Merge branch '2022-08-04-Kconfig-migrations'

[platform/kernel/u-boot.git] / include / configs / at91sam9263ek.h

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index e7fca46..8c6d1cd 100644 (file)
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -22,46 +22,26 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
-#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#else
-#define CONFIG_SYS_USE_NORFLASH
-#endif
-
 /*
  * Hardware drivers
  */
-#define CONFIG_ATMEL_LEGACY
 
 /* LCD */
 #define LCD_BPP                                LCD_COLOR8
-#define CONFIG_LCD_LOGO                        1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO                        1
-#define CONFIG_LCD_INFO_BELOW_LOGO     1
-#define CONFIG_ATMEL_LCD               1
-#define CONFIG_ATMEL_LCD_BGR555                1
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE      1
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       (16 * 1024)
+#define CONFIG_SYS_INIT_RAM_ADDR       ATMEL_BASE_SRAM1
 
 /* NOR flash, if populated */
 #ifdef CONFIG_SYS_USE_NORFLASH
 #define PHYS_FLASH_1                           0x10000000
 #define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT              256
-#define CONFIG_SYS_MAX_FLASH_BANKS             1
 
 #define CONFIG_SYS_MONITOR_SEC 1:0-3
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN (256 << 10)
 
 /* Address and size of Primary Environment Sector */
@@ -191,30 +171,7 @@
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PA22
 #endif
 
-/* Ethernet */
-#define CONFIG_RESET_PHY_R             1
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW            1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00a00000      /* AT91SAM9263_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
-#endif
 
 #endif