Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig

[platform/kernel/u-boot.git] / include / configs / devkit3250.h

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index c2340b2..e5639fb 100644 (file)
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -18,9 +18,6 @@
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_64M
 
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + SZ_4K \
-                                        - GENERATED_GBL_DATA_SIZE)
-
 /*
  * DMA
  */
@@ -28,20 +25,10 @@
 /*
  * GPIO
  */
-#define CONFIG_LPC32XX_GPIO
-
-/*
- * Ethernet
- */
-#define CONFIG_RMII
-#define CONFIG_LPC32XX_ETH
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
 /*
  * NOR Flash
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      71
 #define CONFIG_SYS_FLASH_BASE          EMC_CS0_BASE
 #define CONFIG_SYS_FLASH_SIZE          SZ_4M
 
@@ -49,7 +36,6 @@
  * NAND controller
  */
 #define CONFIG_SYS_NAND_BASE           SLC_NAND_BASE
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 
 /*
@@ -64,20 +50,14 @@
 #define CONFIG_LPC32XX_NAND_SLC_RHOLD          200000000
 #define CONFIG_LPC32XX_NAND_SLC_RSETUP         50000000
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE             0x20000
-#define CONFIG_SYS_NAND_PAGE_SIZE              NAND_LARGE_BLOCK_PAGE_SIZE
-
 /*
  * USB
  */
-#define CONFIG_USB_OHCI_LPC32XX
 #define CONFIG_USB_ISP1301_I2C_ADDR            0x2d
 
 /*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 /*
  * Pass open firmware flat tree
@@ -87,16 +67,7 @@
  * Environment
  */
 
-#define CONFIG_BOOTCOMMAND                     \
-       "dhcp; "                                \
-       "tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; "         \
-       "tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; "       \
-       "setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; "     \
-       "setenv bootargs ${bootargs} ${nfsargs} ${userargs}; "                  \
-       "bootm ${loadaddr} - ${dtbaddr}"
-
 #define CONFIG_EXTRA_ENV_SETTINGS              \
-       "autoload=no\0"                         \
        "ethaddr=00:01:90:00:C0:81\0"           \
        "dtbaddr=0x81000000\0"                  \
        "nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0"  \
@@ -107,34 +78,11 @@
  * U-Boot Commands
  */
 
-#define CONFIG_BOOTFILE                        "uImage"
-
-/*
- * SPL specific defines
- */
-/* SPL will be executed at offset 0 */
-
-/* SPL will use SRAM as stack */
-#define CONFIG_SPL_STACK               0x0000FFF8
-
-/* Use the framework and generic lib */
-
-/* SPL will use serial */
-
-/* SPL loads an image from NAND */
-#define CONFIG_SPL_NAND_RAW_ONLY
-
-#define CONFIG_SPL_NAND_SOFTECC
-
-#define CONFIG_SPL_MAX_SIZE            0x20000
-#define CONFIG_SPL_PAD_TO              CONFIG_SPL_MAX_SIZE
-
-/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
+/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_TEXT_BASE */
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x60000
 
-#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_TEXT_BASE
 
 /* See common/spl/spl.c  spl_set_header_raw_uboot() */
 #define CONFIG_SYS_MONITOR_LEN         CONFIG_SYS_NAND_U_BOOT_SIZE