Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

[platform/kernel/u-boot.git] / include / configs / MPC8349ITX.h

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 52e2851..3659d88 100644 (file)
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -56,13 +56,14 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if (TEXT_BASE == 0xFE000000)
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)
 #define CONFIG_SYS_LOWBOOT
 #endif
 
 /*
  * High Level Configuration Options
  */
+#define CONFIG_MPC83xx         1
 #define CONFIG_MPC834x         /* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349         /* MPC8349 specific */
 
@@ -291,7 +292,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * U-Boot memory configuration
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -328,7 +329,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -511,7 +511,8 @@ boards, we say we have two, but don't display a message if we find only one. */
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
+#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_HUSH_PARSER                 /* Use the HUSH parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
@@ -537,10 +538,10 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_HRCW_LOW (\
        HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -595,8 +596,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_SICRH SICRH_TSOBI1  /* Needed for gigabit to work on TSEC 1 */
 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)    /* USB DR as device + USB MPH as host */
 
-#define CONFIG_SYS_HID0_INIT   0x000000000
-#define CONFIG_SYS_HID0_FINAL  CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID0_INIT   0x00000000
+#define CONFIG_SYS_HID0_FINAL  HID0_ENABLE_INSTRUCTION_CACHE
 
 #define CONFIG_SYS_HID2        HID2_HBE
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
@@ -715,11 +716,11 @@ boards, we say we have two, but don't display a message if we find only one. */
        "netdev=" MK_STR(CONFIG_NETDEV) "\0"                            \
        "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
        "fdtaddr=780000\0"                                              \
        "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"