*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
+ * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
*/
* @GST_SEEK_FLAG_KEY_UNIT: seek to the nearest keyframe. This might be
* faster but less accurate.
* @GST_SEEK_FLAG_SEGMENT: perform a segment seek.
- * @GST_SEEK_FLAG_SKIP: when doing fast foward or fast reverse playback, allow
+ * @GST_SEEK_FLAG_TRICKMODE: when doing fast forward or fast reverse playback, allow
* elements to skip frames instead of generating all
- * frames. Since 0.10.22.
+ * frames. (Since: 1.6)
+ * @GST_SEEK_FLAG_SNAP_BEFORE: go to a location before the requested position,
+ * if %GST_SEEK_FLAG_KEY_UNIT this means the keyframe at or before
+ * the requested position the one at or before the seek target.
+ * @GST_SEEK_FLAG_SNAP_AFTER: go to a location after the requested position,
+ * if %GST_SEEK_FLAG_KEY_UNIT this means the keyframe at of after the
+ * requested position.
+ * @GST_SEEK_FLAG_SNAP_NEAREST: go to a position near the requested position,
+ * if %GST_SEEK_FLAG_KEY_UNIT this means the keyframe closest
+ * to the requested position, if both keyframes are at an equal
+ * distance, behaves like %GST_SEEK_FLAG_SNAP_BEFORE.
+ * @GST_SEEK_FLAG_TRICKMODE_KEY_UNITS: when doing fast forward or fast reverse
+ * playback, request that elements only decode keyframes
+ * and skip all other content, for formats that have
+ * keyframes. (Since: 1.6)
+ * @GST_SEEK_FLAG_TRICKMODE_NO_AUDIO: when doing fast forward or fast reverse
+ * playback, request that audio decoder elements skip
+ * decoding and output only gap events or silence. (Since: 1.6)
+ * @GST_SEEK_FLAG_SKIP: Deprecated backward compatibility flag, replaced
+ * by %GST_SEEK_FLAG_TRICKMODE
*
* Flags to be used with gst_element_seek() or gst_event_new_seek(). All flags
* can be used together.
* complete scan of the file in those cases.
*
* When performing a segment seek: after the playback of the segment completes,
- * no EOS will be emmited by the element that performed the seek, but a
- * #GST_MESSAGE_SEGMENT_DONE message will be posted on the bus by the element.
+ * no EOS will be emitted by the element that performed the seek, but a
+ * %GST_MESSAGE_SEGMENT_DONE message will be posted on the bus by the element.
* When this message is posted, it is possible to send a new seek event to
* continue playback. With this seek method it is possible to perform seamless
* looping or simple linear editing.
*
* When doing fast forward (rate > 1.0) or fast reverse (rate < -1.0) trickmode
- * playback, the @GST_SEEK_FLAG_SKIP flag can be used to instruct decoders
+ * playback, the %GST_SEEK_FLAG_TRICKMODE flag can be used to instruct decoders
* and demuxers to adjust the playback rate by skipping frames. This can improve
* performance and decrease CPU usage because not all frames need to be decoded.
*
+ * Beyond that, the %GST_SEEK_FLAG_TRICKMODE_KEY_UNITS flag can be used to
+ * request that decoders skip all frames except key units, and
+ * %GST_SEEK_FLAG_TRICKMODE_NO_AUDIO flags can be used to request that audio
+ * decoders do no decoding at all, and simple output silence.
+ *
+ * The %GST_SEEK_FLAG_SNAP_BEFORE flag can be used to snap to the previous
+ * relevant location, and the %GST_SEEK_FLAG_SNAP_AFTER flag can be used to
+ * select the next relevant location. If %GST_SEEK_FLAG_KEY_UNIT is specified,
+ * the relevant location is a keyframe. If both flags are specified, the nearest
+ * of these locations will be selected. If none are specified, the implementation is
+ * free to select whichever it wants.
+ *
+ * The before and after here are in running time, so when playing backwards,
+ * the next location refers to the one that will played in next, and not the
+ * one that is located after in the actual source stream.
+ *
* Also see part-seeking.txt in the GStreamer design documentation for more
* details on the meaning of these flags and the behaviour expected of
* elements that handle them.
GST_SEEK_FLAG_ACCURATE = (1 << 1),
GST_SEEK_FLAG_KEY_UNIT = (1 << 2),
GST_SEEK_FLAG_SEGMENT = (1 << 3),
- GST_SEEK_FLAG_SKIP = (1 << 4)
+ GST_SEEK_FLAG_TRICKMODE = (1 << 4),
+ /* FIXME 2.0: Remove _SKIP flag,
+ * which was kept for backward compat when _TRICKMODE was added */
+ GST_SEEK_FLAG_SKIP = (1 << 4),
+ GST_SEEK_FLAG_SNAP_BEFORE = (1 << 5),
+ GST_SEEK_FLAG_SNAP_AFTER = (1 << 6),
+ GST_SEEK_FLAG_SNAP_NEAREST = GST_SEEK_FLAG_SNAP_BEFORE | GST_SEEK_FLAG_SNAP_AFTER,
+ /* Careful to restart next flag with 1<<7 here */
+ GST_SEEK_FLAG_TRICKMODE_KEY_UNITS = (1 << 7),
+ GST_SEEK_FLAG_TRICKMODE_NO_AUDIO = (1 << 8),
} GstSeekFlags;
/**
* @GST_SEGMENT_FLAG_NONE: no flags
* @GST_SEGMENT_FLAG_RESET: reset the pipeline running_time to the segment
* running_time
- * @GST_SEGMENT_FLAG_SKIP: perform skip playback
+ * @GST_SEGMENT_FLAG_TRICKMODE: perform skip playback (Since: 1.6)
+ * @GST_SEGMENT_FLAG_SEGMENT: send SEGMENT_DONE instead of EOS
+ * @GST_SEGMENT_FLAG_TRICKMODE_KEY_UNITS: Decode only keyframes, where
+ * possible (Since: 1.6)
+ * @GST_SEGMENT_FLAG_TRICKMODE_NO_AUDIO: Do not decode any audio, where
+ * possible (Since: 1.6)
+ * @GST_SEGMENT_FLAG_SKIP: Deprecated backward compatibility flag, replaced
+ * by @GST_SEGMENT_FLAG_TRICKMODE
*
* Flags for the GstSegment structure. Currently mapped to the corresponding
* values of the seek flags.
*/
-typedef enum {
+/* Note: update gst_segment_do_seek() when adding new flags here */
+typedef enum { /*< flags >*/
GST_SEGMENT_FLAG_NONE = GST_SEEK_FLAG_NONE,
GST_SEGMENT_FLAG_RESET = GST_SEEK_FLAG_FLUSH,
- GST_SEGMENT_FLAG_SKIP = GST_SEEK_FLAG_SKIP
+ GST_SEGMENT_FLAG_TRICKMODE = GST_SEEK_FLAG_TRICKMODE,
+ /* FIXME 2.0: Remove _SKIP flag,
+ * which was kept for backward compat when _TRICKMODE was added */
+ GST_SEGMENT_FLAG_SKIP = GST_SEEK_FLAG_TRICKMODE,
+ GST_SEGMENT_FLAG_SEGMENT = GST_SEEK_FLAG_SEGMENT,
+ GST_SEGMENT_FLAG_TRICKMODE_KEY_UNITS = GST_SEEK_FLAG_TRICKMODE_KEY_UNITS,
+ GST_SEGMENT_FLAG_TRICKMODE_NO_AUDIO = GST_SEEK_FLAG_TRICKMODE_NO_AUDIO
} GstSegmentFlags;
/**
* GstSegment:
* @flags: flags for this segment
- * @rate: the rate of the segment
+ * @rate: the playback rate of the segment
* @applied_rate: the already applied rate to the segment
* @format: the format of the segment values
- * @base: the base time of the segment
- * @start: the start of the segment
- * @stop: the stop of the segment
- * @time: the stream time of the segment
- * @position: the position in the segment
- * @duration: the duration of the segment
+ * @base: the running time (plus elapsed time, see offset) of the segment start
+ * @offset: the amount (in buffer timestamps) that has already been elapsed in
+ * the segment
+ * @start: the start of the segment in buffer timestamp time (PTS)
+ * @stop: the stop of the segment in buffer timestamp time (PTS)
+ * @time: the stream time of the segment start
+ * @position: the buffer timestamp position in the segment (used internally by
+ * elements such as sources, demuxers or parsers to track progress)
+ * @duration: the duration of the stream
*
* A helper structure that holds the configured region of
* interest in a media file.
GstFormat format;
guint64 base;
+ guint64 offset;
guint64 start;
guint64 stop;
guint64 time;
guint64 position;
guint64 duration;
+
+ /* < private > */
+ gpointer _gst_reserved[GST_PADDING];
};
+GST_API
GType gst_segment_get_type (void);
+GST_API
GstSegment * gst_segment_new (void) G_GNUC_MALLOC;
+
+GST_API
GstSegment * gst_segment_copy (const GstSegment *segment) G_GNUC_MALLOC;
+
+GST_API
void gst_segment_copy_into (const GstSegment *src, GstSegment *dest);
+
+GST_API
void gst_segment_free (GstSegment *segment);
+GST_API
void gst_segment_init (GstSegment *segment, GstFormat format);
+GST_API
+gint gst_segment_to_stream_time_full (const GstSegment *segment, GstFormat format, guint64 position, guint64 * stream_time);
+
+GST_API
guint64 gst_segment_to_stream_time (const GstSegment *segment, GstFormat format, guint64 position);
+
+GST_API
+gint gst_segment_position_from_stream_time_full (const GstSegment * segment, GstFormat format, guint64 stream_time, guint64 * position);
+
+GST_API
+guint64 gst_segment_position_from_stream_time (const GstSegment * segment, GstFormat format, guint64 stream_time);
+
+GST_API
guint64 gst_segment_to_running_time (const GstSegment *segment, GstFormat format, guint64 position);
+
+GST_API
+gint gst_segment_to_running_time_full (const GstSegment *segment, GstFormat format, guint64 position,
+ guint64 * running_time);
+
+GST_DEPRECATED_FOR(gst_segment_position_from_running_time)
guint64 gst_segment_to_position (const GstSegment *segment, GstFormat format, guint64 running_time);
+GST_API
+gint gst_segment_position_from_running_time_full (const GstSegment *segment, GstFormat format, guint64 running_time, guint64 * position);
+
+GST_API
+guint64 gst_segment_position_from_running_time (const GstSegment *segment, GstFormat format, guint64 running_time);
+
+GST_API
gboolean gst_segment_set_running_time (GstSegment *segment, GstFormat format, guint64 running_time);
+GST_API
+gboolean gst_segment_offset_running_time (GstSegment *segment, GstFormat format, gint64 offset);
+
+GST_API
gboolean gst_segment_clip (const GstSegment *segment, GstFormat format, guint64 start,
guint64 stop, guint64 *clip_start, guint64 *clip_stop);
-
-
+GST_API
gboolean gst_segment_do_seek (GstSegment * segment, gdouble rate,
GstFormat format, GstSeekFlags flags,
GstSeekType start_type, guint64 start,
GstSeekType stop_type, guint64 stop, gboolean * update);
+GST_API
+gboolean gst_segment_is_equal (const GstSegment * s0, const GstSegment * s1);
+
+#ifdef G_DEFINE_AUTOPTR_CLEANUP_FUNC
+G_DEFINE_AUTOPTR_CLEANUP_FUNC(GstSegment, gst_segment_free)
+#endif
G_END_DECLS