Merge branch '2022-08-04-Kconfig-migrations'

[platform/kernel/u-boot.git] / include / configs / ids8313.h

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 48c642b..e89b800 100644 (file)
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -16,9 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_BOOT_RETRY_TIME         900
-#define CONFIG_BOOT_RETRY_MIN          30
-#define CONFIG_RESET_TO_RETRY
 
 #define CONFIG_SYS_SICRH       0x00000000
 #define CONFIG_SYS_SICRL       (SICRL_LBC | SICRL_SPI_D)
@@ -31,10 +28,6 @@
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xFD000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000  /* End of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE \
-                                        - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
@@ -48,7 +41,7 @@
  * Manually set up DDR parameters,
  * as this board has not the SPD connected to I2C.
  */
-#define CONFIG_SYS_DDR_SIZE            256             /* MB */
+#define CONFIG_SYS_SDRAM_SIZE          0x10000000 /* 256 MiB */
 #define CONFIG_SYS_DDR_CONFIG          (CSCONFIG_EN |\
                                         0x00010000 |\
                                         CSCONFIG_ROW_BIT_13 |\
@@ -111,28 +104,16 @@
 /*
  * NOR FLASH setup
  */
-#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_8BIT
 #define CONFIG_FLASH_SHOW_PROGRESS     50
 
 #define CONFIG_SYS_FLASH_BASE          0xFF800000
 #define CONFIG_SYS_FLASH_SIZE          8
 
-
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      128
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT    60000
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500
-
 /*
  * NAND FLASH setup
  */
 #define CONFIG_SYS_NAND_BASE           0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_MAX_CHIPS      1
-#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_NAND_PAGE_SIZE      (2048)
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 << 10)
 #define NAND_CACHE_PAGES               64
 
 
@@ -142,22 +123,14 @@
 #define CONFIG_SYS_MRAM_BASE           0xE2000000
 #define CONFIG_SYS_MRAM_SIZE           0x20000 /* 128 Kb */
 
-#define CONFIG_SYS_OR_TIMING_MRAM
-
-
 /*
  * CPLD setup
  */
 #define CONFIG_SYS_CPLD_BASE           0xE3000000
-#define CONFIG_SYS_CPLD_SIZE           0x8000
-
-#define CONFIG_SYS_OR_TIMING_MRAM
-
 
 /*
  * HW-Watchdog
  */
-#define CONFIG_WATCHDOG                1
 #define CONFIG_SYS_WATCHDOG_VALUE      0xFFFF
 
 /*
@@ -169,7 +142,6 @@
  * Ethernet setup
  */
 #ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME              "TSEC0"
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define TSEC1_PHY_ADDR                 0x1
@@ -178,14 +150,11 @@
 #endif
 
 #ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME              "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET        0x25000
 #define TSEC2_PHY_ADDR                 0x3
 #define TSEC2_FLAGS                    TSEC_GIGABIT
 #define TSEC2_PHYIDX                   0
 #endif
-#define CONFIG_ETHPRIME                "TSEC1"
 
 /*
  * Serial Port
@@ -199,20 +168,16 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR + 0x4600)
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0))
 
-#define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_SYS_SCCR_USBDRCM        3
 
 /*
  * U-Boot environment setup
  */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (8 * 1024 * 1024)
 
 /*
  * Environment Configuration
@@ -221,7 +186,6 @@
 #define CONFIG_NETDEV                  eth1
 #define CONFIG_HOSTNAME                "ids8313"
 #define CONFIG_ROOTPATH                "/opt/eldk-4.2/ppc_6xx"
-#define CONFIG_BOOTFILE                "ids8313/uImage"
 #define CONFIG_UBOOTPATH               "ids8313/u-boot.bin"
 #define CONFIG_FDTFILE                 "ids8313/ids8313.dtb"
 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
@@ -232,17 +196,10 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_LOADS_ECHO
-#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTCOMMAND             "run boot_cramfs"
 #undef CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_DEV               "0"
-
 /* mtdparts command line support */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -273,18 +230,8 @@
                        "${netmask}:${hostname}:${netdev}:off "         \
                        "console=${console},${baudrate} ${othbootargs}\0" \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
        "\0"
 
-#define NFSBOOTCOMMAND                                         \
-       "setenv rootdev /dev/nfs;"                                      \
-       "run setipargs;run addmtd;"                                     \
-       "tftp ${loadaddr} ${bootfile};"                         \
-       "tftp ${fdtaddr} ${fdtfile};"                                   \
-       "fdt addr ${fdtaddr};"                                          \
-       "bootm ${loadaddr} - ${fdtaddr}"
-
 /* UBI Support */
 
 #endif /* __CONFIG_H */