This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it. As this is also the last in family remove the related
support as well.
Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
bool
select MCF5441x
-config M52277
- bool
- select MCF5227x
-
choice
prompt "Target select"
optional
-config TARGET_M52277EVB
- bool "Support M52277EVB"
- select M52277
-
config TARGET_M5235EVB
bool "Support M5235EVB"
select M5235
source "board/astro/mcf5373l/Kconfig"
source "board/cobra5272/Kconfig"
source "board/freescale/m5208evbe/Kconfig"
-source "board/freescale/m52277evb/Kconfig"
source "board/freescale/m5235evb/Kconfig"
source "board/freescale/m5249evb/Kconfig"
source "board/freescale/m5253demo/Kconfig"
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5227x.dtsi"
-
-/ {
- model = "Freescale M52277EVB";
- compatible = "fsl,M52277EVB";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&uart0 {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
-&dspi0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5227x.dtsi"
-
-/ {
- model = "Freescale M52277_stmicro";
- compatible = "fsl,M52277_stmicro";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&uart0 {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
# SPDX-License-Identifier: GPL-2.0+
-dtb-$(CONFIG_TARGET_M52277EVB) += M52277EVB.dtb \
- M52277EVB_stmicro.dtb
dtb-$(CONFIG_TARGET_M5235EVB) += M5235EVB.dtb \
M5235EVB_Flash32.dtb
dtb-$(CONFIG_TARGET_COBRA5272) += cobra5272.dtb
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/ {
- compatible = "fsl,mcf5227x";
-
- aliases {
- serial0 = &uart0;
- spi0 = &dspi0;
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uart0: uart@fc060000 {
- compatible = "fsl,mcf-uart";
- reg = <0xfc060000 0x40>;
- status = "disabled";
- };
-
- uart1: uart@fc064000 {
- compatible = "fsl,mcf-uart";
- reg = <0xfc064000 0x40>;
- status = "disabled";
- };
-
- uart2: uart@fc068000 {
- compatible = "fsl,mcf-uart";
- reg = <0xfc068000 0x40>;
- status = "disabled";
- };
-
- dspi0: dspi@fc05c000 {
- compatible = "fsl,mcf-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfc05c000 0x100>;
- spi-max-frequency = <50000000>;
- num-cs = <4>;
- spi-mode = <0>;
- status = "disabled";
- };
- };
-};
#define __CACHE_H
#if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \
- defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x)
+ defined(CONFIG_MCF52x2)
#define CONFIG_CF_V2
#endif
#define CONFIG_SYS_NUM_IRQS (128)
#endif /* CONFIG_M520x */
-#ifdef CONFIG_M52277
-#include <asm/immap_5227x.h>
-#include <asm/m5227x.h>
-
-#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-
-#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC)
-
-#ifdef CONFIG_LCD
-#define CONFIG_SYS_LCD_BASE (MMAP_LCD)
-#endif
-
-/* Timer */
-#ifdef CONFIG_MCFTMR
-#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0)
-#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1)
-#define CONFIG_SYS_TMRPND_REG (((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
-#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1)
-#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33)
-#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK)
-#define CONFIG_SYS_TMRINTR_PRI (6)
-#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8)
-#endif
-
-#define CONFIG_SYS_INTR_BASE (MMAP_INTC0)
-#define CONFIG_SYS_NUM_IRQS (128)
-#endif /* CONFIG_M52277 */
-
#ifdef CONFIG_M5235
#include <asm/immap_5235.h>
#include <asm/m5235.h>
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5227x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __IMMAP_5227X__
-#define __IMMAP_5227X__
-
-/* Module Base Addresses */
-#define MMAP_SCM1 (CONFIG_SYS_MBAR + 0x00000000)
-#define MMAP_XBS (CONFIG_SYS_MBAR + 0x00004000)
-#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00008000)
-#define MMAP_CAN (CONFIG_SYS_MBAR + 0x00020000)
-#define MMAP_RTC (CONFIG_SYS_MBAR + 0x0003C000)
-#define MMAP_SCM2 (CONFIG_SYS_MBAR + 0x00040010)
-#define MMAP_SCM3 (CONFIG_SYS_MBAR + 0x00040070)
-#define MMAP_EDMA (CONFIG_SYS_MBAR + 0x00044000)
-#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00048000)
-#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x0004C000)
-#define MMAP_IACK (CONFIG_SYS_MBAR + 0x00054000)
-#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00058000)
-#define MMAP_DSPI (CONFIG_SYS_MBAR + 0x0005C000)
-#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00060000)
-#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00064000)
-#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00068000)
-#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00070000)
-#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00074000)
-#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00078000)
-#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x0007C000)
-#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00080000)
-#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00084000)
-#define MMAP_PWM (CONFIG_SYS_MBAR + 0x00090000)
-#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00094000)
-#define MMAP_RCM (CONFIG_SYS_MBAR + 0x000A0000)
-#define MMAP_CCM (CONFIG_SYS_MBAR + 0x000A0004)
-#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x000A4000)
-#define MMAP_ADC (CONFIG_SYS_MBAR + 0x000A8000)
-#define MMAP_LCD (CONFIG_SYS_MBAR + 0x000AC000)
-#define MMAP_LCD_BGLUT (CONFIG_SYS_MBAR + 0x000AC800)
-#define MMAP_LCD_GWLUT (CONFIG_SYS_MBAR + 0x000ACC00)
-#define MMAP_USBHW (CONFIG_SYS_MBAR + 0x000B0000)
-#define MMAP_USBCAPS (CONFIG_SYS_MBAR + 0x000B0100)
-#define MMAP_USBEHCI (CONFIG_SYS_MBAR + 0x000B0140)
-#define MMAP_USBOTG (CONFIG_SYS_MBAR + 0x000B01A0)
-#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x000B8000)
-#define MMAP_SSI (CONFIG_SYS_MBAR + 0x000BC000)
-#define MMAP_PLL (CONFIG_SYS_MBAR + 0x000C0000)
-
-#include <asm/coldfire/crossbar.h>
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/edma.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/flexcan.h>
-#include <asm/coldfire/intctrl.h>
-#include <asm/coldfire/lcd.h>
-#include <asm/coldfire/pwm.h>
-#include <asm/coldfire/ssi.h>
-
-/* Reset Controller Module (RCM) */
-typedef struct rcm {
- u8 rcr;
- u8 rsr;
-} rcm_t;
-
-/* Chip Configuration Module (CCM) */
-typedef struct ccm {
- u16 ccr; /* Chip Configuration (Rd-only) */
- u16 resv1;
- u16 rcon; /* Reset Configuration (Rd-only) */
- u16 cir; /* Chip Identification (Rd-only) */
- u32 resv2;
- u16 misccr; /* Miscellaneous Control */
- u16 cdr; /* Clock Divider */
- u16 uocsr; /* USB On-the-Go Controller Status */
- u16 resv4;
- u16 sbfsr; /* Serial Boot Status */
- u16 sbfcr; /* Serial Boot Control */
-} ccm_t;
-
-typedef struct canex_ctrl {
- can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */
- u32 res0[0x700]; /* 0x100 */
- can_msg_t rxim[16]; /* 0x800 Rx Individual Mask 0-15 */
-} canex_t;
-
-/* General Purpose I/O Module (GPIO) */
-typedef struct gpio {
- /* Port Output Data Registers */
- u8 podr_be; /* 0x00 */
- u8 podr_cs; /* 0x01 */
- u8 podr_fbctl; /* 0x02 */
- u8 podr_i2c; /* 0x03 */
- u8 rsvd1; /* 0x04 */
- u8 podr_uart; /* 0x05 */
- u8 podr_dspi; /* 0x06 */
- u8 podr_timer; /* 0x07 */
- u8 podr_lcdctl; /* 0x08 */
- u8 podr_lcddatah; /* 0x09 */
- u8 podr_lcddatam; /* 0x0A */
- u8 podr_lcddatal; /* 0x0B */
-
- /* Port Data Direction Registers */
- u8 pddr_be; /* 0x0C */
- u8 pddr_cs; /* 0x0D */
- u8 pddr_fbctl; /* 0x0E */
- u8 pddr_i2c; /* 0x0F */
- u8 rsvd2; /* 0x10 */
- u8 pddr_uart; /* 0x11 */
- u8 pddr_dspi; /* 0x12 */
- u8 pddr_timer; /* 0x13 */
- u8 pddr_lcdctl; /* 0x14 */
- u8 pddr_lcddatah; /* 0x15 */
- u8 pddr_lcddatam; /* 0x16 */
- u8 pddr_lcddatal; /* 0x17 */
-
- /* Port Pin Data/Set Data Registers */
- u8 ppdsdr_be; /* 0x18 */
- u8 ppdsdr_cs; /* 0x19 */
- u8 ppdsdr_fbctl; /* 0x1A */
- u8 ppdsdr_i2c; /* 0x1B */
- u8 rsvd3; /* 0x1C */
- u8 ppdsdr_uart; /* 0x1D */
- u8 ppdsdr_dspi; /* 0x1E */
- u8 ppdsdr_timer; /* 0x1F */
- u8 ppdsdr_lcdctl; /* 0x20 */
- u8 ppdsdr_lcddatah; /* 0x21 */
- u8 ppdsdr_lcddatam; /* 0x22 */
- u8 ppdsdr_lcddatal; /* 0x23 */
-
- /* Port Clear Output Data Registers */
- u8 pclrr_be; /* 0x24 */
- u8 pclrr_cs; /* 0x25 */
- u8 pclrr_fbctl; /* 0x26 */
- u8 pclrr_i2c; /* 0x27 */
- u8 rsvd4; /* 0x28 */
- u8 pclrr_uart; /* 0x29 */
- u8 pclrr_dspi; /* 0x2A */
- u8 pclrr_timer; /* 0x2B */
- u8 pclrr_lcdctl; /* 0x2C */
- u8 pclrr_lcddatah; /* 0x2D */
- u8 pclrr_lcddatam; /* 0x2E */
- u8 pclrr_lcddatal; /* 0x2F */
-
- /* Pin Assignment Registers */
- u8 par_be; /* 0x30 */
- u8 par_cs; /* 0x31 */
- u8 par_fbctl; /* 0x32 */
- u8 par_i2c; /* 0x33 */
- u16 par_uart; /* 0x34 */
- u8 par_dspi; /* 0x36 */
- u8 par_timer; /* 0x37 */
- u8 par_lcdctl; /* 0x38 */
- u8 par_irq; /* 0x39 */
- u16 rsvd6; /* 0x3A - 0x3B */
- u32 par_lcdh; /* 0x3C */
- u32 par_lcdl; /* 0x40 */
-
- /* Mode select control registers */
- u8 mscr_fb; /* 0x44 */
- u8 mscr_sdram; /* 0x45 */
-
- u16 rsvd7; /* 0x46 - 0x47 */
- u8 dscr_dspi; /* 0x48 */
- u8 dscr_timer; /* 0x49 */
- u8 dscr_i2c; /* 0x4A */
- u8 dscr_lcd; /* 0x4B */
- u8 dscr_debug; /* 0x4C */
- u8 dscr_clkrst; /* 0x4D */
- u8 dscr_irq; /* 0x4E */
- u8 dscr_uart; /* 0x4F */
-} gpio_t;
-
-/* SDRAM Controller (SDRAMC) */
-typedef struct sdramc {
- u32 sdmr; /* Mode/Extended Mode */
- u32 sdcr; /* Control */
- u32 sdcfg1; /* Configuration 1 */
- u32 sdcfg2; /* Chip Select */
- u8 resv0[0x100];
- u32 sdcs0; /* Mode/Extended Mode */
- u32 sdcs1; /* Mode/Extended Mode */
-} sdramc_t;
-
-/* Phase Locked Loop (PLL) */
-typedef struct pll {
- u32 pcr; /* PLL Control */
- u32 psr; /* PLL Status */
-} pll_t;
-
-/* System Control Module register */
-typedef struct scm1 {
- u32 mpr; /* 0x00 Master Privilege */
- u32 rsvd1[7];
- u32 pacra; /* 0x20 */
- u32 pacrb; /* 0x24 */
- u32 pacrc; /* 0x28 */
- u32 pacrd; /* 0x2C */
- u32 rsvd2[4];
- u32 pacre; /* 0x40 */
- u32 pacrf; /* 0x44 */
- u32 pacrg; /* 0x48 */
- u32 rsvd3;
- u32 pacri; /* 0x50 */
-} scm1_t;
-
-typedef struct scm2_ctrl {
- u8 res1[3]; /* 0x00 - 0x02 */
- u8 wcr; /* 0x03 wakeup control */
- u16 res2; /* 0x04 - 0x05 */
- u16 cwcr; /* 0x06 Core Watchdog Control */
- u8 res3[3]; /* 0x08 - 0x0A */
- u8 cwsr; /* 0x0B Core Watchdog Service */
- u8 res4[2]; /* 0x0C - 0x0D */
- u8 scmisr; /* 0x0F Interrupt Status */
- u32 res5; /* 0x20 */
- u32 bcr; /* 0x24 Burst Configuration */
-} scm2_t;
-
-typedef struct scm3_ctrl {
- u32 cfadr; /* 0x00 Core Fault Address */
- u8 res7; /* 0x04 */
- u8 cfier; /* 0x05 Core Fault Interrupt Enable */
- u8 cfloc; /* 0x06 Core Fault Location */
- u8 cfatr; /* 0x07 Core Fault Attributes */
- u32 cfdtr; /* 0x08 Core Fault Data */
-} scm3_t;
-
-typedef struct rtcex {
- u32 rsvd1[3];
- u32 gocu;
- u32 gocl;
-} rtcex_t;
-#endif /* __IMMAP_5227X__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5227x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __MCF5227X__
-#define __MCF5227X__
-
-/* Interrupt Controller (INTC) */
-#define INT0_LO_RSVD0 (0)
-#define INT0_LO_EPORT1 (1)
-#define INT0_LO_EPORT4 (4)
-#define INT0_LO_EPORT7 (7)
-#define INT0_LO_EDMA_00 (8)
-#define INT0_LO_EDMA_01 (9)
-#define INT0_LO_EDMA_02 (10)
-#define INT0_LO_EDMA_03 (11)
-#define INT0_LO_EDMA_04 (12)
-#define INT0_LO_EDMA_05 (13)
-#define INT0_LO_EDMA_06 (14)
-#define INT0_LO_EDMA_07 (15)
-#define INT0_LO_EDMA_08 (16)
-#define INT0_LO_EDMA_09 (17)
-#define INT0_LO_EDMA_10 (18)
-#define INT0_LO_EDMA_11 (19)
-#define INT0_LO_EDMA_12 (20)
-#define INT0_LO_EDMA_13 (21)
-#define INT0_LO_EDMA_14 (22)
-#define INT0_LO_EDMA_15 (23)
-#define INT0_LO_EDMA_ERR (24)
-#define INT0_LO_SCM_CWIC (25)
-#define INT0_LO_UART0 (26)
-#define INT0_LO_UART1 (27)
-#define INT0_LO_UART2 (28)
-#define INT0_LO_I2C (30)
-#define INT0_LO_DSPI (31)
-#define INT0_HI_DTMR0 (32)
-#define INT0_HI_DTMR1 (33)
-#define INT0_HI_DTMR2 (34)
-#define INT0_HI_DTMR3 (35)
-#define INT0_HI_SCMIR (62)
-#define INT0_HI_RTC_ISR (63)
-
-#define INT1_HI_CAN_BOFFINT (1)
-#define INT1_HI_CAN_ERRINT (3)
-#define INT1_HI_CAN_BUF0I (4)
-#define INT1_HI_CAN_BUF1I (5)
-#define INT1_HI_CAN_BUF2I (6)
-#define INT1_HI_CAN_BUF3I (7)
-#define INT1_HI_CAN_BUF4I (8)
-#define INT1_HI_CAN_BUF5I (9)
-#define INT1_HI_CAN_BUF6I (10)
-#define INT1_HI_CAN_BUF7I (11)
-#define INT1_HI_CAN_BUF8I (12)
-#define INT1_HI_CAN_BUF9I (13)
-#define INT1_HI_CAN_BUF10I (14)
-#define INT1_HI_CAN_BUF11I (15)
-#define INT1_HI_CAN_BUF12I (16)
-#define INT1_HI_CAN_BUF13I (17)
-#define INT1_HI_CAN_BUF14I (18)
-#define INT1_HI_CAN_BUF15I (19)
-#define INT1_HI_PIT0_PIF (43)
-#define INT1_HI_PIT1_PIF (44)
-#define INT1_HI_USBOTG_STS (47)
-#define INT1_HI_SSI_ISR (49)
-#define INT1_HI_PWM_INT (50)
-#define INT1_HI_LCDC_ISR (51)
-#define INT1_HI_CCM_UOCSR (53)
-#define INT1_HI_DSPI_EOQF (54)
-#define INT1_HI_DSPI_TFFF (55)
-#define INT1_HI_DSPI_TCF (56)
-#define INT1_HI_DSPI_TFUF (57)
-#define INT1_HI_DSPI_RFDF (58)
-#define INT1_HI_DSPI_RFOF (59)
-#define INT1_HI_DSPI_RFOF_TFUF (60)
-#define INT1_HI_TOUCH_ADC (61)
-#define INT1_HI_PLL_LOCKS (62)
-
-/*********************************************************************
-* Reset Controller Module (RCM)
-*********************************************************************/
-
-/* Bit definitions and macros for RCR */
-#define RCM_RCR_FRCRSTOUT (0x40)
-#define RCM_RCR_SOFTRST (0x80)
-
-/* Bit definitions and macros for RSR */
-#define RCM_RSR_LOL (0x01)
-#define RCM_RSR_WDR_CORE (0x02)
-#define RCM_RSR_EXT (0x04)
-#define RCM_RSR_POR (0x08)
-#define RCM_RSR_SOFT (0x20)
-
-/*********************************************************************
-* Chip Configuration Module (CCM)
-*********************************************************************/
-
-/* Bit definitions and macros for CCR */
-#define CCM_CCR_DRAMSEL (0x0100)
-#define CCM_CCR_CSC_UNMASK (0xFF3F)
-#define CCM_CCR_CSC_FBCS5_CS4 (0x00C0)
-#define CCM_CCR_CSC_FBCS5_A22 (0x0080)
-#define CCM_CCR_CSC_FB_A23_A22 (0x0040)
-#define CCM_CCR_LIMP (0x0020)
-#define CCM_CCR_LOAD (0x0010)
-#define CCM_CCR_BOOTPS_UNMASK (0xFFF3)
-#define CCM_CCR_BOOTPS_PS16 (0x0008)
-#define CCM_CCR_BOOTPS_PS8 (0x0004)
-#define CCM_CCR_BOOTPS_PS32 (0x0000)
-#define CCM_CCR_OSCMODE_OSCBYPASS (0x0002)
-
-/* Bit definitions and macros for RCON */
-#define CCM_RCON_CSC_UNMASK (0xFF3F)
-#define CCM_RCON_CSC_FBCS5_CS4 (0x00C0)
-#define CCM_RCON_CSC_FBCS5_A22 (0x0080)
-#define CCM_RCON_CSC_FB_A23_A22 (0x0040)
-#define CCM_RCON_LIMP (0x0020)
-#define CCM_RCON_LOAD (0x0010)
-#define CCM_RCON_BOOTPS_UNMASK (0xFFF3)
-#define CCM_RCON_BOOTPS_PS16 (0x0008)
-#define CCM_RCON_BOOTPS_PS8 (0x0004)
-#define CCM_RCON_BOOTPS_PS32 (0x0000)
-#define CCM_RCON_OSCMODE_OSCBYPASS (0x0002)
-
-/* Bit definitions and macros for CIR */
-#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6)
-#define CCM_CIR_PRN(x) ((x) & 0x003F)
-#define CCM_CIR_PIN_MCF52277 (0x0000)
-
-/* Bit definitions and macros for MISCCR */
-#define CCM_MISCCR_RTCSRC (0x4000)
-#define CCM_MISCCR_USBPUE (0x2000) /* USB transceiver pull-up */
-#define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */
-
-#define CCM_MISCCR_BME (0x0800) /* Bus monitor ext en bit */
-#define CCM_MISCCR_BMT_65536 (0)
-#define CCM_MISCCR_BMT_32768 (1)
-#define CCM_MISCCR_BMT_16384 (2)
-#define CCM_MISCCR_BMT_8192 (3)
-#define CCM_MISCCR_BMT_4096 (4)
-#define CCM_MISCCR_BMT_2048 (5)
-#define CCM_MISCCR_BMT_1024 (6)
-#define CCM_MISCCR_BMT_512 (7)
-
-#define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */
-#define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */
-#define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */
-#define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */
-#define CCM_MISCCR_LCDCHEN (0x0004) /* LCD Int CLK en */
-#define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense pol */
-#define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */
-
-/* Bit definitions and macros for CDR */
-#define CCM_CDR_USBDIV(x) (((x)&0x0003)<<12)
-#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clk div */
-#define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clk div */
-
-/* Bit definitions and macros for UOCSR */
-#define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (rd-only) */
-#define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (rd-only) */
-#define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (rd-only) */
-#define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor en (rd-only) */
-#define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (rd-only) */
-#define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */
-#define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */
-#define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */
-#define CCM_UOCSR_SEND (0x0010) /* Session end */
-#define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */
-#define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt en */
-#define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down en */
-
-/*********************************************************************
-* General Purpose I/O Module (GPIO)
-*********************************************************************/
-/* Bit definitions and macros for PAR_BE */
-#define GPIO_PAR_BE_UNMASK (0x0F)
-#define GPIO_PAR_BE_BE3_BE3 (0x08)
-#define GPIO_PAR_BE_BE3_GPIO (0x00)
-#define GPIO_PAR_BE_BE2_BE2 (0x04)
-#define GPIO_PAR_BE_BE2_GPIO (0x00)
-#define GPIO_PAR_BE_BE1_BE1 (0x02)
-#define GPIO_PAR_BE_BE1_GPIO (0x00)
-#define GPIO_PAR_BE_BE0_BE0 (0x01)
-#define GPIO_PAR_BE_BE0_GPIO (0x00)
-
-/* Bit definitions and macros for PAR_CS */
-#define GPIO_PAR_CS_CS3 (0x10)
-#define GPIO_PAR_CS_CS2 (0x08)
-#define GPIO_PAR_CS_CS1_FBCS1 (0x06)
-#define GPIO_PAR_CS_CS1_SDCS1 (0x04)
-#define GPIO_PAR_CS_CS1_GPIO (0x00)
-#define GPIO_PAR_CS_CS0 (0x01)
-
-/* Bit definitions and macros for PAR_FBCTL */
-#define GPIO_PAR_FBCTL_OE (0x80)
-#define GPIO_PAR_FBCTL_TA (0x40)
-#define GPIO_PAR_FBCTL_RW (0x20)
-#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7)
-#define GPIO_PAR_FBCTL_TS_FBTS (0x18)
-#define GPIO_PAR_FBCTL_TS_DMAACK (0x10)
-#define GPIO_PAR_FBCTL_TS_GPIO (0x00)
-
-/* Bit definitions and macros for PAR_FECI2C */
-#define GPIO_PAR_I2C_SCL_UNMASK (0xF3)
-#define GPIO_PAR_I2C_SCL_SCL (0x0C)
-#define GPIO_PAR_I2C_SCL_CANTXD (0x08)
-#define GPIO_PAR_I2C_SCL_U2TXD (0x04)
-#define GPIO_PAR_I2C_SCL_GPIO (0x00)
-
-#define GPIO_PAR_I2C_SDA_UNMASK (0xFC)
-#define GPIO_PAR_I2C_SDA_SDA (0x03)
-#define GPIO_PAR_I2C_SDA_CANRXD (0x02)
-#define GPIO_PAR_I2C_SDA_U2RXD (0x01)
-#define GPIO_PAR_I2C_SDA_GPIO (0x00)
-
-/* Bit definitions and macros for PAR_UART */
-#define GPIO_PAR_UART_U1CTS_UNMASK (0x3FFF)
-#define GPIO_PAR_UART_U1CTS_U1CTS (0xC000)
-#define GPIO_PAR_UART_U1CTS_SSIBCLK (0x8000)
-#define GPIO_PAR_UART_U1CTS_LCDCLS (0x4000)
-#define GPIO_PAR_UART_U1CTS_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U1RTS_UNMASK (0xCFFF)
-#define GPIO_PAR_UART_U1RTS_U1RTS (0x3000)
-#define GPIO_PAR_UART_U1RTS_SSIFS (0x2000)
-#define GPIO_PAR_UART_U1RTS_LCDPS (0x1000)
-#define GPIO_PAR_UART_U1RTS_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U1RXD_UNMASK (0xF3FF)
-#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00)
-#define GPIO_PAR_UART_U1RXD_SSIRXD (0x0800)
-#define GPIO_PAR_UART_U1RXD_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U1TXD_UNMASK (0xFCFF)
-#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300)
-#define GPIO_PAR_UART_U1TXD_SSITXD (0x0200)
-#define GPIO_PAR_UART_U1TXD_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U0CTS_UNMASK (0xFF3F)
-#define GPIO_PAR_UART_U0CTS_U0CTS (0x00C0)
-#define GPIO_PAR_UART_U0CTS_T1OUT (0x0080)
-#define GPIO_PAR_UART_U0CTS_USBVBUSEN (0x0040)
-#define GPIO_PAR_UART_U0CTS_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFCF)
-#define GPIO_PAR_UART_U0RTS_U0RTS (0x0030)
-#define GPIO_PAR_UART_U0RTS_T1IN (0x0020)
-#define GPIO_PAR_UART_U0RTS_USBVBUSOC (0x0010)
-#define GPIO_PAR_UART_U0RTS_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U0RXD_UNMASK (0xFFF3)
-#define GPIO_PAR_UART_U0RXD_U0RXD (0x000C)
-#define GPIO_PAR_UART_U0RXD_CANRX (0x0008)
-#define GPIO_PAR_UART_U0RXD_GPIO (0x0000)
-
-#define GPIO_PAR_UART_U0TXD_UNMASK (0xFFFC)
-#define GPIO_PAR_UART_U0TXD_U0TXD (0x0003)
-#define GPIO_PAR_UART_U0TXD_CANTX (0x0002)
-#define GPIO_PAR_UART_U0TXD_GPIO (0x0000)
-
-/* Bit definitions and macros for PAR_DSPI */
-#define GPIO_PAR_DSPI_PCS0_UNMASK (0x3F)
-#define GPIO_PAR_DSPI_PCS0_PCS0 (0xC0)
-#define GPIO_PAR_DSPI_PCS0_U2RTS (0x80)
-#define GPIO_PAR_DSPI_PCS0_GPIO (0x00)
-#define GPIO_PAR_DSPI_SIN_UNMASK (0xCF)
-#define GPIO_PAR_DSPI_SIN_SIN (0x30)
-#define GPIO_PAR_DSPI_SIN_U2RXD (0x20)
-#define GPIO_PAR_DSPI_SIN_GPIO (0x00)
-#define GPIO_PAR_DSPI_SOUT_UNMASK (0xF3)
-#define GPIO_PAR_DSPI_SOUT_SOUT (0x0C)
-#define GPIO_PAR_DSPI_SOUT_U2TXD (0x08)
-#define GPIO_PAR_DSPI_SOUT_GPIO (0x00)
-#define GPIO_PAR_DSPI_SCK_UNMASK (0xFC)
-#define GPIO_PAR_DSPI_SCK_SCK (0x03)
-#define GPIO_PAR_DSPI_SCK_U2CTS (0x02)
-#define GPIO_PAR_DSPI_SCK_GPIO (0x00)
-
-/* Bit definitions and macros for PAR_TIMER */
-#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F)
-#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
-#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
-#define GPIO_PAR_TIMER_T3IN_SSIMCLK (0x40)
-#define GPIO_PAR_TIMER_T3IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF)
-#define GPIO_PAR_TIMER_T2IN_T2IN (0x30)
-#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
-#define GPIO_PAR_TIMER_T2IN_DSPIPCS2 (0x10)
-#define GPIO_PAR_TIMER_T2IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3)
-#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
-#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
-#define GPIO_PAR_TIMER_T1IN_LCDCONTRAST (0x04)
-#define GPIO_PAR_TIMER_T1IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC)
-#define GPIO_PAR_TIMER_T0IN_T0IN (0x03)
-#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
-#define GPIO_PAR_TIMER_T0IN_LCDREV (0x01)
-#define GPIO_PAR_TIMER_T0IN_GPIO (0x00)
-
-/* Bit definitions and macros for GPIO_PAR_LCDCTL */
-#define GPIO_PAR_LCDCTL_ACDOE_UNMASK (0xE7)
-#define GPIO_PAR_LCDCTL_ACDOE_ACDOE (0x18)
-#define GPIO_PAR_LCDCTL_ACDOE_SPLSPR (0x10)
-#define GPIO_PAR_LCDCTL_ACDOE_GPIO (0x00)
-#define GPIO_PAR_LCDCTL_FLM_VSYNC (0x04)
-#define GPIO_PAR_LCDCTL_LP_HSYNC (0x02)
-#define GPIO_PAR_LCDCTL_LSCLK (0x01)
-
-/* Bit definitions and macros for PAR_IRQ */
-#define GPIO_PAR_IRQ_IRQ4_UNMASK (0xF3)
-#define GPIO_PAR_IRQ_IRQ4_SSIINPCLK (0x0C)
-#define GPIO_PAR_IRQ_IRQ4_DMAREQ0 (0x08)
-#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00)
-#define GPIO_PAR_IRQ_IRQ1_UNMASK (0xFC)
-#define GPIO_PAR_IRQ_IRQ1_PCIINT (0x03)
-#define GPIO_PAR_IRQ_IRQ1_USBCLKIN (0x02)
-#define GPIO_PAR_IRQ_IRQ1_SSICLKIN (0x01)
-#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00)
-
-/* Bit definitions and macros for GPIO_PAR_LCDH */
-#define GPIO_PAR_LCDH_LD17_UNMASK (0xFFFFF3FF)
-#define GPIO_PAR_LCDH_LD17_LD17 (0x00000C00)
-#define GPIO_PAR_LCDH_LD17_LD11 (0x00000800)
-#define GPIO_PAR_LCDH_LD17_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDH_LD16_UNMASK (0xFFFFFCFF)
-#define GPIO_PAR_LCDH_LD16_LD16 (0x00000300)
-#define GPIO_PAR_LCDH_LD16_LD10 (0x00000200)
-#define GPIO_PAR_LCDH_LD16_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDH_LD15_UNMASK (0xFFFFFF3F)
-#define GPIO_PAR_LCDH_LD15_LD15 (0x000000C0)
-#define GPIO_PAR_LCDH_LD15_LD9 (0x00000080)
-#define GPIO_PAR_LCDH_LD15_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDH_LD14_UNMASK (0xFFFFFFCF)
-#define GPIO_PAR_LCDH_LD14_LD14 (0x00000030)
-#define GPIO_PAR_LCDH_LD14_LD8 (0x00000020)
-#define GPIO_PAR_LCDH_LD14_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDH_LD13_UNMASK (0xFFFFFFF3)
-#define GPIO_PAR_LCDH_LD13_LD13 (0x0000000C)
-#define GPIO_PAR_LCDH_LD13_CANTX (0x00000008)
-#define GPIO_PAR_LCDH_LD13_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDH_LD12_UNMASK (0xFFFFFFFC)
-#define GPIO_PAR_LCDH_LD12_LD12 (0x00000003)
-#define GPIO_PAR_LCDH_LD12_CANRX (0x00000002)
-#define GPIO_PAR_LCDH_LD12_GPIO (0x00000000)
-
-/* Bit definitions and macros for GPIO_PAR_LCDL */
-#define GPIO_PAR_LCDL_LD11_UNMASK (0x3FFFFFFF)
-#define GPIO_PAR_LCDL_LD11_LD11 (0xC0000000)
-#define GPIO_PAR_LCDL_LD11_LD7 (0x80000000)
-#define GPIO_PAR_LCDL_LD11_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD10_UNMASK (0xCFFFFFFF)
-#define GPIO_PAR_LCDL_LD10_LD10 (0x30000000)
-#define GPIO_PAR_LCDL_LD10_LD6 (0x20000000)
-#define GPIO_PAR_LCDL_LD10_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD9_UNMASK (0xF3FFFFFF)
-#define GPIO_PAR_LCDL_LD9_LD9 (0x0C000000)
-#define GPIO_PAR_LCDL_LD9_LD5 (0x08000000)
-#define GPIO_PAR_LCDL_LD9_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD8_UNMASK (0xFCFFFFFF)
-#define GPIO_PAR_LCDL_LD8_LD8 (0x03000000)
-#define GPIO_PAR_LCDL_LD8_LD4 (0x02000000)
-#define GPIO_PAR_LCDL_LD8_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD7_UNMASK (0xFF3FFFFF)
-#define GPIO_PAR_LCDL_LD7_LD7 (0x00C00000)
-#define GPIO_PAR_LCDL_LD7_PWM7 (0x00800000)
-#define GPIO_PAR_LCDL_LD7_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD6_UNMASK (0xFFCFFFFF)
-#define GPIO_PAR_LCDL_LD6_LD6 (0x00300000)
-#define GPIO_PAR_LCDL_LD6_PWM5 (0x00200000)
-#define GPIO_PAR_LCDL_LD6_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD5_UNMASK (0xFFF3FFFF)
-#define GPIO_PAR_LCDL_LD5_LD5 (0x000C0000)
-#define GPIO_PAR_LCDL_LD5_LD3 (0x00080000)
-#define GPIO_PAR_LCDL_LD5_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD4_UNMASK (0xFFFCFFFF)
-#define GPIO_PAR_LCDL_LD4_LD4 (0x00030000)
-#define GPIO_PAR_LCDL_LD4_LD2 (0x00020000)
-#define GPIO_PAR_LCDL_LD4_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD3_UNMASK (0xFFFF3FFF)
-#define GPIO_PAR_LCDL_LD3_LD3 (0x0000C000)
-#define GPIO_PAR_LCDL_LD3_LD1 (0x00008000)
-#define GPIO_PAR_LCDL_LD3_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD2_UNMASK (0xFFFFCFFF)
-#define GPIO_PAR_LCDL_LD2_LD2 (0x00003000)
-#define GPIO_PAR_LCDL_LD2_LD0 (0x00002000)
-#define GPIO_PAR_LCDL_LD2_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD1_UNMASK (0xFFFFF3FF)
-#define GPIO_PAR_LCDL_LD1_LD1 (0x00000C00)
-#define GPIO_PAR_LCDL_LD1_PWM3 (0x00000800)
-#define GPIO_PAR_LCDL_LD1_GPIO (0x00000000)
-
-#define GPIO_PAR_LCDL_LD0_UNMASK (0xFFFFFCFF)
-#define GPIO_PAR_LCDL_LD0_LD0 (0x00000300)
-#define GPIO_PAR_LCDL_LD0_PWM1 (0x00000200)
-#define GPIO_PAR_LCDL_LD0_GPIO (0x00000000)
-
-/* Bit definitions and macros for MSCR_FB */
-#define GPIO_MSCR_FB_DUPPER_UNMASK (0xCF)
-#define GPIO_MSCR_FB_DUPPER_25V_33V (0x30)
-#define GPIO_MSCR_FB_DUPPER_FULL_18V (0x20)
-#define GPIO_MSCR_FB_DUPPER_OD (0x10)
-#define GPIO_MSCR_FB_DUPPER_HALF_18V (0x00)
-
-#define GPIO_MSCR_FB_DLOWER_UNMASK (0xF3)
-#define GPIO_MSCR_FB_DLOWER_25V_33V (0x0C)
-#define GPIO_MSCR_FB_DLOWER_FULL_18V (0x08)
-#define GPIO_MSCR_FB_DLOWER_OD (0x04)
-#define GPIO_MSCR_FB_DLOWER_HALF_18V (0x00)
-
-#define GPIO_MSCR_FB_ADDRCTL_UNMASK (0xFC)
-#define GPIO_MSCR_FB_ADDRCTL_25V_33V (0x03)
-#define GPIO_MSCR_FB_ADDRCTL_FULL_18V (0x02)
-#define GPIO_MSCR_FB_ADDRCTL_OD (0x01)
-#define GPIO_MSCR_FB_ADDRCTL_HALF_18V (0x00)
-
-/* Bit definitions and macros for MSCR_SDRAM */
-#define GPIO_MSCR_SDRAM_SDCLKB_UNMASK (0xCF)
-#define GPIO_MSCR_SDRAM_SDCLKB_25V_33V (0x30)
-#define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V (0x20)
-#define GPIO_MSCR_SDRAM_SDCLKB_OD (0x10)
-#define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V (0x00)
-
-#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3)
-#define GPIO_MSCR_SDRAM_SDCLK_25V_33V (0x0C)
-#define GPIO_MSCR_SDRAM_SDCLK_FULL_18V (0x08)
-#define GPIO_MSCR_SDRAM_SDCLK_OPD (0x04)
-#define GPIO_MSCR_SDRAM_SDCLK_HALF_18V (0x00)
-
-#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC)
-#define GPIO_MSCR_SDRAM_SDCTL_25V_33V (0x03)
-#define GPIO_MSCR_SDRAM_SDCTL_FULL_18V (0x02)
-#define GPIO_MSCR_SDRAM_SDCTL_OPD (0x01)
-#define GPIO_MSCR_SDRAM_SDCTL_HALF_18V (0x00)
-
-/* Bit definitions and macros for Drive Strength Control */
-#define DSCR_LOAD_50PF (0x03)
-#define DSCR_LOAD_30PF (0x02)
-#define DSCR_LOAD_20PF (0x01)
-#define DSCR_LOAD_10PF (0x00)
-
-/*********************************************************************
-* SDRAM Controller (SDRAMC)
-*********************************************************************/
-
-/* Bit definitions and macros for SDMR */
-#define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */
-#define SDRAMC_SDMR_CMD (0x00010000) /* Command */
-#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */
-#define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */
-#define SDRAMC_SDMR_BK_LMR (0x00000000)
-#define SDRAMC_SDMR_BK_LEMR (0x40000000)
-
-/* Bit definitions and macros for SDCR */
-#define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */
-#define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */
-#define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */
-#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */
-#define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */
-#define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */
-#define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */
-#define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */
-#define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */
-#define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */
-#define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */
-#define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */
-#define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */
-#define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000)
-
-/* Bit definitions and macros for SDCFG1 */
-#define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */
-#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */
-#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */
-#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */
-#define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */
-#define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */
-#define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */
-
-/* Bit definitions and macros for SDCFG2 */
-#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */
-#define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */
-#define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */
-#define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */
-
-/* Bit definitions and macros for SDCS group */
-#define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */
-#define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */
-#define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
-#define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000)
-#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
-#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
-#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
-#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
-#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
-#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
-#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
-#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
-#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
-#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
-#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
-#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
-#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
-
-/*********************************************************************
-* Phase Locked Loop (PLL)
-*********************************************************************/
-
-/* Bit definitions and macros for PCR */
-#define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */
-#define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for bus/flexbus clock frequency */
-#define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for SDRAM clock frequency */
-#define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */
-#define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */
-#define PLL_PCR_PFDR_MASK (0x000F0000)
-#define PLL_PCR_OUTDIV5_MASK (0x000F0000)
-#define PLL_PCR_OUTDIV3_MASK (0x00000F00)
-#define PLL_PCR_OUTDIV2_MASK (0x000000F0)
-#define PLL_PCR_OUTDIV1_MASK (0x0000000F)
-
-/* Bit definitions and macros for PSR */
-#define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */
-#define PLL_PSR_LOCK (0x00000002) /* PLL lock status */
-#define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */
-#define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */
-
-/********************************************************************/
-
-#endif /* __MCF5227X__ */
+++ /dev/null
-if TARGET_M52277EVB
-
-config SYS_CPU
- default "mcf5227x"
-
-config SYS_BOARD
- default "m52277evb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "M52277EVB"
-
-endif
+++ /dev/null
-M52277EVB BOARD
-M: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
-S: Maintained
-F: board/freescale/m52277evb/
-F: include/configs/M52277EVB.h
-F: configs/M52277EVB_defconfig
-F: configs/M52277EVB_stmicro_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y = m52277evb.o
+++ /dev/null
-Freescale MCF52277EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Jan 8, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m52277evb/m52277evb.c Dram setup
-- board/freescale/m52277evb/Makefile Makefile
-- board/freescale/m52277evb/config.mk config make
-- board/freescale/m52277evb/u-boot.lds Linker description
-
-- arch/m68k/cpu/mcf5227x/cpu.c cpu specific code
-- arch/m68k/cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
-- arch/m68k/cpu/mcf5227x/interrupts.c cpu specific interrupt support
-- arch/m68k/cpu/mcf5227x/speed.c system, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5227x/Makefile Makefile
-- arch/m68k/cpu/mcf5227x/config.mk config make
-- arch/m68k/cpu/mcf5227x/start.S start up assembly code
-
-- board/freescale/m52277evb/README This readme file
-
-- drivers/serial/mcfuart.c ColdFire common UART driver
-- drivers/rtc/mcfrtc.c Realtime clock Driver
-
-- include/asm-m68k/bitops.h Bit operation function export
-- include/asm-m68k/byteorder.h Byte order functions
-- include/asm-m68k/crossbar.h CrossBar structure and definition
-- include/asm-m68k/dspi.h DSPI structure and definition
-- include/asm-m68k/edma.h eDMA structure and definition
-- include/asm-m68k/flexbus.h FlexBus structure and definition
-- include/asm-m68k/fsl_i2c.h I2C structure and definition
-- include/asm-m68k/global_data.h Global data structure
-- include/asm-m68k/immap.h ColdFire specific header file and driver macros
-- include/asm-m68k/immap_5227x.h mcf5227x specific header file
-- include/asm-m68k/io.h io functions
-- include/asm-m68k/lcd.h LCD structure and definition
-- include/asm-m68k/m5227x.h mcf5227x specific header file
-- include/asm-m68k/posix_types.h Posix
-- include/asm-m68k/processor.h header file
-- include/asm-m68k/ptrace.h Exception structure
-- include/asm-m68k/rtc.h Realtime clock header file
-- include/asm-m68k/ssi.h SSI structure and definition
-- include/asm-m68k/string.h String function export
-- include/asm-m68k/timer.h Timer structure and definition
-- include/asm-m68k/types.h Data types definition
-- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h U-Boot structure
-
-- include/configs/M52277EVB.h Board specific configuration file
-
-- arch/m68k/lib/board.c board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c Exception init code
-
-1 MCF52277 specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in this coldfire family
-
-1.2 Configuration settings for M52277EVB Development Board
-CONFIG_MCF5227x -- define for all MCF5227x CPUs
-CONFIG_M52277 -- define for all Freescale MCF52277 CPUs
-
-CONFIG_MCFUART -- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE -- define UART baudrate
-
-CONFIG_MCFRTC -- define to use common CF RTC driver
-CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
-CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
-RTC_DEBUG -- define to show RTC debug message
-CONFIG_CMD_DATE -- enable to use date feature in U-Boot
-
-CONFIG_MCFTMR -- define to use DMA timer
-
-CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED -- define for I2C speed
-CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
-CONFIG_SYS_IMMR -- define for MBAR offset
-
-CONFIG_SYS_MBAR -- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM
-
-CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
-
-CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot,
-update will be provided at later time
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
- Flash: 0x00000000-0x3FFFFFFF (1024MB)
- DDR: 0x40000000-0x7FFFFFFF (1024MB)
- SRAM: 0x80000000-0x8FFFFFFF (256MB)
- IP: 0xF0000000-0xFFFFFFFF (256MB)
-
-2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
- linux kernel, you can customize it based on your system requirements:
- Flash0: 0x00000000-0x00FFFFFF (16MB)
-
- DDR: 0x40000000-0x4FFFFFFF (64MB)
- SRAM: 0x80000000-0x80007FFF (32KB)
- IP: 0xFC000000-0xFC0FFFFF (64KB)
-
-3. COMPILATION
-==============
-3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
-uClinux version) from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
- export CROSS_COMPILE=cross-compile-prefix
- cd u-boot-1.x.x
- make distclean
- make M52277EVB_config
- make
-
-4. SCREEN DUMP
-==============
-4.1 M52277EVB Development board
- (NOTE: May not show exactly the same)
-
-U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
-
-CPU: Freescale MCF52277 (Mask:6c Version:0)
- CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
- INP CLK 16 Mhz VCO CLK 480 Mhz
-Board: Freescale 52277 EVB
-I2C: ready
-DRAM: 64 MB
-FLASH: 16 MB
-In: serial
-Out: serial
-Err: serial
--> print
-baudrate=115200
-hostname=M52277EVB
-inpclk=16000000
-loadaddr=(0x40000000 + 0x10000)
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
-u-boot=u-boot.bin
-stdin=serial
-stdout=serial
-stderr=serial
-mem=65024k
-
-Environment size: 280/32764 bytes
--> bdinfo
-memstart = 0x40000000
-memsize = 0x04000000
-flashstart = 0x00000000
-flashsize = 0x01000000
-flashoffset = 0x00000000
-sramstart = 0x80000000
-sramsize = 0x00008000
-mbar = 0xFC000000
-busfreq = 80 MHz
-flbfreq = 80 Mhz
-inpfreq = 16 Mhz
-vcofreq = 480 Mhz
-
-baudrate = 115200 bps
-->
--> help
-? - alias for 'help'
-base - print or set address offset
-bdinfo - print Board Info structure
-boot - boot default, i.e., run 'bootcmd'
-bootd - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm - boot application image from memory
-bootp - boot image via network using BootP/TFTP protocol
-bootvx - Boot vxWorks from an ELF image
-cmp - memory compare
-coninfo - print console devices and information
-cp - memory copy
-crc32 - checksum calculation
-date - get/set/reset date & time
-dcache - enable or disable data cache
-echo - echo args to console
-erase - erase FLASH memory
-flinfo - print FLASH memory information
-go - start application at address 'addr'
-help - print online help
-i2c - I2C sub-system
-icache - enable or disable instruction cache
-iminfo - print header information for application image
-imls - list all images found in flash
-itest - return true/false on integer compare
-loadb - load binary file over serial line (kermit mode)
-loads - load S-Record file over serial line
-loady - load binary file over serial line (ymodem mode)
-loop - infinite loop on address range
-ls - list files in a directory (default /)
-md - memory display
-mm - memory modify (auto-incrementing)
-mtest - simple RAM test
-mw - memory write (fill)
-nm - memory modify (constant address)
-ping - send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-reset - Perform RESET of the CPU
-run - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv - set environment variables
-sleep - delay execution for some time
-source - run script from memory
-version - print monitor version
-->
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- puts("Board: ");
- puts("Freescale M52277 EVB\n");
- return 0;
-};
-
-int dram_init(void)
-{
- u32 dramsize;
-
-#ifdef CONFIG_CF_SBF
- /*
- * Serial Boot: The dram is already initialized in start.S
- * only require to return DRAM size
- */
- dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-#else
- sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
- gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
- u32 i;
-
- dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-
- for (i = 0x13; i < 0x20; i++) {
- if (dramsize == (1 << i))
- break;
- }
- i--;
-
- out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
-
- out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
-
- out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
- out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
-
- /* Issue PALL */
- out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
- __asm__("nop");
-
- /* Issue LEMR */
- out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
- __asm__("nop");
- out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD);
- __asm__("nop");
-
- udelay(1000);
-
- /* Issue PALL */
- out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
- __asm__("nop");
-
- /* Perform two refresh cycles */
- out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
- __asm__("nop");
- out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
- __asm__("nop");
-
- out_be32(&sdram->sdcr,
- (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
-
- udelay(100);
-#endif
- gd->ram_size = dramsize;
-
- return 0;
-};
-
-int testdram(void)
-{
- /* TODO: XXX XXX XXX */
- printf("DRAM test not implemented!\n");
-
- return (0);
-}
+++ /dev/null
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_DEFAULT_DEVICE_TREE="M52277EVB"
-CONFIG_TARGET_M52277EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
+++ /dev/null
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x43E00000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x30000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M52277EVB_stmicro"
-CONFIG_TARGET_M52277EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=2
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF52277 EVB board.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M52277EVB_H
-#define _M52277EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_HOSTNAME "M52277EVB"
-#define CONFIG_SYS_UBOOT_END 0x3FFFF
-#define CONFIG_SYS_LOAD_ADDR2 0x40010007
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
- "loadaddr=0x40010000\0" \
- "uboot=u-boot.bin\0" \
- "load=loadb ${loadaddr} ${baudrate};" \
- "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \
- "upd=run load; run prog\0" \
- "prog=sf probe 0:2 10000 1;" \
- "sf erase 0 30000;" \
- "sf write ${loadaddr} 0 30000;" \
- "save\0" \
- ""
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
- "loadaddr=0x40010000\0" \
- "uboot=u-boot.bin\0" \
- "load=loadb ${loadaddr} ${baudrate}\0" \
- "upd=run load; run prog\0" \
- "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \
- " " __stringify(CONFIG_SYS_UBOOT_END) ";" \
- "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \
- __stringify(CONFIG_SYS_UBOOT_END) ";" \
- "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \
- " ${filesize}; save\0" \
- "updsbf=run loadsbf; run progsbf\0" \
- "loadsbf=loadb ${loadaddr} ${baudrate};" \
- "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \
- "progsbf=sf probe 0:2 10000 1;" \
- "sf erase 0 30000;" \
- "sf write ${loadaddr} 0 30000;" \
- ""
-#endif
-
-/* LCD */
-#ifdef CONFIG_CMD_BMP
-#define CONFIG_LCD_LOGO
-#define CONFIG_SHARP_LQ035Q7DH06
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000
-#define CONFIG_SYS_USB_EHCI_CPU_INIT
-#endif
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 80000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SYS_SBFHDR_SIZE 0x7
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_SYS_INPUT_CLKSRC 16000000
-
-#define CONFIG_PRAM 2048 /* 2048 KB */
-
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR 0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL 0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32)
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1 0x43711630
-#define CONFIG_SYS_SDRAM_CFG2 0x56670000
-#define CONFIG_SYS_SDRAM_CTRL 0xE1092000
-#define CONFIG_SYS_SDRAM_EMOD 0x81810000
-#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x00
-
-#ifdef CONFIG_CF_SBF
-# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20)
-
-/*
- * Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_STMICRO_BOOT
-# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
-#endif
-
-#ifdef CONFIG_SYS_FLASH_CFI
-# define CONFIG_FLASH_SPANSION_S29WS_N 1
-# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
-# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-# define CONFIG_SYS_FLASH_CHECKSUM
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE }
-#endif
-
-#define LDS_BOARD_TEXT \
- arch/m68k/cpu/mcf5227x/built-in.o (.text*) \
- arch/m68k/lib/built-in.o (.text*)
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-# define CONFIG_JFFS2_DEV "nor0"
-# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x40000)
-# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x40000)
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
-#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
- CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
- CF_CACR_DISD | CF_CACR_INVI | \
- CF_CACR_CEIB | CF_CACR_DCM | \
- CF_CACR_EUSP)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash
- * CS1 - Available
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-
-#ifdef CONFIG_CF_SBF
-#define CONFIG_SYS_CS0_BASE 0x04000000
-#define CONFIG_SYS_CS0_MASK 0x00FF0001
-#define CONFIG_SYS_CS0_CTRL 0x00001FA0
-#else
-#define CONFIG_SYS_CS0_BASE 0x00000000
-#define CONFIG_SYS_CS0_MASK 0x00FF0001
-#define CONFIG_SYS_CS0_CTRL 0x00001FA0
-#endif
-
-#endif /* _M52277EVB_H */
projects / platform / kernel / u-boot.git / commitdiff