review.tizen.org Git - platform/kernel/linux-starfive.git/log

bcache: avoid oversize memory allocation by small stripe_size

[ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ]

Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.

Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.

For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.

To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size by a value multiplying limits.io_opt and euqal or
  large than BCH_MIN_STRIPE_SZ.

Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.

Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.

Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: bypass blkcg_deactivate_policy after destroying

[ Upstream commit e63a57303599b17290cd8bc48e6f20b24289a8bc ]

blkcg_deactivate_policy() can be called after blkg_destroy_all()
returns, and it isn't necessary since blkg_destroy_all has covered
policy deactivation.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"

[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]

Inside blkg_for_each_descendant_pre(), both
css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock,
and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held()
is called.

Fix the warning by adding rcu read lock.

Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix some minor issues with bundle tracing

[ Upstream commit 0c3bd086d12d185650d095a906662593ec607bd0 ]

Fix some superficial issues with the tracing of rxrpc_bundle structs,
including:

(1) Set the debug_id when the bundle is allocated rather than when it is
set up so that the "NEW" trace line displays the correct bundle ID.

(2) Show the refcount when emitting the "FREE" traceline.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: dwmac-loongson: Add architecture dependency

[ Upstream commit 7fbd5fc2b35a8f559a6b380dfa9bcd964a758186 ]

Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.

This follows the same logic as the DWMAC_INTEL option.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: aqc111: check packet for fixup for true limit

[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]

If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.

The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.

The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM

[ Upstream commit 7e8037b099c0bbe8f2109dc452dbcab8d400fc53 ]

A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and
raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init()
doesn't call pcibios_resource_survey() -> e820__reserve_resources_late();
as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via
the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource
and hence can't be detected by register_e820_pmem().

Fix this by directly calling e820__reserve_resources_late() in
hv_pci_init(), which is called from arch_initcall(pci_arch_init).

It's ok to move a Gen2 VM's e820__reserve_resources_late() from
subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because
the code in-between doesn't depend on the E820 resources.
e820__reserve_resources_late() depends on e820__reserve_resources(),
which has been called earlier from setup_arch().

For a Gen-2 VM, the new hv_pci_init() also adds any memory of
E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() ->
acpi_nfit_insert_resource() -> region_intersects() returns
REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice.

Changed the local variable "int gen2vm" to "bool gen2vm".

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1699691867-9827-1-git-send-email-ssengar@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/mm: cow: print ksft header before printing anything else

[ Upstream commit a6fcd57cf2df409d35e9225b8dbad6f937b28df0 ]

Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.

But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled

Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child

Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Use internal class when counting engine resets

[ Upstream commit 1f721a93a528268fa97875cff515d1fcb69f4f44 ]

Commit 503579448db9 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed9915b ("drm/i915/gt: Use intel_gt as the primary object for handling resets").

Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.

Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.

What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 503579448db9 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
(cherry picked from commit cf9cb028ac56696ff879af1154c4b2f0b12701fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/selftests: Fix engine reset count storage for multi-tile

[ Upstream commit 7c7c863bf89c5f76d8c7fda177a81559b61dc15b ]

Engine->id namespace is per-tile so struct igt_live_test->reset_engine[]
needs to be two-dimensional so engine reset counts from all tiles can be
stored with no aliasing. With aliasing, if we had a real multi-tile
platform, the reset counts would be incorrect for same engine instance on
different tiles.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0c29efa23f5c ("drm/i915/selftests: Consider multi-gt instead of to_gt()")
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 0647ece3819b018cb62a71c3bcb7c2c3243e78ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initialization

[ Upstream commit 35c49cfc8b702eda7a0d3f05497b16f81b69e289 ]

Using PCI Device ID/Revision to initialize the interrupt_clear_with_0
workaround is problematic - there are many pre-production
steppings with different behavior, even with the same PCI ID/Revision

Instead of checking for PCI Device ID/Revision, check the VPU
buttress interrupt status register behavior - if this register
is not zero after writing 1s it means there register is RW
instead of RW1C and we need to enable the interrupt_clear_with_0
workaround.

Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/ivpu: Print information about used workarounds

[ Upstream commit eefa13a69053a09f20b2d1c00dda59be9c98cfe9 ]

Use ivpu_dbg(MISC) to print information about workarounds.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-6-stanislaw.gruszka@linux.intel.com
Stable-dep-of: 35c49cfc8b70 ("accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Add spinlock for setting vblank event in atomic_begin

[ Upstream commit fe4c5f662097978b6c91c23a13c24ed92339a180 ]

Add spinlock protection to avoid race condition on vblank event
between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip().

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: fix kernel oops if no crtc is found

[ Upstream commit 4662817aed5a9d6c695658d0105d8ff4b84ac6cb ]

drm_crtc_from_index(0) might return NULL if there are no CRTCs
registered at all which will lead to a kernel oops in
mtk_drm_crtc_dma_dev_get(). Add the missing return value check.

Fixes: 0d9eee9118b7 ("drm/mediatek: Add drm ovl_adaptor sub driver for MT8195")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230905084922.3908121-1-mwalle@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Fix potential deadlock when enabling ASPM

commit 49de0dc87965079a8e2803ee4b39f9d946259423 upstream.

The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during
probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set.

Since pci_walk_bus() already holds a pci_bus_sem read lock, use
pci_enable_link_state_locked() to enable link states in order to avoid a
potential deadlock (e.g. in case someone takes a write lock before
reacquiring the read lock).

Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: add "potential" in subject since the deadlock has only been
reported by lockdep, include helper name in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong name of SMB2_CREATE_ALLOCATION_SIZE

commit 13736654481198e519059d4a2e2e3b20fa9fdb3e upstream.

MS confirm that "AISi" name of SMB2_CREATE_ALLOCATION_SIZE in MS-SMB2
specification is a typo. cifs/ksmbd have been using this wrong name from
MS-SMB2. It should be "AlSi". Also It will cause problem when running
smb2.create.open test in smbtorture against ksmbd.

Cc: stable@vger.kernel.org
Fixes: 12197a7fdda9 ("Clarify SMB2/SMB3 create context and add missing ones")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ASPM: Add pci_enable_link_state_locked()

commit 718ab8226636a1a3a7d281f5d6a7ad7c925efe5a upstream.

Add pci_enable_link_state_locked() for enabling link states that can be
used in contexts where a pci_bus_sem read lock is already held (e.g. from
pci_walk_bus()).

This helper will be used to fix a couple of potential deadlocks where
the current helper is called with the lock already held, hence the CC
stable tag.

Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include helper name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: loongson: Limit MRRS to 256

commit ef61a0405742a9f7f6051bc6fd2f017d87d07911 upstream.

This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS
increases") for MIPS-based Loongson.

Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size
(MRRS) settings.  8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS
increases") worked around that by (1) assuming that firmware configured
MRRS to the maximum supported value and (2) preventing the PCI core from
increasing MRRS.

Unfortunately, some firmware doesn't set that maximum MRRS correctly, which
results in devices not being initialized correctly.  One symptom, from the
Debian report below, is this:

  ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
  ata4.00: failed command: WRITE FPDMA QUEUED
  ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
           res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  ata4.00: status: { DRDY }
  ata4: hard resetting link

Limit MRRS to 256 because MIPS Loongson with higher MRRS support is
considered rare.

This must be done at device enablement stage because the MRRS setting may
get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are
only sure parent bridge is enabled at this point.

Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587
Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI: acpiphp: Reassign resources on bridge if necessary"

commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream.

This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:

  cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")

40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.

cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.

Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:

  - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
    sometimes.

  - Dongli reported a similar problem with hot-add of SCSI disks.

  - Jonathan reported a console freeze during boot on bare metal due to an
    error in radeon GPU initialization.

Revert both patches to avoid adding these problems.  This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.

Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: reset the amp before component_add

commit 315deab289924c83ab1ded50022e8db95d6e428b upstream.

Calling component_add starts loading the firmware, the callback function
writes the program to the amplifiers. If the module resets the
amplifiers after component_add, it happens that one of the amplifiers
does not work because the reset and program writing are interleaving.

Call tas2781_reset before component_add to ensure reliable
initialization.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/4d23bf58558e23ee8097de01f70f1eb8d9de2d15.1702511246.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: call cleanup functions only once

commit 6c6fa2641402e8e753262fb61ed9a15a7cb225ad upstream.

If the module can load the RCA but not the firmware binary, it will call
the cleanup functions. Then unloading the module causes general
protection fault due to double free.

Do not call the cleanup functions in tasdev_fw_ready.

general protection fault, probably for non-canonical address
0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c5/0x430
? asm_exc_general_protection+0x26/0x30
? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib]
tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c]
component_unbind+0x2e/0x50
component_unbind_all+0x92/0xa0
component_del+0xa8/0x140
tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c]
i2c_device_remove+0x26/0xb0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: handle missing EFI calibration data

commit 33071422714a4c9587753b0ccc130ca59323bf42 upstream.

The code does not properly check whether the calibration variable is
available in the EFI. If it is not available, it causes a NULL pointer
dereference.

Check the return value of the first get_variable call also.

BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? srso_alias_return_thunk+0x5/0x7f
? schedule+0x5e/0xd0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? crc32_body+0x2c/0x120
? tas2781_save_calibration+0xe4/0x220 [snd_hda_scodec_tas2781_i2c]
tasdev_fw_ready+0x1af/0x280 [snd_hda_scodec_tas2781_i2c]
request_firmware_work_func+0x59/0xa0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f1f6583bda918f78556f67d522ca7b3b91cebbd5.1702251102.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: leave hda_component in usable state

commit 75a25d31b80770485641ad2789a854955f5c1e40 upstream.

Unloading then loading the module causes a NULL ponter dereference.

The hda_unbind zeroes the hda_component, later the hda_bind tries
to dereference the codec field.

The hda_component is only initialized once by tas2781_generic_fixup.

Set only previously modified fields to NULL.

BUG: kernel NULL pointer dereference, address: 0000000000000322
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? tas2781_hda_bind+0x59/0x140 [snd_hda_scodec_tas2781_i2c]
component_bind_all+0xf3/0x240
try_to_bring_up_aggregate_device+0x1c3/0x270
__component_add+0xbc/0x1a0
tas2781_hda_i2c_probe+0x289/0x3a0 [snd_hda_scodec_tas2781_i2c]
i2c_device_probe+0x136/0x2e0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/8b8ed2bd5f75fbb32e354a3226c2f966fa85b46b.1702156522.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply mute LED quirk for HP15-db

commit 9b726bf6ae11add6a7a52883a21f90ff9cbca916 upstream.

The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute
LED using COEF 0x07 index 1.
Sound card subsystem: Hewlett-Packard Company Device [103c:84ae]

Use the existing quirk for this model.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e61815d0-f1c7-b164-e49d-6ca84771476a@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants

commit 924f5ca2975b2993ee81a7ecc3c809943a70f334 upstream.

On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec
pins are not registered properly without the force-connect quirk. The
codec will report only one pin as having external connectivity, but i915
finds all three connectors on the system, so the two drivers are not
in sync.

Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: add force-connect quirk for NUC5CPYB

commit 3b1ff57e24a7bcd2e2a8426dd2013a80d1fa96eb upstream.

Add one more older NUC model that requires quirk to force all pins to be
connected. The display codec pins are not registered properly without
the force-connect quirk. The codec will report only one pin as having
external connectivity, but i915 finds all three connectors on the
system, so the two drivers are not in sync.

Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.

Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/3
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation

commit 1ba0e9d69b2000e95267c888cbfa91d823388d47 upstream.

In 8e9fad0e70b7 "io_uring: Add io_uring command support for sockets"
you've got an include of asm-generic/ioctls.h done in io_uring/uring_cmd.c.
That had been done for the sake of this chunk -
+               ret = prot->ioctl(sk, SIOCINQ, &arg);
+               if (ret)
+                       return ret;
+               return arg;
+       case SOCKET_URING_OP_SIOCOUTQ:
+               ret = prot->ioctl(sk, SIOCOUTQ, &arg);

SIOC{IN,OUT}Q are defined to symbols (FIONREAD and TIOCOUTQ) that come from
ioctls.h, all right, but the values vary by the architecture.

FIONREAD is
0x467F on mips
0x4004667F on alpha, powerpc and sparc
0x8004667F on sh and xtensa
0x541B everywhere else
TIOCOUTQ is
0x7472 on mips
0x40047473 on alpha, powerpc and sparc
0x80047473 on sh and xtensa
0x5411 everywhere else

->ioctl() expects the same values it would've gotten from userland; all
places where we compare with SIOC{IN,OUT}Q are using asm/ioctls.h, so
they pick the correct values.  io_uring_cmd_sock(), OTOH, ends up
passing the default ones.

Fixes: 8e9fad0e70b7 ("io_uring: Add io_uring command support for sockets")
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231214213408.GT1674809@ZenIV
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: dax: set fc->dax to NULL in fuse_dax_conn_free()

commit 7f8ed28d1401320bcb02dda81b3c23ab2dc5a6d8 upstream.

fuse_dax_conn_free() will be called when fuse_fill_super_common() fails
after fuse_dax_conn_alloc(). Then deactivate_locked_super() in
virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded
superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(),
resulting in a possible double free.

Fixes: 1dd539577c42 ("virtiofs: add a mount option to enable dax")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: disable FOPEN_PARALLEL_DIRECT_WRITES with FUSE_DIRECT_IO_ALLOW_MMAP

commit 3f29f1c336c0e8a4bec52f1e5217f88835553e5b upstream.

The new fuse init flag FUSE_DIRECT_IO_ALLOW_MMAP breaks assumptions made by
FOPEN_PARALLEL_DIRECT_WRITES and causes test generic/095 to hit
BUG_ON(fi->writectr < 0) assertions in fuse_set_nowrite():

generic/095 5s ...
  kernel BUG at fs/fuse/dir.c:1756!
...
  ? fuse_set_nowrite+0x3d/0xdd
  ? do_raw_spin_unlock+0x88/0x8f
  ? _raw_spin_unlock+0x2d/0x43
  ? fuse_range_is_writeback+0x71/0x84
  fuse_sync_writes+0xf/0x19
  fuse_direct_io+0x167/0x5bd
  fuse_direct_write_iter+0xf0/0x146

Auto disable FOPEN_PARALLEL_DIRECT_WRITES when server negotiated
FUSE_DIRECT_IO_ALLOW_MMAP.

Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: share lookup state between submount and its parent

commit c4d361f66ac91db8fc65061a9671682f61f4ca9d upstream.

Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent.  Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.

Trouble arises when the submount's parent is evicted despite the
submount itself being in use.  In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation.  When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.

Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount.  When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 1866d779d5d2 ("fuse: Allow fuse_fill_super_common() for submounts")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP

commit c55e0a55b165202f18cbc4a20650d2e1becd5507 upstream.

Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.

Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.

[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.

Signed-off-by: Tyler Fanelli <tfanelli@redhat.com>
Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Add quirk for Labtec/ODDOR/aikeec handbrake

commit 31e52523267faab5ed8569b9d5c22c9a2283872f upstream.

This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.

Link: https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]

commit a9f68ffe1170ca4bc17ab29067d806a354a026e0 upstream.

Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.

Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.

This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.

Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cred: get rid of CONFIG_DEBUG_CREDENTIALS

commit ae1914174a63a558113e80d24ccac2773f9f7b2b upstream.

This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.

Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cred: switch to using atomic_long_t

commit f8fa5d76925991976b3e7076f9d1052515ec1fca upstream.

There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.

With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: atlantic: fix double free in ring reinit logic

[ Upstream commit 7bb26ea74aa86fdf894b7dbd8c5712c5b4187da7 ]

Driver has a logic leak in ring data allocation/free,
where double free may happen in aq_ring_free if system is under
stress and driver init/deinit is happening.

The probability is higher to get this during suspend/resume cycle.

Verification was done simulating same conditions with

stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000
while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done

Fixed by explicitly clearing pointers to NULL on deallocation

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

appletalk: Fix Use-After-Free in atalk_ioctl

[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ]

Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Handle disabled MDIO busses from devicetree

[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ]

Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.

of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.

Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX

[ Upstream commit 981d947bcd382c3950a593690e0e13d194d65b1c ]

In 10M SGMII mode all the packets are being dropped due to wrong Rx clock.
SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx.
Update configure SGMII function with Rx clk divider programming.

Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-switch: do not ask for MDB, VLAN and FDB replay

[ Upstream commit f24a49a375f65e8e75ee1b19d806f46dbaae57fd ]

Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.

In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.

In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.

This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.

The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.

Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-switch: fix size of the dma_unmap

[ Upstream commit 2aad7d4189a923b24efa8ea6ad09059882b1bfe4 ]

The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.

Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ]

We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sign-file: Fix incorrect return values check

[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ]

There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.

Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: dwmac-loongson: Make sure MDIO is initialized before use

[ Upstream commit e87d3a1370ce9f04770d789bcf7cce44865d2e8d ]

Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix XDP redirection error

[ Upstream commit 4ab138ca0a340e6d6e7a6a9bd5004bd8f83127ca ]

When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).

This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.

Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix DMA syncing in XDP path when SWIOTLB is on

[ Upstream commit d760117060cf2e90b5c59c5492cab179a4dbce01 ]

This patch fixes two issues:

Issue 1
-------
Description
```````````
Current code does not call dma_sync_single_for_cpu() to sync data from
the device side memory to the CPU side memory before the XDP code path
uses the CPU side data.
This causes the XDP code path to read the unset garbage data in the CPU
side memory, resulting in incorrect handling of the packet by XDP.

Solution
````````
1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to
   use the data in the CPU side memory.
2. The XDP code verdict can be XDP_PASS, in which case there is a
   fallback to the non-XDP code, which also calls
   dma_sync_single_for_cpu().
   To avoid calling dma_sync_single_for_cpu() twice:
2.1. Put the dma_sync_single_for_cpu() in the code in such a place where
     it happens before XDP and non-XDP code.
2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code
     for the first buffer only (rx_copybreak and non-rx_copybreak
     cases), since the new call that was added covers these cases.
     The call to dma_sync_single_for_cpu() for the second buffer and on
     stays because only the first buffer is handled by the newly added
     dma_sync_single_for_cpu(). And there is no need for special
     handling of the second buffer and on for the XDP path since
     currently the driver supports only single buffer packets.

Issue 2
-------
Description
```````````
In case the XDP code forwarded the packet (ENA_XDP_FORWARDED),
ena_unmap_rx_buff_attrs() is called with attrs set to 0.
This means that before unmapping the buffer, the internal function
dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on
the whole buffer (not only on the data part of it).
This sync is both wasteful (since a sync was already explicitly
called before) and also causes a bug, which will be explained
using the below diagram.

The following diagram shows the flow of events causing the bug.
The order of events is (1)-(4) as shown in the diagram.

CPU side memory area

     (3)convert_to_xdp_frame() initializes the
        headroom with xdpf metadata
                      ||
                      \/
          ___________________________________
         |                                   |
0       |                                   V                       4K
---------------------------------------------------------------------
| xdpf->data      | other xdpf       |   < data >   | tailroom ||...|
|                 | fields           |              | GARBAGE  ||   |
---------------------------------------------------------------------

                   /\                        /\
                   ||                        ||
   (4)ena_unmap_rx_buff_attrs() calls     (2)dma_sync_single_for_cpu()
      dma_sync_single_for_cpu() on the       copies data from device
      whole buffer page, overwriting         side to CPU side memory
      the xdpf->data with GARBAGE.           ||
0                                                                   4K
---------------------------------------------------------------------
| headroom                           |   < data >   | tailroom ||...|
| GARBAGE                            |              | GARBAGE  ||   |
---------------------------------------------------------------------

Device side memory area                      /\
                                             ||
                               (1) device writes RX packet data

After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data
becomes corrupted, and so when it is later accessed in
ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault,
crashing the kernel.

Solution
````````
Explicitly tell ena_unmap_rx_buff_attrs() not to call
dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC
flag.

Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix xdp drops handling due to multibuf packets

[ Upstream commit 505b1a88d311ff6f8c44a34f94e3be21745cce6f ]

Current xdp code drops packets larger than ENA_XDP_MAX_MTU.
This is an incorrect condition since the problem is not the
size of the packet, rather the number of buffers it contains.

This commit:

1. Identifies and drops XDP multi-buffer packets at the
beginning of the function.
2. Increases the xdp drop statistic when this drop occurs.
3. Adds a one-time print that such drops are happening to
give better indication to the user.

Fixes: 838c93dc5449 ("net: ena: implement XDP drop support")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Destroy correct number of xdp queues upon failure

[ Upstream commit 41db6f99b5489a0d2ef26afe816ef0c6118d1d47 ]

The ena_setup_and_create_all_xdp_queues() function freed all the
resources upon failure, after creating only xdp_num_queues queues,
instead of freeing just the created ones.

In this patch, the only resources that are freed, are the ones
allocated right before the failure occurs.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Remove acked SYN flag from packet in the transmit queue correctly

[ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ]

syzkaller report:

kernel BUG at net/core/skbuff.c:3452!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
Call Trace:
icmp_glue_bits (net/ipv4/icmp.c:357)
__ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
icmp_push_reply (net/ipv4/icmp.c:370)
__icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
ip_output (net/ipv4/ip_output.c:427)
__ip_queue_xmit (net/ipv4/ip_output.c:535)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
__tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)

The panic issue was trigered by tcp simultaneous initiation.
The initiation process is as follows:

      TCP A                                            TCP B

  1.  CLOSED                                           CLOSED

  2.  SYN-SENT     --> <SEQ=100><CTL=SYN>              ...

  3.  SYN-RECEIVED <-- <SEQ=300><CTL=SYN>              <-- SYN-SENT

  4.               ... <SEQ=100><CTL=SYN>              --> SYN-RECEIVED

  5.  SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...

  // TCP B: not send challenge ack for ack limit or packet loss
  // TCP A: close
tcp_close
   tcp_send_fin
              if (!tskb && tcp_under_memory_pressure(sk))
                  tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
           TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN;  // set FIN flag

  6.  FIN_WAIT_1  --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...

  // TCP B: send challenge ack to SYN_FIN_ACK

  7.               ... <SEQ=301><ACK=101><CTL=ACK>   <-- SYN-RECEIVED //challenge ack

  // TCP A:  <SND.UNA=101>

  8.  FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic

__tcp_retransmit_skb  //skb->len=0
    tcp_trim_head
len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
    __pskb_trim_head
skb->data_len -= len // skb->len=-1, wrap around
    ... ...
    ip_fragment
icmp_glue_bits //BUG_ON

If we use tcp_trim_head() to remove acked SYN from packet that contains data
or other flags, skb->len will be incorrectly decremented. We can remove SYN
flag that has been acked from rtx_queue earlier than tcp_trim_head(), which
can fix the problem mentioned above.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix a potential use-after-free in qed_cxt_tables_alloc

[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ]

qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to
free p_hwfn->p_cxt_mngr->ilt_shadow on error. However,
qed_cxt_tables_alloc() accesses the freed pointer on failure
of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(),
which may lead to use-after-free. Fix this issue by setting
p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().

Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close

[ Upstream commit 7ae42ef308ed0f6250b36f43e4eeb182ebbe6215 ]

Make the flow for pci shutdown be the same to the pci remove.

iavf_shutdown was implementing an incomplete version
of iavf_remove. It misses several calls to the kernel like
iavf_free_misc_irq, iavf_reset_interrupt_capability, iounmap
that might break the system on reboot or hibernation.

Implement the call of iavf_remove directly in iavf_shutdown to
close this gap.

Fixes below error messages (dmesg) during shutdown stress tests -
[685814.900917] ice 0000:88:00.0: MAC 02:d0:5f:82:43:5d does not exist for
VF 0
[685814.900928] ice 0000:88:00.0: MAC 33:33:00:00:00:01 does not exist for
VF 0

Reproduction:

1. Create one VF interface:
echo 1 > /sys/class/net/<interface_name>/device/sriov_numvfs

2. Run live dmesg on the host:
dmesg -wH

3. On SUT, script below steps into vf_namespace_assignment.sh

<#!/bin/sh> // Remove <>. Git removes # line
if=<VF name> (edit this per VF name)
loop=0

while true; do

echo test round $loop
let loop++

ip netns add ns$loop
ip link set dev $if up
ip link set dev $if netns ns$loop
ip netns exec ns$loop ip link set dev $if up
ip netns exec ns$loop ip link set dev $if netns 1
ip netns delete ns$loop

done

4. Run the script for at least 1000 iterations on SUT:
./vf_namespace_assignment.sh

Expected result:
No errors in dmesg.

Fixes: 129cf89e5856 ("iavf: rename functions and structs to new name")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ranganatha Rao <ranganatha.rao@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Handle ntuple on/off based on new state machines for flow director

[ Upstream commit 09d23b8918f9ab0f8114f6b94f2faf8bde3fb52a ]

ntuple-filter feature on/off:
Default is on. If turned off, the filters will be removed from both
PF and iavf list. The removal is irrespective of current filter state.

Steps to reproduce:
-------------------

1. Ensure ntuple is on.

ethtool -K enp8s0 ntuple-filters on

2. Create a filter to receive the traffic into non-default rx-queue like 15
and ensure traffic is flowing into queue into 15.
Now, turn off ntuple. Traffic should not flow to configured queue 15.
It should flow to default RX queue.

Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Introduce new state machines for flow director

[ Upstream commit 3a0b5a2929fdeda63fc921c2dbed237059acf732 ]

New states introduced:

IAVF_FDIR_FLTR_DIS_REQUEST
IAVF_FDIR_FLTR_DIS_PENDING
IAVF_FDIR_FLTR_INACTIVE

Current FDIR state machines (SM) are not adequate to handle a few
scenarios in the link DOWN/UP event, reset event and ntuple-feature.

For example, when VF link goes DOWN and comes back UP administratively,
the expectation is that previously installed filters should also be
restored. But with current SM, filters are not restored.
So with new SM, during link DOWN filters are marked as INACTIVE in
the iavf list but removed from PF. After link UP, SM will transition
from INACTIVE to ADD_REQUEST to restore the filter.

Similarly, with VF reset, filters will be removed from the PF, but
marked as INACTIVE in the iavf list. Filters will be restored after
reset completion.

Steps to reproduce:
-------------------

1. Create a VF. Here VF is enp8s0.

2. Assign IP addresses to VF and link partner and ping continuously
from remote. Here remote IP is 1.1.1.1.

3. Check default RX Queue of traffic.

ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets"

4. Add filter - change default RX Queue (to 15 here)

ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5

5. Ensure filter gets added and traffic is received on RX queue 15 now.

Link event testing:
-------------------
6. Bring VF link down and up. If traffic flows to configured queue 15,
test is success, otherwise it is a failure.

Reset event testing:
--------------------
7. Reset the VF. If traffic flows to configured queue 15, test is success,
otherwise it is a failure.

Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rose: Fix Use-After-Free in rose_ioctl

[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ]

Because rose_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.
```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```
Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: Fix Use-After-Free in do_vcc_ioctl

[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ]

Because do_vcc_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.
```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix pause frame configuration

[ Upstream commit e307b5a845c5951dabafc48d00b6424ee64716c4 ]

The current implementation's default Pause Forward setting is causing
unnecessary network traffic. This patch disables Pause Forward to
address this issue.

Fixes: 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Update RSS algorithm index

[ Upstream commit 570ba37898ecd9069beb58bf0b6cf84daba6e0fe ]

The RSS flow algorithm is not set up correctly for promiscuous or all
multi MCAM entries. This has an impact on flow distribution.

This patch fixes the issue by updating flow algorithm index in above
mentioned MCAM entries.

Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix promisc mcam entry action

[ Upstream commit dbda436824ded8ef6a05bb82cd9baa8d42377a49 ]

Current implementation is such that, promisc mcam entry action
is set as multicast even when there are no trusted VFs. multicast
action causes the hardware to copy packet data, which reduces
the performance.

This patch fixes this issue by setting the promisc mcam entry action to
unicast instead of multicast when there are no trusted VFs. The same
change is made for the 'allmulti' mcam entry action.

Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeon_ep: explicitly test for firmware ready value

[ Upstream commit 284f717622417cb267e344a9174f8e5698d1e3c1 ]

The firmware ready value is 1, and get firmware ready status
function should explicitly test for that value. The firmware
ready value read will be 2 after driver load, and on unbind
till firmware rewrites the firmware ready back to 0, the value
seen by driver will be 2, which should be regarded as not ready.

Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table

[ Upstream commit 125f1c7f26ffcdbf96177abe75b70c1a6ceb17bc ]

The referenced change added custom cleanup code to act_ct to delete any
callbacks registered on the parent block when deleting the
tcf_ct_flow_table instance. However, the underlying issue is that the
drivers don't obtain the reference to the tcf_ct_flow_table instance when
registering callbacks which means that not only driver callbacks may still
be on the table when deleting it but also that the driver can still have
pointers to its internal nf_flowtable and can use it concurrently which
results either warning in netfilter[0] or use-after-free.

Fix the issue by taking a reference to the underlying struct
tcf_ct_flow_table instance when registering the callback and release the
reference when unregistering. Expose new API required for such reference
counting by adding two new callbacks to nf_flowtable_type and implementing
them for act_ct flowtable_ct type. This fixes the issue by extending the
lifetime of nf_flowtable until all users have unregistered.

[0]:
[106170.938634] ------------[ cut here ]------------
[106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm
ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis
try overlay mlx5_core
[106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1
[106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00
[106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202
[106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48
[106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000
[106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700
[106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58
[106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000
[106170.951616] FS:  0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000
[106170.952329] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0
[106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[106170.954766] Call Trace:
[106170.955057]  <TASK>
[106170.955315]  ? __warn+0x79/0x120
[106170.955648]  ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.956172]  ? report_bug+0x17c/0x190
[106170.956537]  ? handle_bug+0x3c/0x60
[106170.956891]  ? exc_invalid_op+0x14/0x70
[106170.957264]  ? asm_exc_invalid_op+0x16/0x20
[106170.957666]  ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core]
[106170.958172]  ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core]
[106170.958788]  ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.959339]  ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core]
[106170.959854]  ? mapping_remove+0x154/0x1d0 [mlx5_core]
[106170.960342]  ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core]
[106170.960927]  mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core]
[106170.961441]  mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core]
[106170.962001]  mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core]
[106170.962524]  mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core]
[106170.963034]  mlx5e_flow_put+0x73/0xe0 [mlx5_core]
[106170.963506]  mlx5e_put_flow_list+0x38/0x70 [mlx5_core]
[106170.964002]  mlx5e_rep_update_flows+0xec/0x290 [mlx5_core]
[106170.964525]  mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core]
[106170.965056]  process_one_work+0x13a/0x2c0
[106170.965443]  worker_thread+0x2e5/0x3f0
[106170.965808]  ? rescuer_thread+0x410/0x410
[106170.966192]  kthread+0xc6/0xf0
[106170.966515]  ? kthread_complete_and_exit+0x20/0x20
[106170.966970]  ret_from_fork+0x2d/0x50
[106170.967332]  ? kthread_complete_and_exit+0x20/0x20
[106170.967774]  ret_from_fork_asm+0x11/0x20
[106170.970466]  </TASK>
[106170.970726] ---[ end trace 0000000000000000 ]---

Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: fix a use-after-free in rvu_nix_register_reporters

[ Upstream commit 28a7cb045ab700de5554193a1642917602787784 ]

The rvu_dl will be freed in rvu_nix_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through the following call chain:

rvu_nix_health_reporters_destroy
  |-> rvu_nix_health_reporters_create
       |-> rvu_health_reporters_create
             |-> rvu_register_dl (label err_dl_health)

Finally. in the err_dl_health label, rvu_dl being freed again in
rvu_health_reporters_destroy(rvu) by rvu_nix_health_reporters_destroy.
In the second calls of rvu_nix_health_reporters_destroy, however,
it uses rvu_dl->rvu_nix_health_reporter, which is already freed at
the end of rvu_nix_health_reporters_destroy in the first call.

So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.

Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: correct queue selection

[ Upstream commit 9fc95fe95c3e2a63ced8eeca4b256518ab204b63 ]

The old implementation extracted VLAN TCI info from the payload
before the VLAN tag has been pushed in the payload.

Another problem was that the VLAN TCI was extracted even if the
packet did not have VLAN protocol header.

This resulted in invalid VLAN TCI and as a consequence a random
queue was computed.

This patch fixes the above issues and use the VLAN TCI from the
skb if it is present or VLAN TCI from payload if present. If no
VLAN header is present queue 0 is selected.

Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations")
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: solos-pci: Fix potential deadlock on &tx_queue_lock

[ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ]

As &card->tx_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.

<deadlock #2>
pclose()
--> spin_lock(&card->tx_queue_lock)
<interrupt>
   --> solos_bh()
   --> fpga_tx()
   --> spin_lock(&card->tx_queue_lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh()
on &card->tx_queue_lock under process context code consistently to
prevent the possible deadlock scenario.

Fixes: 213e85d38912 ("solos-pci: clean up pclose() function")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: solos-pci: Fix potential deadlock on &cli_queue_lock

[ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ]

As &card->cli_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.

<deadlock #1>
console_show()
--> spin_lock(&card->cli_queue_lock)
<interrupt>
--> solos_bh()
--> spin_lock(&card->cli_queue_lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh()
on the card->cli_queue_lock under process context code consistently
to prevent the possible deadlock scenario.

Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic

[ Upstream commit c13e268c0768659cdaae4bfe2fb24860bcc8ddb4 ]

When the chip is configured to timestamp all receive packets, the
timestamp in the RX completion is only valid if the metadata
present flag is not set for packets received on the wire. In
addition, internal loopback packets will never have a valid timestamp
and the timestamp field will always be zero. We must exclude
any 0 value in the timestamp field because there is no way to
determine if it is a loopback packet or not.

Add a new function bnxt_rx_ts_valid() to check for all timestamp
valid conditions.

Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix wrong return value check in bnxt_close_nic()

[ Upstream commit bd6781c18cb5b5e5d8c5873fa9a51668e89ec76e ]

The wait_event_interruptible_timeout() function returns 0
if the timeout elapsed, -ERESTARTSYS if it was interrupted
by a signal, and the remaining jiffies otherwise if the
condition evaluated to true before the timeout elapsed.

Driver should have checked for zero return value instead of
a positive value.

MChan: Print a warning for -ERESTARTSYS.  The close operation
will proceed anyway when wait_event_interruptible_timeout()
returns for any reason.  Since we do the close no matter what,
we should not return this error code to the caller.  Change
bnxt_close_nic() to a void function and remove all error
handling from some of the callers.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix skb recycling logic in bnxt_deliver_skb()

[ Upstream commit aded5d1feb08e48d544845d3594d70c4d5fe6e54 ]

Receive SKBs can go through the VF-rep path or the normal path.
skb_mark_for_recycle() is only called for the normal path. Fix it
to do it for both paths to fix possible stalled page pool shutdown
errors.

Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Clear resource reservation during resume

[ Upstream commit 9ef7c58f5abe41e6d91f37f28fe2d851ffedd92a ]

We are issuing HWRM_FUNC_RESET cmd to reset the device including
all reserved resources, but not clearing the reservations
within the driver struct. As a result, when the driver re-initializes
as part of resume, it believes that there is no need to do any
resource reservation and goes ahead and tries to allocate rings
which will eventually fail beyond a certain number pre-reserved by
the firmware.

Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qca_spi: Fix reset behavior

[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ]

In case of a reset triggered by the QCA7000 itself, the behavior of the
qca_spi driver was not quite correct:
- in case of a pending RX frame decoding the drop counter must be
incremented and decoding state machine reseted
- also the reset counter must always be incremented regardless of sync
state

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qca_debug: Fix ethtool -G iface tx behavior

[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ]

After calling ethtool -g it was not possible to adjust the TX ring
size again:

  # ethtool -g eth1
  Ring parameters for eth1:
  Pre-set maximums:
  RX: 4
  RX Mini: n/a
  RX Jumbo: n/a
  TX: 10
  Current hardware settings:
  RX: 4
  RX Mini: n/a
  RX Jumbo: n/a
  TX: 10
  # ethtool -G eth1 tx 8
  netlink error: Invalid argument

The reason for this is that the readonly setting rx_pending get
initialized and after that the range check in qcaspi_set_ringparam()
fails regardless of the provided parameter. So fix this by accepting
the exposed RX defaults. Instead of adding another magic number
better use a new define here.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qca_debug: Prevent crash on TX ring changes

[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ]

The qca_spi driver stop and restart the SPI kernel thread
(via ndo_stop & ndo_open) in case of TX ring changes. This is
a big issue because it allows userspace to prevent restart of
the SPI kernel thread (via signals). A subsequent change of
TX ring wrongly assume a valid spi_thread pointer which result
in a crash.

So prevent this by stopping the network traffic handling and
temporary park the SPI thread.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX

[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ]

Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.

We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.

We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.

This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.

Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix a NULL vs IS_ERR() check

[ Upstream commit ca4ef28d0ad831d2521fa2b16952f37fd9324ca3 ]

The mlx5_esw_offloads_devlink_port() function returns error pointers, not
NULL.

Fixes: 7bef147a6ab6 ("net/mlx5: Don't skip vport check")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Check netdev pointer before checking its net ns

[ Upstream commit 7aaf975238c47b710fcc4eca0da1e7902a53abe2 ]

Previously, when comparing the net namespaces, the case where the netdev
doesn't exist wasn't taken into account, and therefore can cause a crash.
In such a case, the comparing function should return false, as there is no
netdev->net to compare the devlink->net to.

Furthermore, this will result in an attempt to enter switchdev mode
without a netdev to fail, and which is the desired result as there is no
meaning in switchdev mode without a net device.

Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Nack sync reset request when HotPlug is enabled

[ Upstream commit 3d7a3f2612d75de5f371a681038b089ded6667eb ]

Current sync reset flow is not supported when PCIe bridge connected
directly to mlx5 device has HotPlug interrupt enabled and can be
triggered on link state change event. Return nack on reset request in
such case.

Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: TC, Don't offload post action rule if not supported

[ Upstream commit ccbe33003b109f14c4dde2a4fca9c2a50c423601 ]

If post action is not supported, eg. ignore_flow_level is not
supported, don't offload post action rule. Otherwise, will hit
panic [1].

Fix it by checking if post action table is valid or not.

[1]
[445537.863880] BUG: unable to handle page fault for address: ffffffffffffffb1
[445537.864617] #PF: supervisor read access in kernel mode
[445537.865244] #PF: error_code(0x0000) - not-present page
[445537.865860] PGD 70683a067 P4D 70683a067 PUD 70683c067 PMD 0
[445537.866497] Oops: 0000 [#1] PREEMPT SMP NOPTI
[445537.867077] CPU: 19 PID: 248742 Comm: tc Kdump: loaded Tainted: G           O       6.5.0+ #1
[445537.867888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[445537.868834] RIP: 0010:mlx5e_tc_post_act_add+0x51/0x130 [mlx5_core]
[445537.869635] Code: c0 0d 00 00 e8 20 96 c6 d3 48 85 c0 0f 84 e5 00 00 00 c7 83 b0 01 00 00 00 00 00 00 49 89 c5 31 c0 31 d2 66 89 83 b4 01 00 00 <49> 8b 44 24 10 83 23 df 83 8b d8 01 00 00 04 48 89 83 c0 01 00 00
[445537.871318] RSP: 0018:ffffb98741cef428 EFLAGS: 00010246
[445537.871962] RAX: 0000000000000000 RBX: ffff8df341167000 RCX: 0000000000000001
[445537.872704] RDX: 0000000000000000 RSI: ffffffff954844e1 RDI: ffffffff9546e9cb
[445537.873430] RBP: ffffb98741cef448 R08: 0000000000000020 R09: 0000000000000246
[445537.874160] R10: 0000000000000000 R11: ffffffff943f73ff R12: ffffffffffffffa1
[445537.874893] R13: ffff8df36d336c20 R14: ffffffffffffffa1 R15: ffff8df341167000
[445537.875628] FS:  00007fcd6564f800(0000) GS:ffff8dfa9ea00000(0000) knlGS:0000000000000000
[445537.876425] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[445537.877090] CR2: ffffffffffffffb1 CR3: 00000003b5884001 CR4: 0000000000770ee0
[445537.877832] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[445537.878564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[445537.879300] PKRU: 55555554
[445537.879797] Call Trace:
[445537.880263]  <TASK>
[445537.880713]  ? show_regs+0x6e/0x80
[445537.881232]  ? __die+0x29/0x70
[445537.881731]  ? page_fault_oops+0x85/0x160
[445537.882276]  ? search_exception_tables+0x65/0x70
[445537.882852]  ? kernelmode_fixup_or_oops+0xa2/0x120
[445537.883432]  ? __bad_area_nosemaphore+0x18b/0x250
[445537.884019]  ? bad_area_nosemaphore+0x16/0x20
[445537.884566]  ? do_kern_addr_fault+0x8b/0xa0
[445537.885105]  ? exc_page_fault+0xf5/0x1c0
[445537.885623]  ? asm_exc_page_fault+0x2b/0x30
[445537.886149]  ? __kmem_cache_alloc_node+0x1df/0x2a0
[445537.886717]  ? mlx5e_tc_post_act_add+0x51/0x130 [mlx5_core]
[445537.887431]  ? mlx5e_tc_post_act_add+0x30/0x130 [mlx5_core]
[445537.888172]  alloc_flow_post_acts+0xfb/0x1c0 [mlx5_core]
[445537.888849]  parse_tc_actions+0x582/0x5c0 [mlx5_core]
[445537.889505]  parse_tc_fdb_actions+0xd7/0x1f0 [mlx5_core]
[445537.890175]  __mlx5e_add_fdb_flow+0x1ab/0x2b0 [mlx5_core]
[445537.890843]  mlx5e_add_fdb_flow+0x56/0x120 [mlx5_core]
[445537.891491]  ? debug_smp_processor_id+0x1b/0x30
[445537.892037]  mlx5e_tc_add_flow+0x79/0x90 [mlx5_core]
[445537.892676]  mlx5e_configure_flower+0x305/0x450 [mlx5_core]
[445537.893341]  mlx5e_rep_setup_tc_cls_flower+0x3d/0x80 [mlx5_core]
[445537.894037]  mlx5e_rep_setup_tc_cb+0x5c/0xa0 [mlx5_core]
[445537.894693]  tc_setup_cb_add+0xdc/0x220
[445537.895177]  fl_hw_replace_filter+0x15f/0x220 [cls_flower]
[445537.895767]  fl_change+0xe87/0x1190 [cls_flower]
[445537.896302]  tc_new_tfilter+0x484/0xa50

Fixes: f0da4daa3413 ("net/mlx5e: Refactor ct to use post action infrastructure")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Automatic Verification <verifier@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shachar Kagan <skagan@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work

[ Upstream commit eab0da38912ebdad922ed0388209f7eb0a5163cd ]

Due to the cited patch, devlink health commands take devlink lock and
this may result in deadlock for mlx5e_tx_reporter as it takes local
state_lock before calling devlink health report and on the other hand
devlink health commands such as diagnose for same reporter take local
state_lock after taking devlink lock (see kernel log below).

To fix it, remove local state_lock from mlx5e_tx_timeout_work() before
calling devlink_health_report() and take care to cancel the work before
any call to close channels, which may free the SQs that should be
handled by the work. Before cancel_work_sync(), use current_work() to
check we are not calling it from within the work, as
mlx5e_tx_timeout_work() itself may close the channels and reopen as part
of recovery flow.

While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to
ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock()
and a flag to avoid deadlock by calling cancel_work_sync() before
closing the channels while holding rtnl_lock too.

Kernel log:
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted
------------------------------------------------------
kworker/u16:2/65 is trying to acquire lock:
ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0

but task is already holding lock:
ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&priv->state_lock){+.+.}-{3:3}:
       __mutex_lock+0x12c/0x14b0
       mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core]
       devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50
       genl_family_rcv_msg_doit+0x1e9/0x2f0
       genl_rcv_msg+0x2e9/0x530
       netlink_rcv_skb+0x11d/0x340
       genl_rcv+0x24/0x40
       netlink_unicast+0x438/0x710
       netlink_sendmsg+0x788/0xc40
       sock_sendmsg+0xb0/0xe0
       __sys_sendto+0x1c1/0x290
       __x64_sys_sendto+0xdd/0x1b0
       do_syscall_64+0x3d/0x90
       entry_SYSCALL_64_after_hwframe+0x46/0xb0

-> #0 (&devlink->lock_key#2){+.+.}-{3:3}:
       __lock_acquire+0x2c8a/0x6200
       lock_acquire+0x1c1/0x550
       __mutex_lock+0x12c/0x14b0
       devlink_health_report+0x2f1/0x7e0
       mlx5e_health_report+0xc9/0xd7 [mlx5_core]
       mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core]
       mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core]
       process_one_work+0x7c2/0x1340
       worker_thread+0x59d/0xec0
       kthread+0x28f/0x330
       ret_from_fork+0x1f/0x30

other info that might help us debug this:

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&priv->state_lock);
                               lock(&devlink->lock_key#2);
                               lock(&priv->state_lock);
  lock(&devlink->lock_key#2);

*** DEADLOCK ***

4 locks held by kworker/u16:2/65:
#0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340
#1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340
#2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core]
#3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]

stack backtrace:
CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
check_noncircular+0x278/0x300
? print_circular_bug+0x460/0x460
? find_held_lock+0x2d/0x110
? __stack_depot_save+0x24c/0x520
? alloc_chain_hlocks+0x228/0x700
__lock_acquire+0x2c8a/0x6200
? register_lock_class+0x1860/0x1860
? kasan_save_stack+0x1e/0x40
? kasan_set_free_info+0x20/0x30
? ____kasan_slab_free+0x11d/0x1b0
? kfree+0x1ba/0x520
? devlink_health_do_dump.part.0+0x171/0x3a0
? devlink_health_report+0x3d5/0x7e0
lock_acquire+0x1c1/0x550
? devlink_health_report+0x2f1/0x7e0
? lockdep_hardirqs_on_prepare+0x400/0x400
? find_held_lock+0x2d/0x110
__mutex_lock+0x12c/0x14b0
? devlink_health_report+0x2f1/0x7e0
? devlink_health_report+0x2f1/0x7e0
? mutex_lock_io_nested+0x1320/0x1320
? trace_hardirqs_on+0x2d/0x100
? bit_wait_io_timeout+0x170/0x170
? devlink_health_do_dump.part.0+0x171/0x3a0
? kfree+0x1ba/0x520
? devlink_health_do_dump.part.0+0x171/0x3a0
devlink_health_report+0x2f1/0x7e0
mlx5e_health_report+0xc9/0xd7 [mlx5_core]
mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core]
? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
? mutex_lock_io_nested+0x1320/0x1320
? process_one_work+0x70f/0x1340
? lockdep_hardirqs_on_prepare+0x400/0x400
? lock_downgrade+0x6e0/0x6e0
mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core]
process_one_work+0x7c2/0x1340
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0x230/0x230
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x59d/0xec0
? process_one_work+0x1340/0x1340
kthread+0x28f/0x330
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>

Fixes: c90005b5f75c ("devlink: Hold the instance lock in health callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Disable IPsec offload support if not FW steering

[ Upstream commit 762a55a54eec4217e4cec9265ab6e5d4c11b61bd ]

IPsec FDB offload can only work with FW steering as of now,
disable the cap upon non FW steering.

And since the IPSec cap is dynamic now based on steering mode.
Cleanup the resources if they exist instead of checking the
IPsec cap again.

Fixes: edd8b295f9e2 ("Merge branch 'mlx5-ipsec-packet-offload-support-in-eswitch-mode'")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Send events from IB driver about device affiliation state

[ Upstream commit 0d293714ac32650bfb669ceadf7cc2fad8161401 ]

Send blocking events from IB driver whenever the device is done being
affiliated or if it is removed from an affiliation.

This is useful since now the EN driver can register to those event and
know when a device is affiliated or not.

Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/a7491c3e483cfd8d962f5f75b9a25f253043384a.1695296682.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 762a55a54eec ("net/mlx5e: Disable IPsec offload support if not FW steering")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Check the number of elements before walk TC rhashtable

[ Upstream commit 4e25b661f484df54b6751b65f9ea2434a3b67539 ]

After IPSec TX tables are destroyed, the flow rules in TC rhashtable,
which have the destination to IPSec, are restored to the original
one, the uplink.

However, when the device is in switchdev mode and unload driver with
IPSec rules configured, TC rhashtable cleanup is done before IPSec
cleanup, which means tc_ht->tbl is already freed when walking TC
rhashtable, in order to restore the destination. So add the checking
before walking to avoid unexpected behavior.

Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Reduce eswitch mode_lock protection context

[ Upstream commit baac8351f74c543896b8fd40138b7ad9365587a3 ]

Currently eswitch mode_lock is so heavy, for example, it's locked
during the whole process of the mode change, which may need to hold
other locks. As the mode_lock is also used by IPSec to block mode and
encap change now, it is easy to cause lock dependency.

Since some of protections are also done by devlink lock, the eswitch
mode_lock is not needed at those places, and thus the possibility of
lockdep issue is reduced.

Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Tidy up IPsec NAT-T SA discovery

[ Upstream commit c2bf84f1d1a1595dcc45fe867f0e02b331993fee ]

IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones.
In case they arrive to RX, the SPI and ESP are located in inner header,
while the check was performed on outer header instead.

That wrong check caused to the situation where received rekeying request
was missed and caused to rekey timeout, which "compensated" this failure
by completing rekeying.

Fixes: d65954934937 ("net/mlx5e: Support IPsec NAT-T functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Unify esw and normal IPsec status table creation/destruction

[ Upstream commit 94af50c0a9bb961fe93cf0fdd14eb0883da86721 ]

Change normal IPsec flow to use the same creation/destruction functions
for status flow table as that of ESW, which first of all refines the
code to have less code duplication.

And more importantly, the ESW status table handles IPsec syndrome
checks at steering by HW, which is more efficient than the previous
behaviour we had where it was copied to WQE meta data and checked
by the driver.

Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Ensure that IPsec sequence packet number starts from 1

[ Upstream commit 3d42c8cc67a8fcbff0181f9ed6d03d353edcee07 ]

According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.

However if user didn't set seq/oseq, the HW used zero as first sequence
packet number. Such misconfiguration causes to drop of first packet
if replay window protection was enabled in SA.

To fix it, set sequence number to be at least 1.

Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Honor user choice of IPsec replay window size

[ Upstream commit a5e400a985df8041ed4659ed1462aa9134318130 ]

Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.

Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: lenovo: Restrict detection of patched firmware only to USB cptkbd

[ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ]

Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.

Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix refcount underflow from error handling race

[ Upstream commit 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 ]

If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL
server or fileserver), an asynchronous probe to one of its addresses may
fail immediately because sendmsg() returns an error.  When this happens, a
refcount underflow can happen if certain events hit a very small window.

The way this occurs is:

(1) There are two levels of "call" object, the afs_call and the
     rxrpc_call.  Each of them can be transitioned to a "completed" state
     in the event of success or failure.

(2) Asynchronous afs_calls are self-referential whilst they are active to
     prevent them from evaporating when they're not being processed.  This
     reference is disposed of when the afs_call is completed.

     Note that an afs_call may only be completed once; once completed
     completing it again will do nothing.

(3) When a call transmission is made, the app-side rxrpc code queues a Tx
     buffer for the rxrpc I/O thread to transmit.  The I/O thread invokes
     sendmsg() to transmit it - and in the case of failure, it transitions
     the rxrpc_call to the completed state.

(4) When an rxrpc_call is completed, the app layer is notified.  In this
     case, the app is kafs and it schedules a work item to process events
     pertaining to an afs_call.

(5) When the afs_call event processor is run, it goes down through the
     RPC-specific handler to afs_extract_data() to retrieve data from rxrpc
     - and, in this case, it picks up the error from the rxrpc_call and
     returns it.

     The error is then propagated to the afs_call and that is completed
     too.  At this point the self-reference is released.

(6) If the rxrpc I/O thread manages to complete the rxrpc_call within the
     window between rxrpc_send_data() queuing the request packet and
     checking for call completion on the way out, then
     rxrpc_kernel_send_data() will return the error from sendmsg() to the
     app.

(7) Then afs_make_call() will see an error and will jump to the error
     handling path which will attempt to clean up the afs_call.

(8) The problem comes when the error handling path in afs_make_call()
     tries to unconditionally drop an async afs_call's self-reference.
     This self-reference, however, may already have been dropped by
     afs_extract_data() completing the afs_call

(9) The refcount underflows when we return to afs_do_probe_vlserver() and
     that tries to drop its reference on the afs_call.

Fix this by making afs_make_call() attempt to complete the afs_call rather
than unconditionally putting it.  That way, if afs_extract_data() manages
to complete the call first, afs_make_call() won't do anything.

The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and
sticking an msleep() in rxrpc_send_data() after the 'success:' label to
widen the race window.

The error message looks something like:

    refcount_t: underflow; use-after-free.
    WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
    ...
    RIP: 0010:refcount_warn_saturate+0xba/0x110
    ...
    afs_put_call+0x1dc/0x1f0 [kafs]
    afs_fs_get_capabilities+0x8b/0xe0 [kafs]
    afs_fs_probe_fileserver+0x188/0x1e0 [kafs]
    afs_lookup_server+0x3bf/0x3f0 [kafs]
    afs_alloc_server_list+0x130/0x2e0 [kafs]
    afs_create_volume+0x162/0x400 [kafs]
    afs_get_tree+0x266/0x410 [kafs]
    vfs_get_tree+0x25/0xc0
    fc_mount+0xe/0x40
    afs_d_automount+0x1b3/0x390 [kafs]
    __traverse_mounts+0x8f/0x210
    step_into+0x340/0x760
    path_openat+0x13a/0x1260
    do_filp_open+0xaf/0x160
    do_sys_openat2+0xaf/0x170

or something like:

    refcount_t: underflow; use-after-free.
    ...
    RIP: 0010:refcount_warn_saturate+0x99/0xda
    ...
    afs_put_call+0x4a/0x175
    afs_send_vl_probes+0x108/0x172
    afs_select_vlserver+0xd6/0x311
    afs_do_cell_detect_alias+0x5e/0x1e9
    afs_cell_detect_alias+0x44/0x92
    afs_validate_fc+0x9d/0x134
    afs_get_tree+0x20/0x2e6
    vfs_get_tree+0x1d/0xc9
    fc_mount+0xe/0x33
    afs_d_automount+0x48/0x9d
    __traverse_mounts+0xe0/0x166
    step_into+0x140/0x274
    open_last_lookups+0x1c1/0x1df
    path_openat+0x138/0x1c3
    do_filp_open+0x55/0xb4
    do_sys_openat2+0x6c/0xb6

Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Bill MacAllister <bill@ca-zephyr.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Avoid physical KASLR on older Dell systems

[ Upstream commit 50d7cdf7a9b1ab6f4f74a69c84e974d5dc0c1bf1 ]

River reports boot hangs with v6.6 and v6.7, and the bisect points to
commit

a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")

which moves the memory allocation and kernel decompression from the
legacy decompressor (which executes *after* ExitBootServices()) to the
EFI stub, using boot services for allocating the memory. The memory
allocation succeeds but the subsequent call to decompress_kernel() never
returns, resulting in a failed boot and a hanging system.

As it turns out, this issue only occurs when physical address
randomization (KASLR) is enabled, and given that this is a feature we
can live without (virtual KASLR is much more important), let's disable
the physical part of KASLR when booting on AMI UEFI firmware claiming to
implement revision v2.0 of the specification (which was released in
2006), as this is the version these systems advertise.

Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: fix memory leak in smb2_lock()

[ Upstream commit 8f1752723019db900fb60a5b9d0dfd3a2bdea36c ]

In smb2_lock(), if setup_async_work() executes successfully,
work->cancel_argv will bind the argv that generated by kmalloc(). And
release_async_work() is called in ksmbd_conn_try_dequeue_request() or
smb2_lock() to release argv.
However, when setup_async_work function fails, work->cancel_argv has not
been bound to the argv, resulting in the previously allocated argv not
being released. Call kfree() to fix it.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix warning in ext4_dio_write_end_io()

[ Upstream commit 619f75dae2cf117b1d07f27b046b9ffb071c4685 ]

The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.

Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com>
Fixes: 91562895f803 ("ext4: properly sync file size update after O_SYNC direct IO")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: add vendor/device ID pair for ASUS USB-C2500

[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ]

The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.

Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.

Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.6.7

Link: https://lore.kernel.org/r/20231211182045.784881756@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Restrict extended wait to PSP v13.0.6

[ Upstream commit 6fce23a4d8c5f93bf80b7f122449fbb97f1e40dd ]

Only PSPv13.0.6 SOCs take a longer time to reach steady state. Other
PSPv13 based SOCs don't need extended wait. Also, reduce PSPv13.0.6 wait
time.

Cc: stable@vger.kernel.org
Fixes: fc5988907156 ("drm/amdgpu: update retry times for psp vmbx wait")
Fixes: d8c1925ba8cd ("drm/amdgpu: update retry times for psp BL wait")
Link: https://lore.kernel.org/amd-gfx/34dd4c66-f7bf-44aa-af8f-c82889dd652c@amd.com/
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: update retry times for psp BL wait

[ Upstream commit d8c1925ba8cde2863297728a4c8fbf8fe766757a ]

Increase retry time for PSP BL wait, to compensate
for longer time to set c2pmsg 35 ready bit during
mode1 with RAS

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6fce23a4d8c5 ("drm/amdgpu: Restrict extended wait to PSP v13.0.6")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix refclk reporting for SMU v13.0.6

[ Upstream commit 6b7d211740da2c3a7656be8cbb36f32e6d9c6cbd ]

SMU v13.0.6 SOCs have 100MHz reference clock.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6fce23a4d8c5 ("drm/amdgpu: Restrict extended wait to PSP v13.0.6")
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Kconfig: Add select ARM_AMBA to SOC_STARFIVE

commit 78a03b9f8e6b317f7c65738a3fc60e1e85106a64 upstream.

Selects ARM_AMBA platform support for StarFive SoCs required by spi and
crypto dma engine.

Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Nam Cao <namcao@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-plugins: randstruct: Update code comment in relayout_struct()

commit d71f22365a9caca82d424f3a33445de46567e198 upstream.

Update code comment to clarify that the only element whose layout is
not randomized is a proper C99 flexible-array member. This update is
complementary to commit 1ee60356c2dc ("gcc-plugins: randstruct: Only
warn about true flexible arrays")

Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZWJr2MWDjXLHE8ap@work
Fixes: 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qcom: sc8280xp: Limit speaker digital volumes

commit 716d4e5373e9d1ae993485ab2e3b893bf7104fb1 upstream.

Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ johan: backport to 6.6; rename snd_soc_rtd_to_cpu() ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_set_pipapo: skip inactive elements during set walk

commit 317eb9685095678f2c9f5a8189de698c5354316a upstream.

Otherwise set elements can be deactivated twice which will cause a crash.

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Loongson64: Enable DMA noncoherent support

commit edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 upstream.

There are some Loongson64 systems come with broken coherent DMA
support, firmware will set a bit in boot_param and pass nocoherentio
in cmdline.

However nonconherent support was missed out when spin off Loongson-2EF
form Loongson64, and that boot_param change never made itself into
upstream.

Support DMA noncoherent properly to get those systems working.

Cc: stable@vger.kernel.org
Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>