#!/bin/sh
-test_description='git-p4 p4 branching tests'
+test_description='git p4 tests for p4 branches'
. ./lib-git-p4.sh
test_expect_success 'import main, no branch detection' '
test_when_finished cleanup_git &&
- "$GITP4" clone --dest="$git" //depot/main@all &&
+ git p4 clone --dest="$git" //depot/main@all &&
(
cd "$git" &&
git log --oneline --graph --decorate --all &&
test_expect_success 'import branch1, no branch detection' '
test_when_finished cleanup_git &&
- "$GITP4" clone --dest="$git" //depot/branch1@all &&
+ git p4 clone --dest="$git" //depot/branch1@all &&
(
cd "$git" &&
git log --oneline --graph --decorate --all &&
test_expect_success 'import branch2, no branch detection' '
test_when_finished cleanup_git &&
- "$GITP4" clone --dest="$git" //depot/branch2@all &&
+ git p4 clone --dest="$git" //depot/branch2@all &&
(
cd "$git" &&
git log --oneline --graph --decorate --all &&
test_expect_success 'import depot, no branch detection' '
test_when_finished cleanup_git &&
- "$GITP4" clone --dest="$git" //depot@all &&
+ git p4 clone --dest="$git" //depot@all &&
(
cd "$git" &&
git log --oneline --graph --decorate --all &&
test_expect_success 'import depot, branch detection' '
test_when_finished cleanup_git &&
- "$GITP4" clone --dest="$git" --detect-branches //depot@all &&
+ git p4 clone --dest="$git" --detect-branches //depot@all &&
(
cd "$git" &&
(
cd "$git" &&
git config git-p4.branchList main:branch1 &&
- "$GITP4" clone --dest=. --detect-branches //depot@all &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
git log --oneline --graph --decorate --all &&
# Configure branches through git-config and clone them.
# All files are tested to make sure branches were cloned correctly.
# Finally, make an update to branch1 on P4 side to check if it is imported
-# correctly by git-p4.
-test_expect_success 'git-p4 clone simple branches' '
+# correctly by git p4.
+test_expect_success 'git p4 clone simple branches' '
test_when_finished cleanup_git &&
test_create_repo "$git" &&
(
cd "$git" &&
git config git-p4.branchList branch1:branch2 &&
git config --add git-p4.branchList branch1:branch3 &&
- "$GITP4" clone --dest=. --detect-branches //depot@all &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
git log --all --graph --decorate --stat &&
git reset --hard p4/depot/branch1 &&
test -f file1 &&
cd branch1 &&
p4 edit file2 &&
echo file2_ >>file2 &&
- p4 submit -d "update file2 in branch3" &&
+ p4 submit -d "update file2 in branch1" &&
cd "$git" &&
git reset --hard p4/depot/branch1 &&
- "$GITP4" rebase &&
+ git p4 rebase &&
grep file2_ file2
)
'
# Create a complex branch structure in P4 depot to check if they are correctly
-# cloned. The branches are created from older changelists to check if git-p4 is
+# cloned. The branches are created from older changelists to check if git p4 is
# able to correctly detect them.
# The final expected structure is:
# `branch1
# `- file1
# `- file2
# `- file3
-test_expect_success 'git-p4 add complex branches' '
- test_when_finished cleanup_git &&
- test_create_repo "$git" &&
+test_expect_success 'git p4 add complex branches' '
(
cd "$cli" &&
changelist=$(p4 changes -m1 //depot/... | cut -d" " -f2) &&
)
'
-# Configure branches through git-config and clone them. git-p4 will only be able
+# Configure branches through git-config and clone them. git p4 will only be able
# to clone the original structure if it is able to detect the origin changelist
# of each branch.
-test_expect_success 'git-p4 clone complex branches' '
+test_expect_success 'git p4 clone complex branches' '
test_when_finished cleanup_git &&
test_create_repo "$git" &&
(
git config --add git-p4.branchList branch1:branch3 &&
git config --add git-p4.branchList branch1:branch4 &&
git config --add git-p4.branchList branch1:branch5 &&
- "$GITP4" clone --dest=. --detect-branches //depot@all &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
git log --all --graph --decorate --stat &&
git reset --hard p4/depot/branch1 &&
test_path_is_file file1 &&
)
'
+# Move branch3/file3 to branch4/file3 in a single changelist
+test_expect_success 'git p4 submit to two branches in a single changelist' '
+ (
+ cd "$cli" &&
+ p4 integrate //depot/branch3/file3 //depot/branch4/file3 &&
+ p4 delete //depot/branch3/file3 &&
+ p4 submit -d "Move branch3/file3 to branch4/file3"
+ )
+'
+
+# Confirm that changes to two branches done in a single changelist
+# are correctly imported by git p4
+test_expect_success 'git p4 sync changes to two branches in the same changelist' '
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git config git-p4.branchList branch1:branch2 &&
+ git config --add git-p4.branchList branch1:branch3 &&
+ git config --add git-p4.branchList branch1:branch4 &&
+ git config --add git-p4.branchList branch1:branch5 &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
+ git log --all --graph --decorate --stat &&
+ git reset --hard p4/depot/branch1 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch2 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch3 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch4 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch5 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ test_path_is_missing .git/git-p4-tmp
+ )
+'
+
+# Create a branch by integrating a single file
+test_expect_success 'git p4 file subset branch' '
+ (
+ cd "$cli" &&
+ p4 integrate //depot/branch1/file1 //depot/branch6/file1 &&
+ p4 submit -d "Integrate file1 alone from branch1 to branch6"
+ )
+'
+
+# Check if git p4 creates a new branch containing a single file,
+# instead of keeping the old files from the original branch
+test_expect_failure 'git p4 clone file subset branch' '
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git config git-p4.branchList branch1:branch2 &&
+ git config --add git-p4.branchList branch1:branch3 &&
+ git config --add git-p4.branchList branch1:branch4 &&
+ git config --add git-p4.branchList branch1:branch5 &&
+ git config --add git-p4.branchList branch1:branch6 &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
+ git log --all --graph --decorate --stat &&
+ git reset --hard p4/depot/branch1 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch2 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch3 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch4 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch5 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch6 &&
+ test_path_is_file file1 &&
+ test_path_is_missing file2 &&
+ test_path_is_missing file3
+ )
+'
+
+# From a report in http://stackoverflow.com/questions/11893688
+# where --use-client-spec caused branch prefixes not to be removed;
+# every file in git appeared into a subdirectory of the branch name.
+test_expect_success 'use-client-spec detect-branches setup' '
+ rm -rf "$cli" &&
+ mkdir "$cli" &&
+ (
+ cd "$cli" &&
+ client_view "//depot/usecs/... //client/..." &&
+ mkdir b1 &&
+ echo b1/b1-file1 >b1/b1-file1 &&
+ p4 add b1/b1-file1 &&
+ p4 submit -d "b1/b1-file1" &&
+
+ p4 integrate //depot/usecs/b1/... //depot/usecs/b2/... &&
+ p4 submit -d "b1 -> b2" &&
+ p4 branch -i <<-EOF &&
+ Branch: b2
+ View: //depot/usecs/b1/... //depot/usecs/b2/...
+ EOF
+
+ echo b2/b2-file2 >b2/b2-file2 &&
+ p4 add b2/b2-file2 &&
+ p4 submit -d "b2/b2-file2"
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches files in top-level' '
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git p4 sync --detect-branches --use-client-spec //depot/usecs@all &&
+ git checkout -b master p4/usecs/b1 &&
+ test_path_is_file b1-file1 &&
+ test_path_is_missing b2-file2 &&
+ test_path_is_missing b1 &&
+ test_path_is_missing b2 &&
+
+ git checkout -b b2 p4/usecs/b2 &&
+ test_path_is_file b1-file1 &&
+ test_path_is_file b2-file2 &&
+ test_path_is_missing b1 &&
+ test_path_is_missing b2
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches skips branches setup' '
+ (
+ cd "$cli" &&
+
+ p4 integrate //depot/usecs/b1/... //depot/usecs/b3/... &&
+ p4 submit -d "b1 -> b3" &&
+ p4 branch -i <<-EOF &&
+ Branch: b3
+ View: //depot/usecs/b1/... //depot/usecs/b3/...
+ EOF
+
+ echo b3/b3-file3_1 >b3/b3-file3_1 &&
+ echo b3/b3-file3_2 >b3/b3-file3_2 &&
+ p4 add b3/b3-file3_1 &&
+ p4 add b3/b3-file3_2 &&
+ p4 submit -d "b3/b3-file3_1 b3/b3-file3_2"
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches skips branches' '
+ client_view "//depot/usecs/... //client/..." \
+ "-//depot/usecs/b3/... //client/b3/..." &&
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git p4 sync --detect-branches --use-client-spec //depot/usecs@all &&
+ test_must_fail git rev-parse refs/remotes/p4/usecs/b3
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches skips files in branches' '
+ client_view "//depot/usecs/... //client/..." \
+ "-//depot/usecs/b3/b3-file3_1 //client/b3/b3-file3_1" &&
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git p4 sync --detect-branches --use-client-spec //depot/usecs@all &&
+ git checkout -b master p4/usecs/b3 &&
+ test_path_is_file b1-file1 &&
+ test_path_is_file b3-file3_2 &&
+ test_path_is_missing b3-file3_1
+ )
+'
+
+test_expect_success 'restart p4d' '
+ kill_p4d &&
+ start_p4d
+'
+
+#
+# 1: //depot/branch1/base/file1
+# //depot/branch1/base/file2
+# //depot/branch1/base/dir/sub_file1
+# 2: integrate //depot/branch1/base/... -> //depot/branch2/base/...
+# 3: //depot/branch1/base/file3
+# 4: //depot/branch1/base/file2 (edit)
+# 5: integrate //depot/branch1/base/... -> //depot/branch3/base/...
+#
+# Note: the client view removes the "base" folder from the workspace
+# and moves sub_file1 one level up.
+test_expect_success 'add simple p4 branches with common base folder on each branch' '
+ (
+ cd "$cli" &&
+ client_view "//depot/branch1/base/... //client/branch1/..." \
+ "//depot/branch1/base/dir/sub_file1 //client/branch1/sub_file1" \
+ "//depot/branch2/base/... //client/branch2/..." \
+ "//depot/branch3/base/... //client/branch3/..." &&
+ mkdir -p branch1 &&
+ cd branch1 &&
+ echo file1 >file1 &&
+ echo file2 >file2 &&
+ mkdir dir &&
+ echo sub_file1 >sub_file1 &&
+ p4 add file1 file2 sub_file1 &&
+ p4 submit -d "Create branch1" &&
+ p4 integrate //depot/branch1/base/... //depot/branch2/base/... &&
+ p4 submit -d "Integrate branch2 from branch1" &&
+ echo file3 >file3 &&
+ p4 add file3 &&
+ p4 submit -d "add file3 in branch1" &&
+ p4 open file2 &&
+ echo update >>file2 &&
+ p4 submit -d "update file2 in branch1" &&
+ p4 integrate //depot/branch1/base/... //depot/branch3/base/... &&
+ p4 submit -d "Integrate branch3 from branch1"
+ )
+'
+
+# Configure branches through git-config and clone them.
+# All files are tested to make sure branches were cloned correctly.
+# Finally, make an update to branch1 on P4 side to check if it is imported
+# correctly by git p4.
+# git p4 is expected to use the client view to also not include the common
+# "base" folder in the imported directory structure.
+test_expect_success 'git p4 clone simple branches with base folder on server side' '
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git config git-p4.branchList branch1:branch2 &&
+ git config --add git-p4.branchList branch1:branch3 &&
+ git p4 clone --dest=. --use-client-spec --detect-branches //depot@all &&
+ git log --all --graph --decorate --stat &&
+ git reset --hard p4/depot/branch1 &&
+ test -f file1 &&
+ test -f file2 &&
+ test -f file3 &&
+ test -f sub_file1 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch2 &&
+ test -f file1 &&
+ test -f file2 &&
+ test ! -f file3 &&
+ test -f sub_file1 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch3 &&
+ test -f file1 &&
+ test -f file2 &&
+ test -f file3 &&
+ test -f sub_file1 &&
+ grep update file2 &&
+ cd "$cli" &&
+ cd branch1 &&
+ p4 edit file2 &&
+ echo file2_ >>file2 &&
+ p4 submit -d "update file2 in branch1" &&
+ cd "$git" &&
+ git reset --hard p4/depot/branch1 &&
+ git p4 rebase &&
+ grep file2_ file2
+ )
+'
+
+# Now update a file in one of the branches in git and submit to P4
+test_expect_success 'Update a file in git side and submit to P4 using client view' '
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git reset --hard p4/depot/branch1 &&
+ echo "client spec" >> file1 &&
+ git add -u . &&
+ git commit -m "update file1 in branch1" &&
+ git config git-p4.skipSubmitEdit true &&
+ git p4 submit --verbose &&
+ cd "$cli" &&
+ p4 sync ... &&
+ cd branch1 &&
+ grep "client spec" file1
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
projects / platform / upstream / git.git / blobdiff