Convert CONFIG_SYS_FSL_DDR_INTLV_256B to Kconfig

[platform/kernel/u-boot.git] / configs / ls2080aqds_qspi_defconfig

diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig
index ec07a49..d2dd95e 100644 (file)
--- a/configs/ls2080aqds_qspi_defconfig
+++ b/configs/ls2080aqds_qspi_defconfig
@@ -1,15 +1,20 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
 CONFIG_SYS_MALLOC_LEN=0x202000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
-CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_AHCI=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_FSL_QIXIS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT=y
@@ -23,6 +28,8 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
 CONFIG_RESET_PHY_R=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
@@ -50,12 +57,15 @@ CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DIMM_SLOTS_PER_CTLR=2
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_SYS_FSL_DDR_INTLV_256B=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EARLY_INIT=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
+CONFIG_ESDHC_DETECT_QUIRK=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
@@ -68,6 +78,8 @@ CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_TERANETICS=y
 CONFIG_PHY_VITESSE=y
+CONFIG_FSL_MEMAC=y
+CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y