Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig

[platform/kernel/u-boot.git] / include / configs / siemens-am33x-common.h

diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index dd63adb..615458c 100644 (file)
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -18,23 +18,12 @@
 #define CONFIG_DMA_COHERENT
 #define CONFIG_DMA_COHERENT_SIZE       (1 << 20)
 
-#define CONFIG_SYS_MALLOC_LEN          (16 * 1024 * 1024)
-#ifdef CONFIG_SIEMENS_MACH_TYPE
-#define CONFIG_MACH_TYPE               CONFIG_SIEMENS_MACH_TYPE
-#endif
-
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
 /* commands to include */
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_ROOTPATH                "/opt/eldk"
 #endif
 
-#define CONFIG_ENV_OVERWRITE           1
-
 #define CONFIG_SYS_AUTOLOAD    "yes"
 
 /* Clock Defines */
@@ -54,11 +43,6 @@
  * memtest works on 8 MB in DRAM after skipping 32MB from
  * start addr of ram disk
  */
-#define CONFIG_SYS_MEMTEST_START       (PHYS_DRAM_1 + (64 * 1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START \
-                                       + (8 * 1024 * 1024))
-
-#define CONFIG_SYS_LOAD_ADDR           0x81000000 /* Default load address */
 
  /* Physical Memory Map */
 #define PHYS_DRAM_1                    0x80000000      /* DRAM Bank #1 */
@@ -71,18 +55,13 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 
 /* NS16550 Configuration */
-#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#endif
 #define CONFIG_SYS_NS16550_CLK         (48000000)
 #define CONFIG_SYS_NS16550_COM1                0x44e09000
 #define CONFIG_SYS_NS16550_COM4                0x481a6000
 
 
 /* I2C Configuration */
-#define CONFIG_I2C
-#define CONFIG_SYS_I2C
 
 /* Defines for SPL */
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
@@ -91,22 +70,8 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
-
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -117,7 +82,6 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
 
 #define CONFIG_SYS_NAND_ECCSTEPS       4
 #define        CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
@@ -125,8 +89,6 @@
 
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -140,9 +102,6 @@
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -157,7 +116,6 @@
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE   (1 << 20)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
 
 #endif /* CONFIG_SPL_BUILD */
@@ -174,18 +132,11 @@
  * 0xE0000 - 0x442000 : Linux Kernel
  * 0x442000 - 0x800000 : Userland
  */
-#if defined(CONFIG_SPI_BOOT)
-# define CONFIG_ENV_OFFSET             (892 << 10) /* 892 KiB in */
-# define CONFIG_ENV_SECT_SIZE          (4 << 10) /* 4 KB sectors */
-#endif /* SPI support */
-
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
+
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /* UBI Support */
 
 /* Commen environment */