Merge branch '2022-08-04-Kconfig-migrations'

[platform/kernel/u-boot.git] / include / configs / cm_t335.h

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 4ca4f35..84b4271 100644 (file)
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -10,8 +10,6 @@
 #ifndef __CONFIG_CM_T335_H
 #define __CONFIG_CM_T335_H
 
-#define CONFIG_CM_T335
-
 #include <configs/ti_am335x_common.h>
 
 #undef CONFIG_MAX_RAM_BANK_SIZE
@@ -21,7 +19,6 @@
 #define V_OSCK                         25000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#ifndef CONFIG_SPL_BUILD
 #define MMCARGS \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
@@ -34,8 +31,6 @@
                "bootm ${loadaddr}\0"
 
 #define NANDARGS \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "nandroot=ubi0:rootfs rw\0" \
        "nandrootfstype=ubifs\0" \
        "nandargs=setenv bootargs console=${console} " \
@@ -58,22 +53,6 @@
        MMCARGS \
        NANDARGS
 
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "if run loadbootscript; then " \
-                       "run bootscript; " \
-               "else " \
-                       "if run loaduimage; then " \
-                               "run mmcboot; " \
-                       "else run nandboot; " \
-                       "fi; " \
-               "fi; " \
-       "else run nandboot; fi"
-#endif /* CONFIG_SPL_BUILD */
-
-#define CONFIG_TIMESTAMP
-#define CONFIG_SYS_AUTOLOAD            "no"
-
 /* Serial console configuration */
 
 /* NS16550 Configuration */
@@ -87,13 +66,6 @@
 /* Network. */
 
 /* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -107,15 +79,6 @@
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000
-
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x500000
-#endif
-
 /* GPIO pin + bank to pin ID mapping */
 #define GPIO_PIN(_bank, _pin)          ((_bank << 5) + _pin)
 
@@ -124,7 +87,6 @@
 
 /* EEPROM */
 
-#ifndef CONFIG_SPL_BUILD
 /*
  * Enable PCA9555 at I2C0-0x26.
  * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
@@ -132,7 +94,5 @@
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR    0x26
 #define CONFIG_SYS_I2C_PCA953X_WIDTH   { {0x26, 16} }
-#endif /* CONFIG_SPL_BUILD */
 
 #endif /* __CONFIG_CM_T335_H */
-