Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig

[platform/kernel/u-boot.git] / include / configs / kmcent2.h

diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h
index 707926f..6032f39 100644 (file)
--- a/include/configs/kmcent2.h
+++ b/include/configs/kmcent2.h
@@ -133,14 +133,10 @@
 #define KM_I2C_DEBLOCK_SDA     21
 
 /* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
-#define CONFIG_FSL_CORENET             /* Freescale CoreNet platform */
 
 #define CONFIG_RESET_VECTOR_ADDRESS    0xebfffffc
 
-#define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1                   /* PCIE controller 1 */
 
 /* Environment in parallel NOR-Flash */
 #define CONFIG_ENV_TOTAL_SIZE          0x040000
@@ -149,12 +145,8 @@
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0         L2CSR0_L2E
 
-#define CONFIG_ENABLE_36BIT_PHYS
-
 /* POST memory regions test */
 #define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS
 
@@ -162,7 +154,6 @@
  *  Config the L3 Cache as L3 SRAM
  */
 #define CONFIG_SYS_INIT_L3_ADDR                0xFFFC0000
-#define CONFIG_SYS_L3_SIZE             256 << 10
 
 #define CONFIG_SYS_DCSRBAR             0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS                0xf00000000ull
@@ -174,9 +165,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
-
-#define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS     0x54
 #define CONFIG_SYS_SDRAM_SIZE  4096    /* for fixed parameter use */
 
@@ -190,11 +178,8 @@
  * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
  * @CONFIG_KM_PHRAM: address for /var
  * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
- * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
  */
 
-/* size of rootfs in RAM */
-#define CONFIG_KM_ROOTFSSIZE   0x0
 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
  * is not valid yet, which is the case for when u-boot copies itself to RAM
  */
@@ -242,11 +227,7 @@
 #define CONFIG_SYS_CS0_FTIM3   CONFIG_SYS_NOR_FTIM3
 
 /* More NOR Flash params */
-#define CONFIG_SYS_FLASH_QUIET_TEST
 
-#define CONFIG_SYS_MAX_FLASH_SECT      512     /* sectors per device */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS}
 
 /* NAND Flash on IFC CS1*/
@@ -296,7 +277,6 @@
 
 /* More NAND Flash Params */
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
 
 /* QRIO on IFC CS2 */
 #define CONFIG_SYS_QRIO_BASE           0xfb000000
@@ -332,7 +312,6 @@
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
-#define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xfdd00000      /* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH     0xf
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe03c000
@@ -342,11 +321,8 @@
          CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 #define CONFIG_SYS_INIT_RAM_SIZE               0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
-                                       GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #define CONFIG_SYS_MONITOR_LEN         0xc0000         /* 768k */
 
 /*
@@ -403,12 +379,9 @@ int get_scl(void);
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-
 /* Qman / Bman */
 /* RGMII (FM1@DTESC5) is local managemant interface */
 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x11
-#define CONFIG_ETHPRIME                "fm1-mac5"
 
 /*
  * Hardware Watchdog
@@ -422,7 +395,6 @@ int get_scl(void);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Environment Configuration