qspi: reset qspi flash for versal platform
T Karthik Reddy [Thu, 12 May 2022 10:05:33 +0000 (04:05 -0600)]
spi: cadence-qspi: reset qspi flash for versal platform

When flash operated at non default mode like DDR, flash need to be reset
to operate in SDR mode to read flash ids by spi-nor framework. Reset the
flash to the default state before using the flash. This reset is handled
by a gpio driver, in case of mini U-Boot as gpio driver is disabled, we
do raw read and write access by the registers.
Versal platform utilizes spi calibration for read delay programming, so
incase by default read delay property is set in DT. We make sure not to
use read delay from DT by overwriting read_delay with -1.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-4-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2 years agoarm64: versal: Add versal specific cadence ospi driver
T Karthik Reddy [Thu, 12 May 2022 10:05:32 +0000 (04:05 -0600)]
arm64: versal: Add versal specific cadence ospi driver

Add support for cadence ospi driver for Versal platform. This driver
provides support for DMA read operation which utilizes cadence qspi
driver.
If "cdns,is-dma" DT property is specified use dma for read operation
from cadence_qspi driver. As cadence_qspi_apb_dma_read() is defined in
cadence_ospi_versal driver add a weak function defination in
cadence_qspi driver.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-3-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2 years agospi: cadence-qspi: move cadence qspi macros to header file
T Karthik Reddy [Thu, 12 May 2022 10:05:31 +0000 (04:05 -0600)]
spi: cadence-qspi: move cadence qspi macros to header file

Move all the cadence macros from cadence_qspi_apb.c to cadence_qspi.h
file.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-2-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2 years agomtd: spi-nor-ids: Add support for flashes tested by xilinx
Ashok Reddy Soma [Wed, 25 May 2022 05:17:12 +0000 (10:47 +0530)]
mtd: spi-nor-ids: Add support for flashes tested by xilinx

Add support for various flashes from below manufacturers which are tested
by xilinx for years.

EON:
en25q128b
GIGA:
gd25lx256e
ISSI:
is25lp008
is25lp016
is25lp01g
is25wp008
is25wp016
is25wp01g
is25wx256
MACRONIX:
mx25u51245f
mx66u1g45g
mx66l2g45g
MICRON:
mt35xl512aba
mt35xu01g
SPANSION:
s70fs01gs_256k
SST:
sst26wf016b
WINBOND:
w25q16dw
w25q16jv
w25q512jv
w25q32bv
w25h02jv

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/1653455832-14763-1-git-send-email-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2 years agogw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXT
Tom Rini [Tue, 14 Jun 2022 02:57:37 +0000 (22:57 -0400)]
gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXT

Move the environment text over from being set via
CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over
to plain text in board/gateworks/gw_ventana/gw_ventana.env.  This lets
us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a
single environment file now.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2 years agoComplete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment
Tom Rini [Tue, 14 Jun 2022 02:57:36 +0000 (22:57 -0400)]
Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment

- Ensure that everyone setting mtdids= and mtdparts= is doing so via the
  CONFIG options.
- If the CONFIG options are set, ensure that the default environment
  sets mtdparts / mtdids.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoRename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOAD
Tom Rini [Tue, 14 Jun 2022 02:57:35 +0000 (22:57 -0400)]
Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOAD

The "autoload" environment variable is always checked with env_get_yesno
as it can be set to any form of no.  The default behavior of
env_get_yesno is to return -1 on variables that are not set, which acts
as true in general (we test for non-zero return).  To convert
CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to
set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for
consistency sake.  Then, make it so that if enabled we set autoload=0 in
the default environment.  Migrate all platforms which set
CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their
default environment to using CONFIG_SYS_DISABLE_AUTOLOAD

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoopos6uldev: Migrate to using CONFIG_EXTRA_ENV_TEXT
Tom Rini [Tue, 14 Jun 2022 02:57:34 +0000 (22:57 -0400)]
opos6uldev: Migrate to using CONFIG_EXTRA_ENV_TEXT

Move the environment text over from being set via
CONFIG_EXTRA_ENV_SETTINGS in include/configs/opos6uldev.h and over to
plain text in board/armadeus/opos6uldev/opos6uldev.env.  This lets us
manage env_version without a CONFIG variable.

Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_ENV_RANGE to Kconfig
Tom Rini [Tue, 14 Jun 2022 02:57:33 +0000 (22:57 -0400)]
Convert CONFIG_ENV_RANGE to Kconfig

This converts the following to Kconfig:
   CONFIG_ENV_RANGE

Now that this is in Kconfig we can enforce a minimum size and so remove
the check in C code to ensure range is larger than size.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agodragonboard410c: Migrate to using CONFIG_EXTRA_ENV_TEXT
Tom Rini [Tue, 14 Jun 2022 02:57:32 +0000 (22:57 -0400)]
dragonboard410c: Migrate to using CONFIG_EXTRA_ENV_TEXT

With the exception of distro_boot support, we can move all of the rest
of the environment changes to come from CONFIG_EXTRA_ENV_TEXT and in
turn remove CONFIG_ENV_REFLASH.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoenv: Remove include/generated/env.* under "make clean"
Tom Rini [Tue, 14 Jun 2022 02:57:31 +0000 (22:57 -0400)]
env: Remove include/generated/env.* under "make clean"

When running "make clean" we want to remove env.in and well as env.txt.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoenv: Do not make CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS conflict
Tom Rini [Tue, 14 Jun 2022 02:57:30 +0000 (22:57 -0400)]
env: Do not make CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS conflict

Largely, the use of CONFIG_EXTRA_ENV_SETTINGS can be migrated directly
to come from CONFIG_EXTRA_ENV_TEXT.  The biggest case that cannot easily
be migrated is distro_bootcmd support.  Rather than block migration on
this, remove the #error here so that we can being moving forward.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SYS_USB_FAT_BOOT_PARTITION to Kconfig
Tom Rini [Mon, 13 Jun 2022 00:02:05 +0000 (20:02 -0400)]
Convert CONFIG_SYS_USB_FAT_BOOT_PARTITION to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_USB_FAT_BOOT_PARTITION

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig
Tom Rini [Mon, 13 Jun 2022 00:02:04 +0000 (20:02 -0400)]
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig

This converts the following to Kconfig:
   CONFIG_USB_MAX_CONTROLLER_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agocommon: usb: Update logic for usb.o, usb_hub.o and usb_storage.o
Tom Rini [Mon, 13 Jun 2022 00:02:03 +0000 (20:02 -0400)]
common: usb: Update logic for usb.o, usb_hub.o and usb_storage.o

Now that we have consistently named symbols to enable USB host or gadget
controller support in SPL or full U-Boot, we do not need to
unconditionally build USB files nor depend on non-SPL symbols to know
when to build these common files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agomx6memcal: Remove SPL_USB_HOST
Tom Rini [Mon, 13 Jun 2022 00:02:02 +0000 (20:02 -0400)]
mx6memcal: Remove SPL_USB_HOST

As this particular platform is intended to be loaded and run a specific
set of routines in SPL, we do not need the ability to further use the
USB as a host device in SPL.  Disable this support.

Cc: Eric Nelson <eric@nelint.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Eric Nelson <eric@nelint.com>
2 years agousb: Remove non-DM code in ehci-fsl and xhci
Tom Rini [Mon, 13 Jun 2022 00:02:01 +0000 (20:02 -0400)]
usb: Remove non-DM code in ehci-fsl and xhci

The DM_USB migration deadline has passed and this is not used in SPL.
Remove this now unused code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_FPGA_STRATIX_V to Kconfig
Tom Rini [Mon, 13 Jun 2022 00:02:00 +0000 (20:02 -0400)]
Convert CONFIG_FPGA_STRATIX_V to Kconfig

This converts the following to Kconfig:
   CONFIG_FPGA_STRATIX_V

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agofpga: Remove CONFIG_FPGA_COUNT
Tom Rini [Mon, 13 Jun 2022 00:01:59 +0000 (20:01 -0400)]
fpga: Remove CONFIG_FPGA_COUNT

This define is only currently used in a single board, and always set to
one.  Define this within the board code and remove other references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_ENV_MIN_ENTRIES et al to Kconfig
Tom Rini [Mon, 13 Jun 2022 00:01:58 +0000 (20:01 -0400)]
Convert CONFIG_ENV_MIN_ENTRIES et al to Kconfig

This converts the following to Kconfig:
   CONFIG_ENV_MIN_ENTRIES
   CONFIG_ENV_MAX_ENTRIES

Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoGlobally remove most CONFIG_SPL_BUILD tests from config headers
Tom Rini [Sat, 11 Jun 2022 02:59:38 +0000 (22:59 -0400)]
Globally remove most CONFIG_SPL_BUILD tests from config headers

With the exception of how PowerPC handles SPL and TPL (which has its own
issues), we cannot safely hide options under CONFIG_SPL_BUILD.  Largely
remove the places that have this test today.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig
Tom Rini [Sat, 11 Jun 2022 02:59:37 +0000 (22:59 -0400)]
Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_MPC85XX_NO_RESETVEC

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoRemove CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE and CONFIG_SPL_ABORT_ON_RAW_IMAGE
Tom Rini [Sat, 11 Jun 2022 02:59:36 +0000 (22:59 -0400)]
Remove CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE and CONFIG_SPL_ABORT_ON_RAW_IMAGE

These symbols do not exist in mainline, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agosiemens: Move CONFIG_FACTORYSET to Kconfig
Tom Rini [Sat, 11 Jun 2022 02:59:35 +0000 (22:59 -0400)]
siemens: Move CONFIG_FACTORYSET to Kconfig

Introduce board/siemens/common/Kconfig and have it hold FACTORYSET to
start with.  Use select for this on the boards that need it.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agovideo: Migrate exynos display options to Kconfig
Tom Rini [Sat, 11 Jun 2022 02:59:34 +0000 (22:59 -0400)]
video: Migrate exynos display options to Kconfig

Following how it's done for the majority of drivers, add a new
VIDEO_EXYNOS option and Kconfig file under drivers/video/exynos and list
the current options there.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2 years agoarm: samsung: Migrate a number of symbols to Kconfig
Tom Rini [Sat, 11 Jun 2022 02:59:33 +0000 (22:59 -0400)]
arm: samsung: Migrate a number of symbols to Kconfig

- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than
  CONFIG_EXYNOS[45]
- In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX
- Migrate specific SoC CONFIG values to Kconfig
- Use CONFIG_TARGET_x rather than CONFIG_x
- Migrate other CONFIG_EXYNOS_x symbols to Kconfig
- Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE
- Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest
  of U-Boot usage.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoarm: exynos: Remove old pwm backlight driver
Tom Rini [Sat, 11 Jun 2022 02:59:32 +0000 (22:59 -0400)]
arm: exynos: Remove old pwm backlight driver

Remove the unused older exynos pwm backlight driver.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2 years agoarm: samsung: Remove dead LCD code
Tom Rini [Sat, 11 Jun 2022 02:59:31 +0000 (22:59 -0400)]
arm: samsung: Remove dead LCD code

Since bb5930d5c97f ("exynos: video: Convert several boards to driver
model for video") there have been no callers of any of the exynos_lcd_*
family of functions.  Remove these from the boards, and then remove
unused logo and related code as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2 years agoblock: ide: Remove ide_preinit function
Tom Rini [Sat, 11 Jun 2022 02:59:30 +0000 (22:59 -0400)]
block: ide: Remove ide_preinit function

The only platform currently that defines an ide_preinit function has an
empty one that immediately returns.  Remove this hook.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoata: sata_sil: Remove useless BLK guard in sata_sil.h
Tom Rini [Sat, 11 Jun 2022 02:59:29 +0000 (22:59 -0400)]
ata: sata_sil: Remove useless BLK guard in sata_sil.h

Now that the driver only supports CONFIG_BLK, remove the useless guard
in sata_sil.h.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_LBA48 et al to Kconfig
Tom Rini [Sat, 11 Jun 2022 02:59:28 +0000 (22:59 -0400)]
Convert CONFIG_LBA48 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_LBA48
   CONFIG_SYS_64BIT_LBA

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_FSL_SATA_V2 to Kconfig
Tom Rini [Sat, 11 Jun 2022 02:59:27 +0000 (22:59 -0400)]
Convert CONFIG_FSL_SATA_V2 to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_SATA_V2

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoata: fsl_sata: Remove legacy non-BLK code
Tom Rini [Sat, 11 Jun 2022 02:59:26 +0000 (22:59 -0400)]
ata: fsl_sata: Remove legacy non-BLK code

The migration deadline for this has passed and all boards have been
updated, remove this legacy code and references for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoata: dwc_ahsata: Remove legacy non-CONFIG_AHCI code
Tom Rini [Sat, 11 Jun 2022 02:59:25 +0000 (22:59 -0400)]
ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI code

The migration deadline for this has passed and all boards have been
updated, remove this legacy code and references for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoxtensa: Switch to using CONFIG_XTENSA for building device trees
Tom Rini [Sat, 11 Jun 2022 02:59:24 +0000 (22:59 -0400)]
xtensa: Switch to using CONFIG_XTENSA for building device trees

The only use of CONFIG_XTFPGA was to build all of the in-tree device
trees.  Switch to using CONFIG_XTENSA instead of a non-Kconfig symbol.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agovpl: Ensure all VPL symbols in Kconfig have some VPL dependency
Tom Rini [Wed, 8 Jun 2022 12:24:40 +0000 (08:24 -0400)]
vpl: Ensure all VPL symbols in Kconfig have some VPL dependency

Tighten up symbol dependencies in a number of places.  Ensure that a VPL
specific option has at least a direct dependency on VPL.  In places
where it's clear that we depend on something more specific, use that
dependency instead.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agotpl: Ensure all TPL symbols in Kconfig have some TPL dependency
Tom Rini [Wed, 8 Jun 2022 12:24:39 +0000 (08:24 -0400)]
tpl: Ensure all TPL symbols in Kconfig have some TPL dependency

Tighten up symbol dependencies in a number of places.  Ensure that a TPL
specific option has at least a direct dependency on TPL.  In places
where it's clear that we depend on something more specific, use that
dependency instead.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agospl: Move SPL_LDSCRIPT defaults to one place
Tom Rini [Wed, 8 Jun 2022 12:24:37 +0000 (08:24 -0400)]
spl: Move SPL_LDSCRIPT defaults to one place

We want to keep all of the default values for SPL_LDSCRIPT in the same
place both for overall clarity as well as not polluting unrelated config
files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agousb: ehci-mx5: Remove non-DM code
Tom Rini [Wed, 8 Jun 2022 12:24:36 +0000 (08:24 -0400)]
usb: ehci-mx5: Remove non-DM code

The deadline for DM_USB migration has passed and all users have been
migrated.  Remove now unused code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agousb: ehci-mxc: Remove
Tom Rini [Wed, 8 Jun 2022 12:24:35 +0000 (08:24 -0400)]
usb: ehci-mxc: Remove

There are no platforms enabling this driver, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoPowerPC: Remove some unused USB code
Tom Rini [Wed, 8 Jun 2022 12:24:34 +0000 (08:24 -0400)]
PowerPC: Remove some unused USB code

These particular code paths aren't used anymore, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_TEGRA_GPU to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:33 +0000 (08:24 -0400)]
Convert CONFIG_TEGRA_GPU to Kconfig

This converts the following to Kconfig:
   CONFIG_TEGRA_GPU

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agousb: xhci-fsl: Remove non-DM code
Tom Rini [Wed, 8 Jun 2022 12:24:32 +0000 (08:24 -0400)]
usb: xhci-fsl: Remove non-DM code

The deadline for DM_USB migration has passed and all users have been
migrated.  Remove now unused code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:31 +0000 (08:24 -0400)]
Convert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig

This converts the following to Kconfig:
   CONFIG_USB_EHCI_TXFIFO_THRESH

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agousb: ehci-fsl: Remove non-DM code
Tom Rini [Wed, 8 Jun 2022 12:24:30 +0000 (08:24 -0400)]
usb: ehci-fsl: Remove non-DM code

The deadline for DM_USB migration has passed and all users have been
migrated.  Remove now unused code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_HAS_FSL_DR_USB to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:28 +0000 (08:24 -0400)]
Convert CONFIG_HAS_FSL_DR_USB to Kconfig

This converts the following to Kconfig:
   CONFIG_HAS_FSL_DR_USB

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:27 +0000 (08:24 -0400)]
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig

This converts the following to Kconfig:
   CONFIG_EHCI_HCD_INIT_AFTER_RESET

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:26 +0000 (08:24 -0400)]
Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig

This converts the following to Kconfig:
   CONFIG_EHCI_DESC_BIG_ENDIAN
   CONFIG_EHCI_MMIO_BIG_ENDIAN

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoehci-mxs: Remove non-DM code
Tom Rini [Wed, 8 Jun 2022 12:24:25 +0000 (08:24 -0400)]
ehci-mxs: Remove non-DM code

This code is not enabled anywhere, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_EFLASH_PROTSECTORS to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:24 +0000 (08:24 -0400)]
Convert CONFIG_EFLASH_PROTSECTORS to Kconfig

This converts the following to Kconfig:
   CONFIG_EFLASH_PROTSECTORS

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoConvert CONFIG_E1000_NO_NVM to Kconfig
Tom Rini [Wed, 8 Jun 2022 12:24:23 +0000 (08:24 -0400)]
Convert CONFIG_E1000_NO_NVM to Kconfig

This converts the following to Kconfig:
   CONFIG_E1000_NO_NVM

Signed-off-by: Tom Rini <trini@konsulko.com>
2 years agoMerge branch '2022-06-28-mpc85xx-and-aspeed-fixes' into next
Tom Rini [Tue, 28 Jun 2022 14:52:00 +0000 (10:52 -0400)]
Merge branch '2022-06-28-mpc85xx-and-aspeed-fixes' into next

- Merge a PowerPC MPC85xx cleanup / fix, and aspeed linker fix

2 years agoaspeed/ast2600: Fix SPL linker script
Joel Stanley [Tue, 28 Jun 2022 04:27:25 +0000 (13:57 +0930)]
aspeed/ast2600: Fix SPL linker script

The commit 99e2fbcb69f0 ("linker_lists: Rename sections to remove .
prefix") changed the name of the linker list sections. As the Aspeed SPL
linker wasn't in the tree yet, it missed the change.

This updates the SPL linker to match arch/arm/cpu/u-boot-spl.lds which
Aspeed was copied from.

Fixes: 442a69c14375 ("configs: ast2600: Move SPL bss section to DRAM space")
Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years agopowerpc: mpc85xx: Set TEXT_BASE addresses to real base values
Pali Rohár [Thu, 16 Jun 2022 12:19:44 +0000 (14:19 +0200)]
powerpc: mpc85xx: Set TEXT_BASE addresses to real base values

Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are
manually increased by 0x1000 due to .bootpg section. This section has size
of 0x1000 bytes and is manually put by linker script before .text section
(and therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is
set. Due to this fact lot of other config options are manually increased by
0x1000 value to make correct layout. Note that entry point is not on
CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address
CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image).

Cleanup handling of .bootpg section when CONFIG_SYS_MPC85XX_NO_RESETVEC is
set. Put .bootpg code directly into .text section and move text base
address to the start of .bootpg code. And finally remove +0x1000 value from
lot of config options. With this removal custom PHDRS is not used anymore,
so remove it too.

After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at
address -0x1000 anymore.

Tested on P2020 board with SPL and proper U-Boot.

Signed-off-by: Pali Rohár <pali@kernel.org>
2 years agoboard: atmel: remove calls to debug_uart_init
Eugen Hristev [Wed, 8 Jun 2022 14:49:29 +0000 (17:49 +0300)]
board: atmel: remove calls to debug_uart_init

Since 0dba45864b ("arm: Init the debug UART") ,
the debug_uart_init is now called from crt.S

It's no longer required to call it from the board file.

With the current code, the banned <debug_uart> is printed twice:

<debug_uart>

<debug_uart>

U-Boot 2022.07-rc4-00089-gee3d158fa8 (Jun 08 2022 - 17:39:29 +0300)

Remove all calls from board_early_init_f .

Suggested-by: Balamanikandan Gunasundar <Balamanikandan.Gunasundar@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2 years agoARM: dts: at91: sam9x60ek: fix eeprom compatible
Eugen Hristev [Thu, 26 May 2022 14:04:56 +0000 (17:04 +0300)]
ARM: dts: at91: sam9x60ek: fix eeprom compatible

The memory on this board is microchip 24aa025e48 which is compatible with
at24c02 with a page size of 16.
Fix the compatible accordingly.

Reported-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2 years agomisc: i2c_eeprom: remove 24aa02e48
Eugen Hristev [Thu, 26 May 2022 14:04:55 +0000 (17:04 +0300)]
misc: i2c_eeprom: remove 24aa02e48

This compatible does not exist in the bindings.
All occurences in DT have been replaced by at24c02 which is equivalent.

Fixes: 7264066707 ("misc: i2c_eeprom: Add compatible for 24AA02E48")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>
2 years agoARM: dts: at91: replace microchip, 24aa02e48 with atmel, at24c02
Eugen Hristev [Thu, 26 May 2022 14:04:54 +0000 (17:04 +0300)]
ARM: dts: at91: replace microchip, 24aa02e48 with atmel, at24c02

microchip,24aa025e48 does not exist in the bindings of this driver.
It can be replaced with atmel,at24c02 which is a standard compatible
and the memory is compatible with this one, depending on the page size.
microchip 24aa02e48 has a page size of 8, while 24aa025e48 has a page
size of 16 bytes.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>