vf610twr: Fix typo in DRAM init

[platform/kernel/u-boot.git] / arch / powerpc / lib / board.c

diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 8b03d3a..4c9c3ac 100644 (file)
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -75,10 +75,6 @@
 extern int update_flash_size(int flash_size);
 #endif
 
-#if defined(CONFIG_SC3)
-extern void sc3_read_eeprom(void);
-#endif
-
 #if defined(CONFIG_CMD_DOC)
 void doc_init(void);
 #endif
@@ -226,6 +222,9 @@ static int init_func_spi(void)
 #if defined(CONFIG_WATCHDOG)
 int init_func_watchdog_init(void)
 {
+#if defined(CONFIG_MPC85xx)
+       init_85xx_watchdog();
+#endif
        puts("       Watchdog enabled\n");
        WATCHDOG_RESET();
        return 0;
@@ -343,13 +342,6 @@ void board_init_f(ulong bootflag)
 #ifdef CONFIG_PRAM
        ulong reg;
 #endif
-#ifdef CONFIG_DEEP_SLEEP
-       const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       struct ccsr_scfg *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
-       u32 start_addr;
-       typedef void (*func_t)(void);
-       func_t kernel_resume;
-#endif
 
        /* Pointer is writable since we allocated a register for it */
        gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -363,19 +355,12 @@ void board_init_f(ulong bootflag)
        memset((void *) gd, 0, sizeof(gd_t));
 #endif
 
+       gd->flags = bootflag;
+
        for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr)
                if ((*init_fnc_ptr) () != 0)
                        hang();
 
-#ifdef CONFIG_DEEP_SLEEP
-       /* Jump to kernel in deep sleep case */
-       if (in_be32(&gur->scrtsr[0]) & (1 << 3)) {
-               start_addr = in_be32(&scfg->sparecr[1]);
-               kernel_resume = (func_t)start_addr;
-               kernel_resume();
-       }
-#endif
-
 #ifdef CONFIG_POST
        post_bootmode_init();
        post_run(NULL, POST_ROM | post_bootmode_get(NULL));
@@ -547,7 +532,6 @@ void board_init_f(ulong bootflag)
        bd->bi_ipbfreq = gd->arch.ipb_clk;
        bd->bi_pcifreq = gd->pci_clk;
 #endif /* CONFIG_MPC5xxx */
-       bd->bi_baudrate = gd->baudrate; /* Console Baudrate     */
 
 #ifdef CONFIG_SYS_EXTBDINFO
        strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
@@ -803,21 +787,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #endif /* CONFIG_405GP, CONFIG_405EP */
 #endif /* CONFIG_SYS_EXTBDINFO */
 
-#if defined(CONFIG_SC3)
-       sc3_read_eeprom();
-#endif
-
 #if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
        mac_read_from_eeprom();
 #endif
 
-#ifdef CONFIG_HERMES
-       if ((gd->board_type >> 16) == 2)
-               bd->bi_ethspeed = gd->board_type & 0xFFFF;
-       else
-               bd->bi_ethspeed = 0xFFFF;
-#endif
-
 #ifdef CONFIG_CMD_NET
        /* kept around for legacy kernels only ... ignore the next section */
        eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
@@ -867,11 +840,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
        misc_init_r();
 #endif
 
-#ifdef CONFIG_HERMES
-       if (bd->bi_ethspeed != 0xFFFF)
-               hermes_start_lxt980((int) bd->bi_ethspeed);
-#endif
-
 #if defined(CONFIG_CMD_KGDB)
        WATCHDOG_RESET();
        puts("KGDB:  ");
@@ -914,7 +882,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #if defined(CONFIG_CMD_NET)
        WATCHDOG_RESET();
        puts("Net:   ");
-       eth_initialize(bd);
+       eth_initialize();
 #endif
 
 #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
@@ -992,14 +960,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
        kbd_init();
 #endif
 
-#ifdef CONFIG_MODEM_SUPPORT
-       {
-               extern int do_mdm_init;
-
-               do_mdm_init = gd->do_mdm_init;
-       }
-#endif
-
        /* Initialization complete - start the monitor */
 
        /* main_loop() can return to retry autoboot, if so just run it again. */