configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

[platform/kernel/u-boot.git] / include / configs / picosam9g45.h

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 21f99db..a14739f 100644 (file)
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -30,8 +30,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
@@ -44,16 +42,13 @@
 #define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP                                LCD_COLOR8
 #define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE            0x23E00000
 
@@ -78,9 +73,6 @@
  * Command line configuration.
  */
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1           ATMEL_BASE_CS1  /* on DDRSDRC1 */
@@ -95,15 +87,9 @@
 /* MMC */
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -111,11 +97,6 @@
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
 
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
@@ -131,8 +112,6 @@
  */
 #define FAT_ENV_DEVICE_AND_PART        "0"
 #define FAT_ENV_FILE           "uboot.env"
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
 #define CONFIG_ENV_SIZE                0x4000
 
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
@@ -142,8 +121,6 @@
                                "bootz 0x22000000 - 0x21000000"
 #endif
 
-#define CONFIG_BAUDRATE                        115200
-
 #define CONFIG_SYS_CBSIZE      256
 #define CONFIG_SYS_MAXARGS     16
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE  \
@@ -163,10 +140,6 @@
 #define CONFIG_SPL_MAX_SIZE            0x010000
 #define CONFIG_SPL_STACK               0x310000
 
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-
 #define CONFIG_SYS_MONITOR_LEN         0x80000
 
 #ifdef CONFIG_SYS_USE_MMC
@@ -177,12 +150,8 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00080000
 
 #define CONFIG_SPL_LDSCRIPT    arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK                132096000