Merge branch '2022-08-04-Kconfig-migrations'

[platform/kernel/u-boot.git] / include / configs / ls1043ardb.h

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 7b6d193..d36b2c7 100644 (file)
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -8,26 +8,12 @@
 
 #include "ls1043a_common.h"
 
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
 /* Physical Memory Map */
-#define CONFIG_CHIP_SELECTS_PER_CTRL   4
-
-#define CONFIG_SYS_SPD_BUS_NUM         0
 
 #ifndef CONFIG_SPL
-#define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x90000000
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x10000
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x500
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 30
-#endif
-
 /*
  * NOR Flash Definitions
  */
@@ -56,15 +42,8 @@
 #define CONFIG_SYS_NOR_FTIM3           0
 #define CONFIG_SYS_IFC_CCR             0x01000000
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE_PHYS }
 
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 
 /*
@@ -106,7 +85,6 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_SPL_PAD_TO              0x20000         /* block aligned */
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (1024 << 10)
 #endif
 
@@ -229,17 +207,11 @@
 #define QSGMII_PORT4_PHY_ADDR          0x7
 
 #define FM1_10GEC1_PHY_ADDR            0x1
-
-#define CONFIG_ETHPRIME                        "FM1@DTSEC3"
 #endif
 #endif
 
 /* SATA */
 #ifndef SPL_NO_SATA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            2
-#define CONFIG_SYS_SCSI_MAX_LUN                        2
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}