Convert CONFIG_SPL_NAND_LOAD et al to Kconfig

[platform/kernel/u-boot.git] / configs / T1024RDB_NAND_defconfig

diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig
index a298779..16445e1 100644 (file)
--- a/configs/T1024RDB_NAND_defconfig
+++ b/configs/T1024RDB_NAND_defconfig
@@ -6,11 +6,12 @@ CONFIG_SYS_MEMTEST_START=0x00200000
 CONFIG_SYS_MEMTEST_END=0x00400000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
+CONFIG_SYS_MALLOC_LEN=0xa00000
+CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
 CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T1024RDB=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
@@ -19,22 +20,28 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
+CONFIG_RAMBOOT_PBL=y
+CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg"
+CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_nand_rcw.cfg"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_ID_EEPROM=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DM=y
@@ -55,7 +62,16 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x118000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x118100
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -64,6 +80,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x80000
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
@@ -76,8 +93,6 @@ CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_FSL=y
 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
 CONFIG_DM_RTC=y
@@ -86,7 +101,6 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64