+/* SPDX-License-Identifier: GPL-2.0 */
/*
* include/configs/silk.h
* This file is silk board configuration.
*
* Copyright (C) 2015 Renesas Electronics Corporation
* Copyright (C) 2015 Cogent Embedded, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0
*/
#ifndef __SILK_H
#define __SILK_H
-#undef DEBUG
-#define CONFIG_ARCH_RMOBILE_BOARD_STRING "Silk"
-
#include "rcar-gen2-common.h"
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_TEXT_BASE 0x70000000
-#else
-#define CONFIG_SYS_TEXT_BASE 0xE6304000
-#endif
-
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
-#endif
-#define STACK_AREA_SIZE 0xC000
+#define STACK_AREA_SIZE 0x00100000
#define LOW_LEVEL_MERAM_STACK \
- (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+ (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define RCAR_GEN2_SDRAM_BASE 0x40000000
#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
-/* SCIF */
-
-/* FLASH */
-#define CONFIG_SPI
-#define CONFIG_SH_QSPI
-#define CONFIG_SPI_FLASH_QUAD
-
/* SH Ether */
-#define CONFIG_SH_ETHER_USE_PORT 0
-#define CONFIG_SH_ETHER_PHY_ADDR 0x1
-#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SH_ETHER_CACHE_WRITEBACK
-#define CONFIG_SH_ETHER_CACHE_INVALIDATE
-#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
+#define CFG_SH_ETHER_USE_PORT 0
+#define CFG_SH_ETHER_PHY_ADDR 0x1
+#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CFG_SH_ETHER_CACHE_WRITEBACK
+#define CFG_SH_ETHER_CACHE_INVALIDATE
+#define CFG_SH_ETHER_ALIGNE_SIZE 64
/* Board Clock */
-#define RMOBILE_XTAL_CLK 20000000u
-#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
-#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
-
-#define CONFIG_SYS_TMU_CLK_DIV 4
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
-#define CONFIG_SYS_I2C_SH_SPEED0 400000
-#define CONFIG_SYS_I2C_SH_SPEED1 400000
-#define CONFIG_SYS_I2C_SH_SPEED2 400000
-#define CONFIG_SH_I2C_DATA_HIGH 4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK 10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-/* MMCIF */
-#define CONFIG_SH_MMCIF
-#define CONFIG_SH_MMCIF_ADDR 0xee200000
-#define CONFIG_SH_MMCIF_CLK 48000000
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ 97500000
+#define CFG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x10000000\0"
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA 0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA 0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA 0x00000180
-/* SCIF2 */
-#define CONFIG_SMSTP7_ENA 0x00080000
+/* SPL support */
#endif /* __SILK_H */