Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

[platform/kernel/u-boot.git] / include / configs / MPC837XERDB.h

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 2b7d629..d69d25e 100644 (file)
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -34,6 +34,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
+#define CONFIG_HWCONFIG
 
 /*
  * On-board devices
@@ -48,8 +49,7 @@
 #define CONFIG_83XX_PCICLK     66666667 /* in HZ */
 #else
 #define CONFIG_83XX_CLKIN      66666667 /* in Hz */
-#define CONFIG_83XX_GENERIC_PCI        1
-#define CONFIG_83XX_GENERIC_PCIE       1
+#define CONFIG_PCIE
 #endif
 
 #ifndef CONFIG_SYS_CLK_FREQ
@@ -190,8 +190,8 @@
                                /* 0x3937d322 */
 #define CONFIG_SYS_DDR_TIMING_2        0x02984cc8
 
-#define CONFIG_SYS_DDR_INTERVAL        ((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \
-                               | (256 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
+#define CONFIG_SYS_DDR_INTERVAL        ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \
+                               | (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
                                /* 0x06090100 */
 
 #if defined(CONFIG_DDR_2T_TIMING)
@@ -205,7 +205,7 @@
                                /* 0x43000000 */
 #endif
 #define CONFIG_SYS_DDR_SDRAM_CFG2      0x00001000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE            ((0x0440 << SDRAM_MODE_ESD_SHIFT) \
+#define CONFIG_SYS_DDR_MODE            ((0x0406 << SDRAM_MODE_ESD_SHIFT) \
                                | (0x0442 << SDRAM_MODE_SD_SHIFT))
                                /* 0x04400442 */ /* DDR400 */
 #define CONFIG_SYS_DDR_MODE2           0x00000000
@@ -220,7 +220,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -228,7 +228,7 @@
 #undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN         (384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN          (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -243,8 +243,10 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
 #define CONFIG_SYS_LBC_LBCR            0x00000000
+#define CONFIG_FSL_ELBC                1
 
 /*
  * FLASH on the Local Bus
@@ -314,7 +316,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -507,9 +508,22 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -530,16 +544,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                HID2_HBE
 
 /*
@@ -630,20 +645,8 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#ifdef CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR         00:04:9f:ef:04:01
-#endif
-
-#ifdef CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR                00:04:9f:ef:04:02
-#endif
-
 #define CONFIG_HAS_FSL_DR_USB
 
-#define CONFIG_IPADDR          10.0.0.2
-#define CONFIG_SERVERIP                10.0.0.1
-#define CONFIG_GATEWAYIP       10.0.0.1
-#define CONFIG_NETMASK         255.0.0.0
 #define CONFIG_NETDEV          eth1
 
 #define CONFIG_HOSTNAME                mpc837x_rdb
@@ -653,7 +656,7 @@
 #define CONFIG_UBOOTPATH       u-boot.bin      /* U-Boot image on TFTP server */
 #define CONFIG_FDTFILE         mpc8379_rdb.dtb
 
-#define CONFIG_LOADADDR                500000  /* default location for tftp and bootm */
+#define CONFIG_LOADADDR                800000  /* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #define CONFIG_BAUDRATE                115200
 
@@ -664,12 +667,12 @@
        "netdev=" MK_STR(CONFIG_NETDEV) "\0"                            \
        "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
        "tftpflash=tftp $loadaddr $uboot;"                              \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
-       "fdtaddr=400000\0"                                              \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
+       "fdtaddr=780000\0"                                              \
        "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"                          \
        "ramdiskaddr=1000000\0"                                         \
        "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0"                  \