Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig

[platform/kernel/u-boot.git] / include / configs / dragonboard410c.h

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index 3c5bb8a..26a714c 100644 (file)
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Board configuration file for Dragonboard 410C
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIGS_DRAGONBOARD410C_H
@@ -12,45 +11,17 @@
 #include <linux/sizes.h>
 #include <asm/arch/sysmap-apq8016.h>
 
-#define CONFIG_MISC_INIT_R /* To stop autoboot */
+/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM_1                   0x80000000
-/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
-#define PHYS_SDRAM_1_SIZE              0x3da00000
+/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
+#define PHYS_SDRAM_1_SIZE              SZ_1G
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_TEXT_BASE           0x80080000
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x80000)
 #define CONFIG_SYS_BOOTM_LEN           SZ_64M
 
 /* UART */
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY              19000000
-
-#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
-
-/* Fixup - in init code we switch from device to host mode,
- * it has to be done after each HCD reset */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-/* Support all possible USB ethernet dongles */
-
-/* Extra Commands */
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-
-/* Partition table support */
-#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
-
-#include <config_distro_defaults.h>
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 1) \
@@ -88,26 +59,14 @@ REFLASH(dragonboard/u-boot.img, 8)\
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "reflash="CONFIG_ENV_REFLASH"\0"\
        "loadaddr=0x81000000\0" \
-       "fdt_high=0xffffffffffffffff\0" \
        "initrd_high=0xffffffffffffffff\0" \
        "linux_image=Image\0" \
        "kernel_addr_r=0x81000000\0"\
-       "fdtfile=apq8016-sbc.dtb\0" \
+       "fdtfile=qcom/apq8016-sbc.dtb\0" \
        "fdt_addr_r=0x83000000\0"\
        "ramdisk_addr_r=0x84000000\0"\
        "scriptaddr=0x90000000\0"\
        "pxefile_addr_r=0x90100000\0"\
        BOOTENV
 
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_SYS_MMC_ENV_DEV         0       /* mmc0 = emmc, mmc1 = sd */
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_8M)
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS             64      /* max command args */
-
 #endif