Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig

[platform/kernel/u-boot.git] / include / configs / omap3_evm.h

diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 52a22a9..77629d7 100644 (file)
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -26,28 +26,12 @@
 /* NAND */
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE          NAND_BASE
-#define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT      64
-#define CONFIG_SYS_NAND_PAGE_SIZE       2048
-#define CONFIG_SYS_NAND_OOBSIZE         64
-#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
-/* NAND: SPL falcon mode configs */
-#if defined(CONFIG_SPL_OS_BOOT)
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
-#endif /* CONFIG_SPL_OS_BOOT */
 #endif /* CONFIG_MTD_RAW_NAND */
 
-#define MEM_LAYOUT_ENV_SETTINGS \
-       DEFAULT_LINUX_BOOT_ENV
-
 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
        "bootcmd_" #devtypel #instance "=" \
        "setenv mmcdev " #instance "; " \
@@ -70,7 +54,7 @@
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(LEGACY_MMC, legacy_mmc, 0) \
-       func(UBIFS, ubifs, 0) \
+       func(UBIFS, ubifs, 0, rootfs, rootfs) \
        func(NAND, nand, 0)
 
 #else /* !CONFIG_MTD_RAW_NAND */
@@ -83,56 +67,20 @@
 
 #include <config_distro_bootcmd.h>
 
+#include <environment/ti/mmc.h>
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       MEM_LAYOUT_ENV_SETTINGS \
+       DEFAULT_LINUX_BOOT_ENV \
+       DEFAULT_MMC_TI_ARGS \
+       DEFAULT_FIT_TI_ARGS \
        "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "fdt_high=0xffffffff\0" \
        "console=ttyO0,115200n8\0" \
        "bootdir=/boot\0" \
        "bootenv=uEnv.txt\0" \
        "bootfile=zImage\0" \
        "bootpart=0:2\0" \
-       "bootubivol=rootfs\0" \
-       "bootubipart=rootfs\0" \
        "optargs=\0" \
-       "mmcdev=0\0" \
-       "mmcpart=2\0" \
-       "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext4 rootwait\0" \
-       "mmcargs=setenv bootargs console=${console} " \
-               "${mtdparts} " \
-               "${optargs} " \
-               "root=${mmcroot} " \
-               "rootfstype=${mmcrootfstype}\0" \
-       "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-       "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
-       "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-               "env import -t ${loadaddr} ${filesize}\0" \
-       "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
-               "mmc dev ${mmcdev}; " \
-               "if mmc rescan; then " \
-                       "run loadbootenv && run importbootenv; " \
-                       "run ext4bootenv && run importbootenv; " \
-                       "if test -n $uenvcmd; then " \
-                               "echo Running uenvcmd ...; " \
-                               "run uenvcmd; " \
-                       "fi; " \
-               "fi\0" \
-       "loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-       "loaddtb=ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-       "mmcboot=run mmcbootenv; " \
-               "if run loadimage && run loaddtb; then " \
-                       "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
-                       "run mmcargs; " \
-                       "if test ${bootfile} = uImage; then " \
-                               "bootm ${loadaddr} - ${fdtaddr}; " \
-                       "fi; " \
-                       "if test ${bootfile} = zImage; then " \
-                               "bootz ${loadaddr} - ${fdtaddr}; " \
-                       "fi; " \
-               "fi\0" \
        "nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \
        "nandrootfstype=ubifs rootwait\0" \
        "nandargs=setenv bootargs console=${console} " \