#include <linux/sizes.h>
#include <configs/ti_am335x_common.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-/* Custom script for NOR */
-#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds"
-
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE (128 << 10)
-
/* FIT support */
#define CONFIG_SYS_BOOTM_LEN SZ_64M
-/* UBI Support */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-
-/* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
+#ifdef CONFIG_MTD_RAW_NAND
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#endif
#define NANDARGS \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
#define NANDARGS ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
/* PMIC support */
#define CONFIG_POWER_TPS65910
/* SPL */
#ifndef CONFIG_NOR_BOOT
-/* Bootcount using the RTC block */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
-
-/* USB gadget RNDIS */
-/* General network SPL, both CPSW and USB gadget RNDIS */
-#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
-
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
- CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#endif
#endif
* add mass storage support and for gadget we add both RNDIS ethernet
* and DFU.
*/
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_USB_MUSB_PIO_ONLY
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
-/* disable host part of MUSB in SPL */
-/* disable EFI partitions and partition UUID support */
-/*
- * Disable CPSW SPL support so we fit within the 101KiB limit.
- */
-#endif
-
-/* Network. */
-#define CONFIG_PHY_ADDR 0
-#define CONFIG_PHY_SMSC
-#define CONFIG_MII
-#define CONFIG_PHY_ATHEROS
-
/* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
-#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
- "128k(SPL.backup1)," \
- "128k(SPL.backup2)," \
- "128k(SPL.backup3)," \
- "1920k(u-boot)," \
- "-(UBI)"
-#endif
#endif
#endif /* ! __CONFIG_BALTOS_H */
projects / platform / kernel / u-boot.git / blobdiff