configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

[platform/kernel/u-boot.git] / include / configs / exynos5-common.h

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 3ab8d55..3b73bbc 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -13,21 +13,19 @@
 
 #include "exynos-common.h"
 
-#define CONFIG_SYS_CACHELINE_SIZE      64
 #define CONFIG_EXYNOS_SPL
 
-/* Allow tracing to be enabled */
+#ifdef FTRACE
 #define CONFIG_TRACE
 #define CONFIG_CMD_TRACE
 #define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
 #define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
 #define CONFIG_TRACE_EARLY
 #define CONFIG_TRACE_EARLY_ADDR                0x50000000
-
+#endif
 
 /* Enable ACE acceleration for SHA1 and SHA256 */
 #define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_SHA_HW_ACCEL
 
 /* Power Down Modes */
 #define S5P_CHECK_SLEEP                        0x00000BAD
@@ -41,33 +39,15 @@
 #define INFORM3_OFFSET                 0x80c
 
 /* select serial console configuration */
-#define CONFIG_BAUDRATE                        115200
 #define EXYNOS5_DEFAULT_UART_OFFSET    0x010000
-#define CONFIG_SILENT_CONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
-
-#define CONFIG_CMD_HASH
 
 /* Thermal Management Unit */
 #define CONFIG_EXYNOS_TMU
-#define CONFIG_CMD_DTT
-#define CONFIG_TMU_CMD_DTT
-
-/* TPM */
-#define CONFIG_TPM
-#define CONFIG_CMD_TPM
-#define CONFIG_TPM_TIS_I2C
-#define CONFIG_TPM_TIS_I2C_BUS_NUMBER  3
-#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR  0x20
 
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR    0x02020030
 #define CONFIG_SUPPORT_EMMC_BOOT
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-
 /* specific .lds file */
 #define CONFIG_SPL_LDSCRIPT    "board/samsung/common/exynos-uboot-spl.lds"
 
@@ -118,7 +98,7 @@
 #define CONFIG_BL1_OFFSET      (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
 #define CONFIG_BL2_OFFSET      (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
 
-/* U-boot copy size from boot Media to DRAM.*/
+/* U-Boot copy size from boot Media to DRAM.*/
 #define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
 
@@ -126,27 +106,14 @@
 #define SPI_FLASH_UBOOT_POS    (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 /* I2C */
-
-/* TODO(sjg@chromium.org): Move these two options to Kconfig */
-#define CONFIG_DM_I2C
-#define CONFIG_DM_I2C_COMPAT
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
-#define CONFIG_I2C_EDID
 
 /* SPI */
 #ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED                50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS    5
-#define CONFIG_OF_SPI
 #endif
 
 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
@@ -164,26 +131,13 @@
 #define CONFIG_ENV_SROM_BANK           1
 #endif /*CONFIG_CMD_NET*/
 
-/* SHA hashing */
-#define CONFIG_CMD_HASH
-#define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
-
 /* Enable Time Command */
-#define CONFIG_CMD_TIME
-
-#define CONFIG_CMD_GPIO
 
 /* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_RTL8152
 
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
@@ -191,11 +145,6 @@
 #define EXYNOS_USB_SECONDARY_BOOT      0xfeed0002
 #define EXYNOS_IRAM_SECONDARY_BASE     0x02020018
 
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
-
-
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \