. ./test-lib.sh
+try_local_x () {
+ local x="local" &&
+ echo "$x"
+}
+
+# This test is an experiment to check whether any Git users are using
+# Shells that don't support the "local" keyword. "local" is not
+# POSIX-standard, but it is very widely supported by POSIX-compliant
+# shells, and if it doesn't cause problems for people, we would like
+# to be able to use it in Git code.
+#
+# For now, this is the only test that requires "local". If your shell
+# fails this test, you can ignore the failure, but please report the
+# problem to the Git mailing list <git@vger.kernel.org>, as it might
+# convince us to continue avoiding the use of "local".
+test_expect_success 'verify that the running shell supports "local"' '
+ x="notlocal" &&
+ echo "local" >expected1 &&
+ try_local_x >actual1 &&
+ test_cmp expected1 actual1 &&
+ echo "notlocal" >expected2 &&
+ echo "$x" >actual2 &&
+ test_cmp expected2 actual2
+'
+
################################################################
# git init has been done in an empty repository.
# make sure it is empty.
:
'
-run_sub_test_lib_test () {
- name="$1" descr="$2" # stdin is the body of the test code
- shift 2
+_run_sub_test_lib_test_common () {
+ neg="$1" name="$2" descr="$3" # stdin is the body of the test code
+ shift 3
mkdir "$name" &&
(
# Pretend we're not running under a test harness, whether we
passing metrics
'
+ # Tell the framework that we are self-testing to make sure
+ # it yields a stable result.
+ GIT_TEST_FRAMEWORK_SELFTEST=t &&
+
# Point to the t/test-lib.sh, which isn't in ../ as usual
. "\$TEST_DIRECTORY"/test-lib.sh
EOF
export TEST_DIRECTORY &&
TEST_OUTPUT_DIRECTORY=$(pwd) &&
export TEST_OUTPUT_DIRECTORY &&
- ./"$name.sh" "$@" >out 2>err
+ if test -z "$neg"
+ then
+ ./"$name.sh" "$@" >out 2>err
+ else
+ ! ./"$name.sh" "$@" >out 2>err
+ fi
)
}
+run_sub_test_lib_test () {
+ _run_sub_test_lib_test_common '' "$@"
+}
+
+run_sub_test_lib_test_err () {
+ _run_sub_test_lib_test_common '!' "$@"
+}
+
check_sub_test_lib_test () {
name="$1" # stdin is the expected output from the test
(
cd "$name" &&
- ! test -s err &&
+ test_must_be_empty err &&
sed -e 's/^> //' -e 's/Z$//' >expect &&
test_cmp expect out
)
}
+check_sub_test_lib_test_err () {
+ name="$1" # stdin is the expected output from the test
+ # expected error output is in descriptior 3
+ (
+ cd "$name" &&
+ sed -e 's/^> //' -e 's/Z$//' >expect.out &&
+ test_cmp expect.out out &&
+ sed -e 's/^> //' -e 's/Z$//' <&3 >expect.err &&
+ test_cmp expect.err err
+ )
+}
+
test_expect_success 'pretend we have a fully passing test suite' "
run_sub_test_lib_test full-pass '3 passing tests' <<-\\EOF &&
for i in 1 2 3
EOF
"
-test_expect_success 'test --verbose' '
+test_expect_success C_LOCALE_OUTPUT 'test --verbose' '
test_must_fail run_sub_test_lib_test \
test-verbose "test verbose" --verbose <<-\EOF &&
test_expect_success "passing test" true
test_expect_success "failing test" false
test_done
EOF
- mv test-verbose/out test-verbose/out+
+ mv test-verbose/out test-verbose/out+ &&
grep -v "^Initialized empty" test-verbose/out+ >test-verbose/out &&
check_sub_test_lib_test test-verbose <<-\EOF
> expecting success: true
EOF
'
+test_expect_success 'GIT_SKIP_TESTS' "
+ (
+ GIT_SKIP_TESTS='git.2' && export GIT_SKIP_TESTS &&
+ run_sub_test_lib_test git-skip-tests-basic \
+ 'GIT_SKIP_TESTS' <<-\\EOF &&
+ for i in 1 2 3
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test git-skip-tests-basic <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (GIT_SKIP_TESTS)
+ > ok 3 - passing test #3
+ > # passed all 3 test(s)
+ > 1..3
+ EOF
+ )
+"
+
+test_expect_success 'GIT_SKIP_TESTS several tests' "
+ (
+ GIT_SKIP_TESTS='git.2 git.5' && export GIT_SKIP_TESTS &&
+ run_sub_test_lib_test git-skip-tests-several \
+ 'GIT_SKIP_TESTS several tests' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test git-skip-tests-several <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (GIT_SKIP_TESTS)
+ > ok 3 - passing test #3
+ > ok 4 - passing test #4
+ > ok 5 # skip passing test #5 (GIT_SKIP_TESTS)
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+ )
+"
+
+test_expect_success 'GIT_SKIP_TESTS sh pattern' "
+ (
+ GIT_SKIP_TESTS='git.[2-5]' && export GIT_SKIP_TESTS &&
+ run_sub_test_lib_test git-skip-tests-sh-pattern \
+ 'GIT_SKIP_TESTS sh pattern' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test git-skip-tests-sh-pattern <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (GIT_SKIP_TESTS)
+ > ok 3 # skip passing test #3 (GIT_SKIP_TESTS)
+ > ok 4 # skip passing test #4 (GIT_SKIP_TESTS)
+ > ok 5 # skip passing test #5 (GIT_SKIP_TESTS)
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+ )
+"
+
+test_expect_success '--run basic' "
+ run_sub_test_lib_test run-basic \
+ '--run basic' --run='1 3 5' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-basic <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with a range' "
+ run_sub_test_lib_test run-range \
+ '--run with a range' --run='1-3' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-range <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 # skip passing test #5 (--run)
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with two ranges' "
+ run_sub_test_lib_test run-two-ranges \
+ '--run with two ranges' --run='1-2 5-6' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-two-ranges <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with a left open range' "
+ run_sub_test_lib_test run-left-open-range \
+ '--run with a left open range' --run='-3' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-left-open-range <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 # skip passing test #5 (--run)
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with a right open range' "
+ run_sub_test_lib_test run-right-open-range \
+ '--run with a right open range' --run='4-' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-right-open-range <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with basic negation' "
+ run_sub_test_lib_test run-basic-neg \
+ '--run with basic negation' --run='"'!3'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-basic-neg <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with two negations' "
+ run_sub_test_lib_test run-two-neg \
+ '--run with two negations' --run='"'!3 !6'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-two-neg <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run a range and negation' "
+ run_sub_test_lib_test run-range-and-neg \
+ '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-range-and-neg <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 - passing test #3
+ > ok 4 - passing test #4
+ > ok 5 # skip passing test #5 (--run)
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run range negation' "
+ run_sub_test_lib_test run-range-neg \
+ '--run range negation' --run='"'!1-3'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-range-neg <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run include, exclude and include' "
+ run_sub_test_lib_test run-inc-neg-inc \
+ '--run include, exclude and include' \
+ --run='"'1-5 !1-3 2'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-inc-neg-inc <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run include, exclude and include, comma separated' "
+ run_sub_test_lib_test run-inc-neg-inc-comma \
+ '--run include, exclude and include, comma separated' \
+ --run=1-5,\!1-3,2 <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-inc-neg-inc-comma <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run exclude and include' "
+ run_sub_test_lib_test run-neg-inc \
+ '--run exclude and include' \
+ --run='"'!3- 5'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-neg-inc <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run empty selectors' "
+ run_sub_test_lib_test run-empty-sel \
+ '--run empty selectors' \
+ --run='1,,3,,,5' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-empty-sel <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run invalid range start' "
+ run_sub_test_lib_test_err run-inv-range-start \
+ '--run invalid range start' \
+ --run='a-5' <<-\\EOF &&
+ test_expect_success \"passing test #1\" 'true'
+ test_done
+ EOF
+ check_sub_test_lib_test_err run-inv-range-start \
+ <<-\\EOF_OUT 3<<-\\EOF_ERR
+ > FATAL: Unexpected exit with code 1
+ EOF_OUT
+ > error: --run: invalid non-numeric in range start: 'a-5'
+ EOF_ERR
+"
+
+test_expect_success '--run invalid range end' "
+ run_sub_test_lib_test_err run-inv-range-end \
+ '--run invalid range end' \
+ --run='1-z' <<-\\EOF &&
+ test_expect_success \"passing test #1\" 'true'
+ test_done
+ EOF
+ check_sub_test_lib_test_err run-inv-range-end \
+ <<-\\EOF_OUT 3<<-\\EOF_ERR
+ > FATAL: Unexpected exit with code 1
+ EOF_OUT
+ > error: --run: invalid non-numeric in range end: '1-z'
+ EOF_ERR
+"
+
+test_expect_success '--run invalid selector' "
+ run_sub_test_lib_test_err run-inv-selector \
+ '--run invalid selector' \
+ --run='1?' <<-\\EOF &&
+ test_expect_success \"passing test #1\" 'true'
+ test_done
+ EOF
+ check_sub_test_lib_test_err run-inv-selector \
+ <<-\\EOF_OUT 3<<-\\EOF_ERR
+ > FATAL: Unexpected exit with code 1
+ EOF_OUT
+ > error: --run: invalid non-numeric in test selector: '1?'
+ EOF_ERR
+"
+
+
test_set_prereq HAVEIT
haveit=no
test_expect_success HAVEIT 'test runs if prerequisite is satisfied' '
EOF
"
+test_expect_success 'test_oid setup' '
+ test_oid_init
+'
+
+test_expect_success 'test_oid provides sane info by default' '
+ test_oid zero >actual &&
+ grep "^00*\$" actual &&
+ rawsz="$(test_oid rawsz)" &&
+ hexsz="$(test_oid hexsz)" &&
+ test "$hexsz" -eq $(wc -c <actual) &&
+ test $(( $rawsz * 2)) -eq "$hexsz"
+'
+
+test_expect_success 'test_oid can look up data for SHA-1' '
+ test_when_finished "test_detect_hash" &&
+ test_set_hash sha1 &&
+ test_oid zero >actual &&
+ grep "^00*\$" actual &&
+ rawsz="$(test_oid rawsz)" &&
+ hexsz="$(test_oid hexsz)" &&
+ test $(wc -c <actual) -eq 40 &&
+ test "$rawsz" -eq 20 &&
+ test "$hexsz" -eq 40
+'
+
+test_expect_success 'test_oid can look up data for SHA-256' '
+ test_when_finished "test_detect_hash" &&
+ test_set_hash sha256 &&
+ test_oid zero >actual &&
+ grep "^00*\$" actual &&
+ rawsz="$(test_oid rawsz)" &&
+ hexsz="$(test_oid hexsz)" &&
+ test $(wc -c <actual) -eq 64 &&
+ test "$rawsz" -eq 32 &&
+ test "$hexsz" -eq 64
+'
+
################################################################
# Basics of the basics
+test_oid_cache <<\EOF
+path0f sha1:f87290f8eb2cbbea7857214459a0739927eab154
+path0f sha256:638106af7c38be056f3212cbd7ac65bc1bac74f420ca5a436ff006a9d025d17d
+
+path0s sha1:15a98433ae33114b085f3eb3bb03b832b3180a01
+path0s sha256:3a24cc53cf68edddac490bbf94a418a52932130541361f685df685e41dd6c363
+
+path2f sha1:3feff949ed00a62d9f7af97c15cd8a30595e7ac7
+path2f sha256:2a7f36571c6fdbaf0e3f62751a0b25a3f4c54d2d1137b3f4af9cb794bb498e5f
+
+path2s sha1:d8ce161addc5173867a3c3c730924388daedbc38
+path2s sha256:18fd611b787c2e938ddcc248fabe4d66a150f9364763e9ec133dd01d5bb7c65a
+
+path2d sha1:58a09c23e2ca152193f2786e06986b7b6712bdbe
+path2d sha256:00e4b32b96e7e3d65d79112dcbea53238a22715f896933a62b811377e2650c17
+
+path3f sha1:0aa34cae68d0878578ad119c86ca2b5ed5b28376
+path3f sha256:09f58616b951bd571b8cb9dc76d372fbb09ab99db2393f5ab3189d26c45099ad
+
+path3s sha1:8599103969b43aff7e430efea79ca4636466794f
+path3s sha256:fce1aed087c053306f3f74c32c1a838c662bbc4551a7ac2420f5d6eb061374d0
+
+path3d sha1:21ae8269cacbe57ae09138dcc3a2887f904d02b3
+path3d sha256:9b60497be959cb830bf3f0dc82bcc9ad9e925a24e480837ade46b2295e47efe1
+
+subp3f sha1:00fb5908cb97c2564a9783c0c64087333b3b464f
+subp3f sha256:a1a9e16998c988453f18313d10375ee1d0ddefe757e710dcae0d66aa1e0c58b3
+
+subp3s sha1:6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c
+subp3s sha256:81759d9f5e93c6546ecfcadb560c1ff057314b09f93fe8ec06e2d8610d34ef10
+
+subp3d sha1:3c5e5399f3a333eddecce7a9b9465b63f65f51e2
+subp3d sha256:76b4ef482d4fa1c754390344cf3851c7f883b27cf9bc999c6547928c46aeafb7
+
+root sha1:087704a96baf1c2d1c869a8b084481e121c88b5b
+root sha256:9481b52abab1b2ffeedbf9de63ce422b929f179c1b98ff7bee5f8f1bc0710751
+
+simpletree sha1:7bb943559a305bdd6bdee2cef6e5df2413c3d30a
+simpletree sha256:1710c07a6c86f9a3c7376364df04c47ee39e5a5e221fcdd84b743bc9bb7e2bc5
+EOF
+
# updating a new file without --add should fail.
test_expect_success 'git update-index without --add should fail adding' '
test_must_fail git update-index should-be-empty
# we know the shape and contents of the tree and know the object ID for it.
test_expect_success 'validate object ID of a known tree' '
- test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a
+ test "$tree" = "$(test_oid simpletree)"
'
# Removing paths.
'
test_expect_success 'validate object ID of a known tree' '
- test "$tree" = 4b825dc642cb6eb9a060e54bf8d69288fbee4904
+ test "$tree" = $EMPTY_TREE
'
# Various types of objects
'
test_expect_success 'validate git ls-files output for a known tree' '
- cat >expected <<-\EOF &&
- 100644 f87290f8eb2cbbea7857214459a0739927eab154 0 path0
- 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0 path0sym
- 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0 path2/file2
- 120000 d8ce161addc5173867a3c3c730924388daedbc38 0 path2/file2sym
- 100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0 path3/file3
- 120000 8599103969b43aff7e430efea79ca4636466794f 0 path3/file3sym
- 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0 path3/subp3/file3
- 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0 path3/subp3/file3sym
+ cat >expected <<-EOF &&
+ 100644 $(test_oid path0f) 0 path0
+ 120000 $(test_oid path0s) 0 path0sym
+ 100644 $(test_oid path2f) 0 path2/file2
+ 120000 $(test_oid path2s) 0 path2/file2sym
+ 100644 $(test_oid path3f) 0 path3/file3
+ 120000 $(test_oid path3s) 0 path3/file3sym
+ 100644 $(test_oid subp3f) 0 path3/subp3/file3
+ 120000 $(test_oid subp3s) 0 path3/subp3/file3sym
EOF
test_cmp expected current
'
'
test_expect_success 'validate object ID for a known tree' '
- test "$tree" = 087704a96baf1c2d1c869a8b084481e121c88b5b
+ test "$tree" = "$(test_oid root)"
'
test_expect_success 'showing tree with git ls-tree' '
'
test_expect_success 'git ls-tree output for a known tree' '
- cat >expected <<-\EOF &&
- 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0
- 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym
- 040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe path2
- 040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3 path3
+ cat >expected <<-EOF &&
+ 100644 blob $(test_oid path0f) path0
+ 120000 blob $(test_oid path0s) path0sym
+ 040000 tree $(test_oid path2d) path2
+ 040000 tree $(test_oid path3d) path3
EOF
test_cmp expected current
'
'
test_expect_success 'git ls-tree -r output for a known tree' '
- cat >expected <<-\EOF &&
- 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0
- 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym
- 100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 path2/file2
- 120000 blob d8ce161addc5173867a3c3c730924388daedbc38 path2/file2sym
- 100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376 path3/file3
- 120000 blob 8599103969b43aff7e430efea79ca4636466794f path3/file3sym
- 100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f path3/subp3/file3
- 120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c path3/subp3/file3sym
+ cat >expected <<-EOF &&
+ 100644 blob $(test_oid path0f) path0
+ 120000 blob $(test_oid path0s) path0sym
+ 100644 blob $(test_oid path2f) path2/file2
+ 120000 blob $(test_oid path2s) path2/file2sym
+ 100644 blob $(test_oid path3f) path3/file3
+ 120000 blob $(test_oid path3s) path3/file3sym
+ 100644 blob $(test_oid subp3f) path3/subp3/file3
+ 120000 blob $(test_oid subp3s) path3/subp3/file3sym
EOF
test_cmp expected current
'
'
test_expect_success 'git ls-tree -r output for a known tree' '
- cat >expected <<-\EOF &&
- 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0
- 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym
- 040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe path2
- 100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 path2/file2
- 120000 blob d8ce161addc5173867a3c3c730924388daedbc38 path2/file2sym
- 040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3 path3
- 100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376 path3/file3
- 120000 blob 8599103969b43aff7e430efea79ca4636466794f path3/file3sym
- 040000 tree 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 path3/subp3
- 100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f path3/subp3/file3
- 120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c path3/subp3/file3sym
+ cat >expected <<-EOF &&
+ 100644 blob $(test_oid path0f) path0
+ 120000 blob $(test_oid path0s) path0sym
+ 040000 tree $(test_oid path2d) path2
+ 100644 blob $(test_oid path2f) path2/file2
+ 120000 blob $(test_oid path2s) path2/file2sym
+ 040000 tree $(test_oid path3d) path3
+ 100644 blob $(test_oid path3f) path3/file3
+ 120000 blob $(test_oid path3s) path3/file3sym
+ 040000 tree $(test_oid subp3d) path3/subp3
+ 100644 blob $(test_oid subp3f) path3/subp3/file3
+ 120000 blob $(test_oid subp3s) path3/subp3/file3sym
EOF
test_cmp expected current
'
'
test_expect_success 'validate object ID for a known tree' '
- test "$ptree" = 21ae8269cacbe57ae09138dcc3a2887f904d02b3
+ test "$ptree" = $(test_oid path3d)
'
test_expect_success 'writing partial tree out with git write-tree --prefix' '
'
test_expect_success 'validate object ID for a known tree' '
- test "$ptree" = 3c5e5399f3a333eddecce7a9b9465b63f65f51e2
+ test "$ptree" = $(test_oid subp3d)
'
test_expect_success 'put invalid objects into the index' '
rm -f .git/index &&
- cat >badobjects <<-\EOF &&
- 100644 blob 1000000000000000000000000000000000000000 dir/file1
- 100644 blob 2000000000000000000000000000000000000000 dir/file2
- 100644 blob 3000000000000000000000000000000000000000 dir/file3
- 100644 blob 4000000000000000000000000000000000000000 dir/file4
- 100644 blob 5000000000000000000000000000000000000000 dir/file5
+ suffix=$(echo $ZERO_OID | sed -e "s/^.//") &&
+ cat >badobjects <<-EOF &&
+ 100644 blob $(test_oid 001) dir/file1
+ 100644 blob $(test_oid 002) dir/file2
+ 100644 blob $(test_oid 003) dir/file3
+ 100644 blob $(test_oid 004) dir/file4
+ 100644 blob $(test_oid 005) dir/file5
EOF
git update-index --index-info <badobjects
'
################################################################
test_expect_success 'git read-tree followed by write-tree should be idempotent' '
- rm -f .git/index
+ rm -f .git/index &&
git read-tree $tree &&
test -f .git/index &&
newtree=$(git write-tree) &&
'
test_expect_success 'validate git diff-files output for a know cache/work tree state' '
- cat >expected <<\EOF &&
-:100644 100644 f87290f8eb2cbbea7857214459a0739927eab154 0000000000000000000000000000000000000000 M path0
-:120000 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0000000000000000000000000000000000000000 M path0sym
-:100644 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0000000000000000000000000000000000000000 M path2/file2
-:120000 120000 d8ce161addc5173867a3c3c730924388daedbc38 0000000000000000000000000000000000000000 M path2/file2sym
-:100644 100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0000000000000000000000000000000000000000 M path3/file3
-:120000 120000 8599103969b43aff7e430efea79ca4636466794f 0000000000000000000000000000000000000000 M path3/file3sym
-:100644 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0000000000000000000000000000000000000000 M path3/subp3/file3
-:120000 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0000000000000000000000000000000000000000 M path3/subp3/file3sym
+ cat >expected <<EOF &&
+:100644 100644 $(test_oid path0f) $ZERO_OID M path0
+:120000 120000 $(test_oid path0s) $ZERO_OID M path0sym
+:100644 100644 $(test_oid path2f) $ZERO_OID M path2/file2
+:120000 120000 $(test_oid path2s) $ZERO_OID M path2/file2sym
+:100644 100644 $(test_oid path3f) $ZERO_OID M path3/file3
+:120000 120000 $(test_oid path3s) $ZERO_OID M path3/file3sym
+:100644 100644 $(test_oid subp3f) $ZERO_OID M path3/subp3/file3
+:120000 120000 $(test_oid subp3s) $ZERO_OID M path3/subp3/file3sym
EOF
git diff-files >current &&
- test_cmp current expected
+ test_cmp expected current
'
test_expect_success 'git update-index --refresh should succeed' '
'
################################################################
-P=087704a96baf1c2d1c869a8b084481e121c88b5b
+P=$(test_oid root)
test_expect_success 'git commit-tree records the correct tree in a commit' '
commit0=$(echo NO | git commit-tree $P) &&
(
git ls-files -s path4 |
sed -e "s/ .*/ /" |
- tr -d "\012"
+ tr -d "\012" &&
echo "$a"
) | git update-index --index-info &&
len=$(git ls-files "a*" | wc -c) &&