+// SPDX-License-Identifier: GPL-2.0+
/*
* Mentor USB OTG Core host controller driver.
*
* Copyright (c) 2008 Texas Instruments
*
- * SPDX-License-Identifier: GPL-2.0+
- *
* Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
*/
#include <common.h>
+#include <log.h>
#include <usb.h>
+#include <linux/delay.h>
#include "musb_hcd.h"
/* MSC control transfers */
-#define USB_MSC_BBB_RESET 0xFF
+#define USB_MSC_BBB_RESET 0xFF
#define USB_MSC_BBB_GET_MAX_LUN 0xFE
/* Endpoint configuration information */
static int rh_devnum;
static u32 port_status;
-/* Device descriptor */
-static const u8 root_hub_dev_des[] = {
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x00, /* __u16 bcdUSB; v1.1 */
- 0x02,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static const u8 root_hub_config_des[] = {
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x02,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static const unsigned char root_hub_str_index0[] = {
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
+#include <usbroothubdes.h>
-static const unsigned char root_hub_str_index1[] = {
- 0x1c, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'M', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'U', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'S', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'B', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
#endif
/*
}
/*
- * This function checks if RxStall has occured on the endpoint. If a RxStall
- * has occured, the RxStall is cleared and 1 is returned. If RxStall has
- * not occured, 0 is returned.
+ * This function checks if RxStall has occurred on the endpoint. If a RxStall
+ * has occurred, the RxStall is cleared and 1 is returned. If RxStall has
+ * not occurred, 0 is returned.
*/
static u8 check_stall(u8 ep, u8 dir_out)
{
{
u16 csr;
int result = 1;
- int timeout = CONFIG_MUSB_TIMEOUT;
+ int timeout = CONFIG_USB_MUSB_TIMEOUT;
while (result > 0) {
csr = readw(&musbr->txcsr);
static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
- int timeout = CONFIG_MUSB_TIMEOUT;
+ int timeout = CONFIG_USB_MUSB_TIMEOUT;
do {
if (check_stall(ep, 1)) {
static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
- int timeout = CONFIG_MUSB_TIMEOUT;
+ int timeout = CONFIG_USB_MUSB_TIMEOUT;
do {
if (check_stall(ep, 0)) {
/* Set TXPKTRDY bit */
csr = readw(&musbr->txcsr);
- writew(csr | MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY,
- &musbr->txcsr);
+
+ csr |= MUSB_CSR0_TXPKTRDY;
+ csr |= MUSB_CSR0_H_DIS_PING;
+ writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
if (result < 0)
break;
/* Set the StatusPkt bit */
csr = readw(&musbr->txcsr);
- csr |= (MUSB_CSR0_H_DIS_PING | MUSB_CSR0_TXPKTRDY |
- MUSB_CSR0_H_STATUSPKT);
+ csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT);
+ csr |= MUSB_CSR0_H_DIS_PING;
writew(csr, &musbr->txcsr);
/* Wait until TXPKTRDY bit is cleared */
int result;
/* Set the StatusPkt bit and ReqPkt bit */
- csr = MUSB_CSR0_H_DIS_PING | MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
+ csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
+ csr |= MUSB_CSR0_H_DIS_PING;
writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
nextlen = ((len-txlen) < dev->epmaxpacketout[ep]) ?
(len-txlen) : dev->epmaxpacketout[ep];
-#ifdef CONFIG_USB_BLACKFIN
- /* Set the transfer data size */
- writew(nextlen, &musbr->txcount);
-#endif
-
/* Write the data to the FIFO */
write_fifo(MUSB_BULK_EP, nextlen,
(void *)(((u8 *)buffer) + txlen));
/*
* This function initializes the usb controller module.
*/
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
u8 power;
u32 timeout;
* This function supports usb interrupt transfers. Currently, usb interrupt
* transfers are not supported.
*/
-int submit_int_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int len, int interval)
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval, bool nonblock)
{
int dir_out = usb_pipeout(pipe);
int ep = usb_pipeendpoint(pipe);
projects / platform / kernel / u-boot.git / blobdiff