m68k: rename CONFIG_MCFTMR to CFG_MCFTMR

[platform/kernel/u-boot.git] / board / freescale / m5373evb / README

diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README
index 582e0c3..e8bf75f 100644 (file)
--- a/board/freescale/m5373evb/README
+++ b/board/freescale/m5373evb/README
@@ -23,7 +23,7 @@ Changed files:
 - arch/m68k/cpu/mcf532x/config.mk              config make
 - arch/m68k/cpu/mcf532x/start.S                start up assembly code
 
-- doc/README.m5373evb          This readme file
+- board/freescale/m5373evb/README      This readme file
 
 - drivers/net/mcffec.c         ColdFire common FEC driver
 - drivers/serial/mcfuart.c     ColdFire common UART driver
@@ -67,7 +67,7 @@ CONFIG_M5373          -- define for all Freescale MCF5373 CPUs
 CONFIG_M5373EVB                -- define for M5373EVB board
 
 CONFIG_MCFUART         -- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT           -- define UART port number, start with 0, 1 and 2
+CFG_SYS_UART_PORT              -- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE                -- define UART baudrate
 
 CONFIG_MCFRTC          -- define to use common CF RTC driver
@@ -86,28 +86,26 @@ CONFIG_SYS_FEC0_PINMUX              -- Set FEC0 Pin configuration
 CONFIG_SYS_FEC0_MIIBASE        -- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP       -- set FEC timeout loop
 
-CONFIG_MCFTMR          -- define to use DMA timer
-CONFIG_MCFPIT          -- define to use PIT timer
+CFG_MCFTMR             -- define to use DMA timer
 
 CONFIG_SYS_I2C_FSL     -- define to use FSL common I2C driver
-CONFIG_HARD_I2C                -- define for I2C hardware support
 CONFIG_SYS_I2C_SOFT    -- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED           -- define for I2C speed
 CONFIG_SYS_I2C_SLAVE           -- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET          -- define for I2C base address offset
 CONFIG_SYS_IMMR                -- define for MBAR offset
 
-CONFIG_SYS_MBAR                -- define MBAR offset
+CFG_SYS_MBAR           -- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CONFIG_SYS_INIT_RAM_ADDR       -- defines the base address of the MCF5373 internal SRAM
+CFG_SYS_INIT_RAM_ADDR  -- defines the base address of the MCF5373 internal SRAM
 
 CONFIG_SYS_CSn_BASE    -- defines the Chip Select Base register
 CONFIG_SYS_CSn_MASK    -- defines the Chip Select Mask register
 CONFIG_SYS_CSn_CTRL    -- defines the Chip Select Control register
 
-CONFIG_SYS_SDRAM_BASE  -- defines the DRAM Base
+CFG_SYS_SDRAM_BASE     -- defines the DRAM Base
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================