Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig

[platform/kernel/u-boot.git] / include / configs / pm9261.h

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index d530107..278f1b5 100644 (file)
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -124,30 +124,11 @@
                 AT91_WDT_MR_WDDIS |                            \
                 AT91_WDT_MR_WDD(0xfff))
 
-/*
- * Hardware drivers
- */
-
-/* LCD */
-#define LCD_BPP                                LCD_COLOR8
-#define CONFIG_LCD_LOGO                        1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO                        1
-#define CONFIG_LCD_INFO_BELOW_LOGO     1
-#define CONFIG_ATMEL_LCD               1
-#define CONFIG_ATMEL_LCD_BGR555                1
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE      1
-
 /* SDRAM */
 #define PHYS_SDRAM                             0x20000000
 #define PHYS_SDRAM_SIZE                                0x04000000      /* 64 megs */
 
 /* NAND flash */
-#define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   0x40000000
 #define CONFIG_SYS_NAND_DBW_8                  1
 /* our ALE is AD22 */
@@ -160,53 +141,15 @@
 /* NOR flash */
 #define PHYS_FLASH_1                           0x10000000
 #define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT              256
-#define CONFIG_SYS_MAX_FLASH_BANKS             1
 
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW                    1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9261"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
-#undef CONFIG_SYS_USE_DATAFLASH_CS0
-#undef CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SYS_USE_FLASH   1
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x210000; " \
-                               "bootm 0x22000000"
-
-#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
-
-#elif defined (CONFIG_SYS_USE_FLASH)
-/* JFFS Partition offset set */
-#define CONFIG_SYS_JFFS2_FIRST_BANK    0
-#define CONFIG_SYS_JFFS2_NUM_BANKS     1
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR  11
-
-#define CONFIG_BOOTCOMMAND     "run flashboot"
-
-#define CONFIG_CON_ROT "fbcon=rotate:3 "
 
 #define CONFIG_EXTRA_ENV_SETTINGS                              \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                        \
        "partition=nand0,0\0"                                   \
        "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"     \
        "nfsargs=setenv bootargs root=/dev/nfs rw "             \
-               CONFIG_CON_ROT                                  \
+               "fbcon=rotate:3 "                               \
                "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
        "addip=setenv bootargs $(bootargs) "                    \
                "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
@@ -217,12 +160,7 @@
                "run nfsargs;run addip;bootm 22000000\0"        \
        "flashboot=run ramargs;run addip;bootm 0x10050000\0"    \
        ""
-#else
-#error "Undefined memory device"
-#endif
 
 #define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
-                               GENERATED_GBL_DATA_SIZE)
 
 #endif