Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig

[platform/kernel/u-boot.git] / include / configs / omap3_logic.h

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 2423dfa..e71f737 100644 (file)
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -14,32 +14,10 @@
 
 #include <configs/ti_omap3_common.h>
 
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
- * order to allow for BCH8 to fit in.
- */
-
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-/* Hardware drivers */
-
-/* I2C */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM AT24C64      */
-
 /* Board NAND Info. */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1         /* Max number of */
                                                  /* NAND devices */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
                                         13, 14, 16, 17, 18, 19, 20, 21, 22, \
                                         23, 24, 25, 26, 27, 28, 30, 31, 32, \
@@ -49,23 +27,18 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       13
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 #define CONFIG_SYS_NAND_MAX_ECCPOS     56
 #endif
 
 /* Environment information */
 
-#define CONFIG_PREBOOT \
-       "setenv preboot;"                                               \
-       "saveenv;"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
        "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"    \
        "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "mmcdev=0\0" \
-       "mmcroot=/dev/mmcblk0p2 rw\0" \
+       "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
        "mmcrootfstype=ext4 rootwait\0" \
        "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
        "nandrootfstype=ubifs rootwait\0" \
@@ -104,7 +77,8 @@
        "ramargs=setenv bootargs "\
                "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
        "mmcargs=setenv bootargs "\
-               "root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
+               "root=PARTUUID=${uuid} " \
+               "rootfstype=${mmcrootfstype} rw\0" \
        "nandargs=setenv bootargs "\
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
@@ -118,6 +92,7 @@
        "loadfdt=mmc rescan; " \
                "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
        "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
+               "run finduuid; "\
                "run mmcargs; " \
                "run common_bootargs; " \
                "run dump_bootargs; " \
@@ -173,9 +148,6 @@
 /* Miscellaneous configurable options */
 
 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END         (OMAP34XX_SDRC_CS0 + \
-                                       0x01F00000) /* 31MB */
 
 /* FLASH and environment organization */
 
@@ -192,11 +164,7 @@
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
-
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_ENV_OFFSET              0x260000
-#define CONFIG_ENV_ADDR                        0x260000
 
 /* Defines for SPL */