Zhao Yakui [Thu, 10 Jan 2013 07:25:24 +0000 (15:25 +0800)]
Add the bidirectional MVP to optimize the VME parameter on Ivb
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Thu, 10 Jan 2013 07:25:24 +0000 (15:25 +0800)]
Use the scoreboard for AVC encoding on Ivy
This is backported from the Haswell and it is required in order to
add the MVP prediction as it is based on the neighbour macroblocks.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Thu, 10 Jan 2013 07:25:24 +0000 (15:25 +0800)]
Backport the mode/mv cost table on Ivy
Add the implement on Haswell for Ivy. Then it can select the different
predition mode based on the quality requirement.
Signedo-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Thu, 10 Jan 2013 07:25:24 +0000 (15:25 +0800)]
Add the VME shader for Ivy that supports MVP
This is to optimize the VME parameter for Ivy, which is backported
from Haswell.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Thu, 10 Jan 2013 07:25:24 +0000 (15:25 +0800)]
Add the separated encoding files for Ivy
This is to do the prepration of backing port the Haswell VME motion vector
prediction for Ivy.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Yakui Zhao [Thu, 10 Jan 2013 01:22:23 +0000 (09:22 +0800)]
Remove the intermediate file of mpeg2_inter_frame.gen7.asm as it is generated from compiling the shader.
Zhao Yakui [Wed, 9 Jan 2013 04:30:04 +0000 (12:30 +0800)]
Fix one compiling warning of floor implicit definition
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 9 Jan 2013 04:29:59 +0000 (12:29 +0800)]
Fix the error of reading neighbour macroblock pixels during VME prediction on Snb/Ivy
Otherwise the incorrect result of VME prediction is used.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Li Xiaowei [Sun, 6 Jan 2013 07:17:59 +0000 (15:17 +0800)]
VPP: Support multi filters for vebox pipeline
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Sat, 5 Jan 2013 03:02:18 +0000 (11:02 +0800)]
VEBOX: clean supported fourcc format in VPP pipeline
clean up the supported surface format at the begining
and the ending of post processing pipepile, these formats
will be convertd to/from vebox supported formats.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Sat, 5 Jan 2013 02:21:49 +0000 (10:21 +0800)]
VEBOX: update filters info for every frame processing
filter parameters may alter when processing a video sequence,
so keep updating filters information before handing each frame.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Fri, 4 Jan 2013 09:21:03 +0000 (17:21 +0800)]
VEBOX: support multi color balance params in one filter
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Zhao Yakui [Fri, 28 Dec 2012 08:30:57 +0000 (16:30 +0800)]
Adjust the reference window based on MVP prediction to optimize VME param on Haswell
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Fri, 28 Dec 2012 08:30:50 +0000 (16:30 +0800)]
Add the bidirectional MV prediction for B-frame on Haswell
Now the B-frame only supports the forward prediction. In order to
get the better prediction result, the bidirection prediction is added
for B-frame. At the same time the MV prediction is also added.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Thu, 27 Dec 2012 02:59:50 +0000 (10:59 +0800)]
Remove the preprocessor redefinitions for H264 and MPEG2 on Haswell
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Li Xiaowei [Tue, 25 Dec 2012 07:59:54 +0000 (15:59 +0800)]
Packing the Intra macroblock in P/B slice for MPEG2
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Fri, 21 Dec 2012 02:51:33 +0000 (10:51 +0800)]
Enable MPEG2 encoding flag for gen7 codec info
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Fri, 21 Dec 2012 09:00:27 +0000 (17:00 +0800)]
Avoid intra VME for MPEG2
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Fri, 21 Dec 2012 02:47:12 +0000 (10:47 +0800)]
Add MPEG2 MFC pipeline for IVB
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Fri, 21 Dec 2012 01:40:23 +0000 (09:40 +0800)]
Add MPEG2 VME pipeline for IVB
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li Xiaowei [Fri, 21 Dec 2012 06:27:01 +0000 (14:27 +0800)]
Add MPEG2 VME shader files for IVB
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Zhao Yakui [Mon, 24 Dec 2012 07:29:08 +0000 (15:29 +0800)]
Use the wavefront-scan instead of raster-scan during VME prediction on Haswell
When adding the MV prediction for AVC encoding, the GPU thread of current
macroblock needs to wait for the completion of neighbour macroblocks(left/top/up-right).
And the raster-scan will degrade the performance of AVC encoding. So the
wavefront-scan is used to spanw GPU thread, which can avoid the degrading of
the encoding performance.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 24 Dec 2012 07:08:39 +0000 (15:08 +0800)]
Add the MV prediction to optimize VME parameter on Haswell
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 24 Dec 2012 07:08:29 +0000 (15:08 +0800)]
Discard the intermediate result during VME prediction on haswell
There is no functional change. It is only to avoid writing the
intermediate result of VME prediction.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 24 Dec 2012 07:08:25 +0000 (15:08 +0800)]
MEDIA_OBJECT uses hardware scoreboard during VME prediction on Haswell
To get the precise VME prediction the current macroblock will depend on its
neighbour mb(left, top, up-right). So the hardware scoreboard is used
when submitting the MEDIA_OBJECT command. This is to do the preparation
of adding MV prediction in VME prediction.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Xiang, Haihao [Mon, 14 Jan 2013 07:50:20 +0000 (15:50 +0800)]
Set Fix_Prev_Mb_skipped flag in AVC_BSD_OBJECT command instead of VC1_BSD_OBJECT command
A stupid error by me in the commit f750d1b
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit
88b21b9aba9be13e08109fe5d213973447f38558)
Xiang, Haihao [Wed, 9 Jan 2013 08:05:20 +0000 (16:05 +0800)]
Use the internal CondOver flag
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit
2cb319923b6ae5c1b2c643534d7a97911b9bd54e)
Xiang, Haihao [Wed, 9 Jan 2013 07:55:54 +0000 (15:55 +0800)]
Fix ttmbf/ttfrm when vstransform is 0 on HSW
This is the same fix of c7d23b1
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 9 Jan 2013 07:44:29 +0000 (15:44 +0800)]
No overlap smoothing for B frame in Main and Simple profiles
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58448
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit
660cb88ec00a896eefc9580e691d0a07fb2870ec)
Xiang, Haihao [Tue, 8 Jan 2013 02:31:43 +0000 (10:31 +0800)]
Always set Fix_Prev_Mb_skipped in AVC_BSD_OBJECT command
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57720
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit
f750d1b69e1aae65463eab224013b506481d8459)
Gwenole Beauchesne [Thu, 4 Oct 2012 08:32:32 +0000 (10:32 +0200)]
render: fix rotation vertices for Ironlake.
Ironlake requires the vertex buffer to be ordered in a particular way.
More specifically, the correct order is bottom-right, bottom-left and
top-left vertices in "output" view, i.e. transformed.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
(cherry picked from commit
dc4d4005d0f3de59b7218506cf5b20bcef61323f)
Gwenole Beauchesne [Thu, 3 Jan 2013 14:57:25 +0000 (15:57 +0100)]
subpicture: don't overallocate palette on 64-bit systems.
Allocate the exact amount of memory for VA image palettes on 64-bit
systems. No more.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Gwenole Beauchesne [Thu, 3 Jan 2013 14:47:40 +0000 (15:47 +0100)]
subpicture: fix creation of IA88/AI88 subpicture images.
IA88 format is 16bpp, with one byte for alpha and one byte for the color
index. Besides, a palette with 256 entries is also needed.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Gwenole Beauchesne [Thu, 3 Jan 2013 14:23:42 +0000 (15:23 +0100)]
subpicture: expose "global-alpha" is supported.
Make sure vaQuerySubpictureFormats() reports that "global-alpha" is
supported, along with "screen-coords".
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Xiang, Haihao [Fri, 21 Dec 2012 02:25:57 +0000 (10:25 +0800)]
Render: Update the maximum number of WM threads
The number is stolen from Mesa.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57323
Signe-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Tested-by: zaverel <zaverel@free.fr>
(cherry picked from commit
a140c632046e50a41bf75da097834fd9954b9561)
Xiang, Haihao [Fri, 21 Dec 2012 01:48:47 +0000 (09:48 +0800)]
Add IS_SNB_GT1/IS_SNB_GT2/IS_IVB_GT1/IS_IVB_GT2 and remove IS_HSW_ULT and IS_HSW_GT2_PLUS
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit
bb946b7d2c97c94ac1888195ab1d5b9c59750d23)
Xiang, Haihao [Fri, 28 Dec 2012 01:32:23 +0000 (09:32 +0800)]
Adopt the same fix used in the commit 29d73dc to HSW
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Gwenole Beauchesne [Thu, 1 Mar 2012 17:04:56 +0000 (18:04 +0100)]
h264: fix first macroblock bit offset calculation (ILK, SNB, IVB).
Fix and simplify the scan for emulation_prevention_bytes, thus avoiding
a read beyond the end of the slice data buffer. Besides, if slice_header()
bytes are needed, use dri_bo_get_subdata() instead.
HW specific changes:
- SNB: make the HW skip the emulation prevention bytes itself.
- IVB: fix MFD_AVC_BSD_OBJECT to report the actual slice data buffer size.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
(cherry picked from commit
9b7863bf49dcf8bf1de9b45ce4e986dfd1cca418)
Xiang, Haihao [Thu, 20 Dec 2012 03:13:19 +0000 (11:13 +0800)]
Fix the compile error in the previous commit
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Li Xiaowei [Wed, 19 Dec 2012 09:06:00 +0000 (17:06 +0800)]
VPP: fix the AVS steping and frame origin issue
On HSW/IVB, when the resolution of source rectangle is
not the same as src surface, or the source rectangle does
not locate at (0,0), the scaled picture is not correct,
adjust the steping size and frame origin according to the
src rectangle's location and resolution.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Li, Xiaowei A [Wed, 12 Dec 2012 02:04:37 +0000 (10:04 +0800)]
workaround to set VC1 overlap filter flag
Signed-off-by: Li,Xiaowei <xiaowei.a.li@intel.com>
Li, Xiaowei A [Wed, 12 Dec 2012 01:16:25 +0000 (09:16 +0800)]
Fill the bitplane for VC1 skip picture decoding
This is a workaround for VC1 skip picture, the corresponding
bit value in bitplane should be 1 for skip picture, but sometimes
application pass down wrong value.
Signed-off-by: Li,Xiaowei <xiaowei.a.li@intel.com>
Xiang, Haihao [Thu, 22 Nov 2012 06:26:40 +0000 (14:26 +0800)]
MPEG-2 encoding on Haswell
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Fri, 23 Nov 2012 08:32:35 +0000 (16:32 +0800)]
MPEG-2 encoding path
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Thu, 13 Dec 2012 05:39:10 +0000 (13:39 +0800)]
Fix Motion Vector
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Fri, 7 Dec 2012 05:54:37 +0000 (13:54 +0800)]
MPEG-2 encoding: Use pre deblocking output for reconstructed picture.
This avoids OLDB enabling for MPEG-2
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 5 Dec 2012 08:07:06 +0000 (16:07 +0800)]
Fixed an assertion failure
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Mon, 3 Dec 2012 05:20:16 +0000 (13:20 +0800)]
Follow the vme output to configure PAK command
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Mon, 3 Dec 2012 05:18:11 +0000 (13:18 +0800)]
Shader for MPEG-2 encoding
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Mon, 3 Dec 2012 03:16:30 +0000 (11:16 +0800)]
Fix the number of MVs for MPEG-2 encoding
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 06:27:24 +0000 (14:27 +0800)]
PAK command for inter macroblock
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 06:17:43 +0000 (14:17 +0800)]
vme for MPEG-2 on Haswell
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 05:24:00 +0000 (13:24 +0800)]
New field profile in struct intel_encoder_context
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 05:06:29 +0000 (13:06 +0800)]
gen75_vme.c: Fix some indentation
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 04:57:51 +0000 (12:57 +0800)]
Update coded_block_pattern
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 02:29:12 +0000 (10:29 +0800)]
Change the max size
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 28 Nov 2012 02:19:11 +0000 (10:19 +0800)]
Update QM/FQM matrices for MPEG-2 encoding
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Tue, 27 Nov 2012 08:13:18 +0000 (16:13 +0800)]
No emulation bytes for MPEG-2
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Tue, 27 Nov 2012 08:08:26 +0000 (16:08 +0800)]
Internal flag for the coded buffer
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Tue, 27 Nov 2012 07:49:24 +0000 (15:49 +0800)]
rename I965_CODEDBUFFER_SIZE
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Fri, 23 Nov 2012 08:49:51 +0000 (16:49 +0800)]
Insert some redunrant data around a slice
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Fri, 23 Nov 2012 08:30:40 +0000 (16:30 +0800)]
Setup MFC pipeline for MPEG-2 encoding on Haswell
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Thu, 22 Nov 2012 01:37:18 +0000 (09:37 +0800)]
Explicitly clarify features
Also simplify some MACROs
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Li,Xiaowei [Tue, 16 Oct 2012 21:43:39 +0000 (05:43 +0800)]
VPP: Add video sharpening processing feature on HSW
Video sharpening feature is implemented based on media
shared function pipeline, Y component of NV12 surface
will be sharpened.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li, Xiaowei A [Tue, 27 Nov 2012 02:28:41 +0000 (10:28 +0800)]
Fix H264 YUV400 surface render issue
All decoded frame are considered as NV12 format in driver's,
for YUV400 format senerios, we need set the chroma component
of NV12 to a constant value(0x80), otherwise the converted ARGB
from NV12 format is not correct and cause render issue.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li, Xiaowei A [Fri, 14 Dec 2012 02:05:43 +0000 (10:05 +0800)]
vc1: fix bitplane buffer size(HSW)
This fixes buffer overflow in the newly allocated Gen buffer
that holds VC-1 bitplanes.
Signed-off-by: Li,Xiaowei <xiaowei.a.li@intel.com>
Gwenole Beauchesne [Thu, 2 Feb 2012 13:42:11 +0000 (14:42 +0100)]
vc1: fix bitplane buffer size (SNB, IVB).
This fixes buffer overflow in the newly allocated Gen buffer that holds
VC-1 bitplanes.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Li,Xiaowei [Tue, 27 Nov 2012 01:08:29 +0000 (09:08 +0800)]
Render: Add four subpicture support
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Li,Xiaowei [Fri, 23 Nov 2012 07:24:26 +0000 (15:24 +0800)]
Render: Add AI88/IA88 surface foramt support for subpicture
Signed off by: Li,Xiaowei A <xiaowei.a.li@intel.com>
Li,Xiaowei [Fri, 23 Nov 2012 03:13:48 +0000 (11:13 +0800)]
Render: Add global alpha support for subpicture
Signed-off-by: Li Xiaowei A <xiaowei.a.li@intel.com>
Zhao Yakui [Thu, 13 Dec 2012 01:24:27 +0000 (09:24 +0800)]
Feed MFC PAK with correct MV of VME output on haswell
This is helpful to improve the video compress rate of H264 encoding.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 10 Dec 2012 08:29:37 +0000 (16:29 +0800)]
Adjust the mode/mv cost for VME parameter based on QP for HSW
Currently it will use the same mode/mv cost regardless of QP during VME
prediction, which causes that we get the same VME prediction. It is better
that we get the different VME prediction mode based on QP, which can be
adopted by using mode/mv cost.
Now it is only applied on HSW.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 10 Dec 2012 08:29:37 +0000 (16:29 +0800)]
Add the support of the chroma intra prediction on Haswell
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 10 Dec 2012 08:29:36 +0000 (16:29 +0800)]
Fix the corrupted macroblock for AVC encoding on HSW
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Fri, 7 Dec 2012 02:21:09 +0000 (10:21 +0800)]
Add CSC conversion between RGBX and NV12 for HSW by using AVS shader
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Fri, 7 Dec 2012 02:21:09 +0000 (10:21 +0800)]
Optimize the sampler 8x8 coefficients for AVS shader
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Fri, 7 Dec 2012 02:21:09 +0000 (10:21 +0800)]
Add the csc conversion from RGBX to NV12 on Ivy
It also applies when the source type is BGRX.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Fri, 7 Dec 2012 02:21:09 +0000 (10:21 +0800)]
Add CSC conversion from NV12 to RGBX for VPP on Ivy
It also applies to the conversion from NV12 to BGRX.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Joe Konno [Tue, 20 Nov 2012 15:42:27 +0000 (07:42 -0800)]
configure: add missing dependency to libm.
Build broke when trying to compile with expressive debug CFLAGS (-g3).
This was root-caused to the lack of the "-lm" linker flag. By adding a
simple autoconf check we ensure that libm is linked.
More specifically, recent VEBOX changes depend on cos() and sin() math
functions.
Signed-off-by: Joe Konno <joe.konno@intel.com>
(cherry picked from commit
eb39abb70886d9277cf7d5114125cb7b22e7c362)
Rob Bradford [Fri, 19 Oct 2012 17:49:56 +0000 (18:49 +0100)]
wayland: port to 1.0 protocol.
Previously some of the functions that this code relied upon were exported as
symbols from the wayland-client .so. However those are now autogenerated
instead and are thus included as static inlines in the header file. Therefore
we must recreated the desired functions using the function pointers found in
the vtable.
Also following the removal of the globals hash from the client code it is
necessary to setup a registry with a listener on it to receive the global
objects.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
(cherry picked from commit
63db874e9c924f086bcd3518cc0f3d8c6df9ecec)
Zhao Yakui [Wed, 31 Oct 2012 08:47:59 +0000 (16:47 +0800)]
Avoid the dup of gen_free_avc_surface during compile
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 31 Oct 2012 08:47:58 +0000 (16:47 +0800)]
Restrict the max MV number in MV prediction
This is to follow the level limits for MV number for the two
consecutive MBs in H264 Spec.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 31 Oct 2012 08:47:57 +0000 (16:47 +0800)]
Allow to create batchbuffer based on the expected buffer size
This is to support the 4Kx4K encoding on Haswell. Otherwise the default batch
buffer size can't hold the encoding command for 4Kx4K encoding.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 31 Oct 2012 08:47:56 +0000 (16:47 +0800)]
Remove the dup code of XXX_mfc_avc_prepare
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 31 Oct 2012 08:47:55 +0000 (16:47 +0800)]
Remove the hard coded value to suppor the 4Kx4K encoding
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 31 Oct 2012 08:47:54 +0000 (16:47 +0800)]
Fix the issue in i965_UnlockSurface to lock it next time
It uses the variable of locked_image_id to check whether one surface is locked
or not. But as the locked_image_id is not assigned correctly, it causes that
it can't lock one surface next time although it calls the vaUnlockSurfaces.
Then the libva trace log can't dump the content of decoded/
encoded surface even after adding LIBVA_TRACE_SURFACE=XXX.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Gwenole Beauchesne <gb.devel@gmail.com>
Zhao Yakui [Wed, 31 Oct 2012 08:47:53 +0000 (16:47 +0800)]
Unify the XXX_free_avc_surface for media encoding/decoding
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Gautam [Wed, 31 Oct 2012 08:47:52 +0000 (16:47 +0800)]
Fix thread issue with AVC private surafce
https://bugs.freedesktop.org/show_bug.cgi?id=55282
Signed-off-by: Gautam <manamgautam@gmail.com>
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 31 Oct 2012 08:47:51 +0000 (16:47 +0800)]
Unify the code for xxx_free_avc_surface
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Wed, 24 Oct 2012 08:47:53 +0000 (16:47 +0800)]
Make it built against the current upstream libdrm
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
(cherry picked from commit
a97403b2b9b5542aa6dd311b23b562a413abd431)
Li, Xiaowei A [Thu, 25 Oct 2012 03:28:44 +0000 (11:28 +0800)]
VEBOX: avoid allocing surface memory for vebox pipeline when external input or output surface is refered.
Signed-off-by: Li,Xiaowei A <xiaowei.a.li@intel.com>
Xiang, Haihao [Thu, 25 Oct 2012 07:09:13 +0000 (15:09 +0800)]
CSC on Haswell
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Xiang, Haihao [Thu, 25 Oct 2012 07:07:37 +0000 (15:07 +0800)]
Build VPP shaders for Haswell
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Li, Xiaowei A [Fri, 19 Oct 2012 02:05:07 +0000 (10:05 +0800)]
VEBOX: Enable vebox pipeline for video process on HSW
Basic vebox pipeline is enabled to do deinterlacing, denoising
and color balance for NV12 format surfaces.
Signed-off-by: Li,Xiaowei A <xiaowei.a.li@intel.com>
Li,Xiaowei [Thu, 23 Aug 2012 06:42:03 +0000 (14:42 +0800)]
Expose the vpp internal scaling function as an external interface for VEBOX.
Signed-off-by Li,Xiaowei <xiaowei.a.li@intel.com>
root [Thu, 18 Oct 2012 01:51:49 +0000 (09:51 +0800)]
Add special macro and command for vebox batch buffer execution.
Signed-off-by Li,Xiaowei <xiaowei.a.li@intel.com>
Xiang, Haihao [Mon, 15 Oct 2012 15:10:18 +0000 (11:10 -0400)]
Haswell: Disable Picture ID Remapping for AVC decoding
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Zhao Yakui [Mon, 24 Sep 2012 21:22:43 +0000 (17:22 -0400)]
Add the default SEI info for CBR mode
This is to add the default SEI info in CBR mode when the upper application
doesn't pass the SEI package. Otherwise when SEI is not passed for CBR mode,
it will fail in HRD test.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Mon, 24 Sep 2012 21:20:44 +0000 (17:20 -0400)]
Use the common API to write avc SPS/PPS/SEI info on SNB/IVY/HSW
This is to remove the dup code.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Zhao Yakui [Wed, 12 Sep 2012 20:31:07 +0000 (16:31 -0400)]
Handle the MFX change between A stepping and B-stepping for haswell
The A0-stepping is still covered.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>