configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

[platform/kernel/u-boot.git] / include / configs / sunxi-common.h

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 64a1900..681c91c 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -32,6 +32,10 @@
 # define CONFIG_MACH_TYPE_COMPAT_REV   1
 #endif
 
+#ifdef CONFIG_ARM64
+#define CONFIG_BUILD_TARGET "u-boot.itb"
+#endif
+
 /* Serial & console */
 #define CONFIG_SYS_NS16550_SERIAL
 /* ns16550 reg in the low bits of cpu reg */
@@ -118,7 +122,6 @@
 #define CONFIG_SYS_SCSI_MAX_LUN                1
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                         CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -176,8 +179,6 @@
 
 #define CONFIG_SYS_MONITOR_LEN         (768 << 10)     /* 768 KiB */
 
-#define CONFIG_FAT_WRITE       /* enable write access */
-
 #define CONFIG_SPL_FRAMEWORK
 
 #ifndef CONFIG_ARM64           /* AArch64 FEL support is not ready yet */
@@ -185,12 +186,17 @@
 #endif
 
 #ifdef CONFIG_SUNXI_HIGH_SRAM
-#define CONFIG_SPL_TEXT_BASE           0x10040         /* sram start+header */
-#define CONFIG_SPL_MAX_SIZE            0x7fc0          /* 32 KiB */
+#define CONFIG_SPL_TEXT_BASE           0x10060         /* sram start+header */
+#define CONFIG_SPL_MAX_SIZE            0x7fa0          /* 32 KiB */
+#ifdef CONFIG_ARM64
+/* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
+#define LOW_LEVEL_SRAM_STACK           0x00054000
+#else
 #define LOW_LEVEL_SRAM_STACK           0x00018000
+#endif /* !CONFIG_ARM64 */
 #else
-#define CONFIG_SPL_TEXT_BASE           0x40            /* sram start+header */
-#define CONFIG_SPL_MAX_SIZE            0x5fc0          /* 24KB on sun4i/sun7i */
+#define CONFIG_SPL_TEXT_BASE           0x60            /* sram start+header */
+#define CONFIG_SPL_MAX_SIZE            0x5fa0          /* 24KB on sun4i/sun7i */
 #define LOW_LEVEL_SRAM_STACK           0x00008000      /* End of sram */
 #endif
 
@@ -211,11 +217,13 @@
 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
+#ifndef CONFIG_DM_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SPEED           400000
 #define CONFIG_SYS_I2C_SLAVE           0x7f
 #endif
+#endif
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 #define CONFIG_SYS_I2C_SOFT
@@ -302,7 +310,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_OHCI_SUNXI
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 #endif
 
 #ifdef CONFIG_USB_MUSB_SUNXI
@@ -473,6 +480,11 @@ extern int soft_i2c_gpio_scl;
 #define CONSOLE_STDOUT_SETTINGS \
        "stdout=serial,vga\0" \
        "stderr=serial,vga\0"
+#elif CONFIG_DM_VIDEO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONSOLE_STDOUT_SETTINGS \
+       "stdout=serial,vidconsole\0" \
+       "stderr=serial,vidconsole\0"
 #else
 #define CONSOLE_STDOUT_SETTINGS \
        "stdout=serial\0" \