MPC5xxx: Change names of defines related to IPB and PCI clocks.

[platform/kernel/u-boot.git] / include / configs / aev.h

diff --git a/include/configs/aev.h b/include/configs/aev.h
index ca6e52b..6c2a360 100644 (file)
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004-2005
@@ -142,22 +142,22 @@
        "rootpath=/opt/eldk/ppc_6xx\0"                                  \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=$(serverip):$(rootpath) "                      \
-               "console=ttyS0,$(baudrate)\0"                           \
-       "addip=setenv bootargs $(bootargs) "                            \
-               "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
-               ":$(hostname):$(netdev):off panic=1\0"                  \
+               "nfsroot=${serverip}:${rootpath} "                      \
+               "console=ttyS0,${baudrate}\0"                           \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
        "flash_self=run ramargs addip;"                                 \
-               "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip;"                                  \
-               "bootm $(kernel_addr)\0"                                \
-       "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"     \
+               "bootm ${kernel_addr}\0"                                \
+       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
        "bootfile=/tftpboot/tqm5200/uImage\0"                           \
-       "load=tftp 200000 $(u-boot)\0"                                  \
+       "load=tftp 200000 ${u-boot}\0"                                  \
        "u-boot=/tftpboot/tqm5200/u-boot.bin\0"                         \
        "update=protect off FC000000 FC05FFFF;"                         \
                "erase FC000000 FC05FFFF;"                              \
-               "cp.b 200000 FC000000 $(filesize);"                     \
+               "cp.b 200000 FC000000 ${filesize};"                     \
                "protect on FC000000 FC05FFFF\0"                        \
        ""
 
@@ -166,17 +166,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK               /* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock 
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66                        /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2  /* define for 66MHz speed */
 #endif
 
 /*
@@ -362,7 +362,7 @@
 
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG         0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG         0x0004DF30 /* for pci_clk = 33 MHz */
@@ -370,10 +370,7 @@
 #define CFG_CS0_START          CFG_FLASH_BASE
 #define CFG_CS0_SIZE           CFG_FLASH_SIZE
 
-/* automatic configuration of chip selects */
-#ifdef CONFIG_CS_AUTOCONF
 #define CONFIG_LAST_STAGE_INIT
-#endif
 
 /*
  * SRAM - Do not map below 2 GB in address space, because this area is used