#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SPI
# define MCFFEC_TOUT_LOOP 50000
# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
-# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
+# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
# define CONFIG_ETHPRIME "FEC0"
# define CONFIG_IPADDR 192.162.1.2
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
/* DSPI and Serial Flash */
+#define CONFIG_CF_SPI
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
#define CONFIG_HARD_SPI
-#define CONFIG_SYS_SER_FLASH_BASE 0x01000000
#define CONFIG_SYS_SBFHDR_SIZE 0x7
#ifdef CONFIG_CMD_SPI
# define CONFIG_SPI_FLASH
# define CONFIG_SPI_FLASH_STMICRO
-# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \
- DSPI_DCTAR_CPOL | \
- DSPI_DCTAR_CPHA | \
- DSPI_DCTAR_PCSSCK_1CLK | \
- DSPI_DCTAR_PASC(0) | \
- DSPI_DCTAR_PDT(0) | \
- DSPI_DCTAR_CSSCK(0) | \
- DSPI_DCTAR_ASC(0) | \
- DSPI_DCTAR_PBR(0) | \
- DSPI_DCTAR_DT(1) | \
- DSPI_DCTAR_BR(1))
+# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
+ DSPI_CTAR_PCSSCK_1CLK | \
+ DSPI_CTAR_PASC(0) | \
+ DSPI_CTAR_PDT(0) | \
+ DSPI_CTAR_CSSCK(0) | \
+ DSPI_CTAR_ASC(0) | \
+ DSPI_CTAR_DT(1))
+# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
+# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
-#define CONFIG_PRAM 2048 /* 2048 KB */
+#define CONFIG_PRAM 2048 /* 2048 KB */
#define CONFIG_SYS_PROMPT "-> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_MBAR 0xFC000000
+#define CONFIG_SYS_MBAR 0xFC000000
/*
* Low Level Configuration Settings
#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
#ifdef CONFIG_CF_SBF
-# define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
#else
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SYS_STMICRO_BOOT)
# define CONFIG_ENV_IS_IN_SPI_FLASH 1
# define CONFIG_ENV_SPI_CS 1
# define CONFIG_ENV_OFFSET 0x20000
# define CONFIG_ENV_SECT_SIZE 0x10000
#else
# define CONFIG_ENV_IS_IN_FLASH 1
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
-# define CONFIG_ENV_SECT_SIZE 0x2000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000)
+# define CONFIG_ENV_SIZE 0x2000
+# define CONFIG_ENV_SECT_SIZE 0x8000
#endif
#undef CONFIG_ENV_OVERWRITE
-#undef CONFIG_ENV_IS_EMBEDDED
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_STMICRO_BOOT
-# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE
-# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE
-# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
-# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_SER_FLASH_BASE
-#endif
+/* FLASH organization */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
#define CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI
# define CONFIG_FLASH_CFI_DRIVER 1
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
* This is setting for JFFS2 support in u-boot.
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
-#ifdef CONFIG_SYS_SPANSION_BOOT
-# define CONFIG_JFFS2_DEV "nor0"
-# define CONFIG_JFFS2_PART_SIZE 0x01000000
-# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
-#endif
-#ifdef CONFIG_SYS_STMICRO_BOOT
+#ifdef CONFIG_CMD_JFFS2
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
#endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
+/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \
+ CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
+ CF_CACR_DEC | CF_CACR_DDCM_P | \
+ CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
/*
- * CS0 - NOR Flash 8MB
+ * CS0 - NOR Flash 16MB
* CS1 - Available
* CS2 - Available
* CS3 - Available
* CS5 - Available
*/
- /* SPANSION Flash */
+ /* Flash */
#define CONFIG_SYS_CS0_BASE 0x00000000
-#define CONFIG_SYS_CS0_MASK 0x007F0001
-#define CONFIG_SYS_CS0_CTRL 0x00001180
+#define CONFIG_SYS_CS0_MASK 0x00FF0001
+#define CONFIG_SYS_CS0_CTRL 0x00004D80
#define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE
projects / platform / kernel / u-boot.git / blobdiff