Convert CONFIG_SPL_NAND_LOAD et al to Kconfig

[platform/kernel/u-boot.git] / configs / sama5d4_xplained_nandflash_defconfig

diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index addf445..94a2e8e 100644 (file)
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -1,32 +1,34 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D4_XPLAINED=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
 CONFIG_SPL_TEXT_BASE=0x200000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
-CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_BASE=y
@@ -39,6 +41,8 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -57,13 +61,14 @@ CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
 CONFIG_I2C_EEPROM=y
-CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_PMECC_CAP=8
 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
+CONFIG_SYS_NAND_PAGE_SIZE=0x1000
+CONFIG_SYS_NAND_OOBSIZE=0xe0
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
@@ -81,7 +86,6 @@ CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y