Convert CONFIG_SPL_NAND_LOAD et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / T208xQDS.h

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 714bc3c..aa525dd 100644 (file)
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -29,8 +29,6 @@
 #define CONFIG_SYS_NUM_CPC     CONFIG_SYS_NUM_DDR_CTLRS
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
-
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
@@ -47,9 +45,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -62,9 +57,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
-#endif
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -76,9 +68,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
-#endif
 #endif
 
 #endif /* CONFIG_RAMBOOT_PBL */
@@ -101,9 +90,7 @@
  */
 #define CONFIG_SYS_CACHE_STASHING
 #define CONFIG_BTB             /* toggle branch predition */
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
@@ -139,7 +126,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_DIMM_SLOTS_PER_CTLR     2
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define CONFIG_SYS_SDRAM_SIZE  2048    /* for fixed parameter use */
 #define SPD_EEPROM_ADDRESS1    0x51
@@ -266,7 +252,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
@@ -347,7 +332,6 @@ unsigned long get_board_sys_clk(void);
                                                GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 #define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
 
 /*
  * Serial Port
@@ -515,8 +499,6 @@ unsigned long get_board_sys_clk(void);
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR        (512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR        (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -591,7 +573,6 @@ unsigned long get_board_sys_clk(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000 /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -601,11 +582,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
@@ -613,8 +589,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_BOOTFILE         "uImage"
 #define CONFIG_UBOOTPATH "u-boot.bin"  /* U-Boot image on TFTP server */
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR                1000000
 #define __USB_PHY_TYPE         utmi
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \