Convert CONFIG_SPL_NAND_LOAD et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / cm_t43.h

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index bd40989..feeb705 100644 (file)
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -8,8 +8,6 @@
 #ifndef __CONFIG_CM_T43_H
 #define __CONFIG_CM_T43_H
 
-#define CONFIG_CM_T43
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_MAX_RAM_BANK_SIZE       (2048 << 20)    /* 2GB */
 #define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
 
@@ -26,9 +24,6 @@
 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
@@ -44,18 +39,9 @@
                                         50, 51, 52, 53, 54, 55, 56, 57, }
 
 /* CPSW Ethernet support */
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_PHY_ATHEROS
 #define CONFIG_SYS_RX_ETH_BUFFER       64
 
-/* USB support */
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_AM437X_USB2PHY2_HOST
-
 /* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_TPS65218
 
 /* Enabling L2 Cache */
@@ -66,23 +52,15 @@
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
 
 #define CONFIG_HSMMC2_8BIT
 
 #include <configs/ti_armv7_omap.h>
 #undef CONFIG_SYS_MONITOR_LEN
 
-#define CONFIG_ENV_SIZE                        (16 * 1024)
-
 #define V_OSCK                         24000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_ENV_SECT_SIZE           (64 * 1024)
-#define CONFIG_ENV_OFFSET              (768 * 1024)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
        "fdtaddr=0x81200000\0" \
@@ -120,14 +98,8 @@
 
 /* SPL defines. */
 #define CONFIG_SYS_SPL_ARGS_ADDR       (CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     (256 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
-#define CONFIG_SYS_EEPROM_SIZE                 256
 
 #endif /* __CONFIG_CM_T43_H */