test_line_count = 6 actual
'
+cat > expect <<EOF
+error: nothing to do
+EOF
+
+test_expect_success 'rebase -i with empty HEAD' '
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 exec_true" git rebase -i HEAD^ >actual 2>&1 &&
+ test_i18ncmp expect actual
+'
+
test_expect_success 'rebase -i with the exec command' '
git checkout master &&
(
rm -fr subdir
'
+test_expect_success 'rebase -i with exec allows git commands in subdirs' '
+ test_when_finished "rm -rf subdir" &&
+ test_when_finished "git rebase --abort ||:" &&
+ git checkout master &&
+ mkdir subdir && (cd subdir &&
+ set_fake_editor &&
+ FAKE_LINES="1 x_cd_subdir_&&_git_rev-parse_--is-inside-work-tree" \
+ git rebase -i HEAD^
+ )
+'
+
+test_expect_success 'rebase -i sets work tree properly' '
+ test_when_finished "rm -rf subdir" &&
+ test_when_finished "test_might_fail git rebase --abort" &&
+ mkdir subdir &&
+ git rebase -x "(cd subdir && git rev-parse --show-toplevel)" HEAD^ \
+ >actual &&
+ ! grep "/subdir$" actual
+'
+
test_expect_success 'rebase -i with the exec command checks tree cleanness' '
git checkout master &&
set_fake_editor &&
git rebase --continue
'
+test_expect_success 'rebase -x with empty command fails' '
+ test_when_finished "git rebase --abort ||:" &&
+ test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=true \
+ git rebase -x "" @ 2>actual &&
+ test_write_lines "error: empty exec command" >expected &&
+ test_i18ncmp expected actual &&
+ test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=true \
+ git rebase -x " " @ 2>actual &&
+ test_i18ncmp expected actual
+'
+
+LF='
+'
+test_expect_success 'rebase -x with newline in command fails' '
+ test_when_finished "git rebase --abort ||:" &&
+ test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=true \
+ git rebase -x "a${LF}b" @ 2>actual &&
+ test_write_lines "error: exec commands cannot contain newlines" \
+ >expected &&
+ test_i18ncmp expected actual
+'
+
test_expect_success 'rebase -i with exec of inexistent command' '
git checkout master &&
test_when_finished "git rebase --abort" &&
! grep "Maybe git-rebase is broken" actual
'
+test_expect_success 'implicit interactive rebase does not invoke sequence editor' '
+ test_when_finished "git rebase --abort ||:" &&
+ GIT_SEQUENCE_EDITOR="echo bad >" git rebase -x"echo one" @^
+'
+
test_expect_success 'no changes are a nop' '
git checkout branch2 &&
set_fake_editor &&
test $(git rev-parse branch1@{1}) = $(git rev-parse original-branch1)
'
+test_expect_success 'reflog for the branch shows correct finish message' '
+ printf "rebase -i (finish): refs/heads/branch1 onto %s\n" \
+ "$(git rev-parse branch2)" >expected &&
+ git log -g --pretty=%gs -1 refs/heads/branch1 >actual &&
+ test_cmp expected actual
+'
+
test_expect_success 'exchange two commits' '
set_fake_editor &&
FAKE_LINES="2 1" git rebase -i HEAD~2 &&
test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo)
'
+test_expect_success 'show conflicted patch' '
+ GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr &&
+ grep "show.*REBASE_HEAD" stderr &&
+ # the original stopped-sha1 is abbreviated
+ stopped_sha1="$(git rev-parse $(cat ".git/rebase-merge/stopped-sha"))" &&
+ test "$(git rev-parse REBASE_HEAD)" = "$stopped_sha1"
+'
+
test_expect_success 'abort' '
git rebase --abort &&
test $(git rev-parse new-branch1) = $(git rev-parse HEAD) &&
'
test_expect_success 'retain authorship w/ conflicts' '
+ oGIT_AUTHOR_NAME=$GIT_AUTHOR_NAME &&
+ test_when_finished "GIT_AUTHOR_NAME=\$oGIT_AUTHOR_NAME" &&
+
git reset --hard twerp &&
test_commit a conflict a conflict-a &&
git reset --hard twerp &&
- GIT_AUTHOR_NAME=AttributeMe \
+
+ GIT_AUTHOR_NAME=AttributeMe &&
+ export GIT_AUTHOR_NAME &&
test_commit b conflict b conflict-b &&
+ GIT_AUTHOR_NAME=$oGIT_AUTHOR_NAME &&
+
set_fake_editor &&
test_must_fail git rebase -i conflict-a &&
echo resolved >conflict &&
git show HEAD | grep "^Author: Twerp Snog"
'
-test_expect_success '-p handles "no changes" gracefully' '
+test_expect_success REBASE_P '-p handles "no changes" gracefully' '
HEAD=$(git rev-parse HEAD) &&
set_fake_editor &&
git rebase -i -p HEAD^ &&
test $HEAD = $(git rev-parse HEAD)
'
-test_expect_failure 'exchange two commits with -p' '
+test_expect_failure REBASE_P 'exchange two commits with -p' '
git checkout H &&
set_fake_editor &&
FAKE_LINES="2 1" git rebase -i -p HEAD~2 &&
test G = $(git cat-file commit HEAD | sed -ne \$p)
'
-test_expect_success 'preserve merges with -p' '
+test_expect_success REBASE_P 'preserve merges with -p' '
git checkout -b to-be-preserved master^ &&
: > unrelated-file &&
git add unrelated-file &&
test $(git show HEAD:unrelated-file) = 1
'
-test_expect_success 'edit ancestor with -p' '
+test_expect_success REBASE_P 'edit ancestor with -p' '
set_fake_editor &&
FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 &&
echo 2 > unrelated-file &&
'
test_expect_success '--continue tries to commit' '
+ git reset --hard D &&
test_tick &&
set_fake_editor &&
test_must_fail git rebase -i --onto new-branch1 HEAD^ &&
grep "^ file1 | 2 +-$" output
'
-test_expect_success 'multi-squash only fires up editor once' '
+test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' '
base=$(git rev-parse HEAD~4) &&
set_fake_editor &&
FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \
test 1 = $(git show | grep ONCE | wc -l)
'
-test_expect_success 'multi-fixup does not fire up editor' '
+test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' '
git checkout -b multi-fixup E &&
base=$(git rev-parse HEAD~4) &&
set_fake_editor &&
git rebase -i $base &&
test $base = $(git rev-parse HEAD^) &&
test 0 = $(git show | grep NEVER | wc -l) &&
- git checkout to-be-rebased &&
+ git checkout @{-1} &&
git branch -D multi-fixup
'
git rebase --continue &&
test $base = $(git rev-parse HEAD^) &&
test 1 = $(git show | grep ONCE | wc -l) &&
- git checkout to-be-rebased &&
+ git checkout @{-1} &&
git branch -D conflict-fixup
'
git rebase --continue &&
test $base = $(git rev-parse HEAD^) &&
test 2 = $(git show | grep TWICE | wc -l) &&
- git checkout to-be-rebased &&
+ git checkout @{-1} &&
git branch -D conflict-squash
'
ONCE
EOF
-test_expect_success 'squash and fixup generate correct log messages' '
+test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' '
git checkout -b squash-fixup E &&
base=$(git rev-parse HEAD~4) &&
set_fake_editor &&
git rebase -i $base &&
git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup &&
test_cmp expect-squash-fixup actual-squash-fixup &&
- git checkout to-be-rebased &&
+ git cat-file commit HEAD@{2} |
+ grep "^# This is a combination of 3 commits\." &&
+ git cat-file commit HEAD@{3} |
+ grep "^# This is a combination of 2 commits\." &&
+ git checkout @{-1} &&
git branch -D squash-fixup
'
-test_expect_success 'squash ignores comments' '
+test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' '
git checkout -b skip-comments E &&
base=$(git rev-parse HEAD~4) &&
set_fake_editor &&
git rebase -i $base &&
test $base = $(git rev-parse HEAD^) &&
test 1 = $(git show | grep ONCE | wc -l) &&
- git checkout to-be-rebased &&
+ git checkout @{-1} &&
git branch -D skip-comments
'
-test_expect_success 'squash ignores blank lines' '
+test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' '
git checkout -b skip-blank-lines E &&
base=$(git rev-parse HEAD~4) &&
set_fake_editor &&
git rebase -i $base &&
test $base = $(git rev-parse HEAD^) &&
test 1 = $(git show | grep ONCE | wc -l) &&
- git checkout to-be-rebased &&
+ git checkout @{-1} &&
git branch -D skip-blank-lines
'
git checkout -b squash-works no-conflict-branch &&
one=$(git rev-parse HEAD~3) &&
set_fake_editor &&
- FAKE_LINES="1 squash 3 2" EXPECT_HEADER_COUNT=2 \
+ FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 \
git rebase -i HEAD~3 &&
test $one = $(git rev-parse HEAD~2)
'
one=$(git rev-parse HEAD~3) &&
set_fake_editor &&
test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 &&
- (echo one; echo two; echo four) > conflict &&
+ test_write_lines one two four > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
echo resolved > conflict &&
one=$(git rev-parse HEAD~3) &&
set_fake_editor &&
test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 &&
- (echo one; echo four) > conflict &&
+ test_write_lines one four > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
- (echo one; echo two; echo four) > conflict &&
+ test_write_lines one two four > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
echo resolved > conflict &&
echo "edited again" > file7 &&
git add file7 &&
test_must_fail git rebase --continue 2>error &&
- test_i18ngrep "You have staged changes in your working tree." error
+ test_i18ngrep "you have staged changes in your working tree" error
'
test_expect_success 'rebase a detached HEAD' '
) &&
set_fake_editor &&
- FAKE_LINES="1 squash 2" git rebase -i to-be-rebased &&
+ FAKE_LINES="1 squash 2" git rebase -i @{-1} &&
test "$(git show -s --pretty=format:%an)" = "Squashed Away"
'
test_expect_success 'avoid unnecessary reset' '
git checkout master &&
git reset --hard &&
- test-chmtime =123456789 file3 &&
+ test-tool chmtime =123456789 file3 &&
git update-index --refresh &&
HEAD=$(git rev-parse HEAD) &&
set_fake_editor &&
git rebase -i HEAD~4 &&
test $HEAD = $(git rev-parse HEAD) &&
- MTIME=$(test-chmtime -v +0 file3 | sed 's/[^0-9].*$//') &&
+ MTIME=$(test-tool chmtime --get file3) &&
test 123456789 = $MTIME
'
git show HEAD^ | grep "D changed" &&
FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" git rebase -i A &&
git show HEAD~3 | grep "B changed" &&
- FAKE_LINES="1 reword 2 3 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A &&
+ FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A &&
git show HEAD~2 | grep "C changed"
'
git reset --hard n3 &&
git notes add -m"an earlier note" n2 &&
set_fake_editor &&
- GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 fixup 2" git rebase -i n1 &&
+ GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" git rebase -i n1 &&
git notes show > output &&
test_cmp expect output
'
git tag original-no-ff-branch &&
set_fake_editor &&
git rebase -i --no-ff A &&
- touch empty &&
for p in 0 1 2
do
test ! $(git rev-parse HEAD~$p) = $(git rev-parse original-no-ff-branch~$p) &&
git diff HEAD~$p original-no-ff-branch~$p > out &&
- test_cmp empty out
+ test_must_be_empty out
done &&
test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) &&
git diff HEAD~3 original-no-ff-branch~3 > out &&
- test_cmp empty out
+ test_must_be_empty out
'
test_expect_success 'set up commits with funny messages' '
test_cmp expected actual
'
-test_expect_success 'rebase -ix with --autosquash' '
+test_expect_success C_LOCALE_OUTPUT 'rebase -ix with --autosquash' '
git reset --hard execute &&
git checkout -b autosquash &&
echo second >second.txt &&
test_expect_success 'rebase -i --exec without <CMD>' '
git reset --hard execute &&
set_fake_editor &&
- test_must_fail git rebase -i --exec 2>tmp &&
- sed -e "1d" tmp >actual &&
- test_must_fail git rebase -h >expected &&
- test_cmp expected actual &&
+ test_must_fail git rebase -i --exec 2>actual &&
+ test_i18ngrep "requires a value" actual &&
git checkout master
'
test 0 = $(git cat-file commit HEAD | grep -c ^parent\ )
'
-test_expect_success 'rebase --edit-todo does not works on non-interactive rebase' '
+test_expect_success 'rebase -i --root reword root commit' '
+ test_when_finished "test_might_fail git rebase --abort" &&
+ git checkout -b reword-root-branch master &&
+ set_fake_editor &&
+ FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \
+ git rebase -i --root &&
+ git show HEAD^ | grep "A changed" &&
+ test -z "$(git show -s --format=%p HEAD^)"
+'
+
+test_expect_success 'rebase -i --root when root has untracked file confilct' '
+ test_when_finished "reset_rebase" &&
+ git checkout -b failing-root-pick A &&
+ echo x >file2 &&
+ git rm file1 &&
+ git commit -m "remove file 1 add file 2" &&
+ echo z >file1 &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="1 2" git rebase -i --root &&
+ rm file1 &&
+ git rebase --continue &&
+ test "$(git log -1 --format=%B)" = "remove file 1 add file 2" &&
+ test "$(git rev-list --count HEAD)" = 2
+'
+
+test_expect_success 'rebase -i --root reword root when root has untracked file conflict' '
+ test_when_finished "reset_rebase" &&
+ echo z>file1 &&
+ set_fake_editor &&
+ test_must_fail env FAKE_LINES="reword 1 2" \
+ FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root &&
+ rm file1 &&
+ FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue &&
+ test "$(git log -1 --format=%B HEAD^)" = "Reworded A" &&
+ test "$(git rev-list --count HEAD)" = 2
+'
+
+test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' '
+ git checkout reword-root-branch &&
git reset --hard &&
git checkout conflict-branch &&
set_fake_editor &&
test_might_fail git branch -D $1 &&
test_might_fail git rebase --abort
" &&
- git checkout -b $1 master
+ git checkout -b $1 ${2:-master}
}
test_expect_success 'drop' '
rebase_setup_and_clean drop-test &&
set_fake_editor &&
- FAKE_LINES="1 drop 2 3 drop 4 5" git rebase -i --root &&
+ FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root &&
test E = $(git cat-file commit HEAD | sed -ne \$p) &&
test C = $(git cat-file commit HEAD^ | sed -ne \$p) &&
test A = $(git cat-file commit HEAD^^ | sed -ne \$p)
'
-cat >expect <<EOF
-Successfully rebased and updated refs/heads/missing-commit.
-EOF
-
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' '
test_config rebase.missingCommitsCheck ignore &&
rebase_setup_and_clean missing-commit &&
FAKE_LINES="1 2 3 4" \
git rebase -i --root 2>actual &&
test D = $(git cat-file commit HEAD | sed -ne \$p) &&
- test_i18ncmp expect actual
+ test_i18ngrep \
+ "Successfully rebased and updated refs/heads/missing-commit" \
+ actual
'
cat >expect <<EOF
Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
The possible behaviours are: ignore, warn, error.
+Rebasing (1/4)
+Rebasing (2/4)
+Rebasing (3/4)
+Rebasing (4/4)
Successfully rebased and updated refs/heads/missing-commit.
EOF
+cr_to_nl () {
+ tr '\015' '\012'
+}
+
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' '
test_config rebase.missingCommitsCheck warn &&
rebase_setup_and_clean missing-commit &&
set_fake_editor &&
FAKE_LINES="1 2 3 4" \
- git rebase -i --root 2>actual &&
+ git rebase -i --root 2>actual.2 &&
+ cr_to_nl <actual.2 >actual &&
test_i18ncmp expect actual &&
test D = $(git cat-file commit HEAD | sed -ne \$p)
'
test B = $(git cat-file commit HEAD^ | sed -ne \$p)
'
-cat >expect <<EOF
-Warning: the command isn't recognized in the following line:
- - badcmd $(git rev-list --oneline -1 master~1)
-
-You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
-Or you can abort the rebase with 'git rebase --abort'.
-EOF
+test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and exec' '
+ rebase_setup_and_clean abbrevcmd &&
+ test_commit "first" file1.txt "first line" first &&
+ test_commit "second" file1.txt "another line" second &&
+ test_commit "fixup! first" file2.txt "first line again" first_fixup &&
+ test_commit "squash! second" file1.txt "another line here" second_squash &&
+ cat >expected <<-EOF &&
+ p $(git rev-list --abbrev-commit -1 first) first
+ f $(git rev-list --abbrev-commit -1 first_fixup) fixup! first
+ x git show HEAD
+ p $(git rev-list --abbrev-commit -1 second) second
+ s $(git rev-list --abbrev-commit -1 second_squash) squash! second
+ x git show HEAD
+ EOF
+ git checkout abbrevcmd &&
+ set_cat_todo_editor &&
+ test_config rebase.abbreviateCommands true &&
+ test_must_fail git rebase -i --exec "git show HEAD" \
+ --autosquash master >actual &&
+ test_cmp expected actual
+'
test_expect_success 'static check of bad command' '
rebase_setup_and_clean bad-cmd &&
set_fake_editor &&
test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \
git rebase -i --root 2>actual &&
- test_i18ncmp expect actual &&
+ test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" actual &&
+ test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual &&
FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo &&
git rebase --continue &&
test E = $(git cat-file commit HEAD | sed -ne \$p) &&
test E = $(git cat-file commit HEAD | sed -ne \$p)
'
-cat >expect <<EOF
-Warning: the SHA-1 is missing or isn't a commit in the following line:
- - edit XXXXXXX False commit
-
-You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
-Or you can abort the rebase with 'git rebase --abort'.
-EOF
-
test_expect_success 'static check of bad SHA-1' '
rebase_setup_and_clean bad-sha &&
set_fake_editor &&
test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \
git rebase -i --root 2>actual &&
- test_i18ncmp expect actual &&
+ test_i18ngrep "edit XXXXXXX False commit" actual &&
+ test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual &&
FAKE_LINES="1 2 4 5 6" git rebase --edit-todo &&
git rebase --continue &&
test E = $(git cat-file commit HEAD | sed -ne \$p)
SQ="'"
test_expect_success 'rebase -i --gpg-sign=<key-id>' '
+ test_when_finished "test_might_fail git rebase --abort" &&
set_fake_editor &&
FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \
>out 2>err &&
test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err
'
+test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' '
+ test_when_finished "test_might_fail git rebase --abort" &&
+ test_config commit.gpgsign true &&
+ set_fake_editor &&
+ FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \
+ >out 2>err &&
+ test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err
+'
+
+test_expect_success 'valid author header after --root swap' '
+ rebase_setup_and_clean author-header no-conflict-branch &&
+ set_fake_editor &&
+ git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit &&
+ git cat-file commit HEAD | grep ^author >expected &&
+ FAKE_LINES="5 1" git rebase -i --root &&
+ git cat-file commit HEAD^ | grep ^author >actual &&
+ test_cmp expected actual
+'
+
+test_expect_success 'valid author header when author contains single quote' '
+ rebase_setup_and_clean author-header no-conflict-branch &&
+ set_fake_editor &&
+ git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit &&
+ git cat-file commit HEAD | grep ^author >expected &&
+ FAKE_LINES="2" git rebase -i HEAD~2 &&
+ git cat-file commit HEAD | grep ^author >actual &&
+ test_cmp expected actual
+'
+
test_done
projects / platform / upstream / git.git / blobdiff