#!/bin/sh
-# a u t o g e n . s h
-#
-# Copyright (c) 2005-2007 United States Government as represented by
-# the U.S. Army Research Laboratory.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-#
-# 3. The name of the author may not be used to endorse or promote
-# products derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-###
-#
-# Script for automatically preparing the sources for compilation by
-# performing the myrid of necessary steps. The script attempts to
-# detect proper version support, and outputs warnings about particular
-# systems that have autotool peculiarities.
-#
-# Basically, if everything is set up and installed correctly, the
-# script will validate that minimum versions of the GNU Build System
-# tools are installed, account for several common configuration
-# issues, and then simply run autoreconf for you.
-#
-# If autoreconf fails, which can happen for many valid configurations,
-# this script proceeds to run manual preparation steps effectively
-# providing a POSIX shell script (mostly complete) reimplementation of
-# autoreconf.
-#
-# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER
-# environment variables and corresponding _OPTIONS variables (e.g.
-# AUTORECONF_OPTIONS) may be used to override the default automatic
-# detection behaviors. Similarly the _VERSION variables will override
-# the minimum required version numbers.
-#
-# Examples:
-#
-# To obtain help on usage:
-# ./autogen.sh --help
-#
-# To obtain verbose output:
-# ./autogen.sh --verbose
-#
-# To skip autoreconf and prepare manually:
-# AUTORECONF=false ./autogen.sh
-#
-# To verbosely try running with an older (unsupported) autoconf:
-# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose
-#
-# Author: Christopher Sean Morrison <morrison@brlcad.org>
-#
-######################################################################
-
-# set to minimum acceptible version of autoconf
-if [ "x$AUTOCONF_VERSION" = "x" ] ; then
- AUTOCONF_VERSION=2.52
-fi
-# set to minimum acceptible version of automake
-if [ "x$AUTOMAKE_VERSION" = "x" ] ; then
- AUTOMAKE_VERSION=1.6.0
-fi
-# set to minimum acceptible version of libtool
-if [ "x$LIBTOOL_VERSION" = "x" ] ; then
- LIBTOOL_VERSION=1.4.2
-fi
+# Run this to generate all the initial makefiles, etc.
+
+#name of package
+PKG_NAME=${PKG_NAME:-Package}
+srcdir=${srcdir:-.}
+
+# default version requirements ...
+REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
+REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
+REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
+REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
+REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
+REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
+REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
+REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
+REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
+REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
+
+# a list of required m4 macros. Package can set an initial value
+REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
+FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
+
+# Not all echo versions allow -n, so we check what is possible. This test is
+# based on the one in autoconf.
+ECHO_C=
+ECHO_N=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ;;
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+# some terminal codes ...
+boldface="`tput bold 2>/dev/null`"
+normal="`tput sgr0 2>/dev/null`"
+printbold() {
+ echo $ECHO_N "$boldface" $ECHO_C
+ echo "$@"
+ echo $ECHO_N "$normal" $ECHO_C
+}
+printerr() {
+ echo "$@" >&2
+}
-##################
-# ident function #
-##################
-ident ( ) {
- # extract copyright from header
- __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`"
- if [ "x$__copyright" = "x" ] ; then
- __copyright="`date +%Y`"
- fi
+# Usage:
+# compare_versions MIN_VERSION ACTUAL_VERSION
+# returns true if ACTUAL_VERSION >= MIN_VERSION
+compare_versions() {
+ ch_min_version=$1
+ ch_actual_version=$2
+ ch_status=0
+ IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
+ set $ch_actual_version
+ for ch_min in $ch_min_version; do
+ ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
+ if [ -z "$ch_min" ]; then break; fi
+ if [ -z "$ch_cur" ]; then ch_status=1; break; fi
+ if [ $ch_cur -gt $ch_min ]; then break; fi
+ if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
+ done
+ IFS="$ch_save_IFS"
+ return $ch_status
+}
- # extract version from CVS Id string
- __id="$Id: autogen.sh,v 14.97 2007/06/18 22:25:02 brlcad Exp $"
- __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`"
- if [ "x$__version" = "x" ] ; then
- __version=""
+# Usage:
+# version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
+# checks to see if the package is available
+version_check() {
+ vc_package=$1
+ vc_variable=$2
+ vc_checkprogs=$3
+ vc_min_version=$4
+ vc_source=$5
+ vc_status=1
+
+ vc_checkprog=`eval echo "\\$$vc_variable"`
+ if [ -n "$vc_checkprog" ]; then
+ printbold "using $vc_checkprog for $vc_package"
+ return 0
fi
- echo "autogen.sh build preparation script by Christopher Sean Morrison"
- echo "revised 3-clause BSD-style license, copyright (c) $__copyright"
- echo "script version $__version, ISO/IEC 9945 POSIX shell script"
+ if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
+ vc_comparator="="
+ else
+ vc_comparator=">="
+ fi
+ printbold "checking for $vc_package $vc_comparator $vc_min_version..."
+ for vc_checkprog in $vc_checkprogs; do
+ echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
+ if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
+ vc_actual_version=`$vc_checkprog --version | head -n 1 | \
+ sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
+ if compare_versions $vc_min_version $vc_actual_version; then
+ echo "found $vc_actual_version"
+ # set variables
+ eval "$vc_variable=$vc_checkprog; \
+ ${vc_variable}_VERSION=$vc_actual_version"
+ vc_status=0
+ break
+ else
+ echo "too old (found version $vc_actual_version)"
+ fi
+ else
+ echo "not found."
+ fi
+ done
+ if [ "$vc_status" != 0 ]; then
+ printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
+ printerr " to build $PKG_NAME. Download the appropriate package for"
+ printerr " from your distribution or get the source tarball at"
+ printerr " $vc_source"
+ printerr
+ exit $vc_status
+ fi
+ return $vc_status
}
+# Usage:
+# require_m4macro filename.m4
+# adds filename.m4 to the list of required macros
+require_m4macro() {
+ case "$REQUIRED_M4MACROS" in
+ $1\ * | *\ $1\ * | *\ $1) ;;
+ *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
+ esac
+}
-##################
-# USAGE FUNCTION #
-##################
-usage ( ) {
- echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [--version]"
- echo " --help Help on $NAME_OF_AUTOGEN usage"
- echo " --verbose Verbose progress output"
- echo " --quiet Quiet suppressed progress output"
- echo " --version Only perform GNU Build System version checks"
- echo
- echo "Description: This script will validate that minimum versions of the"
- echo "GNU Build System tools are installed and then run autoreconf for you."
- echo "Should autoreconf fail, manual preparation steps will be run"
- echo "potentially accounting for several common preparation issues. The"
-
- echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER,"
- echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS"
- echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the"
- echo "default automatic detection behavior."
- echo
-
- ident
-
- return 0
+forbid_m4macro() {
+ case "$FORBIDDEN_M4MACROS" in
+ $1\ * | *\ $1\ * | *\ $1) ;;
+ *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
+ esac
}
+# Usage:
+# add_to_cm_macrodirs dirname
+# Adds the dir to $cm_macrodirs, if it's not there yet.
+add_to_cm_macrodirs() {
+ case $cm_macrodirs in
+ "$1 "* | *" $1 "* | *" $1") ;;
+ *) cm_macrodirs="$cm_macrodirs $1";;
+ esac
+}
-##########################
-# VERSION_ERROR FUNCTION #
-##########################
-version_error ( ) {
- if [ "x$1" = "x" ] ; then
- echo "INTERNAL ERROR: version_error was not provided a version"
- exit 1
- fi
- if [ "x$2" = "x" ] ; then
- echo "INTERNAL ERROR: version_error was not provided an application name"
- exit 1
- fi
- $ECHO
- $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch,"
- $ECHO " at least version $1 of $2 must be installed."
- $ECHO
- $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will"
- $ECHO "run configure or make. Either the GNU Autotools will need to be installed"
- $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source"
- $ECHO "code on another system and then transferred to here. -- Cheers!"
- $ECHO
+# Usage:
+# print_m4macros_error
+# Prints an error message saying that autoconf macros were misused
+print_m4macros_error() {
+ printerr "***Error***: some autoconf macros required to build $PKG_NAME"
+ printerr " were not found in your aclocal path, or some forbidden"
+ printerr " macros were found. Perhaps you need to adjust your"
+ printerr " ACLOCAL_FLAGS?"
+ printerr
}
-##########################
-# VERSION_CHECK FUNCTION #
-##########################
-version_check ( ) {
- if [ "x$1" = "x" ] ; then
- echo "INTERNAL ERROR: version_check was not provided a minimum version"
- exit 1
- fi
- _min="$1"
- if [ "x$2" = "x" ] ; then
- echo "INTERNAL ERROR: version check was not provided a comparison version"
- exit 1
+# Usage:
+# check_m4macros
+# Checks that all the requested macro files are in the aclocal macro path
+# Uses REQUIRED_M4MACROS and ACLOCAL variables.
+check_m4macros() {
+ # construct list of macro directories
+ cm_macrodirs=`$ACLOCAL --print-ac-dir`
+ # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
+ # but it contains only Automake's own macros, so we can ignore it.
+
+ # Read the dirlist file, supported by Automake >= 1.7.
+ if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
+ cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
+ if [ -n "$cm_dirlist" ] ; then
+ for cm_dir in $cm_dirlist; do
+ if [ -d $cm_dir ]; then
+ add_to_cm_macrodirs $cm_dir
+ fi
+ done
+ fi
fi
- _cur="$2"
- # needed to handle versions like 1.10 and 1.4-p6
- _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
- _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
-
- _min_major="`echo $_min | cut -d. -f1`"
- _min_minor="`echo $_min | cut -d. -f2`"
- _min_patch="`echo $_min | cut -d. -f3`"
-
- _cur_major="`echo $_cur | cut -d. -f1`"
- _cur_minor="`echo $_cur | cut -d. -f2`"
- _cur_patch="`echo $_cur | cut -d. -f3`"
+ # Parse $ACLOCAL_FLAGS
+ set - $ACLOCAL_FLAGS
+ while [ $# -gt 0 ]; do
+ if [ "$1" = "-I" ]; then
+ add_to_cm_macrodirs "$2"
+ shift
+ fi
+ shift
+ done
- if [ "x$_min_major" = "x" ] ; then
- _min_major=0
- fi
- if [ "x$_min_minor" = "x" ] ; then
- _min_minor=0
- fi
- if [ "x$_min_patch" = "x" ] ; then
- _min_patch=0
- fi
- if [ "x$_cur_minor" = "x" ] ; then
- _cur_major=0
- fi
- if [ "x$_cur_minor" = "x" ] ; then
- _cur_minor=0
- fi
- if [ "x$_cur_patch" = "x" ] ; then
- _cur_patch=0
+ cm_status=0
+ if [ -n "$REQUIRED_M4MACROS" ]; then
+ printbold "Checking for required M4 macros..."
+ # check that each macro file is in one of the macro dirs
+ for cm_macro in $REQUIRED_M4MACROS; do
+ cm_macrofound=false
+ for cm_dir in $cm_macrodirs; do
+ if [ -f "$cm_dir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ # The macro dir in Cygwin environments may contain a file
+ # called dirlist containing other directories to look in.
+ if [ -f "$cm_dir/dirlist" ]; then
+ for cm_otherdir in `cat $cm_dir/dirlist`; do
+ if [ -f "$cm_otherdir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ done
+ fi
+ done
+ if $cm_macrofound; then
+ :
+ else
+ printerr " $cm_macro not found"
+ cm_status=1
+ fi
+ done
fi
-
- $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}"
-
- if [ $_min_major -lt $_cur_major ] ; then
- return 0
- elif [ $_min_major -eq $_cur_major ] ; then
- if [ $_min_minor -lt $_cur_minor ] ; then
- return 0
- elif [ $_min_minor -eq $_cur_minor ] ; then
- if [ $_min_patch -lt $_cur_patch ] ; then
- return 0
- elif [ $_min_patch -eq $_cur_patch ] ; then
- return 0
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
+ fi
+ if [ -n "$FORBIDDEN_M4MACROS" ]; then
+ printbold "Checking for forbidden M4 macros..."
+ # check that each macro file is in one of the macro dirs
+ for cm_macro in $FORBIDDEN_M4MACROS; do
+ cm_macrofound=false
+ for cm_dir in $cm_macrodirs; do
+ if [ -f "$cm_dir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ done
+ if $cm_macrofound; then
+ printerr " $cm_macro found (should be cleared from macros dir)"
+ cm_status=1
fi
- fi
+ done
fi
- return 1
-}
-
-
-######################################
-# LOCATE_CONFIGURE_TEMPLATE FUNCTION #
-######################################
-locate_configure_template ( ) {
- _pwd="`pwd`"
- if test -f "./configure.ac" ; then
- echo "./configure.ac"
- elif test -f "./configure.in" ; then
- echo "./configure.in"
- elif test -f "$_pwd/configure.ac" ; then
- echo "$_pwd/configure.ac"
- elif test -f "$_pwd/configure.in" ; then
- echo "$_pwd/configure.in"
- elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then
- echo "$PATH_TO_AUTOGEN/configure.ac"
- elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then
- echo "$PATH_TO_AUTOGEN/configure.in"
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
fi
}
+# try to catch the case where the macros2/ directory hasn't been cleared out.
+forbid_m4macro gnome-cxx-check.m4
-##################
-# argument check #
-##################
-ARGS="$*"
-PATH_TO_AUTOGEN="`dirname $0`"
-NAME_OF_AUTOGEN="`basename $0`"
-AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN"
-
-LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4"
-
-if [ "x$HELP" = "x" ] ; then
- HELP=no
-fi
-if [ "x$QUIET" = "x" ] ; then
- QUIET=no
-fi
-if [ "x$VERBOSE" = "x" ] ; then
- VERBOSE=no
-fi
-if [ "x$VERSION_ONLY" = "x" ] ; then
- VERSION_ONLY=no
-fi
-if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then
- AUTORECONF_OPTIONS="-i -f"
-fi
-if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then
- AUTOCONF_OPTIONS="-f"
-fi
-if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then
- AUTOMAKE_OPTIONS="-a -c -f"
-fi
-ALT_AUTOMAKE_OPTIONS="-a -c"
-if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then
- LIBTOOLIZE_OPTIONS="--automake -c -f"
-fi
-ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force"
-if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then
- ACLOCAL_OPTIONS=""
-fi
-if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then
- AUTOHEADER_OPTIONS=""
-fi
-for arg in $ARGS ; do
- case "x$arg" in
- x--help) HELP=yes ;;
- x-[hH]) HELP=yes ;;
- x--quiet) QUIET=yes ;;
- x-[qQ]) QUIET=yes ;;
- x--verbose) VERBOSE=yes ;;
- x-[vV]) VERBOSE=yes ;;
- x--version) VERSION_ONLY=yes ;;
- *)
- echo "Unknown option: $arg"
- echo
- usage
- exit 1
- ;;
- esac
-done
-
-
-#####################
-# environment check #
-#####################
+want_libtool=false
+want_gettext=false
+want_glib_gettext=false
+want_intltool=false
+want_pkg_config=false
+want_gtk_doc=false
+want_gnome_doc_utils=false
+want_maintainer_mode=false
-# sanity check before recursions potentially begin
-if [ ! -f "$AUTOGEN_SH" ] ; then
- echo "INTERNAL ERROR: $AUTOGEN_SH does not exist"
- if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then
- echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH"
+configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ continue
fi
- exit 1
-fi
-
-# force locale setting to C so things like date output as expected
-LC_ALL=C
-
-# commands that this script expects
-for __cmd in echo head tail pwd ; do
- echo "test" | $__cmd > /dev/null 2>&1
- if [ $? != 0 ] ; then
- echo "INTERNAL ERROR: '${__cmd}' command is required"
- exit 2
+ if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
+ grep "^LT_INIT" $configure_ac >/dev/null; then
+ want_libtool=true
fi
-done
-echo "test" | grep "test" > /dev/null 2>&1
-if test ! x$? = x0 ; then
- echo "INTERNAL ERROR: grep command is required"
- exit 1
-fi
-echo "test" | sed "s/test/test/" > /dev/null 2>&1
-if test ! x$? = x0 ; then
- echo "INTERNAL ERROR: sed command is required"
- exit 1
-fi
-
-
-# determine the behavior of echo
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-# determine the behavior of head
-case "x`echo 'head' | head -n 1 2>&1`" in
- *xhead*) HEAD_N="n " ;;
- *) HEAD_N="" ;;
-esac
-
-# determine the behavior of tail
-case "x`echo 'tail' | tail -n 1 2>&1`" in
- *xtail*) TAIL_N="n " ;;
- *) TAIL_N="" ;;
-esac
-
-VERBOSE_ECHO=:
-ECHO=:
-if [ "x$QUIET" = "xyes" ] ; then
- if [ "x$VERBOSE" = "xyes" ] ; then
- echo "Verbose output quelled by quiet option. Further output disabled."
+ if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
+ want_gettext=true
fi
-else
- ECHO=echo
- if [ "x$VERBOSE" = "xyes" ] ; then
- echo "Verbose output enabled"
- VERBOSE_ECHO=echo
+ if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
+ want_glib_gettext=true
fi
-fi
-
-
-# allow a recursive run to disable further recursions
-if [ "x$RUN_RECURSIVE" = "x" ] ; then
- RUN_RECURSIVE=yes
-fi
-
-
-################################################
-# check for help arg and bypass version checks #
-################################################
-if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then
- HELP=yes
-fi
-if [ "x$HELP" = "xyes" ] ; then
- usage
- $ECHO "---"
- $ECHO "Help was requested. No preparation or configuration will be performed."
- exit 0
-fi
-
-
-#######################
-# set up signal traps #
-#######################
-untrap_abnormal ( ) {
- for sig in 1 2 13 15; do
- trap - $sig
- done
-}
-
-# do this cleanup whenever we exit.
-trap '
- # start from the root
- if test -d "$START_PATH" ; then
- cd "$START_PATH"
+ if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
+ want_intltool=true
fi
-
- # restore/delete backup files
- if test "x$PFC_INIT" = "x1" ; then
- recursive_restore
+ if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
+ want_pkg_config=true
fi
-' 0
-
-# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15)
-for sig in 1 2 13 15; do
- trap '
- $ECHO ""
- $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'"
-
- # start from the root
- if test -d "$START_PATH" ; then
- cd "$START_PATH"
- fi
-
- # clean up on abnormal exit
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
-
- if test -f "acinclude.m4.$$.backup" ; then
- $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4"
- chmod u+w acinclude.m4
- cat acinclude.m4.$$.backup > acinclude.m4
-
- $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup"
- rm -f acinclude.m4.$$.backup
- fi
-
- { (exit 1); exit 1; }
-' $sig
-done
-
-
-#############################
-# look for a configure file #
-#############################
-if [ "x$CONFIGURE" = "x" ] ; then
- CONFIGURE="`locate_configure_template`"
- if [ ! "x$CONFIGURE" = "x" ] ; then
- $VERBOSE_ECHO "Found a configure template: $CONFIGURE"
+ if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
+ want_gtk_doc=true
fi
-else
- $ECHO "Using CONFIGURE environment variable override: $CONFIGURE"
-fi
-if [ "x$CONFIGURE" = "x" ] ; then
- if [ "x$VERSION_ONLY" = "xyes" ] ; then
- CONFIGURE=/dev/null
- else
- $ECHO
- $ECHO "A configure.ac or configure.in file could not be located implying"
- $ECHO "that the GNU Build System is at least not used in this directory. In"
- $ECHO "any case, there is nothing to do here without one of those files."
- $ECHO
- $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
- exit 1
+ if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
+ want_gnome_doc_utils=true
fi
-fi
-####################
-# get project name #
-####################
-if [ "x$PROJECT" = "x" ] ; then
- PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if [ "x$PROJECT" = "xAC_INIT" ] ; then
- # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead
- PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ # check that AM_MAINTAINER_MODE is used
+ if grep "^AM_MAINTAINER_MODE" $configure_ac >/dev/null; then
+ want_maintainer_mode=true
fi
- if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then
- PROJECT="project"
+
+ # check to make sure gnome-common macros can be found ...
+ if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
+ grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
+ grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
+ require_m4macro gnome-common.m4
fi
- if [ "x$PROJECT" = "x" ] ; then
- PROJECT="project"
+ if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
+ grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
+ require_m4macro gnome-compiler-flags.m4
fi
-else
- $ECHO "Using PROJECT environment variable override: $PROJECT"
-fi
-$ECHO "Preparing the $PROJECT build system...please wait"
-$ECHO
+done
+#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
+WANT_AUTOCONF_2_5=1
+export WANT_AUTOCONF_2_5
+version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
+ "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz"
+AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
+
+case $REQUIRED_AUTOMAKE_VERSION in
+ 1.4*) automake_progs="automake-1.4" ;;
+ 1.5*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
+ 1.6*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
+ 1.7*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
+ 1.8*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8" ;;
+ 1.9*) automake_progs="automake-1.11 automake-1.10 automake-1.9" ;;
+ 1.10*) automake_progs="automake-1.11 automake-1.10" ;;
+ 1.11*) automake_progs="automake-1.11" ;;
+esac
+version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
+ "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz"
+ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
-########################
-# check for autoreconf #
-########################
-HAVE_AUTORECONF=no
-if [ "x$AUTORECONF" = "x" ] ; then
- for AUTORECONF in autoreconf ; do
- $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version"
- $AUTORECONF --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- HAVE_AUTORECONF=yes
- break
- fi
- done
-else
- HAVE_AUTORECONF=yes
- $ECHO "Using AUTORECONF environment variable override: $AUTORECONF"
+if $want_libtool; then
+ version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
+ "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz"
+ require_m4macro libtool.m4
fi
-
-##########################
-# autoconf version check #
-##########################
-_acfound=no
-if [ "x$AUTOCONF" = "x" ] ; then
- for AUTOCONF in autoconf ; do
- $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version"
- $AUTOCONF --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- _acfound=yes
- break
- fi
- done
-else
- _acfound=yes
- $ECHO "Using AUTOCONF environment variable override: $AUTOCONF"
+if $want_gettext; then
+ version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
+ "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz"
+ require_m4macro gettext.m4
fi
-_report_error=no
-if [ ! "x$_acfound" = "xyes" ] ; then
- $ECHO "ERROR: Unable to locate GNU Autoconf."
- _report_error=yes
-else
- _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Autoconf version $_version"
- version_check "$AUTOCONF_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
+if $want_glib_gettext; then
+ version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
+ "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
+ require_m4macro glib-gettext.m4
fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$AUTOCONF_VERSION" "GNU Autoconf"
- exit 1
-fi
-
-##########################
-# automake version check #
-##########################
-_amfound=no
-if [ "x$AUTOMAKE" = "x" ] ; then
- for AUTOMAKE in automake ; do
- $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version"
- $AUTOMAKE --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- _amfound=yes
- break
- fi
- done
-else
- _amfound=yes
- $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE"
+if $want_intltool; then
+ version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
+ require_m4macro intltool.m4
fi
-
-_report_error=no
-if [ ! "x$_amfound" = "xyes" ] ; then
- $ECHO
- $ECHO "ERROR: Unable to locate GNU Automake."
- _report_error=yes
-else
- _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Automake version $_version"
- version_check "$AUTOMAKE_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$AUTOMAKE_VERSION" "GNU Automake"
- exit 1
+if $want_pkg_config; then
+ version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
+ "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
+ require_m4macro pkg.m4
fi
-
-########################
-# check for libtoolize #
-########################
-HAVE_LIBTOOLIZE=yes
-HAVE_ALT_LIBTOOLIZE=no
-_ltfound=no
-if [ "x$LIBTOOLIZE" = "x" ] ; then
- LIBTOOLIZE=libtoolize
- $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version"
- $LIBTOOLIZE --version > /dev/null 2>&1
- if [ ! $? = 0 ] ; then
- HAVE_LIBTOOLIZE=no
- $ECHO
- if [ "x$HAVE_AUTORECONF" = "xno" ] ; then
- $ECHO "Warning: libtoolize does not appear to be available."
- else
- $ECHO "Warning: libtoolize does not appear to be available. This means that"
- $ECHO "the automatic build preparation via autoreconf will probably not work."
- $ECHO "Preparing the build by running each step individually, however, should"
- $ECHO "work and will be done automatically for you if autoreconf fails."
- fi
-
- # look for some alternates
- for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do
- $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version"
- _glibtoolize="`$tool --version > /dev/null 2>&1`"
- if [ $? = 0 ] ; then
- $VERBOSE_ECHO "Found $tool --version"
- _glti="`which $tool`"
- if [ "x$_glti" = "x" ] ; then
- $VERBOSE_ECHO "Cannot find $tool with which"
- continue;
- fi
- if test ! -f "$_glti" ; then
- $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file"
- continue;
- fi
- _gltidir="`dirname $_glti`"
- if [ "x$_gltidir" = "x" ] ; then
- $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti"
- continue;
- fi
- if test ! -d "$_gltidir" ; then
- $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory"
- continue;
- fi
- HAVE_ALT_LIBTOOLIZE=yes
- LIBTOOLIZE="$tool"
- $ECHO
- $ECHO "Fortunately, $tool was found which means that your system may simply"
- $ECHO "have a non-standard or incomplete GNU Autotools install. If you have"
- $ECHO "sufficient system access, it may be possible to quell this warning by"
- $ECHO "running:"
- $ECHO
- sudo -V > /dev/null 2>&1
- if [ $? = 0 ] ; then
- $ECHO " sudo ln -s $_glti $_gltidir/libtoolize"
- $ECHO
- else
- $ECHO " ln -s $_glti $_gltidir/libtoolize"
- $ECHO
- $ECHO "Run that as root or with proper permissions to the $_gltidir directory"
- $ECHO
- fi
- _ltfound=yes
- break
- fi
- done
- else
- _ltfound=yes
- fi
-else
- _ltfound=yes
- $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE"
+if $want_gtk_doc; then
+ version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/"
+ require_m4macro gtk-doc.m4
fi
-
-############################
-# libtoolize version check #
-############################
-_report_error=no
-if [ ! "x$_ltfound" = "xyes" ] ; then
- $ECHO
- $ECHO "ERROR: Unable to locate GNU Libtool."
- _report_error=yes
-else
- _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Libtool version $_version"
- version_check "$LIBTOOL_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$LIBTOOL_VERSION" "GNU Libtool"
- exit 1
+if $want_gnome_doc_utils; then
+ version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/"
fi
-
-#####################
-# check for aclocal #
-#####################
-if [ "x$ACLOCAL" = "x" ] ; then
- for ACLOCAL in aclocal ; do
- $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version"
- $ACLOCAL --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- break
- fi
- done
-else
- $ECHO "Using ACLOCAL environment variable override: $ACLOCAL"
-fi
-
-
-########################
-# check for autoheader #
-########################
-if [ "x$AUTOHEADER" = "x" ] ; then
- for AUTOHEADER in autoheader ; do
- $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version"
- $AUTOHEADER --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- break
- fi
- done
-else
- $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER"
+if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
+ version_check gnome-common DOC_COMMON gnome-doc-common \
+ $REQUIRED_DOC_COMMON_VERSION " "
fi
+check_m4macros
-#########################
-# check if version only #
-#########################
-$VERBOSE_ECHO "Checking whether to only output version information"
-if [ "x$VERSION_ONLY" = "xyes" ] ; then
- $ECHO
- ident
- $ECHO "---"
- $ECHO "Version requested. No preparation or configuration will be performed."
- exit 0
+if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
+ printerr "**Warning**: I am going to run \`configure' with no arguments."
+ printerr "If you wish to pass any to it, please specify them on the"
+ printerr \`$0\'" command line."
+ printerr
fi
-
-#################################
-# PROTECT_FROM_CLOBBER FUNCTION #
-#################################
-protect_from_clobber ( ) {
- PFC_INIT=1
-
- # protect COPYING & INSTALL from overwrite by automake. the
- # automake force option will (inappropriately) ignore the existing
- # contents of a COPYING and/or INSTALL files (depending on the
- # version) instead of just forcing *missing* files like it does
- # for AUTHORS, NEWS, and README. this is broken but extremely
- # prevalent behavior, so we protect against it by keeping a backup
- # of the file that can later be restored.
-
- if test -f COPYING ; then
- if test -f COPYING.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "Already backed up COPYING in `pwd`"
- else
- $VERBOSE_ECHO "Backing up COPYING in `pwd`"
- $VERBOSE_ECHO "cp -p COPYING COPYING.$$.protect_from_automake.backup"
- cp -p COPYING COPYING.$$.protect_from_automake.backup
- fi
- fi
- if test -f INSTALL ; then
- if test -f INSTALL.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "Already backed up INSTALL in `pwd`"
- else
- $VERBOSE_ECHO "Backing up INSTALL in `pwd`"
- $VERBOSE_ECHO "cp -p INSTALL INSTALL.$$.protect_from_automake.backup"
- cp -p INSTALL INSTALL.$$.protect_from_automake.backup
- fi
- fi
-}
-
-
-##############################
-# RECURSIVE_PROTECT FUNCTION #
-##############################
-recursive_protect ( ) {
-
- # for projects using recursive configure, run the build
- # preparation steps for the subdirectories. this function assumes
- # START_PATH was set to pwd before recursion begins so that
- # relative paths work.
-
- # git 'r done, protect COPYING and INSTALL from being clobbered
- protect_from_clobber
-
- if test -d autom4te.cache ; then
- $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
- fi
-
- # find configure template
- _configure="`locate_configure_template`"
- if [ "x$_configure" = "x" ] ; then
- return
- fi
- # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure"
-
- # look for subdirs
- # $VERBOSE_ECHO "Looking for subdirs in `pwd`"
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- CHECK_DIRS=""
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
- fi
- done
-
- # process subdirs
- if [ ! "x$CHECK_DIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively scanning the following directories:"
- $VERBOSE_ECHO " $CHECK_DIRS"
- for dir in $CHECK_DIRS ; do
- $VERBOSE_ECHO "Protecting files from automake in $dir"
- cd "$START_PATH"
- eval "cd $dir"
-
- # recursively git 'r done
- recursive_protect
- done
- fi
-} # end of recursive_protect
-
-
-#############################
-# RESTORE_CLOBBERED FUNCION #
-#############################
-restore_clobbered ( ) {
-
- # The automake (and autoreconf by extension) -f/--force-missing
- # option may overwrite COPYING and INSTALL even if they do exist.
- # Here we restore the files if necessary.
-
- spacer=no
-
- # COPYING
- if test -f COPYING.$$.protect_from_automake.backup ; then
- if test -f COPYING ; then
- # compare entire content, restore if needed
- if test "x`cat COPYING`" != "x`cat COPYING.$$.protect_from_automake.backup`" ; then
- if test "x$spacer" = "xno" ; then
- $VERBOSE_ECHO
- spacer=yes
- fi
- # restore the backup
- $VERBOSE_ECHO "Restoring COPYING from backup (automake -f likely clobbered it)"
- $VERBOSE_ECHO "rm -f COPYING"
- rm -f COPYING
- $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
- mv COPYING.$$.protect_from_automake.backup COPYING
- fi # check contents
- elif test -f COPYING.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
- mv COPYING.$$.protect_from_automake.backup COPYING
- fi # -f COPYING
-
- # just in case
- $VERBOSE_ECHO "rm -f COPYING.$$.protect_from_automake.backup"
- rm -f COPYING.$$.protect_from_automake.backup
- fi # -f COPYING.$$.protect_from_automake.backup
-
- # INSTALL
- if test -f INSTALL.$$.protect_from_automake.backup ; then
- if test -f INSTALL ; then
- # compare entire content, restore if needed
- if test "x`cat INSTALL`" != "x`cat INSTALL.$$.protect_from_automake.backup`" ; then
- if test "x$spacer" = "xno" ; then
- $VERBOSE_ECHO
- spacer=yes
- fi
- # restore the backup
- $VERBOSE_ECHO "Restoring INSTALL from backup (automake -f likely clobbered it)"
- $VERBOSE_ECHO "rm -f INSTALL"
- rm -f INSTALL
- $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
- mv INSTALL.$$.protect_from_automake.backup INSTALL
- fi # check contents
- elif test -f INSTALL.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
- mv INSTALL.$$.protect_from_automake.backup INSTALL
- fi # -f INSTALL
-
- # just in case
- $VERBOSE_ECHO "rm -f INSTALL.$$.protect_from_automake.backup"
- rm -f INSTALL.$$.protect_from_automake.backup
- fi # -f INSTALL.$$.protect_from_automake.backup
-
- CONFIGURE="`locate_configure_template`"
- if [ "x$CONFIGURE" = "x" ] ; then
- return
- fi
-
- _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if test ! -d "$_aux_dir" ; then
- _aux_dir=.
- fi
-
- for file in config.guess config.sub ltmain.sh ; do
- if test -f "${_aux_dir}/${file}" ; then
- $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\""
- rm -f "${_aux_dir}/${file}.backup"
- fi
- done
-} # end of restore_clobbered
-
-
-##############################
-# RECURSIVE_RESTORE FUNCTION #
-##############################
-recursive_restore ( ) {
-
- # restore COPYING and INSTALL from backup if they were clobbered
- # for each directory recursively.
-
- # git 'r undone
- restore_clobbered
-
- # find configure template
- _configure="`locate_configure_template`"
- if [ "x$_configure" = "x" ] ; then
- return
- fi
-
- # look for subdirs
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- CHECK_DIRS=""
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
- fi
- done
-
- # process subdirs
- if [ ! "x$CHECK_DIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively scanning the following directories:"
- $VERBOSE_ECHO " $CHECK_DIRS"
- for dir in $CHECK_DIRS ; do
- $VERBOSE_ECHO "Checking files for automake damage in $dir"
- cd "$START_PATH"
- eval "cd $dir"
-
- # recursively git 'r undone
- recursive_restore
- done
- fi
-} # end of recursive_restore
-
-
-#######################
-# INITIALIZE FUNCTION #
-#######################
-initialize ( ) {
-
- # this routine performs a variety of directory-specific
- # initializations. some are sanity checks, some are preventive,
- # and some are necessary setup detection.
- #
- # this function sets:
- # CONFIGURE
- # SEARCH_DIRS
- # CONFIG_SUBDIRS
-
- ##################################
- # check for a configure template #
- ##################################
- CONFIGURE="`locate_configure_template`"
- if [ "x$CONFIGURE" = "x" ] ; then
- $ECHO
- $ECHO "A configure.ac or configure.in file could not be located implying"
- $ECHO "that the GNU Build System is at least not used in this directory. In"
- $ECHO "any case, there is nothing to do here without one of those files."
- $ECHO
- $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
- exit 1
- fi
-
- #####################
- # detect an aux dir #
- #####################
- _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if test ! -d "$_aux_dir" ; then
- _aux_dir=.
+topdir=`pwd`
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ basename=`basename $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ elif [ ! -w $dirname ]; then
+ echo skipping $dirname -- directory is read only
else
- $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir"
- fi
-
- ################################
- # detect a recursive configure #
- ################################
- CONFIG_SUBDIRS=""
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir"
- CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir"
+ printbold "Processing $configure_ac"
+ cd $dirname
+
+ # Note that the order these tools are called should match what
+ # autoconf's "autoupdate" package does. See bug 138584 for
+ # details.
+
+ # programs that might install new macros get run before aclocal
+ if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
+ grep "^LT_INIT" $basename >/dev/null; then
+ printbold "Running $LIBTOOLIZE..."
+ $LIBTOOLIZE --force --copy || exit 1
fi
- done
- ##########################################
- # make sure certain required files exist #
- ##########################################
- for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do
- if test ! -f $file ; then
- $VERBOSE_ECHO "Touching ${file} since it does not exist"
- touch $file
+ if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
+ printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
+ echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
+ elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
+ if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
+ printbold "Running autopoint..."
+ autopoint --force || exit 1
+ else
+ printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
+ echo "no" | $GETTEXTIZE --force --copy || exit 1
+ fi
fi
- done
- ##################################################
- # make sure certain generated files do not exist #
- ##################################################
- for file in config.guess config.sub ltmain.sh ; do
- if test -f "${_aux_dir}/${file}" ; then
- $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\""
- mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup"
+ if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
+ printbold "Running $INTLTOOLIZE..."
+ $INTLTOOLIZE --force --copy --automake || exit 1
fi
- done
-
- ############################
- # search alternate m4 dirs #
- ############################
- SEARCH_DIRS=""
- for dir in m4 ; do
- if [ -d $dir ] ; then
- $VERBOSE_ECHO "Found extra aclocal search directory: $dir"
- SEARCH_DIRS="$SEARCH_DIRS -I $dir"
+ if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
+ printbold "Running $GTKDOCIZE..."
+ $GTKDOCIZE --copy || exit 1
fi
- done
-
- ######################################
- # remove any previous build products #
- ######################################
- if test -d autom4te.cache ; then
- $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
- fi
-# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it
-# if test -f aclocal.m4 ; then
-# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it"
-# $VERBOSE_ECHO "rm -f aclocal.m4"
-# rm -f aclocal.m4
-# fi
-
-} # end of initialize()
-
-##############
-# initialize #
-##############
-
-# stash path
-START_PATH="`pwd`"
-
-# Before running autoreconf or manual steps, some prep detection work
-# is necessary or useful. Only needs to occur once per directory, but
-# does need to traverse the entire subconfigure hierarchy to protect
-# files from being clobbered even by autoreconf.
-recursive_protect
-
-# start from where we started
-cd "$START_PATH"
-
-# get ready to process
-initialize
-
-
-############################################
-# prepare build via autoreconf or manually #
-############################################
-reconfigure_manually=no
-if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then
- $ECHO
- $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C"
-
- $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS"
- autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoreconf_output"
-
- if [ ! $ret = 0 ] ; then
- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
- if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then
- $ECHO
- $ECHO "Warning: autoreconf failed but due to what is usually a common libtool"
- $ECHO "misconfiguration issue. This problem is encountered on systems that"
- $ECHO "have installed libtoolize under a different name without providing a"
- $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable."
- $ECHO
- $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE"
-
- export LIBTOOLIZE
- RUN_RECURSIVE=no
- export RUN_RECURSIVE
- untrap_abnormal
-
- $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- exit $?
- fi
+ if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
+ printbold "Running gnome-doc-common..."
+ gnome-doc-common --copy || exit 1
fi
-
- $ECHO "Warning: $AUTORECONF failed"
-
- if test -f ltmain.sh ; then
- $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should"
+ if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
+ printbold "Running $GNOME_DOC_PREPARE..."
+ $GNOME_DOC_PREPARE --force --copy || exit 1
fi
- $ECHO "Attempting to run the preparation steps individually"
- reconfigure_manually=yes
- fi
-else
- reconfigure_manually=yes
-fi
-
-
-############################
-# LIBTOOL_FAILURE FUNCTION #
-############################
-libtool_failure ( ) {
-
- # libtool is rather error-prone in comparison to the other
- # autotools and this routine attempts to compensate for some
- # common failures. the output after a libtoolize failure is
- # parsed for an error related to AC_PROG_LIBTOOL and if found, we
- # attempt to inject a project-provided libtool.m4 file.
-
- _autoconf_output="$1"
+ # Now run aclocal to pull in any additional macros needed
- if [ "x$RUN_RECURSIVE" = "xno" ] ; then
- # we already tried the libtool.m4, don't try again
- return 1
- fi
-
- if test -f "$LIBTOOL_M4" ; then
- found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`"
- if test ! "x$found_libtool" = "x" ; then
- if test -f acinclude.m4 ; then
- rm -f acinclude.m4.$$.backup
- $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup"
- cat acinclude.m4 > acinclude.m4.$$.backup
- fi
- $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4"
- chmod u+w acinclude.m4
- cat "$LIBTOOL_M4" >> acinclude.m4
-
- # don't keep doing this
- RUN_RECURSIVE=no
- export RUN_RECURSIVE
- untrap_abnormal
-
- $ECHO
- $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4"
- $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- exit $?
+ # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
+ # directory to aclocal.
+ m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+ if [ -n "$m4dir" ]; then
+ m4dir="-I $m4dir"
fi
- fi
-}
-
-
-###########################
-# MANUAL_AUTOGEN FUNCTION #
-###########################
-manual_autogen ( ) {
-
- ##################################################
- # Manual preparation steps taken are as follows: #
- # aclocal [-I m4] #
- # libtoolize --automake -c -f #
- # aclocal [-I m4] #
- # autoconf -f #
- # autoheader #
- # automake -a -c -f #
- ##################################################
+ printbold "Running $ACLOCAL..."
+ $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
- ###########
- # aclocal #
- ###########
- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
- aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$aclocal_output"
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi
-
- ##############
- # libtoolize #
- ##############
- need_libtoolize=no
- for feature in AC_PROG_LIBTOOL LT_INIT ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_libtoolize=yes
- break
- fi
- done
- if [ "x$need_libtoolize" = "xyes" ] ; then
- if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then
- $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS"
- libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$libtoolize_output"
-
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
- else
- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
- $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS"
- libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$libtoolize_output"
-
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
- fi
+ if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
+ printerr "*** obsolete gnome macros were used in $configure_ac"
fi
- ###########
- # aclocal #
- ###########
- # re-run again as instructed by libtoolize
- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
- aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$aclocal_output"
-
- # libtoolize might put ltmain.sh in the wrong place
- if test -f ltmain.sh ; then
- if test ! -f "${_aux_dir}/ltmain.sh" ; then
- $ECHO
- $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory"
- $ECHO
- $ECHO "Fortunately, the problem can be worked around by simply copying the"
- $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you."
- $ECHO
- $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\""
- cp -p ltmain.sh "${_aux_dir}/ltmain.sh"
- $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
- fi
- fi # ltmain.sh
- fi # need_libtoolize
-
- ############
- # autoconf #
- ############
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS"
- autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoconf_output"
-
- if [ ! $ret = 0 ] ; then
- # retry without the -f and check for usage of macros that are too new
- ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE"
- ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE"
- ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T"
-
- macros_to_search=""
- ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`"
- ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`"
-
- if [ $ac_major -lt 2 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
- else
- if [ $ac_minor -lt 54 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
- elif [ $ac_minor -lt 55 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros"
- elif [ $ac_minor -lt 59 ] ; then
- macros_to_search="$ac2_59_macros"
- fi
- fi
-
- configure_ac_macros=__none__
- for feature in $macros_to_search ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- if [ "x$configure_ac_macros" = "x__none__" ] ; then
- configure_ac_macros="$feature"
- else
- configure_ac_macros="$feature $configure_ac_macros"
- fi
- fi
- done
- if [ ! "x$configure_ac_macros" = "x__none__" ] ; then
- $ECHO
- $ECHO "Warning: Unsupported macros were found in $CONFIGURE"
- $ECHO
- $ECHO "The `echo $CONFIGURE | basename` file was scanned in order to determine if any"
- $ECHO "unsupported macros are used that exceed the minimum version"
- $ECHO "settings specified within this file. As such, the following macros"
- $ECHO "should be removed from configure.ac or the version numbers in this"
- $ECHO "file should be increased:"
- $ECHO
- $ECHO "$configure_ac_macros"
- $ECHO
- $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C"
+ # Now that all the macros are sorted, run autoconf and autoheader ...
+ printbold "Running $AUTOCONF..."
+ $AUTOCONF || exit 1
+ if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
+ printbold "Running $AUTOHEADER..."
+ $AUTOHEADER || exit 1
+ # this prevents automake from thinking config.h.in is out of
+ # date, since autoheader doesn't touch the file if it doesn't
+ # change.
+ test -f config.h.in && touch config.h.in
fi
- ###################
- # autoconf, retry #
- ###################
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOCONF"
- autoconf_output="`$AUTOCONF 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoconf_output"
-
- if [ ! $ret = 0 ] ; then
- # test if libtool is busted
- libtool_failure "$autoconf_output"
-
- # let the user know what went wrong
- cat <<EOF
-$autoconf_output
-EOF
- $ECHO "ERROR: $AUTOCONF failed"
- exit 2
+ # Finally, run automake to create the makefiles ...
+ printbold "Running $AUTOMAKE..."
+ if [ -f COPYING ]; then
+ cp -pf COPYING COPYING.autogen_bak
+ fi
+ if [ -f INSTALL ]; then
+ cp -pf INSTALL INSTALL.autogen_bak
+ fi
+ if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
+ $AUTOMAKE --gnu --add-missing --force --copy -Wno-portability || exit 1
else
- # autoconf sans -f and possibly sans unsupported options succeed so warn verbosely
- $ECHO
- $ECHO "Warning: autoconf seems to have succeeded by removing the following options:"
- $ECHO " AUTOCONF_OPTIONS=\"$AUTOCONF_OPTIONS\""
- $ECHO
- $ECHO "Removing those options should not be necessary and indicate some other"
- $ECHO "problem with the build system. The build preparation is highly suspect"
- $ECHO "and may result in configuration or compilation errors. Consider"
- if [ "x$VERBOSE_ECHO" = "x:" ] ; then
- $ECHO "rerunning the build preparation with verbose output enabled."
- $ECHO " $AUTOGEN_SH --verbose"
- else
- $ECHO "reviewing the minimum GNU Autotools version settings contained in"
- $ECHO "this script along with the macros being used in your `echo $CONFIGURE | basename` file."
- fi
- $ECHO
- $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
- fi # autoconf ret = 0
- fi # autoconf ret = 0
-
- ##############
- # autoheader #
- ##############
- need_autoheader=no
- for feature in AM_CONFIG_HEADER AC_CONFIG_HEADER ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_autoheader=yes
- break
- fi
- done
- if [ "x$need_autoheader" = "xyes" ] ; then
- $VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS"
- autoheader_output="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoheader_output"
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $AUTOHEADER failed" && exit 2 ; fi
- fi # need_autoheader
-
- ############
- # automake #
- ############
- need_automake=no
- for feature in AM_INIT_AUTOMAKE ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_automake=yes
- break
+ $AUTOMAKE --gnu --add-missing --copy || exit 1
fi
- done
-
- if [ "x$need_automake" = "xyes" ] ; then
- $VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS"
- automake_output="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$automake_output"
-
- if [ ! $ret = 0 ] ; then
-
- ###################
- # automake, retry #
- ###################
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOMAKE $ALT_AUTOMAKE_OPTIONS"
- # retry without the -f
- automake_output="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$automake_output"
-
- if [ ! $ret = 0 ] ; then
- # test if libtool is busted
- libtool_failure "$automake_output"
-
- # let the user know what went wrong
- cat <<EOF
-$automake_output
-EOF
- $ECHO "ERROR: $AUTOMAKE failed"
- exit 2
- fi # automake retry
- fi # automake ret = 0
- fi # need_automake
-} # end of manual_autogen
-
-
-#####################################
-# RECURSIVE_MANUAL_AUTOGEN FUNCTION #
-#####################################
-recursive_manual_autogen ( ) {
-
- # run the build preparation steps manually for this directory
- manual_autogen
-
- # for projects using recursive configure, run the build
- # preparation steps for the subdirectories.
- if [ ! "x$CONFIG_SUBDIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively configuring the following directories:"
- $VERBOSE_ECHO " $CONFIG_SUBDIRS"
- for dir in $CONFIG_SUBDIRS ; do
- $VERBOSE_ECHO "Processing recursive configure in $dir"
- cd "$START_PATH"
- cd "$dir"
-
- # new directory, prepare
- initialize
+ if [ -f COPYING.autogen_bak ]; then
+ cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
+ rm -f COPYING.autogen_bak
+ fi
+ if [ -f INSTALL.autogen_bak ]; then
+ cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
+ rm -f INSTALL.autogen_bak
+ fi
- # run manual steps for the subdir and any others below
- recursive_manual_autogen
- done
+ cd "$topdir"
fi
-}
-
-
-################################
-# run manual preparation steps #
-################################
-if [ "x$reconfigure_manually" = "xyes" ] ; then
- $ECHO
- $ECHO $ECHO_N "Preparing build ... $ECHO_C"
-
- recursive_manual_autogen
-fi
-
-
-#########################
-# restore and summarize #
-#########################
-cd "$START_PATH"
+done
-# restore COPYING and INSTALL from backup if necessary
-recursive_restore
+conf_flags=""
-# make sure we end up with a configure script
-config_ac="`locate_configure_template`"
-config="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`"
-if [ "x$config" = "x" ] ; then
- $VERBOSE_ECHO "Could not locate the configure template (from `pwd`)"
+if $want_maintainer_mode; then
+ conf_flags="--enable-maintainer-mode"
fi
-# summarize
-$ECHO "done"
-$ECHO
-if test "x$config" = "x" -o ! -f "$config" ; then
- $ECHO "WARNING: The $PROJECT build system should now be prepared but there"
- $ECHO "does not seem to be a resulting configure file. This is unexpected"
- $ECHO "and likely the result of an error. You should run $NAME_OF_AUTOGEN"
- $ECHO "with the --verbose option to get more details on a potential"
- $ECHO "misconfiguration."
+if test x$NOCONFIGURE = x; then
+ printbold Running $srcdir/configure $conf_flags "$@" ...
+ $srcdir/configure $conf_flags "$@" \
+ && echo Now type \`make\' to compile $PKG_NAME || exit 1
else
- $ECHO "The $PROJECT build system is now prepared. To build here, run:"
- $ECHO " $config"
- $ECHO " make"
+ echo Skipping configure process.
fi
-
-
-# Local Variables:
-# mode: sh
-# tab-width: 8
-# sh-basic-offset: 4
-# sh-indentation: 4
-# indent-tabs-mode: t
-# End:
-# ex: shiftwidth=4 tabstop=8