/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*/
#ifndef __LS1012AFRWY_H__
#include "ls1012a_common.h"
-#undef CONFIG_SYS_BOARD
-#define CONFIG_SYS_BOARD "ls1012afrwy"
-
/* Board Rev*/
#define BOARD_REV_A_B 0x0
#define BOARD_REV_C 0x00080000
#define BOARD_REV_MASK 0x001A0000
/* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#define SYS_SDRAM_SIZE_512 0x20000000
#define SYS_SDRAM_SIZE_1024 0x40000000
-#define CONFIG_CHIP_SELECTS_PER_CTRL 1
/* ENV */
-#define CONFIG_SYS_FSL_QSPI_BASE 0x40000000
+#define CFG_SYS_FSL_QSPI_BASE 0x40000000
-#ifndef CONFIG_SPL_BUILD
#undef BOOT_TARGET_DEVICES
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
-#endif
-
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-#define CONFIG_PCIE1 /* PCIE controller 1 */
-
-#define CONFIG_PCI_SCAN_SHOW
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
- "fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
- "fdt_addr=0x00f00000\0" \
"kernel_addr=0x01000000\0" \
"kernel_size_sd=0x16000\0" \
"kernelhdr_size_sd=0x10\0" \
"load_addr=0x92000000\0" \
"kernel_size=0x2800000\0" \
"kernelheader_size=0x40000\0" \
+ "bootm_size=0x10000000\0" \
"console=ttyS0,115200\0" \
"BOARD=ls1012afrwy\0" \
BOOTENV \
"run scan_dev_for_boot; " \
"fi; " \
"done\0" \
- "scan_dev_for_boot=" \
- "echo Scanning ${devtype} " \
- "${devnum}:${distro_bootpart}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "run scan_dev_for_scripts; " \
- "done;" \
- "\0" \
"boot_a_script=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${scriptaddr} ${prefix}${script}; " \
"env exists secureboot " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "sd_bootcmd=pfe stop; echo Trying load from sd card..;" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
"mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
-#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_TFABOOT
#undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
"env exists secureboot && esbc_halt;"
-#else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
- "env exists secureboot && esbc_halt;"
#endif
#include <asm/fsl_secure_boot.h>