#! /bin/sh
-# Script to build release-archives with
+# Script to build release-archives with. Note that this requires a checkout
+# from git and you should first run ./buildconf and build curl once.
#
+#***************************************************************************
+# _ _ ____ _
+# Project ___| | | | _ \| |
+# / __| | | | |_) | |
+# | (__| |_| | _ <| |___
+# \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.\r
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
-echo "LIB version number?"
-read version
+version=$1
+
+if [ -z "$version" ]; then
+ echo "Specify a version number!"
+ exit
+fi
libversion="$version"
-echo "CURL version number?"
-read curlversion
+# we make curl the same version as libcurl
+curlversion=$libversion
-HEADER=include/curl/curl.h
-CHEADER=src/version.h
+major=`echo $libversion |cut -d. -f1 | sed -e "s/[^0-9]//g"`
+minor=`echo $libversion |cut -d. -f2 | sed -e "s/[^0-9]//g"`
+patch=`echo $libversion |cut -d. -f3 | cut -d- -f1 | sed -e "s/[^0-9]//g"`
+numeric=`perl -e 'printf("%02x%02x%02x\n", '"$major, $minor, $patch);"`
-# Replace version number in header file:
-sed 's/#define LIBCURL_VERSION.*/#define LIBCURL_VERSION "'$libversion'"/g' $HEADER >$HEADER.new
+HEADER=include/curl/curlver.h
+CHEADER=src/tool_version.h
-# Save old header file
-cp -p $HEADER $HEADER.old
+# requires a date command that knows -u for UTC time zone
+datestamp=`date -u`
-# Make new header:
-mv $HEADER.new $HEADER
+# Replace version number in header file:
+sed -e 's/^#define LIBCURL_VERSION .*/#define LIBCURL_VERSION "'$libversion'"/g' \
+ -e 's/^#define LIBCURL_VERSION_NUM .*/#define LIBCURL_VERSION_NUM 0x'$numeric'/g' \
+ -e 's/^#define LIBCURL_VERSION_MAJOR .*/#define LIBCURL_VERSION_MAJOR '$major'/g' \
+ -e 's/^#define LIBCURL_VERSION_MINOR .*/#define LIBCURL_VERSION_MINOR '$minor'/g' \
+ -e 's/^#define LIBCURL_VERSION_PATCH .*/#define LIBCURL_VERSION_PATCH '$patch'/g' \
+ -e "s/^#define LIBCURL_TIMESTAMP .*/#define LIBCURL_TIMESTAMP \"$datestamp\"/g" \
+ $HEADER >$HEADER.dist
# Replace version number in header file:
-sed 's/#define CURL_VERSION.*/#define CURL_VERSION "'$curlversion'"/g' $CHEADER >$CHEADER.new
+sed 's/#define CURL_VERSION .*/#define CURL_VERSION "'$curlversion'"/g' $CHEADER >$CHEADER.dist
+
+# Generate VC8, VC9, and VC10 versions from the VC6 Makefile versions
+for ver in vc8 vc9 vc10; do
+ make -f Makefile.dist $ver
+ mv src/Makefile.$ver src/Makefile.$ver.dist
+ mv lib/Makefile.$ver lib/Makefile.$ver.dist
+done
-# Save old header file
-cp -p $CHEADER $CHEADER.old
+# Replace version number in plist file:
+PLIST=lib/libcurl.plist
+sed "s/7\.12\.3/$libversion/g" $PLIST > $PLIST.dist
-# Make new header:
-mv $CHEADER.new $CHEADER
+echo "curl version $curlversion"
+echo "libcurl version $libversion"
+echo "libcurl numerical $numeric"
+echo "datestamp $datestamp"
findprog()
{
############################################################################
#
-# If we have autoconf we can just as well update configure.in to contain our
-# brand new version number:
+# Enforce a rerun of configure (updates the VERSION)
#
-
-if { findprog autoconf >/dev/null 2>/dev/null; } then
- echo "- No autoconf found, we leave configure as it is"
-else
- # Replace version number in configure.in file:
- CONF="configure.in"
-
- sed 's/^AM_INIT_AUTOMAKE.*/AM_INIT_AUTOMAKE(curl,"'$version'")/g' $CONF >$CONF.new
-
- # Save old file
- cp -p $CONF $CONF.old
-
- # Make new configure.in
- mv $CONF.new $CONF
-
- # Update the configure script
- echo "Runs autoconf"
- autoconf
-fi
+echo "Re-running config.status"
+./config.status --recheck >/dev/null
############################################################################
#
echo "- Could not find or run automake, I hope you know what you're doing!"
else
echo "Runs automake --include-deps"
- automake --include-deps
+ automake --include-deps Makefile >/dev/null
fi
############################################################################
#
-# Now run make first to make the file dates decent and make sure that it
-# compiles just before release!
+# Make sure we have updated HTML versions of all man pages:
#
+echo "make html"
+make -s html
-make
+# And the PDF versions
+echo "make pdf"
+make -s pdf
-# get current dir
-dir=`pwd`
+# And the IDE files
+echo "make vc-ide"
+make -s vc-ide
-# Get basename
-orig=`basename $dir`
+echo "produce CHANGES"
+git log --pretty=fuller --no-color --date=short --decorate=full -1000 | ./log2changes.pl > CHANGES.dist
-# Get the left part of the dash (-)
-new=`echo $orig | cut -d- -f1`
-
-# Build new directory name
-n=$new-$version;
-
-# Tell the world what we're doing
-echo "Copying files into distribution archive";
-
-if [ -r $n ]; then
- echo "Directory already exists!"
- exit
-fi
+############################################################################
+#
+# Now run make dist to generate a tar.gz archive
+#
-# Create the new dir
-mkdir $n
+echo "make dist"
+targz="curl-$version.tar.gz"
+make -s dist VERSION=$version
-# Copy all relevant files, with path and permissions!
-tar -cf - `cat FILES` | (cd $n; tar -xBpf -)
+############################################################################
+#
+# Now make a bz2 archive from the tar.gz original
+#
-# Create the distribution root Makefile from Makefile.dist
-cp -p Makefile.dist $n/Makefile
+bzip2="curl-$version.tar.bz2"
+echo "Generating $bzip2"
+gzip -dc $targz | bzip2 --best > $bzip2
############################################################################
#
-# Replace @SHELL@ with /bin/sh in the Makefile.in files!
+# Now make an lzma archive from the tar.gz original
#
-echo "Replace @SHELL@ with /bin/sh in the Makefile.in files"
-temp=/tmp/curl$$
-for file in Makefile.in lib/Makefile.in src/Makefile.in; do
- in="$n/$file"
- sed "s:@SHELL@:/bin/sh:g" $in >$temp
- cp $temp $in
-done
-rm -rf $temp
-# Tell the world what we're doing
-echo "creates $n.tar.gz";
+lzma="curl-$version.tar.lzma"
+echo "Generating $lzma"
+gzip -dc $targz | lzma --best - > $lzma
-# Make a tar archive of it all
-tar -cvf $n.tar $n
+############################################################################
+#
+# Now make a zip archive from the tar.gz original
+#
+makezip ()
+{
+ rm -rf $tempdir
+ mkdir $tempdir
+ cd $tempdir
+ gzip -dc ../$targz | tar -xf -
+ find . | zip $zip -@ >/dev/null
+ mv $zip ../
+ cd ..
+ rm -rf $tempdir
+}
-# gzip the archive
-gzip $n.tar
+zip="curl-$version.zip"
+echo "Generating $zip"
+tempdir=".builddir"
+makezip
-# Make it world readable
-chmod a+r $n.tar.gz ;
+echo "------------------"
+echo "maketgz report:"
+echo ""
+ls -l $targz $bzip2 $zip $lzma
-# Delete the temp dir
-rm -rf $n
+echo "Run this:"
+echo "gpg -b -a $targz && gpg -b -a $bzip2 && gpg -b -a $zip && gpg -b -a $lzma"