config NEEDS_MANUAL_RELOC
bool
+config SYS_CACHE_SHIFT_4
+ bool
+
+config SYS_CACHE_SHIFT_5
+ bool
+
+config SYS_CACHE_SHIFT_6
+ bool
+
+config SYS_CACHE_SHIFT_7
+ bool
+
+config SYS_CACHELINE_SIZE
+ int
+ default 128 if SYS_CACHE_SHIFT_7
+ default 64 if SYS_CACHE_SHIFT_6
+ default 32 if SYS_CACHE_SHIFT_5
+ default 16 if SYS_CACHE_SHIFT_4
+ # Fall-back for MIPS
+ default 32 if MIPS
+
config LINKER_LIST_ALIGN
int
default 32 if SANDBOX
select DM
select HAVE_PRIVATE_LIBGCC
select SUPPORT_OF_CONTROL
+ select SYS_CACHE_SHIFT_7
select TIMER
config ARM
select NEEDS_MANUAL_RELOC
select SYS_BOOT_GET_CMDLINE
select SYS_BOOT_GET_KBD
+ select SYS_CACHE_SHIFT_4
select SUPPORT_OF_CONTROL
config MICROBLAZE
select SPI
select SUPPORT_OF_CONTROL
select SYSRESET_CMD_POWEROFF
+ select SYS_CACHE_SHIFT_4
select IRQ
select SUPPORT_EXTENSION_SCAN
imply BITREVERSE
select OF_CONTROL
select PCI
select SUPPORT_OF_CONTROL
+ select SYS_CACHE_SHIFT_6
select TIMER
select USE_PRIVATE_LIBGCC
select X86_TSC_TIMER
*/
#define ARCH_DMA_MINALIGN 128
-/* CONFIG_SYS_CACHELINE_SIZE is used a lot in drivers */
-#define CONFIG_SYS_CACHELINE_SIZE ARCH_DMA_MINALIGN
-
#if defined(ARC_MMU_ABSENT)
#define CONFIG_ARC_MMU_VER 0
#elif defined(CONFIG_ARC_MMU_V2)
default 4 if CPU_SA1100
default 8 if ARM64
-config SYS_CACHE_SHIFT_5
- bool
-
-config SYS_CACHE_SHIFT_6
- bool
-
-config SYS_CACHE_SHIFT_7
- bool
-
-config SYS_CACHELINE_SIZE
- int
- default 128 if SYS_CACHE_SHIFT_7
- default 64 if SYS_CACHE_SHIFT_6
- default 32 if SYS_CACHE_SHIFT_5
-
choice
prompt "Select the ARM data write cache policy"
default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || \
select DYNAMIC_IO_PORT_BASE
select MIPS_CM
select MIPS_INSERT_BOOT_CONFIG
- select MIPS_L1_CACHE_SHIFT_6
+ select SYS_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_CONTROL
select OF_ISA_BUS
select DM
select DM_SERIAL
select MIPS_CM
- select MIPS_L1_CACHE_SHIFT_6
+ select SYS_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_BOARD_SETUP
select OF_CONTROL
select DM_ETH
select DM_GPIO
select DM_SERIAL
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select OF_CONTROL
select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
so if you know the cache configuration for your system at compile
time it would be beneficial to configure it.
-config MIPS_L1_CACHE_SHIFT_4
- bool
-
-config MIPS_L1_CACHE_SHIFT_5
- bool
-
-config MIPS_L1_CACHE_SHIFT_6
- bool
-
-config MIPS_L1_CACHE_SHIFT_7
- bool
-
-config MIPS_L1_CACHE_SHIFT
- int
- default "7" if MIPS_L1_CACHE_SHIFT_7
- default "6" if MIPS_L1_CACHE_SHIFT_6
- default "5" if MIPS_L1_CACHE_SHIFT_5
- default "4" if MIPS_L1_CACHE_SHIFT_4
- default "5"
-
config MIPS_L2_CACHE
bool
help
#ifndef __MIPS_CACHE_H__
#define __MIPS_CACHE_H__
-#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define ARCH_DMA_MINALIGN (L1_CACHE_BYTES)
-
-/*
- * CONFIG_SYS_CACHELINE_SIZE is still used in various drivers primarily for
- * DMA buffer alignment. Satisfy those drivers by providing it as a synonym
- * of ARCH_DMA_MINALIGN for now.
- */
-#define CONFIG_SYS_CACHELINE_SIZE ARCH_DMA_MINALIGN
+#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
#ifndef __ASSEMBLY__
/**
config SOC_BMIPS_BCM3380
bool "BMIPS BCM3380 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6318
bool "BMIPS BCM6318 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6328
bool "BMIPS BCM6328 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6338
bool "BMIPS BCM6338 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6348
bool "BMIPS BCM6348 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6358
bool "BMIPS BCM6358 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6368
bool "BMIPS BCM6368 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6362
bool "BMIPS BCM6362 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM63268
bool "BMIPS BCM63268 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_BMIPS_BCM6838
bool "BMIPS BCM6838 family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
config SOC_MT7620
bool "MT7620"
- select MIPS_L1_CACHE_SHIFT_5
+ select SYS_CACHE_SHIFT_5
select SYS_MIPS_CACHE_INIT_RAM_LOAD
select PINCTRL_MT7620
select MT7620_SERIAL
config SOC_MT7628
bool "MT7628"
- select MIPS_L1_CACHE_SHIFT_5
+ select SYS_CACHE_SHIFT_5
select MIPS_INIT_STACK_IN_SRAM
select MIPS_SRAM_INIT
select SYS_MIPS_CACHE_INIT_RAM_LOAD
config SOC_PIC32MZDA
bool "Microchip PIC32MZ[DA] family"
- select MIPS_L1_CACHE_SHIFT_4
+ select SYS_CACHE_SHIFT_4
select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
config ARCH_MPC830X
bool
select MPC83XX_SDHC_SUPPORT
+ select SYS_CACHE_SHIFT_5
config ARCH_MPC8308
bool
select MPC83XX_PCI_SUPPORT
select MPC83XX_TSEC1_SUPPORT
select MPC83XX_TSEC2_SUPPORT
+ select SYS_CACHE_SHIFT_5
config ARCH_MPC8313
bool
bool
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
+ select SYS_CACHE_SHIFT_5
config ARCH_MPC834X
bool
+ select SYS_CACHE_SHIFT_5
config ARCH_MPC8349
bool
select MPC83XX_PCI_SUPPORT
select MPC83XX_LDP_PIN
select MPC83XX_SECOND_I2C
+ select SYS_CACHE_SHIFT_5
config ARCH_MPC837X
bool
select MPC83XX_SATA_SUPPORT
select MPC83XX_LDP_PIN
select MPC83XX_SECOND_I2C
+ select SYS_CACHE_SHIFT_5
select FSL_ELBC
config SYS_IMMR
bool "Support MPC8548CDS"
select ARCH_MPC8548
select FSL_VIA
+ select SYS_CACHE_SHIFT_5
config TARGET_P1010RDB_PA
bool "Support P1010RDB_PA"
config ARCH_MPC8544
bool
select FSL_LAW
+ select SYS_CACHE_SHIFT_5
select SYS_FSL_ERRATUM_A005125
select FSL_PCIE_RESET
select SYS_FSL_HAS_DDR2
config ARCH_P1010
bool
select FSL_LAW
+ select SYS_CACHE_SHIFT_5
select SYS_FSL_ERRATUM_A004477
select SYS_FSL_ERRATUM_A004508
select SYS_FSL_ERRATUM_A005125
config ARCH_P1020
bool
select FSL_LAW
+ select SYS_CACHE_SHIFT_5
select SYS_FSL_ERRATUM_A004508
select SYS_FSL_ERRATUM_A005125
select SYS_FSL_ERRATUM_ELBC_A001
config ARCH_P2020
bool
select FSL_LAW
+ select SYS_CACHE_SHIFT_5
select SYS_FSL_ERRATUM_A004477
select SYS_FSL_ERRATUM_A004508
select SYS_FSL_ERRATUM_A005125
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_ERRATUM_A004510
select SYS_FSL_ERRATUM_A004849
select SYS_FSL_ERRATUM_A005275
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_44
select SYS_FSL_ERRATUM_A004510
select SYS_FSL_ERRATUM_A004849
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_44
select SYS_FSL_ERRATUM_A004510
select SYS_FSL_ERRATUM_A004580
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_44
select SYS_FSL_ERRATUM_A004510
select SYS_FSL_ERRATUM_A004699
config ARCH_QEMU_E500
bool
+ select SYS_CACHE_SHIFT_5
config ARCH_T1024
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008378
select SYS_FSL_ERRATUM_A008109
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008044
select SYS_FSL_ERRATUM_A008378
bool
select E500MC
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008044
select SYS_FSL_ERRATUM_A008378
select E500MC
select E6500
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_47
select SYS_FSL_ERRATUM_A006379
select SYS_FSL_ERRATUM_A006593
select E500MC
select E6500
select FSL_LAW
+ select SYS_CACHE_SHIFT_6
select SYS_FSL_DDR_VER_47
select SYS_FSL_ERRATUM_A004468
select SYS_FSL_ERRATUM_A005871
config MPC866
bool "MPC866"
+ select SYS_CACHE_SHIFT_4
config MPC885
bool "MPC885"
+ select SYS_CACHE_SHIFT_4
endchoice
*/
#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
-/*
- * For compatibility reasons support the CONFIG_SYS_CACHELINE_SIZE too
- */
-#ifndef CONFIG_SYS_CACHELINE_SIZE
-#define CONFIG_SYS_CACHELINE_SIZE L1_CACHE_BYTES
-#endif
-
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#define L1_CACHE_PAGES 8
config TARGET_SIFIVE_UNMATCHED
bool "Support SiFive Unmatched Board"
+ select SYS_CACHE_SHIFT_6
config TARGET_SIPEED_MAIX
bool "Support Sipeed Maix Board"
+ select SYS_CACHE_SHIFT_6
config TARGET_OPENPITON_RISCV64
bool "Support RISC-V cores on OpenPiton SoC"
#else
#define ARCH_DMA_MINALIGN 16
#endif
-#define CONFIG_SYS_CACHELINE_SIZE ARCH_DMA_MINALIGN
#endif /* __SANDBOX_CACHE_H__ */
#define __X86_CACHE_H__
/*
- * If CONFIG_SYS_CACHELINE_SIZE is defined use it for DMA alignment. Otherwise
- * use 64-bytes, a safe default for x86.
+ * Use CONFIG_SYS_CACHELINE_SIZE (which is set to 64-bytes) for DMA alignment.
*/
-#ifndef CONFIG_SYS_CACHELINE_SIZE
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#endif
-
#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
static inline void wbinvd(void)
env/embedded.o(.text*);
/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
#endif
/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
* This is a single unified instruction/data cache.
* sdram - single region - no masks
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
#endif
/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
/* UART */
#define LPUART_BASE LPUART4_RBASE
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 512
#ifndef __CONFIG_RK3188_COMMON_H
#define __CONFIG_RK3188_COMMON_H
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
#include <asm/arch-rockchip/hardware.h>
#include "rockchip-common.h"
#include "rockchip-common.h"
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
#include <asm/arch-rockchip/hardware.h>
#include <linux/sizes.h>
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit resources */
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
/* Environment options */
#ifndef CONFIG_SPL_BUILD
/* Start just below the second bank so we don't clobber it during reloc */
#define CONFIG_SYS_INIT_SP_ADDR 0x803FFFFF
#define CONFIG_SYS_MALLOC_LEN SZ_128K
-#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_SIZE SZ_8M
#endif
/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
projects / platform / kernel / u-boot.git / commitdiff