configs: remove CONFIG_NET_MULTI

[platform/kernel/u-boot.git] / include / configs / bur_am335x_common.h

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 3f889f8..99c142a 100644 (file)
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -3,7 +3,7 @@
  *
  * common parts used by B&R AM335x based boards
  *
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
  *
  * SPDX-License-Identifier:        GPL-2.0+
@@ -12,6 +12,26 @@
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \
+"defaultip=192.168.60.253\0" \
+"defaultsip=192.168.60.254\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then " \
+"setenv ncip ${serverip}; else " \
+"setenv ncip 192.168.60.254; " \
+"setenv serverip 192.168.60.254; " \
+"setenv gatewayip 192.168.60.254; " \
+"setenv ipaddr 192.168.60.1; " \
+"fi;" \
+"setenv netdisplay0 '" \
+"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \
+"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip};" \
+"run netdisplay0; " \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
+#define CONFIG_CMD_TIME
+
 #define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_AM33XX
@@ -41,13 +61,12 @@
 #define CONFIG_BAUDRATE                        115200
 
 /* Network defines */
-#define CONFIG_CMD_NET                 /* 'bootp' and 'tftp' */
 #define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_DNS               /* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT         4
+#define CONFIG_NET_RETRY_COUNT         2
 #define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
 #define CONFIG_MII                     /* Required in net/eth.c */
@@ -57,7 +76,9 @@
 #define CONFIG_SPL_NET_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT         /* used for a fetching MAC-Address */
 #define CONFIG_SPL_NET_VCI_STRING      "AM335x U-Boot SPL"
-
+/* Network console */
+#define CONFIG_NETCONSOLE                      1
+#define CONFIG_BOOTP_MAY_FAIL          /* if we don't have DHCP environment */
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -110,11 +131,13 @@
  * we are on so we do not need to rely on the command prompt.  We set a
  * console baudrate of 115200 and use the default baud rate table.
  */
-#define CONFIG_SYS_MALLOC_LEN          (1024 << 10)
+#define CONFIG_SYS_MALLOC_LEN          (5120 << 10)
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT              "U-Boot (BuR V2.0)# "
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_ENV_OVERWRITE           /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 
 /* As stated above, the following choices are optional. */
 #define CONFIG_SYS_LONGHELP
@@ -151,7 +174,6 @@
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SETGETDCR
 #undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_CRC32
 /* define command we need always */
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_SOURCE
@@ -176,7 +198,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
 #undef  CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE           0x80800000
 #define CONFIG_SPL_BSS_START_ADDR      0x80A00000