net: phy: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: pcnet: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: netconsole: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: mvgbe: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: mcfmii: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: macb: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: ldpaa_eth: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: fsl-mc: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: fec_mxc: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: ethoc: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: eepro100: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: e1000: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: dm9000x: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: designware: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: dc2114x: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: fm: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: tsec: Remove non-DM_ETH support code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.  Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.

Signed-off-by: Tom Rini <trini@konsulko.com>

global: Remove extraneous DM_ETH imply/select

We only need to enable DM_ETH if we have a networking driver. All
networking drivers depend on DM_ETH being enabled, and their selection
ensures DM_ETH will be enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>

net: Remove extraneous dependencies

With DM_ETH being required now for all drivers, we don't need this
listed on individual drivers as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

chromebook_samus_tpl: Disable SPL networking

We don't appear to actually use networking in SPL here, disable it.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

topic_miami*: Disable networking support more fully

This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.

Cc: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>

pinecube: Disable networking support more fully

This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.

Cc: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Tom Rini <trini@konsulko.com>

LicheePi_Zero: Disable networking support more fully

This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.

Cc: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Tom Rini <trini@konsulko.com>

xenguest_arm64: Disable networking support more fully

This platform had largely disabled networking support before. More
completely disable it by turning off CONFIG_NET.

Cc: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch '2022-12-06-update-to-gcc-12-clang-14' into next

- Bring in changes to default CI to using gcc-12.2 and clang-14 for
  building.

CI: Update to gcc-12.2

- Update to gcc-12.2, and cherry-pick a fix in grub for risc-v

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

pogo_v4: Disable LTO

With gcc-12.2 we now get:
lib/zlib/inflate.c:360: undefined reference to `__gnu_thumb1_case_si'
when building this platform. This seems like some odd problem with LTO
and Thumb, but since the platform continues to link, I assume it's
within size constraints, so lets just disable LTO for now.

Cc: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: Use the WEAK assembly entry point consistently

It is a bad idea, and more modern toolchains will fail, if you declare
an assembly function to be global and then weak, instead of declaring it
weak to start with. Update assorted assembly files to use the WEAK macro
directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Pali Rohár <pali@kernel.org>

event: Re-add file paths to the tests

Now that we are enforcing dwarf-4 to be used we will have the full file
paths present.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Makefile: Enforce DWARF4 output

At this point in time, using DWARF-5 format isn't easy to do by default
with all toolchains that we support.  And relying on the implicit
default can lead to mixing 4 and 5 and then the debug info not being
useful to tools.  For now, enforce using DWARF-4 only.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

buildman: Fetch 12.2.0 toolchains by default

Update the toolchain list to be first 12.2.0 and second 11.1.0 and
that's it.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

powerpc: fix fdt_fixup_liodn_tbl_fman()

Builiding with GCC 12.2 fails:

    arch/powerpc/cpu/mpc85xx/liodn.c: In function 'fdt_fixup_liodn_tbl_fman':
    arch/powerpc/cpu/mpc85xx/liodn.c:340:35: error: the comparison will
    always evaluate as 'false' for the address of 'compat'
    will never be NULL [-Werror=address]
      340 |                 if (tbl[i].compat == NULL)
          |

Remove the superfluous check.

Fixes: 97a8d010e029 ("net/fman: Support both new and legacy FMan Compatibles")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Merge branch '2022-12-05-Kconfig-migrations-and-renames' into next

- First batch of the patches that end up with
  scripts/config_whitelist.tx being empty. Mostly migrations and a
  little bit of code removal and CFG renaming.

m68k: Rename CONFIG_WATCHDOG_TIMEOUT to CONFIG_WATCHDOG_TIMEOUT_MSECS

In practice, it is clear that the usage in m68k of
CONFIG_WATCHDOG_TIMEOUT is setting a value in milliseconds. Rename this
to the existing symbol and move to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

post: Migrate to Kconfig

We move the existing CONFIG_POST_* functionality over to CFG_POST and
then introduce CONFIG_POST to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

sandbox: Rework how SDL is enabled / disabled

Given that we can use Kconfig logic directly to see if we have a program
available on the host or not, change from passing NO_SDL to instead
controlling CONFIG_SANDBOX_SDL in Kconfig directly. Introduce
CONFIG_HOST_HAS_SDL as the way to test for sdl2-config and default
CONFIG_SANDBOX_SDL on if we have that, or not.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

scripts/config_whitelist.txt: Remove more referenced symbols

Perform some deeper investigation on the remaining symbols listed in
this file and remove more.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

net: ftmac100: Remove non-DM_ETH code

At this point all users of this driver enable DM_ETH, so remove the
legacy code paths.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

Convert CONFIG_VSC7385_ENET et al to Kconfig

This converts the following to Kconfig:
   CONFIG_VSC7385_ENET
   CONFIG_VSC9953

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_USB_GADGET_AT91 to Kconfig

This converts the following to Kconfig:
   CONFIG_USB_GADGET_AT91

Signed-off-by: Tom Rini <trini@konsulko.com>

Nokia RX-51: Migrate legacy USB device options to Kconfig

Move a number of legacy USB UDC options to Kconfig, over from the config
header.

Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_TEGRA_CLOCK_SCALING et al to Kconfig

This converts the following to Kconfig:
   CONFIG_TEGRA_CLOCK_SCALING
   CONFIG_TEGRA_LP0
   CONFIG_TEGRA_PMU

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_TPS6586X_POWER et al to Kconfig

This converts the following to Kconfig:
   CONFIG_TPS6586X_POWER
   CONFIG_TWL6030_POWER

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_SPD_EEPROM to Kconfig

This converts the following to Kconfig:
   CONFIG_SPD_EEPROM

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_SMSC_LPC47M et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SMSC_LPC47M
   CONFIG_SMSC_SIO1007

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_SH_GPIO_PFC et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SH_GPIO_PFC
   CONFIG_TMU_TIMER

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_RTC_DS1337 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_RTC_DS1337
   CONFIG_RTC_DS1337_NOOSC
   CONFIG_RTC_DS1338
   CONFIG_RTC_DS1374
   CONFIG_RTC_DS3231
   CONFIG_RTC_MC13XXX
   CONFIG_RTC_MXS
   CONFIG_RTC_PT7C4338

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_PCA953X to Kconfig

This converts the following to Kconfig:
   CONFIG_PCA953X

Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_NAND_KMETER1 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_NAND_ECC_BCH
   CONFIG_NAND_KIRKWOOD
   CONFIG_NAND_KMETER1

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_MXS_OCOTP to Kconfig

This converts the following to Kconfig:
   CONFIG_MXS_OCOTP

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: Remove unused mx27 code

We no longer have any i.MX27 platforms, remove the remaining support
code.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: samsung: Move CONFIG_MISC_COMMON to Kconfig

This option controls using board/samsung/common/misc.c, so add a Kconfig
file there as well and select it from the boards which use this
functionality.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>

arm: ls102xa: Migrate LS102XA_STREAM_ID

This symbol appears to be globally used in the architecture, select it.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: lpc32xx: Remove unused hsuart driver

This driver is not enabled in any config currently, remove it.

Cc: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

sandbox: Move CONFIG_IO_TRACE to Kconfig

This is only used on sandbox, so select it there.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_IOMUX_SHARE_CONF_REG et al to Kconfig

This converts the following to Kconfig:
   CONFIG_IOMUX_LPSR
   CONFIG_IOMUX_SHARE_CONF_REG

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_IODELAY_RECALIBRATION to Kconfig

This converts the following to Kconfig:
   CONFIG_IODELAY_RECALIBRATION

Signed-off-by: Tom Rini <trini@konsulko.com>

mpc8548cds: Migrate CONFIG_INTERRUPTS to Kconfig

Only this platform sets this option, define it in the board Kconfig
file.

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig

This converts the following to Kconfig:
   CONFIG_IMX_VIDEO_SKIP
   CONFIG_IMX_HDMI

Signed-off-by: Tom Rini <trini@konsulko.com>

pwm: imx: Remove unused references to CONFIG_IMX6_PWM_PER_CLK

On platforms that use DM_PWM, we do not need to define this value
anymore, so remove it from config files.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm920t: Remove unused imx code

This code is currently unused, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_HWCONFIG to Kconfig

This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_POWER_LTC3676 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_POWER_FSL
   CONFIG_POWER_FSL_MC13892
   CONFIG_POWER_HI6553
   CONFIG_POWER_LTC3676
   CONFIG_POWER_PFUZE100
   CONFIG_POWER_PFUZE3000
   CONFIG_POWER_SPI
   CONFIG_POWER_TPS65090_EC
   CONFIG_POWER_TPS65218
   CONFIG_POWER_TPS65910

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_HIKEY_GPIO et al to Kconfig

This converts the following to Kconfig:
   CONFIG_HIKEY_GPIO
   CONFIG_TCA642X

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_FSL_SERDES to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_SERDES

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_FSL_LBC to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_LBC

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_FSL_IIM to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_IIM

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_FSL_DEVICE_DISABLE to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_DEVICE_DISABLE

Signed-off-by: Tom Rini <trini@konsulko.com>

Convert CONFIG_FSL_CADMUS to Kconfig

This converts the following to Kconfig:
   CONFIG_FSL_CADMUS

Signed-off-by: Tom Rini <trini@konsulko.com>

power: pmic: Guard non-DM_PMIC drivers with a check for POWER_LEGACY

As we have more legacy PMIC drivers to move to Kconfig, guard them all
with POWER_LEGACY or SPL_POWER_LEGACY. Do the same kind of check for
building the drivers too. This also means that we need to resort the
list slightly in the Makefile.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_* to CFG_SYS_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_*SRIO_* to CFG_*

The rest of the unmigrated CONFIG symbols in the SRIO namespace do not
easily transition to Kconfig. In many cases they likely should come from
the device tree instead. Move these out of CONFIG namespace and in to
CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_SRIO et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SRIO1
   CONFIG_SRIO2
   CONFIG_SRIO_PCIE_BOOT_MASTER
   CONFIG_SYS_SRIO

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_TIMER_COUNTS_DOWN to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_TIMER_COUNTS_DOWN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h

There are now no flags being set in these files, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

spl: Migrate SYS_SATA_FAT_BOOT_PARTITION to Kconfig

This moves SYS_SATA_FAT_BOOT_PARTITION to Kconfig and enforces the
current default via Kconfig rather than C code.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_PMAN et al to Kconfig

This converts the following to Kconfig:
   CONFIG_NOBQFMAN
   CONFIG_SYS_DPAA_DCE
   CONFIG_SYS_DPAA_FMAN
   CONFIG_SYS_DPAA_PME
   CONFIG_SYS_DPAA_RMAN
   CONFIG_SYS_PMAN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_OMAP_ABE_SYSCK to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_OMAP_ABE_SYSCK

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Remove unused symbols

This commit removes the following unused symbols:
   CONFIG_SYS_NVRAM_BASE_ADDR
   CONFIG_SYS_NVRAM_SIZE
   CONFIG_SYS_PAXE_BASE
   CONFIG_SYS_PCCNT
   CONFIG_SYS_PCDAT
   CONFIG_SYS_PCDDR
   CONFIG_SYS_PCI1_ADDR
   CONFIG_SYS_PCI2_ADDR
   CONFIG_SYS_PCI1_IO_BUS
   CONFIG_SYS_PCI1_IO_SIZE
   CONFIG_SYS_PCI1_MEM_BUS
   CONFIG_SYS_PCI1_MEM_SIZE
   CONFIG_SYS_PCIE3_ADDR
   CONFIG_SYS_PCIE4_ADDR
   CONFIG_SYS_PCIE3_IO_PHYS
   CONFIG_SYS_PCIE3_IO_VIRT
   CONFIG_SYS_PCIE4_IO_PHYS
   CONFIG_SYS_PCIE4_IO_VIRT
   CONFIG_SYS_PLL_SETTLING_TIME
   CONFIG_SYS_QMAN_CENA_BASE
   CONFIG_SYS_QMAN_SP_CENA_SIZE
   CONFIG_SYS_RCAR_I2C0_BASE
   CONFIG_SYS_RCAR_I2C1_BASE
   CONFIG_SYS_RCAR_I2C2_BASE
   CONFIG_SYS_RCAR_I2C3_BASE
   CONFIG_SYS_SATA
   CONFIG_SYS_SDRAM_BASE2
   CONFIG_SYS_SGMII_REFCLK_MHZ
   CONFIG_SYS_SGMII_LINERATE_MHZ
   CONFIG_SYS_SGMII_RATESCALE
   CONFIG_SYS_SH_SDHI0_BASE
   CONFIG_SYS_SH_SDHI0_BASE
   CONFIG_SYS_SH_SDHI1_BASE
   CONFIG_SYS_SH_SDHI2_BASE
   CONFIG_SYS_SH_SDHI3_BASE
   CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
   CONFIG_SYS_SPI_U_BOOT_SIZE
   CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR
   CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN
   CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT
   CONFIG_SYS_VCXK_BASE
   CONFIG_SYS_VCXK_DEFAULT_LINEALIGN
   CONFIG_SYS_VCXK_DOUBLEBUFFERED
   CONFIG_SYS_VCXK_ENABLE_DDR
   CONFIG_SYS_VCXK_ENABLE_PIN
   CONFIG_SYS_VCXK_ENABLE_PORT
   CONFIG_SYS_VCXK_INVERT_DDR
   CONFIG_SYS_VCXK_INVERT_PIN
   CONFIG_SYS_VCXK_INVERT_PORT
   CONFIG_SYS_VCXK_REQUEST_DDR
   CONFIG_SYS_VCXK_REQUEST_PIN
   CONFIG_SYS_VCXK_REQUEST_PORT
   CONFIG_SYS_VSC7385_BR_PRELIM
   CONFIG_SYS_VSC7385_OR_PRELIM

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

rtc: Remove unused drivers

These RTC drivers are currently unused and reference other unused CONFIG
variables, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NS16550_MEM32 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_NS16550_MIN_FUNCTIONS
   CONFIG_SYS_NS16550_MEM32
   CONFIG_SYS_NS16550_PORT_MAPPED
   CONFIG_SYS_NS16550_REG_SIZE
   CONFIG_SYS_NS16550_SERIAL

To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that
platforms can enable the legacy driver here for SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>

powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONS

This symbol is specific to the PowerPC SPL implementation, so rename
this to reflect that it's in SPL and used / tested there, so that we can
then safely migrate it to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_NOR_* to CFG_SYS_NOR_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_SIZE to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_PAGE_2K et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_PAGE_2K
   CONFIG_SYS_NAND_PAGE_4K

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_NO_SUBPAGE_WRITE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_MAX_OOBFREE
   CONFIG_SYS_NAND_MAX_ECCPOS

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: raw: atmel_nand: Use ATMEL_BASE_ECC directly

This is the only driver, and only one platform makes use of, setting
CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this
case.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_HW_ECC to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_HW_ECC

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_HW_ECC_OOBFIRST

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Remove unused symbols

This commit removes the following unused symbols:
   CONFIG_SYS_NAND_DDR_LAW
   CONFIG_SYS_NAND_ECCSTEPS
   CONFIG_SYS_NAND_ECCTOTAL
   CONFIG_SYS_NAND_ENABLE_PIN_SPL
   CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
   CONFIG_SYS_NAND_U_BOOT_RELOC_SP

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Convert CONFIG_SYS_NAND_DBW_8 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_DBW_8
   CONFIG_SYS_NAND_DBW_16

Note that all instances of the code check for CONFIG_SYS_NAND_DBW_16
being defined, and then "else" to CONFIG_SYS_NAND_DBW_8 whereas all of
the configs set CONFIG_SYS_NAND_DBW_8. So we introduce
CONFIG_SYS_NAND_DBW_16 as an option.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Prepare v2023.01-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch '2022-12-05-add-IPv6-support'

To quote the author:
This patch set adds basic IPv6 support to U-boot.
It is based on Chris's Packham patches
(https://lists.denx.de/pipermail/u-boot/2017-January/279366.html)
Chris's patches were taken as base. There were efforts to launch it on
HiFive SiFive Unmatched board but the board didn't work well. The code was
refactored, fixed some bugs as CRC for little-endian, some parts were implemented in
our own way, something was taken from Linux. Finally we did manual tests and the
board worked well.

Testing was done on HiFive SiFive Unmatched board (RISC-V)